Download or read book High Temperature Metallography written by M. G. Lozinskii and published by Elsevier. This book was released on 2013-09-11 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Metallography focuses on the reactions, processes, methodologies, and approaches involved in high temperature metallography. The publication first offers information on the basic principles of high temperature vacuum metallography, including the methods of heating test specimens in vacuo to high temperatures; specimens for investigating structure and properties of metals by heating in vacuo; and methods of regulating and controlling the temperature of specimens heated in vacuo. The text then ponders on vacuum systems in equipment for investigating the structure and properties of metals and alloys heated at low ultimate pressures, as well as gas flow through the tubes during evacuation; construction and characteristics of vacuum pumps used for high temperature metallography equipment; and approximate calculation of parameters of vacuum systems for equipment intended for investigating metals during heating in a vacuum. The book takes a look at equipment and instruments for investigating metals heated in a vacuum; method of investigation by studying microstructures and properties of metals and alloys while heated in vacuo; and methods for measuring elasticity, internal friction, and hardness, and for investigating the deformation of metals and alloys at high temperatures in vacuo. The text is a dependable reference for readers interested in high temperature metallography.
Download or read book High Temperature Materials and Mechanisms written by Yoseph Bar-Cohen and published by CRC Press. This book was released on 2014-03-03 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of high-temperature materials in current and future applications, including silicone materials for handling hot foods and metal alloys for developing high-speed aircraft and spacecraft systems, has generated a growing interest in high-temperature technologies. High Temperature Materials and Mechanisms explores a broad range of issues related to high-temperature materials and mechanisms that operate in harsh conditions. While some applications involve the use of materials at high temperatures, others require materials processed at high temperatures for use at room temperature. High-temperature materials must also be resistant to related causes of damage, such as oxidation and corrosion, which are accelerated with increased temperatures. This book examines high-temperature materials and mechanisms from many angles. It covers the topics of processes, materials characterization methods, and the nondestructive evaluation and health monitoring of high-temperature materials and structures. It describes the application of high temperature materials to actuators and sensors, sensor design challenges, as well as various high temperature materials and mechanisms applications and challenges. Utilizing the knowledge of experts in the field, the book considers the multidisciplinary nature of high temperature materials and mechanisms, and covers technology related to several areas including energy, space, aerospace, electronics, and metallurgy. Supplies extensive references at the end of each chapter to enhance further study Addresses related science and engineering disciplines Includes information on drills, actuators, sensors and more A comprehensive resource of information consolidated in one book, this text greatly benefits students in materials science, aerospace and mechanical engineering, and physics. It is also an ideal resource for professionals in the industry.
Download or read book High temperature High resolution Metallography written by American Institute of Mining, Metallurgical, and Petroleum Engineers. Metallurgical Society. Ferrous Metallurgical Committee. Symposium and published by . This book was released on 1967 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallography and Microstructure in Ancient and Historic Metals written by David A. Scott and published by Getty Publications. This book was released on 1992-01-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.
Download or read book Modern Metallography written by R. E. Smallman and published by Elsevier. This book was released on 2013-10-22 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Metallography focuses on the defects in the properties of metals, such as precipitates, cracks, grain boundaries, dislocations, stacking faults, and impurity atoms. The publication first offers information on reflected light microscopy and high temperature microscopy. Discussions focus on specimen preparation, defects of lenses, methods of increasing the resolving power of an objective, long working distance objectives, and typical hot-stage experiments. The text then elaborates on surface topography and polarizing microscope, including oblique illumination, interferometry, examination of anisotropic surfaces, and other uses of polarized light microscopy. The text takes a look at X-ray metallography and specialized X-ray diffraction techniques. Topics include Laue method and orientation, structure factor, powder method and the accurate measurement of lattice parameters, Bragg law, sheet textures, and preferred orientation. The publication further elaborates on electron microscopy and metallography at the atomic level. The manuscript is a valuable reference for students and readers interested in modern metallography.
Download or read book The Metallography and Heat Treatment of Iron and Steel written by Albert Sauveur and published by . This book was released on 1916 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High temperature High resolution Metallography written by Hubert I. Aaronson and published by . This book was released on 1967 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Metallography written by Lozinskii and published by . This book was released on 1969 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallography Principles and Practice written by George F. Vander Voort and published by ASM International. This book was released on 1999-01-01 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work offers a comprehensive source of information on metallographic techniques and their application to the study of metals, ceramics, and polymers. It contains an extensive collection of micro- and macrographs.
Download or read book The Metallography and Heat Treatment of Iron and Steel written by Albert Sauveur and published by Рипол Классик. This book was released on 1938 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallography written by Arthur Horseman Hiorns and published by . This book was released on 1902 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Metallography Translated by L Herdan written by Mikhail Grigor'evich LOZINSKY and published by . This book was released on 1961 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Corrosion and Materials Applications written by George Y. Lai and published by ASM International. This book was released on 2007-01-01 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: George Lai's 1990 book, High-Temperature Corrosion of Engineering Alloys, is recognized as authoritative and is frequently consulted and often cited by those in the industry. His new book, almost double in size with seven more chapters, addresses the new concerns, new technologies, and new materials available for those engaged in high-temperature applications. As we strive for energy efficiency, the realm of high-temperature environments is expanding and the need for information on high temperature materials applications was never greater. In addition to extensive expansion on most of the content of the original book, new topics include erosion and erosion-corrosion, low NOx combustion in coal-fired boilers, fluidized bed combustion, and the special demands of waste-to-energy boilers, waste incinerators, and black liquor recovery boilers in the pulp and paper industry. The corrosion induced by liquid metals is discussed and protection options are presented.
Download or read book Metallography of Steels Interpretation of Structure and the Effects of Processing written by Hubertus Colpaert and published by ASM International. This book was released on 2018-08-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and translated by André Luiz V. da Costa e Silva This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur. First published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil, this book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons. In the Fourth Edition and English translation, updated and translated by Professor André Luiz V. da Costa e Silva, the concept of the of the original edition was preserved while the important developments of recent decades, both in metallographic characterization and in steel and iron products, as well as progress in the understanding of the transformations that made the extraordinary developments of these alloys possible, were added. Most metallographs are of actual industrial materials and a large number originate from industry leaders or laboratories at the forefront of steel and iron development. As steel continues to be the most widely used metallic material in the world, Metallography of Steels continues to be an essential reference for students, metallographers, and engineers interested in understanding processing-properties-structure relationships of the material. The balance between theoretical and applied information makes this book a valuable companion for even experienced steel practitioners.
Download or read book Metallography The metals and common alloys written by Samuel Leslie Hoyt and published by . This book was released on 1921 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallographic Researches written by Carl Axel Fredrik Benedicks and published by . This book was released on 1926 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Directionally Solidified Materials for High Temperature Service written by Malcolm McLean and published by . This book was released on 1983 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
