Download or read book Hot Electrons in Semiconductors written by N. Balkan and published by . This book was released on 1998 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Under certain conditions electrons in a semiconductor become much hotter than the surrounding crystal lattice. When this happens, Ohm's Law breaks down: current no longer increases linearly with voltage and may even decrease. Hot electrons have long been a challenging problem in condensed matter physics and remain important in semiconductor research. Recent advances in technology have led to semiconductors with submicron dimensions, where electrons can be confined to two (quantum well), one (quantum wire), or zero (quantum dot) dimensions. In these devices small voltages heat electrons rapidly, inducing complex nonlinear behavior; the study of hot electrons is central to their further development. This book is the only comprehensive and up-to-date coverage of hot electrons. Intended for both established researchers and graduate students, it gives a complete account of the historical development of the subject, together with current research and future trends, and covers the physics of hot electrons in bulk and low-dimensional device technology. The contributions are from leading scientists in the field and are grouped broadly into five categories: introduction and overview; hot electron-phonon interactions and ultra-fast phenomena in bulk and two-dimensional structures; hot electrons in quantum wires and dots; hot electron tunneling and transport in superlattices; and novel devices based on hot electron transport.
Download or read book Hot Electrons in Semiconductors written by and published by . This book was released on 1978 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook for III V High Electron Mobility Transistor Technologies written by D. Nirmal and published by CRC Press. This book was released on 2019-05-14 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focusses on III-V high electron mobility transistors (HEMTs) including basic physics, material used, fabrications details, modeling, simulation, and other important aspects. It initiates by describing principle of operation, material systems and material technologies followed by description of the structure, I-V characteristics, modeling of DC and RF parameters of AlGaN/GaN HEMTs. The book also provides information about source/drain engineering, gate engineering and channel engineering techniques used to improve the DC-RF and breakdown performance of HEMTs. Finally, the book also highlights the importance of metal oxide semiconductor high electron mobility transistors (MOS-HEMT). Key Features Combines III-As/P/N HEMTs with reliability and current status in single volume Includes AC/DC modelling and (sub)millimeter wave devices with reliability analysis Covers all theoretical and experimental aspects of HEMTs Discusses AlGaN/GaN transistors Presents DC, RF and breakdown characteristics of HEMTs on various material systems using graphs and plots
Download or read book Junctionless Field Effect Transistors written by Shubham Sahay and published by John Wiley & Sons. This book was released on 2019-01-25 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive one-volume reference on current JLFET methods, techniques, and research Advancements in transistor technology have driven the modern smart-device revolution—many cell phones, watches, home appliances, and numerous other devices of everyday usage now surpass the performance of the room-filling supercomputers of the past. Electronic devices are continuing to become more mobile, powerful, and versatile in this era of internet-of-things (IoT) due in large part to the scaling of metal-oxide semiconductor field-effect transistors (MOSFETs). Incessant scaling of the conventional MOSFETs to cater to consumer needs without incurring performance degradation requires costly and complex fabrication process owing to the presence of metallurgical junctions. Unlike conventional MOSFETs, junctionless field-effect transistors (JLFETs) contain no metallurgical junctions, so they are simpler to process and less costly to manufacture.JLFETs utilize a gated semiconductor film to control its resistance and the current flowing through it. Junctionless Field-Effect Transistors: Design, Modeling, and Simulation is an inclusive, one-stop referenceon the study and research on JLFETs This timely book covers the fundamental physics underlying JLFET operation, emerging architectures, modeling and simulation methods, comparative analyses of JLFET performance metrics, and several other interesting facts related to JLFETs. A calibrated simulation framework, including guidance on SentaurusTCAD software, enables researchers to investigate JLFETs, develop new architectures, and improve performance. This valuable resource: Addresses the design and architecture challenges faced by JLFET as a replacement for MOSFET Examines various approaches for analytical and compact modeling of JLFETs in circuit design and simulation Explains how to use Technology Computer-Aided Design software (TCAD) to produce numerical simulations of JLFETs Suggests research directions and potential applications of JLFETs Junctionless Field-Effect Transistors: Design, Modeling, and Simulation is an essential resource for CMOS device design researchers and advanced students in the field of physics and semiconductor devices.
Download or read book Field Effect and Bipolar Power Transistor Physics written by Adolph Blicher and published by Elsevier. This book was released on 2012-12-02 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field-Effect and Bipolar Power Transistor Physics introduces the physics of operation of power transistors. It deals with bipolar devices as well as field-effect power transistors. The book provides an up-to-date account of the progress made in power transistor design. This volume consists of three parts. Part I examines general considerations and reviews semiconductor surface theory as a background to understanding surface phenomena. It also discusses the effect of high carrier concentration on the semiconductor properties. Part II deals with bipolar transistors and the basic structures of power transistors. Part III discusses junction field-effect and surface field-effect transistors. This book is written for electrical engineers who design power transistor circuits, device physicists and designers, and university students. The reader should have some familiarity with small signal transistor physics as the presentation is at the senior undergraduate or first-year graduate level.
Download or read book Hot Carrier Effects in MOS Devices written by Eiji Takeda and published by Elsevier. This book was released on 1995-11-28 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: The exploding number of uses for ultrafast, ultrasmall integrated circuits has increased the importance of hot-carrier effects in manufacturing as well as for other technological applications. They are rapidly movingout of the research lab and into the real world. This book is derived from Dr. Takedas book in Japanese, Hot-Carrier Effects, (published in 1987 by Nikkei Business Publishers). However, the new book is much more than a translation. Takedas original work was a starting point for developing this much more complete and fundamental text on this increasingly important topic. The new work encompasses not only all the latest research and discoveries made in the fast-paced area of hot carriers, but also includes the basics of MOS devices, and the practical considerations related to hot carriers. - Chapter one itself is a comprehensive review of MOS device physics which allows a reader with little background in MOS devices to pick up a sufficient amount of information to be able to follow the rest of the book - The book is written to allow the reader to learn about MOS Device Reliability in a relatively short amount of time, making the texts detailed treatment of hot-carrier effects especially useful and instructive to both researchers and others with varyingamounts of experience in the field - The logical organization of the book begins by discussing known principles, then progresses to empirical information and, finally, to practical solutions - Provides the most complete review of device degradation mechanisms as well as drain engineering methods - Contains the most extensive reference list on the subject
Download or read book Selected Works of Professor Herbert Kroemer written by Herbert Kroemer and published by World Scientific. This book was released on 2008 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information technology has changed our society radically. Just as the integrated circuits have been the prime mover for electronics, high-speed transistors and semiconductor lasers based on heterostructures are now playing the same role in modern telecommunications. Professor Kroemer's conceptual work on heterostructures began in the early 1950s as he was looking for a way to improve transistor speed and performance. In the 1960s, he applied the same principles to the development of lasers and light-emitting diodes, showing that they could achieve continuous operation at room temperature ? something thought impossible at that time. His deep fundamental scientific work has had a profound effect on technology and society, transforming and improving our lives.This reprint collection brings together Professor Kroemer's most important papers, presenting a comprehensive perspective of the field. It covers topics ranging from substrate materials, electronic properties, process technology, and devices, to circuits and applications. This reprint collection will help the reader identify the key stages in the development of heterostructure devices and lasers from early research through to its integration in current manufacturing. Devoted to R&D engineers and scientists who are actively involved in extending the nano- and microelectronics roadmap mainly via heterostructure engineering, this volume may also serve as a reference for postgraduate and research students.
Download or read book Research in Progress written by and published by . This book was released on 1975 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Device Physics Modeling Technology and Analysis for Silicon MESFET written by Iraj Sadegh Amiri and published by Springer. This book was released on 2018-12-13 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides detailed and accurate information on the history, structure, operation, benefits and advanced structures of silicon MESFET, along with modeling and analysis of the device. The authors explain the detailed physics that are important in modeling of SOI-MESFETs, and present the derivations of compact model expressions so that users can recognize the physical meaning of the model equations and parameters. The discussion also includes advanced structures for SOI-MESFET for submicron applications.
Download or read book Nitride Semiconductor Technology written by Fabrizio Roccaforte and published by John Wiley & Sons. This book was released on 2020-07-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book "Nitride Semiconductor Technology" provides an overview of nitride semiconductors and their uses in optoelectronics and power electronics devices. It explains the physical properties of those materials as well as their growth methods. Their applications in high electron mobility transistors, vertical power devices, LEDs, laser diodes, and vertical-cavity surface-emitting lasers are discussed in detail. The book further examines reliability issues in these materials and puts forward perspectives of integrating them with 2D materials for novel high-frequency and high-power devices. In summary, it covers nitride semiconductor technology from materials to devices and provides the basis for further research.
Download or read book Microwave Noise in Semiconductor Devices written by Hans Hartnagel and published by John Wiley & Sons. This book was released on 2001-01-16 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough reference work bridging the gap between contemporary and traditional approaches to noise problems Noise in semiconductor devices refers to any unwanted signal or disturbance in the device that degrades performance. In semiconductor devices, noise is attributed to hot-electron effects. Current advances in information technology have led to the development of ultrafast devices that are required to provide low-noise, high-speed performance. Microwave Noise in Semiconductor Devices considers available data on the speed versus noise trade-off and discusses optimal solutions in semiconductors and semiconductor structures. These solutions are of direct interest in the research and development for fast, efficient, and reliable communications systems. As the only book of its kind accessible to practicing engineers, the material is divided into four parts-the kinetic theory of fluctuations and its corollaries, the methods of measurements of microwave noise, low-dimensional structures, and, finally, devices. With over 100 illustrations presenting recent experimental data for up-to-date semiconductor structures designed for ultrafast electronics, together with results of microscopic simulation where available, these examples, tables, and references offer a full comprehension of electronic processes and fluctuation in dimensionally quantizing structures. Bridging the apparent gap between the microscopic approach and the equivalent circuit approach, Microwave Noise in Semiconductor Devices considers microwave fluctuation phenomena and noise in terms of ultrafast kinetic processes specific to modern quantum-well structures. Scientists in materials science, semiconductor and solid-state physics, electronic engineers, and graduate students will all appreciate this indispensable review of contemporary and future microwave and high-speed electronics.
Download or read book Device Electronics for Integrated Circuits written by Richard S. Muller and published by John Wiley & Sons. This book was released on 2002-10-28 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing specifically on silicon devices, the Third Edition of Device Electronics for Integrated Circuits takes students in integrated-circuits courses from fundamental physics to detailed device operation. Because the book focuses primarily on silicon devices, each topic can include more depth, and extensive worked examples and practice problems ensure that students understand the details.
Download or read book GaAs Devices and Circuits written by Michael S. Shur and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: GaAs devices and integrated circuits have emerged as leading contenders for ultra-high-speed applications. This book is intended to be a reference for a rapidly growing GaAs community of researchers and graduate students. It was written over several years and parts of it were used for courses on GaAs devices and integrated circuits and on heterojunction GaAs devices developed and taught at the University of Minnesota. Many people helped me in writing this book. I would like to express my deep gratitude to Professor Lester Eastman of Cornell University, whose ideas and thoughts inspired me and helped to determine the direction of my research work for many years. I also benefited from numerous discussions with his students and associates and from the very atmosphere of the pursuit of excellence which exists in his group. I would like to thank my former and present co-workers and colleagues-Drs. Levinstein and Gelmont of the A. F. Ioffe Institute of Physics and Technology, Professor Melvin Shaw of Wayne State University, Dr. Kastalsky of Bell Communi cations, Professor Gary Robinson of Colorado State University, Professor Tony Valois, and Dr. Tim Drummond of Sandia Labs-for their contributions to our joint research and for valuable discussions. My special thanks to Professor Morko.;, for his help, his ideas, and the example set by his pioneering work. Since 1978 I have been working with engineers from Honeywell, Inc.-Drs.
Download or read book Graphene written by Farzad Ebrahimi and published by BoD – Books on Demand. This book was released on 2015-11-25 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a result of contributions of experts from the international scientific community working in different aspects of graphene science and applications and reports on the state-of-the-art research and development findings on graphene through original and innovative research studies. Through its seven chapters, the reader will have access to works related to the theory and characterization of various planar heterostructures and nanoplatforms based on graphene and also the Compton effect in graphene, while it introduces photoactive graphene from functionalization to applications and also the modeling and control of a smart single-layer graphene sheet. Besides, it presents reviews on the modeling, synthesis, and properties of graphene and graphene technology and its applications in electronic devices.
Download or read book Compound Semiconductors 1998 written by H Sakaki and published by CRC Press. This book was released on 2021-02-01 with total page 931 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compound Semiconductors 1998 explores research and development in key semiconductor materials and III-V compounds such as gallium arsenide, indium phosphide, gallium nitride, silicon germanium, and silicon carbide. It critically assesses progress in key technologies such as reliability assessment and reports on advances in the use of semiconductors in modern electronic and optoelectronic devices. Coverage in this volume reflects the increased interest and research funding in nitride-based materials; wide band-gap devices; mobile communications, including III-V-based transistors and photonic devices; crystal growth and characterization; and nanoscale phenomena, such as quantum wires, dots, and other low dimensional structures.
Download or read book Handbook of Semiconductors written by Ram K. Gupta and published by CRC Press. This book was released on 2024-07-10 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with state-of-the-art knowledge of established and emerging semiconducting materials, their processing, and the fabrication of chips and microprocessors. In addition to covering the fundamentals of these materials, it details the basics and workings of many semiconducting devices and their role in modern electronics and explores emerging semiconductors and their importance in future devices. • Provides readers with latest advances in semiconductors. • Covers diodes, transistors, and other devices using semiconducting materials. • Covers advances and challenges in semiconductors and their technological applications. • Discusses fundamentals and characteristics of emerging semiconductors for chip manufacturing. This book provides directions to scientists, engineers, and researchers in materials engineering and related disciplines to help them better understand the physics, characteristics, and applications of modern semiconductors.
Download or read book Semiconductor Devices written by Amal Banerjee and published by Springer Nature. This book was released on 2023-10-16 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines in detail how a semiconductor device is designed and fabricated to satisfy best the requirements of the target application. The author presents and explains both basic and state-of-art semiconductor industry standards used in large/small signal equivalent circuit models for semiconductor devices that electronics engineers routinely use in their design calculations. The presentation includes detailed, step-by-step information on how a semiconductor device is fabricated, and the very sophisticated supporting technologies used in the process flow. The author also explains how standard laboratory equipment can be used to extract useful performance metrics of a semiconductor device.
