Download or read book How to Build a 3D Printer from Scratch DIY Project corexy 3D Printer Indirect Extrusion written by Dr Ing Dan Marinescu and published by . This book was released on 2019-01-22 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, 80 pages, of technical documentation in English and German. Everything is described using clear and simple to follow steps. There is as little text possible, the focus being oriented to the graphical contend. You won't find stories about 3d printing or explanations about how a 3d printer looks like and what it is supposed to do - All that is very well covered in other publications, here the content is meant to be strictly oriented on the building, setting up and programming instructions needed in order to easily build and get it running a 3D printer with the following specifications: -CoreXY architecture-Aluminum frame 20 x 20 Nut 5-Guides from IGUS-Assembly parts from PETG (3D printed)-Frame dimensions 508 x 460 x 480 mm (L x B x H)-Total exterior dimensions: 550 x 460 x 780 mm (L x B x H)-Working volume: 220 x 220 x 240 mm (L x B x H)-The filament spool is inside-Print Bed automatic alignment-Permanent printing surface: 220 x 220 x 6 mm-Motherboard: Rumba Board-Titan Extruder with 0.4 mm nozzle-Heat bed: max. 130 ° C-Extrusion temperature: max. 300 ° C-Power supply: 230V / 24V 400W-Interface: USB or SD-Card-Precision in XY: 0.1 mm-Resolution: 0.05-0.3 mm-Firmware: Marlin> I M P O R T A N T

Download or read book How to Build a 3D Printer from Scratch DIY Project corexy 3D Printer Direct Extrusion written by Dr Ing Dan-Andrei Marinescu and published by Independently Published. This book was released on 2019-01-22 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, 80 pages, of technical documentation in English and German. Everything is described using clear and simple to follow steps. There is as little text possible, the focus being oriented to the graphical contend. You won't find stories about 3d printing or explanations about how a 3d printer looks like and what it is supposed to do - All that is very well covered in other publications, here the content is meant to be strictly oriented on the building, setting up and programming instructions needed in order to easily build and get it running a 3D printer with the following specifications: -CoreXY architecture-Aluminum frame 20 x 20 Nut 5 -Guides from IGUS-Assembly parts from PETG (3D printed)-Frame dimensions 508 x 460 x 480 mm (L x B x H)-Total exterior dimensions: 550 x 460 x 780 mm (L x B x H)-Working volume: 220 x 220 x 240 mm (L x B x H)-The filament spool is inside-Print Bed automatic alignment-Permanent printing surface: 220 x 220 x 6 mm-Motherboard: Rumba Board-Titan Extruder with 0.4 mm nozzle-Heat bed: max. 130 ° C-Extrusion temperature: max. 300 ° C-Power supply: 230V / 24V 400W-Interface: USB or SD-Card-Precision in XY: 0.1 mm-Resolution: 0.05-0.3 mm-Firmware: Marlin> I M P O R T A N T

Download or read book How to Build a 3D Printer from Scratch DIY Project corexy 3D Printer Double Extrusion written by Dr Ing Dan Marinescu and published by Independently Published. This book was released on 2019-01-25 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, 80 pages, of technical documentation in English and German. Everything is described using clear and simple to follow steps. There is as little text possible, the focus being oriented to the graphical contend. You won't find stories about 3d printing or explanations about how a 3d printer looks like and what it is supposed to do - All that is very well covered in other publications, here the content is meant to be strictly oriented on the building, setting up and programming instructions needed in order to easily build and get it running a 3D printer with the following specifications: -CoreXY architecture-Aluminum frame 20 x 20 Nut 5-Guides from IGUS-Assembly parts from PETG (3D printed)-Frame dimensions 508 x 460 x 480 mm (L x B x H)-Total exterior dimensions: 550 x 460 x 780 mm (L x B x H)-Working volume: 220 x 220 x 240 mm (L x B x H)-The filament spool is inside-Print Bed automatic alignment-Permanent printing surface: 220 x 220 x 6 mm-Motherboard: Rumba Board-Titan Extruder with 0.4 mm nozzle-Heat bed: max. 130 ° C-Extrusion temperature: max. 300 ° C-Power supply: 230V / 24V 400W-Interface: USB or SD-Card-Precision in XY: 0.1 mm-Resolution: 0.05-0.3 mm-Firmware: Marlin> I M P O R T A N T

Download or read book How to Build a 3D Printer written by Marinescu and published by Independently Published. This book was released on 2019-08-08 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: The EASY CoreXY M350 is a medium size 3D Printer born from the desire of making something simple to build, where only basic tools are needed but in the same time the expectation of the RepRap Makers are fully met: printing precision, rigid structure, safety, bed leveling, configurability and multi-filament printing.The 'corexy'-architecture is a very practically and cost effective solution for cartesian 3d printers and that is the reason why I've preferred this concept. The model 'M350' earned his name from the fact that all the aluminum profiles from the frame are exactly 350mm long - this simplifies already from beginning a lot of aspects concerning the building of the frame.The Book is a building manual which describes a strait forward process with easy to follow steps. There are no stories about 3d printing, the focus is set up on printing the necessary components, mechanical construction, electrical harness, wiring diagram and firmware. Everything is described using pictures from 3d and from reality, the text is in simple plain English.There were used as much as possible standard components for RepRap 3d printers - this gives the complete freedom when it comes on deciding from where to purchase the needed components. The number and dimension of the 3d-printed elements were kept at minimum in order to optimize the time and cost of printing process

Download or read book Building Manual 3D Printer Build It Yourself CoreXY V1 0 Indirect Extrusion written by Ing. Dan-Andrei Marinescu and published by . This book was released on 2018-11-15 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: -

Download or read book Building Manual 3D Printer Build It Yourself CoreXY V1 1 Direct Extrusion written by Ing. Dan-Andrei Marinescu and published by . This book was released on 2018-11-14 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, 80 pages, BUILDING MANUAL in English and German that will provided you every information needed in order to easily build and get it running a 3D printer with the following specifications:-CoreXY architecture-Aluminum frame 20 x 20 Nut 5 -Guides from IGUS-Assembly parts from PETG (3D printed)-Frame dimensions 508 x 460 x 480 mm (L x B x H)-Total exterior dimensions: 550 x 460 x 780 mm (L x B x H)-Working volume: 220 x 220 x 240 mm (L x B x H)-The filament spool is inside-Print Bed automatic alignment-Permanent printing surface: 220 x 220 x 6 mm-Motherboard: Rumba Board-Titan Extruder with 0.4 mm nozzle-Heat bed: max. 130 ° C-Extrusion temperature: max. 300 ° C-Power supply: 230V / 24V 400W-Interface: USB or SD-Card-Precision in XY: 0.1 mm-Resolution: 0.05-0.3 mm-Firmware: Marlin> I M P O R T A N T

Download or read book Practical 3D Printers written by Brian Evans and published by Apress. This book was released on 2012-09-25 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Desktop or DIY 3D printers are devices you can either buy preassembled as a kit, or build from a collection of parts to design and print physical objects including replacement household parts, custom toys, and even art, science, or engineering projects. Maybe you have one, or maybe you're thinking about buying or building one. Practical 3D Printers takes you beyond how to build a 3D printer, to calibrating, customizing, and creating amazing models, including 3D printed text, a warship model, a robot platform, windup toys, and arcade-inspired alien invaders. You'll learn about the different types of personal 3D printers and how they work; from the MakerBot to the RepRap printers like the Huxley and Mendel, as well as the whiteAnt CNC featured in the Apress book Printing in Plastic. You'll discover how easy it is to find and design 3D models using web-based 3D modeling, and even how to create a 3D model from a 2D image. After learning the basics, this book will walk you through building multi-part models with a steampunk warship project, working with meshes to build your own action heroes, and creating an autonomous robot chassis. Finally, you'll find even more bonus projects to build, including wind-up walkers, faceted vases for the home, and a handful of useful upgrades to modify and improve your 3D printer.

Download or read book High Tech DIY Projects with 3D Printing written by Maggie Murphy and published by The Rosen Publishing Group, Inc. This book was released on 2014-07-15 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: The possibilities of what can be made with a 3D printer are endless. This guide presents the basics of 3D printing, beginner’s projects, and additional resources to set young makers on their way to becoming masters. With up-to-the-minute information, simple language, and hands-on projects, this is the prefect launching point into the exciting world of 3D printing.

Download or read book 3D Printing with Delta Printers written by Charles Bell and published by Apress. This book was released on 2015-07-14 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Do you find yourself wondering what the fuss is about a delta 3D printer? Perhaps you’ve decided to buy one but all of your 3D printing friends are busily perfecting their Cartesian printers. Maybe you find yourself stymied by the fact that your delta printer has very different needs for setup, configuration, calibration, and maintenance than Cartesian printers. 3D Printing with Delta Printers contains detailed descriptions of the innovative delta design including unique hardware, software, and maintenance requirements. The book also covers tips for building your own delta printer as well as examples of common enhancements. This book will enable you to build, configure, and enhance your delta printer. The topics covered will reveal the often-mysterious nuances of the delta design that will enable your printer to compete with the best of what your 3D printer friends can build.

Download or read book Additive Manufacturing Hybrid Processes for Composites Systems written by António Torres Marques and published by Springer Nature. This book was released on 2020-04-27 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the emerging additive manufacturing technology and its applications beyond state-of-the-art, fibre-reinforced thermoplastics. It also discusses the development of a hybrid, integrated process that combines additive and subtractive operations in a single-step platform, allowing CAD-to-Part production with freeform shapes using long or continuous fibre-reinforced thermoplastics. The book covers the entire value chain of this next-generation technology, from part design and materials composition to transformation stages, product evaluation, and end-of-life studies. Moreover, it addresses the following engineering issues: • Design rules for hybrid additive manufacturing; • Thermoplastic compounds for high-temperature and -strength applications; • Advanced extrusion heads and process concepts; • Hybridisation strategies; • Software ecosystems for hAM design, pre-processing, process planning, emulating and multi-axis processing; • 3D path generators for hAM based on a multi-objective optimisation algorithm that matches the recent curved adaptive slicing method with a new transversal scheme; • hAM parameters, real-time monitoring and closed-loop control; • Multiparametric nondestructive testing (NDT) tools customised for FRTP AM parts; • Sustainable manufacturing processes validated by advanced LCA/LCC models.

Download or read book 3D Concrete Printing Technology written by Jay G. Sanjayan and published by Butterworth-Heinemann. This book was released on 2019-02-15 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Concrete Printing Technology provides valuable insights into the new manufacturing techniques and technologies needed to produce concrete materials. In this book, the editors explain the concrete printing process for mix design and the fresh properties for the high-performance printing of concrete, along with commentary regarding their extrudability, workability and buildability. This is followed by a discussion of three large-scale 3D printings of ultra-high performance concretes, including their processing setup, computational design, printing process and materials characterization. Properties of 3D-printed fiber-reinforced Portland cement paste and its flexural and compressive strength, density and porosity and the 3D-printing of hierarchical materials is also covered. - Explores the factors influencing the mechanical properties of 3D printed products out of magnesium potassium phosphate cement material - Includes methods for developing Concrete Polymer Building Components for 3D Printing - Provides methods for formulating geopolymers for 3D printing for construction applications

Download or read book The Future of Transdisciplinary Design written by Lucienne Blessing and published by Springer. This book was released on 2016-02-13 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art research in the field of transdisciplinary design, and highlights the challenges and issues from the perspectives of processes, people and products in transdisciplinary product design and development. It collates research papers resulting from the ‘Workshop on the Future of Transdisciplinary Design’ written by leading researchers in engineering design and product development. The papers provide examples and case studies from existing practices, as well as future perspectives towards the development of the complex and ever-changing domains of engineering design and product development, with an emphasis on transdisciplinarity. ‘The Future of Transdisciplinary Design’ contains a selection of research papers in the following areas related to transdisciplinary design: -Approaches -Tools and methods -Management and collaboration -Distributed and culturally diverse teams -Modeling, representing and managing information -Education and training A transdisciplinary design process is a design process involving the integrated use of knowledge, methods and tools from various disciplines. Design of product/services increasingly requires cross-disciplinary collaboration, and integration of specialized knowledge from different disciplines is necessary to tackle complex and large scale design problems. This book provides a valuable reference to researchers, professionals and PhD students in the field of engineering design and product development. Design practitioners and those involved in product development in the manufacturing industry will equally benefit from the research presented as well as future advances in this research.

Download or read book Digital Fabrication with Cement Based Materials written by Nicolas Roussel and published by Springer Nature. This book was released on 2022-01-12 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the work of the RILEM Technical Committee 276-DFC: Digital fabrication with cement-based materials. The most important outcomes of the technical committee are presented. First, a unified process classification for digital fabrication with concrete is proposed, discussed and illustrated. Then, a state of the art of the testing methods (both at a material and structural level and in the fresh and hardened state) is provided. The gathered knowledge is expected to form the foundation of some quality control procedures for fresh properties along with hardened properties and service life performance. The book will benefit academics, practitioners, industry and standardization committees interested in digital fabrication with cement-based materials.

Download or read book Reusability of Facemasks During an Influenza Pandemic written by Institute of Medicine and published by National Academies Press. This book was released on 2006-08-24 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Any strategy to cope with an influenza pandemic must be based on the knowledge and tools that are available at the time an epidemic may occur. In the near term, when we lack an adequate supply of vaccine and antiviral medication, strategies that rely on social distancing and physical barriers will be relatively more prominent as means to prevent spread of disease. The use of respirators and facemasks is one key part of a larger strategy to establish barriers and increase distance between infected and uninfected individuals. Respirators and facemasks may have a role in both clinical care and community settings. Reusability of Facemasks During an Influenza Pandemic: Facing the Flu answers a specific question about the role of respirators and facemasks to reduce the spread of flu: Can respirators and facemasks that are designed to be disposable be reused safely and effectively? The committee-assisted by outstanding staff-worked intensively to review the pertinent literature; consult with manufacturers, researchers, and medical specialists; and apply their expert judgment. This report offers findings and recommendations based on the evidence, pointing to actions that are appropriate now and to lines of research that can better inform future decisions.

Download or read book Beyond Oil written by Kenneth S. Deffeyes and published by Hill and Wang. This book was released on 2005-03-15 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: With world oil production about to peak and inexorably head toward steep decline, what fuels are available to meet rising global energy demands? That question, once thought to address a fairly remote contingency, has become ever more urgent, as a spate of books has drawn increased public attention to the imminent exhaustion of the economically vital world oil reserves. Deffeyes, a geologist who was among the first to warn of the coming oil crisis, now takes the next logical step and turns his attention to the earth's supply of potential replacement fuels. In Beyond Oil, he traces out their likely production futures, with special reference to that of oil, utilizing the same analytic tools developed by his former colleague, the pioneering petroleum-supply authority M. King Hubbert. The book includes chapters on natural gas, coal, tar sands and heavy oils, oil shale, uranium, and (although not strictly an energy resource itself) hydrogen. A concluding chapter on the overall energy picture covers the likely mix of energy sources the world can rely on for the near-term future, and the special roles that will need to be played by conservation, high-mileage diesel automobiles, nuclear power plants, and wind-generated electricity. An acknowledged expert in the field, Deffeyes brings a deeply informed, yet optimistic approach to bear on the growing debate. His main concern is not our long-term adaptation to a world beyond oil but our immediate future: "Through our inattention, we have wasted the years that we might have used to prepare for lessened oil supplies. The next ten years are critical."

Download or read book Women in 3D Printing written by Stacey M DelVecchio and published by Springer Nature. This book was released on 2021-07-20 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides insights into the possibilities, realities and challenges of the rapidly evolving world of 3D printing or additive manufacturing. Contributors cover the applications for 3D printing, available materials, research, and the business of additive manufacturing from start-ups to Fortune 500 companies. As an important part of the Women in Science and Engineering book series, the work highlights the contribution of women leaders in additive manufacturing, inspiring women and men, girls and boys to enter and apply themselves to world of 3D printing and be a part of bringing the true potential of 3D printing to fruition. The book features contributions of prominent female engineers, scientists, business and technology leaders in additive manufacturing from academia, industry and government labs. Provides insight into women’s contributions to the field of additive manufacturing; Presents information from academia, research, government labs and industry into advances and applications in the rapidly evolving and growing field of 3D printing; Includes applications in industries such as medicine, aerospace, and automotive.

Download or read book Personal Fabrication written by Patrick Baudisch and published by . This book was released on 2017-05-08 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: While fabrication technologies have been in use in industry for several decades, expiring patents have recently allowed the technology to spill over to technology-enthusiastic "makers." Personal Fabrication looks at the massive, disruptive changes that are likely to be seen in interactive computing, as well as to computing as a whole. It discusses six main challenges that need to be addressed for this change to take place, and explains researchers in HCI will play a key role in tackling these challenges.