Download or read book High Temperature Constitutive Modeling theory and Application written by American Society of Mechanical Engineers. Winter Annual Meeting and published by . This book was released on 1991 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Materials Behavior Models Three Volume Set written by Jean LeMaitre and published by Elsevier. This book was released on 2001-11-17 with total page 1231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first of a kind reference/handbook deals with nonlinear models and properties of material. In the study the behavior of materials' phenomena no unique laws exist. Therefore, researchers often turn to models to determine the properties of materials. This will be the first book to bring together such a comprehensive collection of these models. The Handbook deals with all solid materials, and is organized first by phenomena. Most of the materials models presented in an applications-oriented fashion, less descriptive and more practitioner-geared, making it useful in the daily working activities of professionals. The Handbook is divided into three volumes. Volume I, Deformation of Materials, introduces general methodologies in the art of modeling, in choosing materials, and in the "so-called" size effect. Chapters 2-5 deal respectively with elasticity and viscoelasticity, yield limit, plasticity, and visco-plasticity. Volume II, Failures in Materials, provides models on such concerns as continuous damage, cracking and fracture, and friction wear. Volume III, Multiphysics Behavior, deals with multiphysics coupled behaviors. Chapter's 10 and 11 are devoted to special classes of materials (composites, biomaterials, and geomaterials). The different sections within each chapter describe one model each with its domain of validity, its background, its formulation, the identification of material parameters for as many materials as possible, and advice on how to implement or use the model. The study of the behavior of materials, especially solids, is related to hundreds of areas in engineering design and control. Predicting how a material will perform under various conditions is essential to determining the optimal performance of machines and vehicles and the structural integrity of buildings, as well as safety issues. Such practical examples would be how various new materials, such as those used in new airplane hulls, react to heat or cold or sudden temperature changes, or how new building materials hold up under extreme earthquake conditions. The Handbook of Materials Behavior Models: Gathers together 117 models of behavior of materials written by the most eminent specialists in their field Presents each model's domain of validity, a short background, its formulation, a methodology to identify the materials parameters, advise on how to use it in practical applications as well as extensive references Covers all solid materials: metals, alloys, ceramics, polymers, composites, concrete, wood, rubber, geomaterials such as rocks, soils, sand, clay, biomaterials, etc Concerns all engineering phenomena: elasticity, viscoelasticity, yield limit, plasticity, viscoplasticity, damage, fracture, friction, and wear
Download or read book Unified Plasticity for Engineering Applications written by Sol R. Bodner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considerably simplified models of macroscopic material behavior, such as the idealization for metals of elastic-time independent plastic response with a yield (onset) criterion, have served the engineering profession well for many years. They are still basic to the design and analysis of most structural applications. In the need to use materials more effectively, there are circumstances where those traditional models are not adequate, and constitutive laws that are more physically realistic have to be employed. This is especially relevant to conditions where the inherent time dependence of inelastic deformations, referred to as "viscoplasticity", is pronounced such as at elevated temperatures and for high strain rates. Unified theories of elastic-viscoplastic material behavior, which are primarily applicable for metals and metallic alloys, combine all aspects of inelastic response into a set of time dependent equations with a single inelastic strain rate variable. For such theories, creep under constant stress, stress relaxation under constant strain, and stress-strain relations at constant rates are each special cases of a general formulation. Those equations mayor may not include a yield criterion, but models which do not separate a fully elastic region from the overall response could be considered "unified" in a more general sense. The theories have reached a level of development and maturity where they are being used in a number of sophisticated engineering applications. However, they have not yet become a standard method of material representation for general engineering practice.
Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.
Download or read book Nonlinear Constitutive Relations for High Temperature Applications 1986 written by and published by . This book was released on 1988 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Unified Constitutive Laws of Plastic Deformation written by A. S. Krausz and published by Elsevier. This book was released on 1996-05-31 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-technology industries using plastic deformation demand soundly-based economical decisions in manufacturing design and product testing, and the unified constitutive laws of plastic deformation give researchers aguideline to use in making these decisions. This book provides extensive guidance in low cost manufacturing without the loss of product quality. Each highly detailed chapter of Unified Constitutive Laws of Plastic Deformation focuses on a distinct set of defining equations. Topics covered include anisotropic and viscoplastic flow, and the overall kinetics and thermodynamics of deformation. This important book deals with a prime topic in materials science and engineering, and will be of great use toboth researchers and graduate students. - Describes the theory and applications of the constitutive law of plastic deformation for materials testing - Examines the constitutive law of plastic deformation as it applies to process and product design - Includes a program on disk for the determination and development of the constitutive law of plastic deformation - Considers economical design and testing methods
Download or read book Constitutive Modeling of Engineering Materials written by Vladimir Buljak and published by Academic Press. This book was released on 2021-02-18 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Constitutive Modeling of Engineering Materials provides an extensive theoretical overview of elastic, plastic, damage, and fracture models, giving readers the foundational knowledge needed to successfully apply them to and solve common engineering material problems. Particular attention is given to inverse analysis, parameter identification, and the numerical implementation of models with the finite element method. Application in practice is discussed in detail, showing examples of working computer programs for simple constitutive behaviors. Examples explore the important components of material modeling which form the building blocks of any complex constitutive behavior. - Addresses complex behaviors in a wide range of materials, from polymers, to metals and shape memory alloys - Covers constitutive models with both small and large deformations - Provides detailed examples of computer implementations for material models
Download or read book Unified Constitutive Equations for Creep and Plasticity written by A.K. Miller and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Constitutive equations refer to 'the equations that constitute the material response' at any point within an object. They are one of the ingredients necessary to predict the deformation and fracture response of solid bodies (among other ingredients such as the equations of equilibrium and compatibility and mathematical descriptions of the configuration and loading history). These ingredients are generally combined together in complicated computer programs, such as finite element analyses, which serve to both codify the pertinent knowledge and to provide convenient tools for making predictions of peak stresses, plastic strain ranges, crack growth rates, and other quantities of interest. Such predictions fall largely into two classes: structural analysis and manufacturing analysis. In the first category, the usual purpose is life prediction, for assessment of safety, reliability, durability, and/or operational strategies. Some high-technology systems limited by mechanical behavior, and therefore requiring accurate life assess ments, include rocket engines (the space-shuttle main engine being a prominent example), piping and pressure vessels in nuclear and non-nuclear power plants (for example, heat exchanger tubes in solar central receivers and reformer tubes in high-temperature gas-cooled reactors used for process heat applications), and the ubiquitous example of the jet engine turbine blade. In structural analysis, one is sometimes concerned with predicting distortion per se, but more often, one is concerned with predicting fracture; in these cases the informa tion about deformation is an intermediate result en route to the final goal of a life prediction.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1989 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Mechanics of Constitutive Modeling written by Niels Saabye Ottosen and published by Elsevier. This book was released on 2005-09-28 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Constitutive modelling is the mathematical description of how materials respond to various loadings. This is the most intensely researched field within solid mechanics because of its complexity and the importance of accurate constitutive models for practical engineering problems. Topics covered include: Elasticity - Plasticity theory - Creep theory - The nonlinear finite element method - Solution of nonlinear equilibrium equations - Integration of elastoplastic constitutive equations - The thermodynamic framework for constitutive modelling – Thermoplasticity - Uniqueness and discontinuous bifurcations • More comprehensive in scope than competitive titles, with detailed discussion of thermodynamics and numerical methods. • Offers appropriate strategies for numerical solution, illustrated by discussion of specific models. • Demonstrates each topic in a complete and self-contained framework, with extensive referencing.
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1989 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Maximum Dissipation Non Equilibrium Thermodynamics and its Geometric Structure written by Henry W. Haslach Jr. and published by Springer Science & Business Media. This book was released on 2011-01-15 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maximum Dissipation: Non-Equilibrium Thermodynamics and its Geometric Structure explores the thermodynamics of non-equilibrium processes in materials. The book develops a general technique created in order to construct nonlinear evolution equations describing non-equilibrium processes, while also developing a geometric context for non-equilibrium thermodynamics. Solid materials are the main focus in this volume, but the construction is shown to also apply to fluids. This volume also: • Explains the theory behind thermodynamically-consistent construction of non-linear evolution equations for non-equilibrium processes • Provides a geometric setting for non-equilibrium thermodynamics through several standard models, which are defined as maximum dissipation processes • Emphasizes applications to the time-dependent modeling of soft biological tissue Maximum Dissipation: Non-Equilibrium Thermodynamics and its Geometric Structure will be valuable for researchers, engineers and graduate students in non-equilibrium thermodynamics and the mathematical modeling of material behavior.
Download or read book Encyclopedia of Iron Steel and Their Alloys Online Version written by Rafael Colás and published by CRC Press. This book was released on 2016-01-06 with total page 3918 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]
Download or read book Modeling and Simulation for Microelectronic Packaging Assembly written by Shen Liu and published by John Wiley & Sons. This book was released on 2011-05-17 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although there is increasing need for modeling and simulation in the IC package design phase, most assembly processes and various reliability tests are still based on the time consuming "test and try out" method to obtain the best solution. Modeling and simulation can easily ensure virtual Design of Experiments (DoE) to achieve the optimal solution. This has greatly reduced the cost and production time, especially for new product development. Using modeling and simulation will become increasingly necessary for future advances in 3D package development. In this book, Liu and Liu allow people in the area to learn the basic and advanced modeling and simulation skills to help solve problems they encounter. Models and simulates numerous processes in manufacturing, reliability and testing for the first time Provides the skills necessary for virtual prototyping and virtual reliability qualification and testing Demonstrates concurrent engineering and co-design approaches for advanced engineering design of microelectronic products Covers packaging and assembly for typical ICs, optoelectronics, MEMS, 2D/3D SiP, and nano interconnects Appendix and color images available for download from the book's companion website Liu and Liu have optimized the book for practicing engineers, researchers, and post-graduates in microelectronic packaging and interconnection design, assembly manufacturing, electronic reliability/quality, and semiconductor materials. Product managers, application engineers, sales and marketing staff, who need to explain to customers how the assembly manufacturing, reliability and testing will impact their products, will also find this book a critical resource. Appendix and color version of selected figures can be found at www.wiley.com/go/liu/packaging
Download or read book Creep and Fracture in High Temperature Components written by European Creep Collaborative Committee and published by DEStech Publications, Inc. This book was released on 2005 with total page 1136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides information from around the world on creep in multiple high-temperature metals, alloys, and advanced materials.
Download or read book Numerical Implementation and Application of Constitutive Models in the Finite Element Method written by James A. Sherwood and published by . This book was released on 1995 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses constitutive materials models that in the laboratory have shown good correlation to test data and have accurately predicted material behaviour over a wide range of loading conditions, but have not been tested under practical conditions enough to be reliable for actual engineering work.
Download or read book Modeling and Simulation for Material Selection and Mechanical Design written by George E. Totten and published by CRC Press. This book was released on 2003-12-02 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference describes advanced computer modeling and simulation procedures to predict material properties and component design including mechanical properties, microstructural evolution, and materials behavior and performance. The book illustrates the most effective modeling and simulation technologies relating to surface-engineered compounds, fastener design, quenching and tempering during heat treatment, and residual stresses and distortion during forging, casting, and heat treatment. With contributions from internationally recognized experts in the field, it enables researchers to enhance engineering processes and reduce production costs in materials and component development.
