Download or read book Summer School on Flow and Transport in Porous Media written by Shutie Xiao and published by World Scientific. This book was released on 1992 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow and Transport in Porous Media.
Download or read book Mathematical Modeling for Flow and Transport Through Porous Media written by Gedeon Dagan and published by Springer Science & Business Media. This book was released on 1991 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a selection of articles presented at an International Workshop on `Mathematical Modeling for Flow and Transport Through Porous Media'. The major topics of the meeting were free and moving boundary problems, structured media, multiphase flow, scale problems, stochastic aspects, parameter identification and optimization problems. The volume also represents a few contributions on the incorporation of chemical and biological processes in mathematical models for transport in porous media. The book is directed at researchers active in porous media, mathematical modeling, petroleum and geotechnical engineering and environmental sciences.
Download or read book Recent Advances in Problems of Flow and Transport in Porous Media written by J.M. Crolet and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Porous media, and especially phenomena of transport in such materials, are an impor1ant field of interest for geologists, hydrogeologists, researchers in soil and fluid mechanics, petroleum and chemical engineers, physicists and scientists in many other disciplines. The development of better numerical simulation techniques in combination with the enormous expansion of computer tools, have enabled numerical simulation of transport phenomena (mass of phases and components, energy etc. ) in porous domains of interest. Before any practical application of the results of such simulations can be used, it is essential that the simulation models have been proven to be valid. In order to establish the greatest possible coherence between the models and the physical reality, frequent interaction between numericians, mathematicians and the previously quoted researchers, is necessary. Once this coherence is established, the numerical simulations could be used to predict various phenomena such as water management, propagation of pollutants etc. These simulations could be, in many cases, the only financially acceptable tool to carry out an investigation. Current studies within various fields of applications include not only physical comprehension aspects of flow and energy or solute transport in saturated or unsaturated media but also numerical aspects in deriving strong complex equations. Among the various fields of applications generally two types of problems can be observed. Those associated with the pollution of the environment and those linked to water management. The former are essentially a problem in industrialized countries, the latter are a major source of concern in North-Africa.
Download or read book Transverse Dispersion in Liquid Flow Through Porous Media written by Eugene Sidney Simpson and published by . This book was released on 1962 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Poromechanics II written by J.L. Auriault and published by CRC Press. This book was released on 2020-12-17 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings deal with the fundamentals and applications of poromechanics to geomechanics, material sciences, geophysics, acoustics and biomechanics. They discuss the state of the art in such topics as constitutive modelling and upscaling methods.
Download or read book Macroscale Models of Flow Through Highly Heterogeneous Porous Media written by M. Panfilov and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The The book book was was planned planned in in such such a a manner manner that that two two basic basic goals goals would would be be reached. reached. On On the the one one hand, hand, the the goal goal was was to to show show some some new new results results in in the the field field of of modeling modeling transport transport through through highly highly heterogeneous heterogeneous media, media, based based on on the the homogenization homogenization theory. theory. Multiple Multiple new new mathematical mathematical models models of of transport transport are are presented presented herein, herein, studying studying their their properties, properties, developing developing methods methods to to compute compute effective effective parameters parameters of of the the averaged averaged media, media, simulation simulation of of cell cell problems, problems, using using new new models models to to simulate simulate some some practical practical problems. problems. High High heterogeneity heterogeneity being being subjected subjected to to the the homogenization homogenization procedure, procedure, generates generates non-local non-local phenomena phenomena and and then then gives gives a a possibility possibility to to develop develop a a new, new, non-local non-local (or (or "dynamic"), "dynamic"), theory theory of of transport transport in in porous porous media. media.
Download or read book Homogenization and Porous Media written by Ulrich Hornung and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a systematic, rigorous treatment of upscaling procedures related to physical modeling for porous media on micro-, meso- and macro-scales, including detailed studies of micro-structure systems and computational results for dual-porosity models.
Download or read book Mathematical Modeling for Flow and Transport Through Porous Media written by Gedeon Dagan and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main aim of this paper is to present some new and general results, ap plicable to the the equations of two phase flow, as formulated in geothermal reservoir engineering. Two phase regions are important in many geothermal reservoirs, especially at depths of order several hundred metres, where ris ing, essentially isothermal single phase liquid first begins to boil. The fluid then continues to rise, with its temperature and pressure closely following the saturation (boiling) curve appropriate to the fluid composition. Perhaps the two most interesting theoretical aspects of the (idealised) two phase flow equations in geothermal reservoir engineering are that firstly, only one component (water) is involved; and secondly, that the densities of the two phases are so different. This has led to the approximation of ignoring capillary pressure. The main aim of this paper is to analyse some of the consequences of this assumption, especially in relation to saturation changes within a uniform porous medium. A general analytic treatment of three dimensional flow is considered. Pre viously, three dimensional modelling in geothermal reservoirs have relied on numerical simulators. In contrast, most of the past analytic work has been restricted to one dimensional examples.
Download or read book Transport Phenomena in Porous Media III written by Derek B Ingham and published by Elsevier. This book was released on 2005-07-29 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid and flow problems in porous media have attracted the attention of industrialists, engineers and scientists from varying disciplines, such as chemical, environmental, and mechanical engineering, geothermal physics and food science. There has been a increasing interest in heat and fluid flows through porous media, making this book a timely and appropriate resource.Each chapter is systematically detailed to be easily grasped by a research worker with basic knowledge of fluid mechanics, heat transfer and computational and experimental methods. At the same time, the readers will be informed of the most recent research literature in the field, giving it dual usage as both a post-grad text book and professional reference.Written by the recent directors of the NATO Advanced Study Institute session on 'Emerging Technologies and Techniques in Porous Media' (June 2003), this book is a timely and essential reference for scientists and engineers within a variety of fields.
Download or read book Modelling Water Flow in Unsaturated Porous Media written by Adam Szymkiewicz and published by Springer Science & Business Media. This book was released on 2012-10-11 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on two issues related to mathematical and numerical modelling of flow in unsaturated porous media. In the first part numerical solution of the governing equations is discussed, with particular emphasis on the spatial discretization of highly nonlinear permeability coefficient. The second part deals with large scale flow in heterogeneous porous media of binary structure. Upscaled models are developed and it is shown that the presence of material heterogeneities may give rise to additional non-equilibrium terms in the governing equations or to hysteresis in the averaged constitutive relationships.
Download or read book Quantum Transport written by Grégoire Allaire and published by Springer. This book was released on 2008-07-03 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this volume, a result of The CIME Summer School held in Cetraro, Italy, in 2006, four leading specialists present different aspects of quantum transport modeling. It provides an excellent basis for researchers in this field.
Download or read book Mathematical Models and Finite Elements for Reservoir Simulation written by G. Chavent and published by Elsevier. This book was released on 1986-01-01 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical simulators for oil reservoirs have been developed over the last twenty years and are now widely used by oil companies. The research, however, has taken place largely within the industry itself, and has remained somewhat inaccessible to the scientific community. This book hopes to remedy the situation by means of its synthesized presentation of the models used in reservoir simulation, in a form understandable to both mathematicians and engineers.The book aims to initiate a rigorous mathematical study of the immiscible flow models, partly by using the novel `global pressure' approach in treating incompressible two-phase problems. A finite element approximation technique based on the global pressure variational model is presented, and new approaches to the modelling of various kinds of multiphase flow through porous media are introduced.Much of the material is highly original, and has not been presented elsewhere. The mathematical and numerical models should be of great interest to applied mathematicians, and to engineers seeking an alternative approach to reservoir modelling.
Download or read book Submicron Porous Materials written by Paolo Bettotti and published by Springer. This book was released on 2017-02-21 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the latest research on porous materials at the submicron scale and inspires readers to better understand the porosity of materials, as well as to develop innovative new materials. A comprehensive range of materials are covered, including carbon-based and organic-based porous materials, porous anodic alumina, silica, and titania-based sol-gel materials. The fabrication, characterization, and applications of these materials are all explored, with applications ranging from sensors, thermoelectrics, catalysis, energy storage, to photovoltaics. Also of practical use for readers are chapters that describe the basics of porous silicon fabrication and its use in optical sensing and drug delivery applications; how thermal transport is affected in porous materials; how to model diffusion in porous materials; and a unique chapter on an innovative spectroscopic technique used to characterize materials' porosity. This is an ideal book for graduate students, researchers, and professionals who work with porous materials.
Download or read book Homogenization Methods For Multiscale Mechanics written by Chiang C Mei and published by World Scientific. This book was released on 2010-09-23 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many physical problems several scales are present in space or time, caused by inhomogeneity of the medium or complexity of the mechanical process. A fundamental approach is to first construct micro-scale models, and then deduce the macro-scale laws and the constitutive relations by properly averaging over the micro-scale. The perturbation method of multiple scales can be used to derive averaged equations for a much larger scale from considerations of the small scales. In the mechanics of multiscale media, the analytical scheme of upscaling is known as the Theory of Homogenization.The authors share the view that the general methods of homogenization should be more widely understood and practiced by applied scientists and engineers. Hence this book is aimed at providing a less abstract treatment of the theory of homogenization for treating inhomogeneous media, and at illustrating its broad range of applications. Each chapter deals with a different class of physical problems. To tackle a new problem, the approach of first discussing the physically relevant scales, then identifying the small parameters and their roles in the normalized governing equations is adopted. The details of asymptotic analysis are only explained afterwards.
Download or read book Multi scale Phenomena in Complex Fluids written by Thomas Y. Hou and published by World Scientific. This book was released on 2009 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-Scale Phenomena in Complex Fluids is a collection of lecture notes delivered during the ªrst two series of mini-courses from "Shanghai Summer School on Analysis and Numerics in Modern Sciences," which was held in 2004 and 2006 at Fudan University, Shanghai, China. This review volume of 5 chapters, covering various fields in complex fluids, places emphasis on multi-scale modeling, analyses and simulations. It will be of special interest to researchers and graduate students who want to work in the field of complex fluids.
Download or read book Multi scale Phenomena In Complex Fluids Modeling Analysis And Numerical Simulations written by Chun Liu and published by World Scientific. This book was released on 2009-06-12 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-Scale Phenomena in Complex Fluids is a collection of lecture notes delivered during the first two series of mini-courses from “Shanghai Summer School on Analysis and Numerics in Modern Sciences”, which was held in 2004 and 2006 at Fudan University, Shanghai, China.This review volume of 5 chapters, covering various fields in complex fluids, places emphasis on multi-scale modeling, analyses and simulations. It will be of special interest to researchers and graduate students who want to work in the field of complex fluids.
Download or read book Progress in Industrial Mathematics at ECMI 2000 written by Angelo M. Anile and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: Realizing the need of interaction between universities and research groups in industry, the European Consortium for Mathematics in Industry (ECMI) was founded in 1986 by mathematicians from ten European universities. Since then it has been continuously extending and now it involves about all Euro pean countries. The aims of ECMI are • To promote the use of mathematical models in industry. • To educate industrial mathematicians to meet the growing demand for such experts. • To operate on a European Scale. Mathematics, as the language of the sciences, has always played an im portant role in technology, and now is applied also to a variety of problems in commerce and the environment. European industry is increasingly becoming dependent on high technology and the need for mathematical expertise in both research and development can only grow. These new demands on mathematics have stimulated academic interest in Industrial Mathematics and many mathematical groups world-wide are committed to interaction with industry as part of their research activities. ECMI was founded with the intention of offering its collective knowledge and expertise to European Industry. The experience of ECMI members is that similar technical problems are encountered by different companies in different countries. It is also true that the same mathematical expertise may often be used in differing industrial applications.
