Download or read book Tool Steels written by Rafael A. Mesquita and published by CRC Press. This book was released on 2016-12-19 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handy book provides a single, up-to-date source of information for increasing the life of tool steels through optimized design and manufacturing. Supplying a solid understanding of the metallurgy involved, the text explains how material compositions, manufacturing processes, heat treatments, surface hardening techniques, and coatings affect tool steel properties, grades, and performance. It also explores real-life case studies and failure analyses, offering examples of die-life parameters and hints for modifying tool steels and heat treatments during cutting or forming processes. While the book offers deep coverage of properties, microstructure, and manufacturing, its focus is on describing the performance of each application of this special class of ferrous materials. Provides a single, up-to-date source of information for increasing the life of tool steels through optimized design and manufacturing. Explains how material compositions, manufacturing processes, heat treatments, surface hardening techniques, and coatings affect tool steel properties, grades, and performance. Supplies a solid understanding of the metallurgy involved in tool steel manufacturing, machining, hot and cold working, and molding. Offers examples of die-life parameters and hints for modifying tool steels and heat treatments during cutting or forming processes. Includes real-life case studies and failure analyses from the Villares Metals plant in Brazil.

Download or read book The Tool Steel Guide written by James A. Szumera and published by Industrial Press Inc.. This book was released on 2003 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: For tool designers, tool and die makers, machinists, and apprentices, Szumera presents specification, heat treatments, applications for all types of die and mold steels, and suggestions on how to prepare steels for machining and heat treatment. He does not provide a bibliography. Annotation (c) Boo

Download or read book Tool Steels 5th Edition written by George Adam Roberts and published by ASM International. This book was released on 1998 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hot Work Tool Steel written by Joachim Schlegel and published by Springer Nature. This book was released on 2024-01-03 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world of steel is amazingly diverse and so complex that it is not easy to keep track of in practice. In the form of portraits of selected steels and steel groups, this world of steel is to be brought closer to the reader; compact, understandable, informative, structured with examples from practice and suitable for reference. Hot work tool steels are a group of alloyed steels with high hot strength suitable for tools. These can withstand surface temperatures of more than 600 °C in use. For this purpose, they are optimally adapted to the most diverse requirements, especially for tools used in hot forming and die casting. Important are the chemical compositions, methods of production and processing as well as their properties or the material data of hot work tool steels, which are briefly and clearly presented in this book. The contents · The history of hot work tool steels · Designations, chemical compositions, grades, microstructure and properties · Production (melting and powder metallurgy), heat and surface treatments The target groups Trainees in metal professions Students, practitioners, engineers in steel production, forming and production technology, in steel, metal and tool construction and in the steel trade

Download or read book Tool Steels written by Rafael A. Mesquita and published by CRC Press. This book was released on 2016-12-19 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handy book provides a single, up-to-date source of information for increasing the life of tool steels through optimized design and manufacturing. Supplying a solid understanding of the metallurgy involved, the text explains how material compositions, manufacturing processes, heat treatments, surface hardening techniques, and coatings affect tool steel properties, grades, and performance. It also explores real-life case studies and failure analyses, offering examples of die-life parameters and hints for modifying tool steels and heat treatments during cutting or forming processes. While the book offers deep coverage of properties, microstructure, and manufacturing, its focus is on describing the performance of each application of this special class of ferrous materials. Provides a single, up-to-date source of information for increasing the life of tool steels through optimized design and manufacturing. Explains how material compositions, manufacturing processes, heat treatments, surface hardening techniques, and coatings affect tool steel properties, grades, and performance. Supplies a solid understanding of the metallurgy involved in tool steel manufacturing, machining, hot and cold working, and molding. Offers examples of die-life parameters and hints for modifying tool steels and heat treatments during cutting or forming processes. Includes real-life case studies and failure analyses from the Villares Metals plant in Brazil.

Download or read book Hydrostatic Extrusion written by N. Inoue and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to be a reference text on hydrostatic extru sion, a multidisciplinary technology involving the forming process of materials, tribology, high pressure engineering and so forth. Until now only one book bearing the title of hydrostatic extrusion, by Prof. Alexander and Dr. Lengyel, has been published since 1971. Although there are chapters on hydrostatic extrusion in such books as THE MECHANICAL BEHAVIOUR OF MATERIALS UNDER PRESSURE edited by Dr. Pugh, METAL FORMING by Prof. Avitzur and HIGH PRESSURE TECHNOLOGY by Drs. Spain and Paauwe, it is regrettable that no up~to-date reference books on hydro static extrusion are available. As is well known, hydrostatic extrusion is a nearly-ideal lubricated extrusion. Its advantages have been demonstrated by laboratory research in the past two decades, yet many manufacturers, however, still hesitate to adopt the technology in their plants. Their hesitation is certainly due to the lack of exact information on the process and its equipment and also to 'their unfamiliarity with the actual method of operation. In order to provide a useful introduction to the subject for engi neers who work in industries which plan to employ this technique and also to give exact and reliable information on the durability and perfo- ance of production facilities, as well as the capabilities of the process and the properties of extruded products, we decided to publish this book. Starting with theories and computational methods, the processes of cold, warm and hot hydrostatic extrusion are described by experts in their respective fields.

Download or read book The Selection and Hardening of Tool Steels written by Lawrence H. Seabright and published by . This book was released on 1968 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fatigue under Thermal and Mechanical Loading Mechanisms Mechanics and Modelling written by J. Bressers and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium "Fatigue under Thermal and Mechanical Loading", held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies.

Download or read book Hot Work Tool Steels written by Carpenter Technology Corporation. Carpenter Steel Division and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tool Steel Handbook written by Allegheny Ludlum Steel Corporation and published by . This book was released on 1956 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tool Steel for the Non metallurgist written by Crucible Steel Company of America and published by . This book was released on 1955 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Physico chemical Study of Hot Work Tool Steels written by Edwin A. Brophy and published by . This book was released on 1934 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Metallurgy of Tool Steels written by Peter Payson and published by . This book was released on 1962 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chromium martensitic hot work tool steels damage performance and microstructure written by Johnny Sjöström and published by . This book was released on 2004 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tool Steels written by Rafael A. Mesquita and published by CRC Press. This book was released on 2016-12-19 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handy book provides a single, up-to-date source of information for increasing the life of tool steels through optimized design and manufacturing. Supplying a solid understanding of the metallurgy involved, the text explains how material compositions, manufacturing processes, heat treatments, surface hardening techniques, and coatings affect tool steel properties, grades, and performance. It also explores real-life case studies and failure analyses, offering examples of die-life parameters and hints for modifying tool steels and heat treatments during cutting or forming processes. While the book offers deep coverage of properties, microstructure, and manufacturing, its focus is on describing the performance of each application of this special class of ferrous materials. Provides a single, up-to-date source of information for increasing the life of tool steels through optimized design and manufacturing. Explains how material compositions, manufacturing processes, heat treatments, surface hardening techniques, and coatings affect tool steel properties, grades, and performance. Supplies a solid understanding of the metallurgy involved in tool steel manufacturing, machining, hot and cold working, and molding. Offers examples of die-life parameters and hints for modifying tool steels and heat treatments during cutting or forming processes. Includes real-life case studies and failure analyses from the Villares Metals plant in Brazil.

Download or read book Bethlehem Tool Steels written by Bethlehem Steel Company and published by . This book was released on 1958 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tool Steel A Concise Handbook on Tool Steel in General Its Treatment in the Operations of Forging Annealing Hardening Tempering and the Appliances Therefor written by Otto Thallner and published by Read Books Ltd. This book was released on 2017-09-06 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: This vintage book contains a comprehensive handbook on the treatment of tool-steel in forging, annealing, hardening, tempering, etc. Profusely illustrated and full of useful, timeless information, this volume will be of considerable utility to those with an interest in metal work and the manufacturing of steel. Many vintage books such as this are increasingly scarce and expensive. We are republishing this volume now in an affordable, modern edition complete with a specially commissioned new introduction on metal work. First published in 1902. Contents include: I. Composition of Tool-Steel and Its Classification According to It II. Classification of Tool-Steel According to the Degree of Hardness and the Purpose for Which It is to be Used III.Observations on the External Appearance of Commercial Tool-Steel IV. Observations on the Fracture of Steel, with Regard to the Structure in the Hardened and Non-Hardened States V. Practice of the Fire-Treatment of Steel VI. Appliances for Annealing Steel VII. Appliances for Hardening Steel VIII. Hardening of Tool-Steel in General IX. Hardening of Tools Which are to be Hardened in their Entirety X. Hardening of Tools Which are only to be Partially Hardened XI. Cooling of Tools in Hardening and Devices for this Purpose XII. Liquids Used in Quenching Steel XIII. Tempering of Hardened Steel, and Devices for this Purpose XIV. Straightening Tools XV. Case-Hardening and Preventatives Against Superficial Decarbonization and Overheating XVI. Welding of Steel XVII. Regeneration of Steel Which has Been Spoiled in the Fire XVIII. Investigations of Defects of Hardened Tools XIX. Improving Properties of the Strength of Steel