Download or read book High Temperature Corrosion and Protection of Materials 7 written by Pierre Steinmetz and published by Trans Tech Publications Ltd. This book was released on 2008-09-09 with total page 1278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). This special volume addresses fundamental and practical aspects of high-temperature corrosion and protection. It stresses that devoting attention to an understanding of the corrosion problems encountered by contemporary industry, and providing opportunities for extended interaction, could lead to approaches for improving the performance of materials and protective measures.
Download or read book High Temperature Corrosion and Protection of Materials 7 written by and published by . This book was released on 2008 with total page 1278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special volume addresses fundamental and practical aspects of high-temperature corrosion and protection. It stresses that devoting attention to an understanding of the corrosion problems encountered by contemporary industry, and providing opportunities for extended interaction, could lead to approaches for improving the performance of materials and protective measures. The book is divided into the topics: I. Materials and Coatings for Gas Turbines, II. Power Boilers and Incinerators; H2 Syngas and Biofuel Production, III. HT Materials for Nuclear Processes, IV. HT Corrosion in the Processing Industries, V. HT Corrosion of Functional Materials and Coatings, VI. Fundamentals. The 131 papers covered all aspects of the development, testing and determination of mechanisms of the degradation of coatings. Continued efforts aimed at understanding the mechanisms of formation, growth and failure of protective scales (including approaches to modelling) were another major area of interest, and accounted for nearly a quarter of the papers. A further 20% of the papers are concerned with materials issues linked to current trends in power generation: specifically, oxidation in steam/water vapor, the effects of firing biomass, the use of oxy-fuel conditions, and materials issues associated with nuclear power generation. Overall, the ratio of papers addressing practical problems, to those concerned more with fundamental aspects, was approximately 2:1; which was a good reflection on the intent of the original plan.
Download or read book Selected Peer Reviewed Papers from 7th International Symposium on High Temperature Corrosion and Protection of Materials written by International Symposium on High Temperature Corrosion and Protection of Materials. 7, 2008 and published by . This book was released on 2008 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments in High Temperature Corrosion and Protection of Materials written by W Gao and published by Elsevier. This book was released on 2008-04-09 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature corrosion is a phenomenon that occurs in components that operate at very high temperatures, such as gas turbines, jet engines and industrial plants. Engineers are constantly striving to understand and prevent this type of corrosion. This book examines the latest developments in the understanding of high temperature corrosion processes and protective oxide scales and coatings. Part one looks at high temperature corrosion. Chapters cover diffusion and solid state reactions, external and internal oxidation of alloys, metal dusting corrosion, tribological degradation, hot corrosion, and oxide scales on hot-rolled steel strips. Modern techniques for analysing high temperature oxidation and corrosion are also discussed. Part two discusses methods of protection using ceramics, composites, protective oxide scales and coatings. Chapters focus on layered ternary ceramics, alumina scales, Ti-Al intermetallic compounds, metal matrix composites, chemical vapour deposited silicon carbide, nanocrystalline coatings and thermal barrier coatings. Part three provides case studies illustrating some of the challenges of high temperature corrosion to industry and how they can be overcome. Case studies include the petrochemical industry, modern incinerators and oxidation processing of electronic materials. This book is a valuable reference tool for engineers who develop heat resistant materials, mechanical engineers who design and maintain high temperature equipment and plant, and research scientists and students who study high temperature corrosion and protection of materials. Describes the latest developments in understanding high temperature corrosion Presents the latest research by the leading innovators from around the globe Case studies are provided to illustrate key points
Download or read book High Temperature Corrosion and Protection of Materials 7 written by International Symposium on High Temperature Corrosion and Protection of Materials and published by . This book was released on 2008 with total page 1179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS).This special volume addresses fundamental and practical aspects of high-temperature corrosion and protection. It stresses that devoting attention to an understanding of the corrosion problems encountered by contemporary industry, and providing opportunities for extended interaction, could lead to approaches for improving the performance of materials and protective measures. The book is divided into the topics: I. Materials and Coatings for Gas Turbines, II. Power Boilers and Incinerators; H2 Syngas and Biofuel Production, III. HT Materials for Nuclear Processes, IV. HT Corrosion in the Processing Industries, V. HT Corrosion of Functional Materials and Coatings, VI. Fundamentals.The 131 papers covered all aspects of the development, testing and determination of mechanisms of the degradation of coatings. Continued efforts aimed at understanding the mechanisms of formation, growth and failure of protective scales (including approaches to modelling) were another major area of interest, and accounted for nearly a quarter of the papers. A further 20% of the papers are concerned with materials issues linked to current trends in power generation: specifically, oxidation in steam/water vapor, the effects of firing biomass, the use of oxy-fuel conditions, and materials issues associated with nuclear power generation. Overall, the ratio of papers addressing practical problems, to those concerned more with fundamental aspects, was approximately 2:1; which was a good reflection on the intent of the original plan. Proceedings of an international symposium held in Les Embiez, France, in May 2008, addressing fundamental and practical aspects of high- temperature (HT) corrosion and protection of materials. The two-volume set features 131 contributions organized into six sections. The first, on materials and coatings for gas turbines, examines lifetime issues, modes of failure, oxidation and hot corrosion, and trends and developments. Articles in the second section-power boilers and incinerators, H2 singas and biofuels production-deal with advanced steam conditions, fireside corrosion, oxy-firing, use of alternative fuels, gasification, high-temperature electrolysis, and thermochemical processes. The third section, HT materials for nuclear processes, addresses various types of reactors-pressurized-water, European pressured, high-temperature, very high-temperature, and fusion-supercritical water-cooled processes, and molten metals and salts. The fourth, HT corrosion in the process industries, focuses on the steel industry, electrometallurgy, glass and ceramics production, refining, and the petrochemical and chemical industries. The fifth, HT corrosion of functional materials and coatings, examines materials for automotive applications, burners, filters, and fuel cells. The final section on fundamentals addresses various mechanisms and new techniques for measurement and characterization of corrosion.
Download or read book High Temperature Corrosion and Protection of Materials 7 written by Pierre Steinmetz and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Corrosion and Protection of Materials 7 written by Pierre Steinmetz and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Coatings written by Sudhangshu Bose and published by Butterworth-Heinemann. This book was released on 2017-11-27 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Coatings, Second Edition, demonstrates how to counteract the thermal effects of rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. With his long experience in the aerospace gas turbine industry, the author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. The book is supplemented with the latest reference information and additional support to help readers find more application- and industry-type coatings specifications and uses. Offers an overview of the underlying fundamental concepts of thermally-protective coatings, including thermodynamics, energy kinetics, crystallography and equilibrium phases Covers essential chemistry and physics of underlying substrates, including steels, nickel-iron alloys, nickel-cobalt alloys and titanium alloys Provides detailed guidance on a wide variety of coating types, including those used against high temperature corrosion and oxidative degradation and thermal barrier coatings
Download or read book High Temperature Corrosion and Materials Chemistry 7 written by E. Wuchina and published by The Electrochemical Society. This book was released on 2009-08 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers included in this issue of ECS Transactions were originally presented in the symposium ¿High Temperature Corrosion and Materials Chemistry 7¿, held during the PRiME 2008 joint international meeting of The Electrochemical Society and The Electrochemical Society of Japan, with the technical cosponsorship of the Japan Society of Applied Physics, the Korean Electrochemical Society, the Electrochemistry Division of the Royal Australian Chemical Institute, and the Chinese Society of Electrochemistry. This meeting was held in Honolulu, Hawaii, from October 12 to 17, 2008.
Download or read book High Temperature Corrosion and Protection of Materials 7 written by Pierre Steinmetz and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials and Coatings to Resist High Temperature Corrosion written by Derek Roy Holmes and published by . This book was released on 1978 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Corrosion and Protection of Materials 4 written by Roland Streiff and published by Trans Tech Publications Ltd. This book was released on 1997-10-27 with total page 1104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). The present book provides a timely update to the current understanding of degradation processes in high-temperature materials, as related to chemical interactions with the environment. The methods used to combat this degradation - particularly by means of protective coatings and surface treatments - are also analysed in detail.
Download or read book High Temperature Corrosion and Protection of Materials 6 written by Pierre Steinmetz and published by Trans Tech Publications Ltd. This book was released on 2004-08-15 with total page 1270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). The major concern of this book is high-temperature corrosion; a form of surface disintegration that leads to high running costs, as well as to environmental and/or security problems.
Download or read book High Temperature Corrosion and Protection of Materials 5 written by Roland Streiff and published by Trans Tech Publications Ltd. This book was released on 2001-10-12 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). The degradation of materials and coatings in aggressive environments continues to be of great relevance to a wide range of industrial applications. The topic is of vital economic concern to the transportation, energy generation, and chemical processing industries in the developing, as well as the developed, nations of the world. The dual thrusts of conservation of resources and protection of the environment here strongly influence the tone of the technical submissions and thus again reflect the world-wide concern.
Download or read book High Temperature Corrosion and Protection of Materials 6 written by Pierre Steinmetz and published by Trans Tech Publications. This book was released on 2004 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major concern of this book is high-temperature corrosion; a form of surface disintegration that leads to high running costs, as well as to environmental and/or security problems. The papers contained herein describe both fundamental, and more applied, aspects of the subject which are relevant to today's industrial systems, with the emphasis being placed on static or aviation gas turbines, as well as on power-generation technologies (coal or oil burning, coal gasification, nuclear power, fuel cells), incineration and the processing industries. Depending upon the specific topic, the reader will find many up-to-date theoretical treatments and mechanistic models of alloy degradation, as well as more practical means for measuring and characterizing in-service corrosion. This book will be an important source of data and ideas for researchers, lecturers and engineers; making it an efficient tool for solving high-temperature corrosion problems.
Download or read book Proceedings of the 5th International Symposium on High Temperature Corrosion and Protection of Materials written by International Symposium on High Temperature Corrosion and Protection of Materials and published by . This book was released on 2001 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Corrosion and Protection of Materials written by and published by . This book was released on 19?? with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
