Download or read book Hot Isostatic Pressing Theory and Applications written by M. Koizumi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: The HIP process was originally devised for diffusion bonding of nuclear fuel elements at Battelle Memorial Institute in the United States in the mid-1950s. This innovative technique has been a subject of global research and development, and was applied to the cemented carbide industry at the end of the 1960s by ASEAj Sandvik. Since then this process has been applied to many kinds of industrial materials, including tool steel, superalloys and electronic and ceramic materials. In very recent years, HIPing technology has been applied even to R& D of high temperature superconducting materials and of a composite process with self combustion reaction. On this occasion we should recognize that the 3rd HIP Conference was held in the midst of such progress of HIP technology, and that it was the first international conference which was held in Asia in the field of HIP and CIP technologies. The conference was very successful, with about 250 participants from 13 countries, including Japan. About 90 presentations, including nine invited lecturers, 44 oral and 35 poster presentations, were offered, and all contributions were at a high level and contained valuable results which had been attained in recent years.

Download or read book Hot Isostatic Processing written by H.V. Atkinson and published by Springer. This book was released on 1991-12-31 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to provide an introduction to the increasingly exploited technology of Hot Isostatic Pressing (HIPping). It is intended for two audiences. Firstly, the manufacturing or design engineer who may not have a materials science background, but who needs to develop an appreciation of the scope of the HIPping process. Secondly, the engineering or materials undergraduate who needs to understand how HIPping as a modern manufacturing method can offer potential improvements to material properties relative to more conventional techniques.

Download or read book Isostatic Pressing written by M. Koizumi and published by Springer Science & Business Media. This book was released on 1991-06-30 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated volume is intended as a reference text on the technology of hot and cold isostatic pressing together with applications for development of new materials.

Download or read book Modeling and Optimization in Manufacturing written by Catalin I. Pruncu and published by John Wiley & Sons. This book was released on 2021-07-19 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the state-of-the-art in multiscale modeling and optimization in manufacturing from two leading voices in the field Modeling and Optimization in Manufacturing delivers a comprehensive approach to various manufacturing processes and shows readers how multiscale modeling and optimization processes help improve upon them. The book elaborates on the foundations and applications of computational modeling and optimization processes, as well as recent developments in the field. It offers discussions of manufacturing processes, including forming, machining, casting, joining, coating, and additive manufacturing, and how computer simulations have influenced their development. Examples for each category of manufacturing are provided in the text, and industrial applications are described for the reader. The distinguished authors also provide an insightful perspective on likely future trends and developments in manufacturing modeling and optimization, including the use of large materials databases and machine learning. Readers will also benefit from the inclusion of: A thorough introduction to the origins of manufacturing, the history of traditional and advanced manufacturing, and recent progress in manufacturing An exploration of advanced manufacturing and the environmental impact and significance of manufacturing Practical discussions of the economic importance of advanced manufacturing An examination of the sustainability of advanced manufacturing, and developing and future trends in manufacturing Perfect for materials scientists, mechanical engineers, and process engineers, Modeling and Optimization in Manufacturing will also earn a place in the libraries of engineering scientists in industries seeking a one-stop reference on multiscale modeling and optimization in manufacturing.

Download or read book Hot Isostatic Pressing 93 written by L. Delaey and published by Newnes. This book was released on 2012-12-02 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various topics related to Hot Isostatic Pressing are presented in this volume. As well as papers on more general aspects of HIPing, the papers are organised into four groups: metals and alloys, ceramics, HIP-engineering, and HIP-fundamentals. Castings, powder metallurgy, intermetallics, surface engineering and diffusion bounding are covered in the first group. The papers on ceramics give special attention to HIPing of structural and functional ceramics as well as to ceramic composites. Some interesting HIP-engineering innovations are presented on HIP equipment and HIP-technology. The papers which discuss HIP-fundamentals focus around materials modelling and component modelling.

Download or read book Advances in Ceramic Matrix Composites written by I M Low and published by Woodhead Publishing. This book was released on 2018-01-20 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Ceramic Matrix Composites, Second Edition, delivers an innovative approach to ceramic matrix composites, focusing on the latest advances and materials developments. As advanced ceramics and composite materials are increasingly utilized as components in batteries, fuel cells, sensors, high-temperature electronics, membranes and high-end biomedical devices, and in seals, valves, implants, and high-temperature and wear components, this book explores the substantial progress in new applications. Users will gain knowledge of the latest advances in CMCs, with an update on the role of ceramics in the fabrication of Solid Oxide Fuel Cells for energy generation, and on natural fiber-reinforced eco-friendly geopolymer and cement composites. The specialized information contained in this book will be highly valuable to researchers and graduate students in ceramic science, engineering and ceramic composites technology, and engineers and scientists in the aerospace, energy, building and construction, biomedical and automotive industries. Provides detailed coverage of parts and processing, properties and applications Includes new developments in the field, such as natural fiber-reinforced composites and the use of CMCs in Solid Oxide Fuel Cells (SOFCs) Presents state-of-the-art research, enabling the reader to understand the latest applications for CMCs

Download or read book Handbook of Metal Injection Molding written by Donald F Heaney and published by Woodhead Publishing. This book was released on 2018-11-01 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal injection molding combines the most useful characteristics of powder metallurgy and plastic injection molding to facilitate the production of small, complex-shaped metal components with outstanding mechanical properties. Handbook of Metal Injection Molding, Second Edition provides an authoritative guide to this important technology and its applications. Building upon the success of the first edition, this new edition includes the latest developments in the field and expands upon specific processing technologies. Part one discusses the fundamentals of the metal injection molding process with chapters on topics such as component design, important powder characteristics, compound manufacture, tooling design, molding optimization, debinding, and sintering. Part two provides a detailed review of quality issues, including feedstock characterisation, modeling and simulation, methods to qualify a MIM process, common defects and carbon content control. Special metal injection molding processes are the focus of part three, which provides comprehensive coverage of micro components, two material/two color structures, and porous metal techniques, as well as automation of the MIM process and metal injection molding of large components. Finally, part four explores metal injection molding of particular materials, and has been expanded to include super alloys, carbon steels, precious metals, and aluminum. With its distinguished editor and expert team of international contributors, the Handbook of Metal Injection Molding is an essential guide for all those involved in the high-volume manufacture of small precision parts, across a wide range of high-tech industries such as microelectronics, biomedical and aerospace engineering. Provides an authoritative guide to metal injection molding and its applications Discusses the fundamentals of the metal injection molding processes and covers topics such as component design, important powder characteristics, compound manufacture, tooling design, molding optimization, debinding, and sintering Comprehensively examines quality issues such as feedstock characterization, modeling and simulation, common defects and carbon content control

Download or read book Fundamentals of Magnetic Thermonuclear Reactor Design written by Vasilij A. Glukhikh and published by Woodhead Publishing. This book was released on 2018-05-21 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Magnetic Thermonuclear Reactor Design is a comprehensive resource on fusion technology and energy systems written by renowned scientists and engineers from the Russian nuclear industry. It brings together a wealth of invaluable experience and knowledge on controlled thermonuclear fusion (CTF) facilities with magnetic plasma confinement – from the first semi-commercial tokamak T-3, to the multi-billion international experimental thermonuclear reactor ITER, now in construction in France. As the INTOR and ITER projects have made an immense contribution in the past few decades, this book focuses on its practical engineering aspects and the basics of technical physics and electrical engineering. Users will gain an understanding of the key ratios between plasma and technical parameters, design streamlining algorithms and engineering solutions. Written by a team of qualified experts who have been involved in the design of thermonuclear reactors for over 50 years Outlines the most important features of the ITER project in France which is building the largest tokamak, including the design, material selection, safety and economic considerations Includes data on how to design magnetic fusion reactors using CAD tools, along with relevant regulatory documents

Download or read book Gas pressure Bonding written by S. J. Paprocki and published by . This book was released on 1961 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hot Isostatic Pressing written by Pranesh Dayal and published by Materials Research Forum LLC. This book was released on 2019-03-15 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot Isostatic Pressing (HIP) has important applications in advanced materials manufacturing, automotive, aerospace, oil and gas industries, power generation, and medical and nuclear fields. The symposium focused on HIP applications in such areas as material optimization, radioactive nuclear waste, cast aluminum alloys, ceramic materials, superalloys, manufacturing of turbine blisks, densification of additive manufactured parts, diffusion welding of dissimilar metals and alloys, heat treatment inside the HIP unit, turbopump components, improved tooling materials, valve spindles for engines, Ni-base superalloys, titanium aluminide, stainless steels, metal matrix composites, phase transformations, uniform load cooling equipment, duplex steel, diamond/SiC composites, large hot zone units, additive manufacturing, efficient modeling, reactor vessel fabrication, electron beam welding, superconducting magnet structures.

Download or read book Densification of Metal Powders During Sintering written by V. A. Invenson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering of powder metal compacts is one of the basic oper ations in powder metallurgy. The useful properties of a machine part are obtained after considerable densification of the sintered material. Although the mechanical properties of the part depend on other structural factors besides porosity, porosity is the main factor. Usually, the practical problem in sintering is to obtain a part with the desired or permissible porosity. Thus, knowledge of the laws governing densification and its final result is neces sary to control this process in the production of powder metal parts. The laws governing densification are also important for a more exact physical theory of sintering, which is still in the initial stages of its development. Such processes as the change in the density of lattice defects and the flow of crystalline substances during sintering have not yet received a complete physical inter pretation. Analysis of the laws of sintering may provide addition al material for more complete phenomenological characteristics of these processes that will be useful for further development of theoretical concepts of the flow of imperfect crystals under small loads. Although a substantial amount of experimental material has been accumulated, generalizations are still difficult.

Download or read book Hot Isostatic Processing written by H. D. Hanes and published by . This book was released on 1979 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hot Isostatic Pressing written by Brian Welk and published by Materials Research Forum LLC. This book was released on 2023-12-15 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents recent advances in the use of hot isostatic pressing (HIP) techniques in the manufacture and processing of materials. Keywords: Turbomachinery, Heat Exchangers, Hydrogen Electrolyzers, Duplex Stainless Steels, Naval Nuclear Applications, Rapid L-PBF Printing, Combined Manufacturing and Heat Treatment, Nickel-Based Alloy, Magnetically Soft FeSi6.5 Powder, GH4169 Superalloy, Additive Manufacturing, Tungsten Alloy, Three-Dimensional Flow Path Structure, Accident Tolerant Fuel Cladding, Simulation-Based Manufacturing, Modelling of Powder Filling, Capsule Filling, Porous Materials, Large Complex Shape Parts, Shear Stress Coefficient, Capsule Material Strain Hardening.

Download or read book Advances in Industrial and Production Engineering written by Kripa Shanker and published by Springer. This book was released on 2019-04-23 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2018). The book discusses different topics of industrial and production engineering such as sustainable manufacturing systems, computer-aided engineering, rapid prototyping, manufacturing management and automation, metrology, manufacturing process optimization, casting, welding, machining, and machine tools. The contents of this book will be useful for researchers as well as professionals.

Download or read book TMS 2022 151st Annual Meeting Exhibition Supplemental Proceedings written by The Minerals, Metals & Materials Society and published by Springer Nature. This book was released on 2022-03-11 with total page 1597 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from the 151st Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.

Download or read book Advances in Powder Metallurgy written by Isaac Chang and published by Elsevier. This book was released on 2013-08-31 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy (PM) is a popular metal forming technology used to produce dense and precision components. Different powder and component forming routes can be used to create an end product with specific properties for a particular application or industry. Advances in powder metallurgy explores a range of materials and techniques used for powder metallurgy and the use of this technology across a variety of application areas. Part one discusses the forming and shaping of metal powders and includes chapters on atomisation techniques, electrolysis and plasma synthesis of metallic nanopowders. Part two goes on to highlight specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys. Part three reviews the manufacture and densification of PM components and explores joining techniques, process optimisation in powder component manufacturing and non-destructive evaluation of PM parts. Finally, part four focusses on the applications of PM in the automotive industry and the use of PM in the production of cutting tools and biomaterials. Advances in powder metallurgy is a standard reference for structural engineers and component manufacturers in the metal forming industry, professionals working in industries that use PM components and academics with a research interest in the field. Discusses the forming and shaping of metal powders and includes chapters on atomisation techniques Highlights specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys Reviews the manufacture and densification of PM components and explores joining techniques

Download or read book Spark Plasma Sintering of Materials written by Pasquale Cavaliere and published by Springer. This book was released on 2019-02-18 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes spark plasma sintering (SPS) in depth. It addresses fundamentals and material-specific considerations, techniques, and applications across a broad spectrum of materials. The book highlights methods used to consolidate metallic or ceramic particles in very short times. It highlights the production of complex alloys and metal matrix composites with enhanced mechanical and wear properties. Emphasis is placed on the speed of the sintering processes, uniformity in product microstructure and properties, reduced grain growth, the compaction and sintering of materials in one processing step, various materials processing, and high energy efficiency. Current and potential applications in space science and aeronautics, automation, mechanical engineering, and biomedicine are addressed throughout the book.