Download or read book Human Factors Engineering in the Design of Nuclear Power Plants IAEA Safety Standards Series No Ssg 51 written by International Atomic Energy Agency and published by . This book was released on 2019-08-31 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides recommendations and guidance for meeting Requirement 32 of IAEA Safety Standards Series No. SSR-2/1 (Rev. 1), Safety of Nuclear Power Plants: Design, for optimal operator performance involving systematic consideration of human factors, including the human machine interface (HMI). The Safety Guide provides a structured approach and guidance on application of human factors engineering (HFE) in the design of the HMI, which is the basis for human physical and cognitive processes in nuclear power plants. It applies to application of HFE in the design, operation and maintenance of the HMI for new plants, as well as for modifications of the HMI of existing plants.
Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety of Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.
Download or read book Basic Safety Principles for Nuclear Power Plants written by International Nuclear Safety Advisory Group and published by . This book was released on 1999 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present report is a revision of Safety Series No. 75-INSAG-3 (1988), updating the statements made on the objectives and principles of safe design and operation for electricity generating nuclear power plants. It includes the improvements made in the safety of operating nuclear power plants and identifies the principles underlying the best current safety policies to be applied in future plants. It presents INSAG's understanding of the principles underlying the best current safety policies and practices of the nuclear power industry.
Download or read book Human Factors Research and Nuclear Safety written by National Research Committee on Human Factors and published by National Academies Press. This book was released on 1988-01-01 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Encyclopedia of Ergonomics and Human Factors 3 Volume Set written by Informa Healthcare and published by CRC Press. This book was released on 2006-03-15 with total page 3656 pages. Available in PDF, EPUB and Kindle. Book excerpt: The previous edition of the International Encyclopedia of Ergonomics and Human Factors made history as the first unified source of reliable information drawn from many realms of science and technology and created specifically with ergonomics professionals in mind. It was also a winner of the Best Reference Award 2002 from the Engineering Libraries
Download or read book Verification and Validation of Complex Systems Human Factors Issues written by John A. Wise and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite its increasing importance, the verification and validation of the human-machine interface is perhaps the most overlooked aspect of system development. Although much has been written about the design and developmentprocess, very little organized information is available on how to verifyand validate highly complex and highly coupled dynamic systems. Inability toevaluate such systems adequately may become the limiting factor in our ability to employ systems that our technology and knowledge allow us to design. This volume, based on a NATO Advanced Science Institute held in 1992, is designed to provide guidance for the verification and validation of all highly complex and coupled systems. Air traffic control isused an an example to ensure that the theory is described in terms that will allow its implementation, but the results can be applied to all complex and coupled systems. The volume presents the knowledge and theory ina format that will allow readers from a wide variety of backgrounds to apply it to the systems for which they are responsible. The emphasis is on domains where significant advances have been made in the methods of identifying potential problems and in new testing methods and tools. Also emphasized are techniques to identify the assumptions on which a system is built and to spot their weaknesses.
Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1980 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook for Regulatory Inspectors of Nuclear Power Plants written by IAEA. and published by . This book was released on 2019 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Simulation and Digital Human Modeling written by Julia L. Wright and published by Springer Nature. This book was released on 2021-06-26 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a timely snapshot of modeling and simulation tools, including virtual and mixed-reality environment, for human factors research. It covers applications in healthcare and physical ergonomics, military and transportation systems, industrial monitoring, as well as economics and social sciences. Based on the AHFE 2021 International Conference on Human Factors and Simulation and the AHFE 2021 International Conference on Digital Human Modeling and Applied Optimization, held virtually on 25–29 July, 2021, from USA, the book offers a unique resource for modelling and simulation researchers seeking insights into human factors research and to human factors experts seeking reliable computational tools.
Download or read book Power plant Control and Instrumentation written by David Lindsley and published by IET. This book was released on 2000 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes control systems for boilers and heat-recovery steam generators (HRSGs) in a variety of applications, from waste-to-energy plants to combined-cycle gas-turbine power stations. Basics such as methods of connecting instruments are explained, and more advanced discussions of design features of distributed control systems are also included. At every stage, emphasis is given to the interactive nature of plants and to troubleshooting and problem solving. Includes chapter summaries. The author is Fellow of the Institution of Electrical Engineers, and the Institute of Marine Engineers, and is a Senior Member of the Instrument Society of America. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Handbook of Human Factors Testing and Evaluation written by Samuel G. Charlton and published by CRC Press. This book was released on 2019-09-25 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like the first edition, the revision of this successful Handbook responds to the growing need for specific tools and methods for testing and evaluating human-system interfaces. Indications are that the market for information on these tools and applications will continue to grow in the 21st century. One of the goals of offering a second edition is to expand and emphasize the application chapters, providing contemporary examples of human factors test and evaluation (HFTE) enterprises across a range of systems and environments. Coverage of the standard tools and techniques used in HFTE have been updated as well. New features of the Handbook of Human Factors Testing and Evaluation include: *new chapters covering human performance testing, manufacturing ergonomics, anthropometry, generative design methods, and usability testing; *updated tools and techniques for modeling, simulation, embedded testing, training assessment, and psychophysiological measurement; *new applications chapters presenting human factors testing examples in aviation and avionics, forestry, road safety, and software systems; and *more examples, illustrations, graphics and tables have been added. The orientation of the current work has been toward breadth of coverage rather than in-depth treatment of a few issues or techniques. Experienced testers will find much that is familiar, as well as new tools, creative approaches, and a rekindled enthusiasm. Newcomers will discover the diversity of issues, methods, and creative approaches that make up the field. In addition, the book is written in such a way that individuals outside the profession should learn the intrinsic value and pleasure in ensuring safe, efficient, and effective operation, as well as increased user satisfaction through HFTE.
Download or read book Handbook of Standards and Guidelines in Human Factors and Ergonomics Second Edition written by Waldemar Karwowski and published by CRC Press. This book was released on 2021-06-28 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an updated edition including new material in additional chapters, this one-of-a-kind handbook covers not only current standardization efforts, but also anthropometry and optimal working postures, ergonomic human computer interactions, legal protection, occupational health and safety, and military human factor principles. While delineating the crucial role that standards and guidelines play in facilitating the design of advantageous working conditions to enhance individual performance, the handbook suggests ways to expand opportunities for global economic and ergonomic development. This book features: Guidance on the design of work systems including tasks, equipment, and workspaces as well as the work environment in relation to human capacities and limitations Emphasis on important human factors and ergonomic standards that can be utilized to improve product and process to ensure efficiency and safety A focus on quality control to ensure that standards are met throughout the worldwide market
Download or read book Nuclear Safety written by and published by . This book was released on 1977 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Human Factors in Mining written by Mark S. Sanders and published by . This book was released on 1988 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Human Factors Engineering written by Christopher D. Wickens and published by . This book was released on 2014 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: For undergraduate courses in Human-Factors Engineering, Human-Computer Interaction, Engineering Psychology, or Human-Factors Psychology. Offering a somewhat more psychological perspective than other human factors books on the market, this text describes the capabilities and limitations of the human operator-both physical and mental-and how these should be used to guide the design of systems with which people interact. General principles of human-system interaction and design are presented, and included are specific examples of successful and unsuccessful interactions. It links theories of human performance that underlie the principles with real-world experience, without a heavy engineering-oriented perspective.
Download or read book Advances in Human Factors in Energy Oil Gas Nuclear and Electric Power Industries written by Sacit M. Cetiner and published by Springer. This book was released on 2016-07-26 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses human factors research in energy, an emphasis on human factors applications in design, construction, and operation of nuclear, electrical power generation, and oil and gas assets. It discusses advanced strategies in the optimization of human and environmental performance, as well as personal and process safety. The book covers a wealth of topics in design and operation management of both offshore and onshore facilities, including design of control rooms, front-end engineering design (FEED), criticality analysis, offshore transport, human contributions to accidents, cognitive bias in decision making, safety-critical human tasks, and many others. Based on the AHFE 2016 International Conference on Human Factors in Energy, held on July 27-31, 2016, in Walt Disney World®, Florida, USA, the book fills an important gap in the current literature, providing readers with state-of-the-art knowledge in human factors best-practice approaches across different types of industries and energy applications.
