Download or read book High Voltage Test and Measuring Techniques written by Wolfgang Hauschild and published by Springer. This book was released on 2018-09-22 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of this book incorporates the recent remarkable changes in electric power generation, transmission and distribution. The consequences of the latest development to High Voltage (HV) test and measuring techniques result in new chapters on Partial Discharge measurements, Measurements of Dielectric Properties, and some new thoughts on the Shannon Theorem and Impuls current measurements. This standard reference of the international high-voltage community combines high voltage engineering with HV testing techniques and HV measuring methods. Based on long-term experience gained by the authors the book reflects the state of the art as well as the future trends in testing and diagnostics of HV equipment. It ensures a reliable generation, transmission and distribution of electrical energy. The book is intended not only for experts but also for students in electrical engineering and high-voltage engineering.

Download or read book High Voltage Measurement Techniques written by Klaus Schon and published by Springer. This book was released on 2019-07-04 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book conveys the theoretical and experimental basics of a well-founded measurement technique in the areas of high DC, AC and surge voltages as well as the corresponding high currents. Additional chapters explain the acquisition of partial discharges and the electrical measured variables. Equipment exposed to very high voltages and currents is used for the transmission and distribution of electrical energy. They are therefore tested for reliability before commissioning using standardized and future test and measurement procedures. Therefore, the book also covers procedures for calibrating measurement systems and determining measurement uncertainties, and the current state of measurement technology with electro-optical and magneto-optical sensors is discussed.

Download or read book Condition Assessment of High Voltage Insulation in Power System Equipment written by R.E. James and published by IET. This book was released on 2008 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers major components of a high voltage system and the different insulating materials applied in equipment, identifying measurable materials suitable for condition assessment, and also analyses insulation fault scenarios that may occur in power equipment.

Download or read book Springer Handbook of Power Systems written by Konstantin O. Papailiou and published by Springer Nature. This book was released on 2021-04-12 with total page 1283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook offers a comprehensive source for electrical power professionals. It covers all elementary topics related to the design, development, operation and management of power systems, and provides an insight from worldwide key players in the electrical power systems industry. Edited by a renowned leader and expert in Power Systems, the book highlights international professionals’ longstanding experiences and addresses the requirements of practitioners but also of newcomers in this field in finding a solution for their problems. The structure of the book follows the physical structure of the power system from the fundamentals through components and equipment to the overall system. In addition the handbook covers certain horizontal matters, for example "Energy fundamentals", "High voltage engineering", and "High current and contact technology" and thus intends to become the major one-stop reference for all issues related to the electrical power system.

Download or read book Modern Applications in Optics and Photonics written by Lourdes S. M. Alwis and published by MDPI. This book was released on 2021-09-02 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optics and photonics are among the key technologies of the 21st century, and offer potential for novel applications in areas such as sensing and spectroscopy, analytics, monitoring, biomedical imaging/diagnostics, and optical communication technology. The high degree of control over light fields, together with the capabilities of modern processing and integration technology, enables new optical measurement systems with enhanced functionality and sensitivity. They are attractive for a range of applications that were previously inaccessible. This Special Issue aims to provide an overview of some of the most advanced application areas in optics and photonics and indicate the broad potential for the future.

Download or read book Water and Energy International written by and published by . This book was released on 2016 with total page 1020 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Current Trends in Engineering Practice written by C. V. Ramakrishnan and published by Alpha Science Int'l Ltd.. This book was released on 2006 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Current Trends in Engineering Practice' covers topics such as geotechnical investigations and structures, construction of earthmoving equipment, power system methodologies, inertial systems, launch vehicle design and corporate turnaround.

Download or read book High Impulse Voltage and Current Measurement Techniques written by Klaus Schon and published by Springer Science & Business Media. This book was released on 2013-07-03 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Equipment to be installed in electric power-transmission and distribution systems must pass acceptance tests with standardized high-voltage or high-current test impulses which simulate the stress on the insulation caused by external lightning discharges and switching operations in the grid. High impulse voltages and currents are also used in many other fields of science and engineering for various applications. Therefore, precise impulse-measurement techniques are necessary, either to prevent an over- or understressing of the insulation or to guarantee the effectiveness and quality of the application. The target audience primarily comprises engineers and technicians but the book may also be beneficial for graduate students of high-voltage engineering and electrical power supply systems.

Download or read book Non destructive Diagnostic of High Voltage Electrical Systems written by Josef Vedral and published by CRC Press. This book was released on 2023-05-05 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the methods of signal processing used in the non-destructive diagnostics of mechanical and electrical properties of high-voltage electrical machines. Traditional and less traditional methods are given, which allow measuring the mechanical and electrical properties of these machines in order to determine their technical condition, including a description of their measurement methods. Separate chapters are devoted to the causes and methods of measuring and evaluating partial discharges arising in the insulation systems of high-voltage electrical machines. The following chapters provide an overview of the test methods used in the non-disassembly diagnostics of high-voltage transformers, rotary machines, high-voltage cables, insulators, surge arresters and circuit breakers. The book is intended for students of technical universities and experts in the field of non- destructive diagnostics of high-voltage electrical machines. The book was reviewed by Ing. Jiří Brázdil, Ph.D. MBA, Head of the HV laboratory of ORGREZ in the Czech Republic.

Download or read book Transmission and Distribution Electrical Engineering written by Colin Bayliss and published by Elsevier. This book was released on 2006-12-18 with total page 1039 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dramatic power outages in North America, and the threat of a similar crisis in Europe, have made the planning and maintenance of the electrical power grid a newsworthy topic.Most books on transmission and distribution electrical engineering are student texts that focus on theory, brief overviews, or specialized monographs. Colin Bayliss and Brian Hardy have produced a unique and comprehensive handbook aimed squarely at the engineers and planners involved in all aspects of getting electricity from the power plant to the user via the power grid. The resulting book is an essential read, and a hard-working reference for all engineers, technicians, managers and planners involved in electricity utilities, and related areas such as generation, and industrial electricity usage.* An essential read and hard*working ref

Download or read book Gas Insulated Substations written by Hermann J. Koch and published by John Wiley & Sons. This book was released on 2014-06-06 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive reference covering all aspects of gas insulated substations including basic principles, technology, use & application, design, specification, testing and ownership issues This book provides an overview on the particular development steps of gas insulated high-voltage switchgear, and is based on the information given with the editor’s tutorial. The theory is kept low only as much as it is needed to understand gas insulated technology, with the main focus of the book being on delivering practical application knowledge. It discusses some introductory and advanced aspects in the meaning of applications. The start of the book presents the theory of Gas Insulated Technology, and outlines reliability, design, safety, grounding and bonding, and factors for choosing GIS. The third chapter presents the technology, covering the following in detail: manufacturing, specification, instrument transformers, Gas Insulated Bus, and the assembly process. Next, the book goes into control and monitoring, which covers local control cabinet, bay controller, control schemes, and digital communication. Testing is explained in the middle of the book before installation and energization. Importantly, operation and maintenance is discussed. This chapter includes information on repair, extensions, retrofit or upgrade, and overloading. Finally applications are covered along with concepts of layout, typical layouts, mixed technology substations, and then other topics such as life cycle assessment, environmental impact, and project management. A one-stop, complete reference text on gas insulated substations (GIS), large-capacity and long-distance electricity transmission, which are of increasing importance in the power industry today Details advanced and basic material, accessible for both existing GIS users and those planning to adopt the technology Discusses both the practical and theoretical aspects of GIS Written by acknowledged GIS experts who have been involved in the development of the technology from the start

Download or read book Physical Test Methods for Elastomers written by Roger Brown and published by Springer. This book was released on 2017-10-18 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive coverage of all aspects of physical testing of elastomers (rubbers and thermoplastic elastomers) including mechanical, electrical, thermal and all aspects of durability. Elastomers are an important class of materials used in such products as tyres, seals and hose which have markedly different properties to other materials. The importance of testing of elastomers means that a comprehensive text on the subject is essential. The advantage over general materials testing books is being more specific while the advantage over general rubber technology books is that testing is dealt with in depth.

Download or read book Experiments in High Voltage Engineering written by and published by KSUP. This book was released on with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book GB 16916 1 2014 Translated English of Chinese Standard GB16916 1 2014 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-03-06 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part of GB 16916 specifies the terms and definitions, technical requirements and tests of various types of RCCB. This part is applicable to the residual current operated circuit-breakers without integral overcurrent protection for household and similar uses for which the AC rated frequency is 50 Hz, 60 Hz or 50/60 Hz, the rated voltage does not exceed 440 V, the rated current does not exceed 125 A, AND the action function is independent of the power supply voltage or dependent of the power supply voltage (hereinafter referred to as RCCB).

Download or read book Power System Transients written by Juan A. Martinez-Velasco and published by CRC Press. This book was released on 2017-12-19 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the powerful numerical techniques and graphical user interfaces available in present software tools for power system transients, a lack of reliable tests and conversion procedures generally makes determination of parameters the most challenging part of creating a model. Illustrates Parameter Determination for Real-World Applications Geared toward both students and professionals with at least some basic knowledge of electromagnetic transient analysis, Power System Transients: Parameter Determination summarizes current procedures and techniques for the determination of transient parameters for six basic power components: overhead line, insulated cable, transformer, synchronous machine, surge arrester, and circuit breaker. An expansion on papers published in the IEEE Transactions on Power Delivery, this text helps those using transient simulation tools (e.g., EMTP-like tools) to select the optimal determination method for their particular model, and it addresses commonly encountered problems, including: Lack of information Testing setups and measurements that are not recognized in international standards Insufficient studies to validate models, mainly those used in high-frequency transients Current built-in models that do not cover all requirements Illustrated with case studies, this book provides modeling guidelines for the selection of adequate representations for main components. It discusses how to collect the information needed to obtain model parameters and also reviews procedures for deriving them. Appendices summarize updated techniques for identifying linear systems from frequency responses and review capabilities and limitations of simulation tools. Emphasizing standards, this book is a clear and concise presentation of key aspects in creating an adequate and reliable transient model.

Download or read book Transient Analysis of Power Systems written by Juan A. Martinez-Velasco and published by John Wiley & Sons. This book was released on 2020-02-10 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: A hands-on introduction to advanced applications of power system transients with practical examples Transient Analysis of Power Systems: A Practical Approach offers an authoritative guide to the traditional capabilities and the new software and hardware approaches that can be used to carry out transient studies and make possible new and more complex research. The book explores a wide range of topics from an introduction to the subject to a review of the many advanced applications, involving the creation of custom-made models and tools and the application of multicore environments for advanced studies. The authors cover the general aspects of the transient analysis such as modelling guidelines, solution techniques and capabilities of a transient tool. The book also explores the usual application of a transient tool including over-voltages, power quality studies and simulation of power electronics devices. In addition, it contains an introduction to the transient analysis using the ATP. All the studies are supported by practical examples and simulation results. This important book: Summarises modelling guidelines and solution techniques used in transient analysis of power systems Provides a collection of practical examples with a detailed introduction and a discussion of results Includes a collection of case studies that illustrate how a simulation tool can be used for building environments that can be applied to both analysis and design of power systems Offers guidelines for building custom-made models and libraries of modules, supported by some practical examples Facilitates application of a transients tool to fields hardly covered with other time-domain simulation tools Includes a companion website with data (input) files of examples presented, case studies and power point presentations used to support cases studies Written for EMTP users, electrical engineers, Transient Analysis of Power Systems is a hands-on and practical guide to advanced applications of power system transients that includes a range of practical examples.

Download or read book GB 11032 2010 English Translation of Chinese Standard written by https://www.codeofchina.com and published by https://www.codeofchina.com. This book was released on with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard applies to metal-oxide surge arrester without gaps (hereinafter referred to as "arrester") designed to limit overvoltage on AC power system.