Download or read book Design of High speed Communication Circuits written by Ramesh Harjani and published by World Scientific. This book was released on 2006 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: MOS technology has rapidly become the de facto standard for mixed-signal integrated circuit design due to the high levels of integration possible as device geometries shrink to nanometer scales. The reduction in feature size means that the number of transistor and clock speeds have increased significantly. In fact, current day microprocessors contain hundreds of millions of transistors operating at multiple gigahertz. Furthermore, this reduction in feature size also has a significant impact on mixed-signal circuits. Due to the higher levels of integration, the majority of ASICs possesses some analog components. It has now become nearly mandatory to integrate both analog and digital circuits on the same substrate due to cost and power constraints. This book presents some of the newer problems and opportunities offered by the small device geometries and the high levels of integration that is now possible. The aim of this book is to summarize some of the most critical aspects of high-speed analog/RF communications circuits. Attention is focused on the impact of scaling, substrate noise, data converters, RF and wireless communication circuits and wireline communication circuits, including high-speed I/O. Contents: Achieving Analog Accuracy in Nanometer CMOS (M P Flynn et al.); Self-Induced Noise in Integrated Circuits (R Gharpurey & S Naraghi); High-Speed Oversampling Analog-to-Digital Converters (A Gharbiya et al.); Designing LC VCOs Using Capacitive Degeneration Techniques (B Jung & R Harjani); Fully Integrated Frequency Synthesizers: A Tutorial (S T Moon et al.); Recent Advances and Design Trends in CMOS Radio Frequency Integrated Circuits (D J Allstot et al.); Equalizers for High-Speed Serial Links (P K Hanumolu et al.); Low-Power, Parallel Interface with Continuous-Time Adaptive Passive Equalizer and Crosstalk Cancellation (C P Yue et al.). Readership: Technologists, scientists, and engineers in the field of high-speed communication circuits. It can also be used as a textbook for graduate and advanced undergraduate courses.
Download or read book Design of High speed Communication Circuits written by Ramesh Harjani and published by World Scientific. This book was released on 2006 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: MOS technology has rapidly become the de facto standard for mixed-signal integrated circuit design due to the high levels of integration possible as device geometries shrink to nanometer scales. The reduction in feature size means that the number of transistor and clock speeds have increased significantly. In fact, current day microprocessors contain hundreds of millions of transistors operating at multiple gigahertz. Furthermore, this reduction in feature size also has a significant impact on mixed-signal circuits. Due to the higher levels of integration, the majority of ASICs possesses some analog components. It has now become nearly mandatory to integrate both analog and digital circuits on the same substrate due to cost and power constraints. This book presents some of the newer problems and opportunities offered by the small device geometries and the high levels of integration that is now possible.The aim of this book is to summarize some of the most critical aspects of high-speed analog/RF communications circuits. Attention is focused on the impact of scaling, substrate noise, data converters, RF and wireless communication circuits and wireline communication circuits, including high-speed I/O.
Download or read book Electromagnetics for High Speed Analog and Digital Communication Circuits written by Ali M. Niknejad and published by Cambridge University Press. This book was released on 2007-02-22 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern communications technology demands smaller, faster and more efficient circuits. This book reviews the fundamentals of electromagnetism in passive and active circuit elements, highlighting various effects and potential problems in designing a new circuit. The author begins with a review of the basics - the origin of resistance, capacitance, and inductance - then progresses to more advanced topics such as passive device design and layout, resonant circuits, impedance matching, high-speed switching circuits, and parasitic coupling and isolation techniques. Using examples and applications in RF and microwave systems, the author describes transmission lines, transformers, and distributed circuits. State-of-the-art developments in Si based broadband analog, RF, microwave, and mm-wave circuits are reviewed. With up-to-date results, techniques, practical examples, illustrations and worked examples, this book will be valuable to advanced undergraduate and graduate students of electrical engineering, and practitioners in the IC design industry. Further resources for this title are available at www.cambridge.org/9780521853507.
Download or read book High speed Integrated Circuit Technology written by Mark J. W. Rodwell and published by World Scientific. This book was released on 2001 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the state of the art of very high speed digital integrated circuits. Commercial applications are in fiber optic transmission systems operating at 10, 40, and 100 Gb/s, while the military application is ADCs and DACs for microwave radar. The book contains detailed descriptions of the design, fabrication, and performance of wideband Si/SiGe-, GaAs-, and InP-based bipolar transistors. The analysis, design, and performance of high speed CMOS, silicon bipolar, and III-V digital ICs are presented in detail, with emphasis on application in optical fiber transmission and mixed signal ICs. The underlying physics and circuit design of rapid single flux quantum (RSFQ) superconducting logic circuits are reviewed, and there is extensive coverage of recent integrated circuit results in this technology.
Download or read book High speed Optical Transceivers Integrated Circuits Designs And Optical Devices Techniques written by Yuyu Liu and published by World Scientific. This book was released on 2006-03-09 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the unique advantages and large inherent transmission capacity of optical fiber communication systems. The long-term and high-risk research challenges of optical transceivers are analyzed with a view to sustaining the seemingly insatiable demand for bandwidth. A broad coverage of topics relating to the design of high-speed optical devices and integrated circuits, oriented to low power, low cost, and small area, is discussed.Written by specialists with many years of research and engineering experience in the field of optical fiber communication, this book is essential for an audience dedicated to the development of integrated electronic systems for optical communication applications. It can also be used as a supplementary text for graduate courses on optical transceiver IC design.
Download or read book High Speed Devices and Circuits with THz Applications written by Jung Han Choi and published by CRC Press. This book was released on 2014-07-22 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the cutting-edge results of new device developments and circuit implementations, High-Speed Devices and Circuits with THz Applications covers the recent advancements of nano devices for terahertz (THz) applications and the latest high-speed data rate connectivity technologies from system design to integrated circuit (IC) design, providing relevant standard activities and technical specifications. Featuring the contributions of leading experts from industry and academia, this pivotal work: Discusses THz sensing and imaging devices based on nano devices and materials Describes silicon on insulator (SOI) multigate nanowire field-effect transistors (FETs) Explains the theory underpinning nanoscale nanowire metal-oxide-semiconductor field-effect transistors (MOSFETs), simulation methods, and their results Explores the physics of the silicon-germanium (SiGe) heterojunction bipolar transistor (HBT), as well as commercially available SiGe HBT devices and their applications Details aspects of THz IC design using standard silicon (Si) complementary metal-oxide-semiconductor (CMOS) devices, including experimental setups for measurements, detection methods, and more An essential text for the future of high-frequency engineering, High-Speed Devices and Circuits with THz Applications offers valuable insight into emerging technologies and product possibilities that are attractive in terms of mass production and compatibility with current manufacturing facilities.
Download or read book CMOS Analog Integrated Circuits written by Tertulien Ndjountche and published by CRC Press. This book was released on 2019-12-17 with total page 1176 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-speed, power-efficient analog integrated circuits can be used as standalone devices or to interface modern digital signal processors and micro-controllers in various applications, including multimedia, communication, instrumentation, and control systems. New architectures and low device geometry of complementary metaloxidesemiconductor (CMOS) technologies have accelerated the movement toward system on a chip design, which merges analog circuits with digital, and radio-frequency components.
Download or read book High Performance Multi Channel High Speed I O Circuits written by Taehyoun Oh and published by Springer Science & Business Media. This book was released on 2013-09-07 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes design techniques that can be used to mitigate crosstalk in high-speed I/O circuits. The focus of the book is in developing compact and low power integrated circuits for crosstalk cancellation, inter-symbol interference (ISI) mitigation and improved bit error rates (BER) at higher speeds. This book is one of the first to discuss in detail the problem of crosstalk and ISI mitigation encountered as data rates have continued beyond 10Gb/s. Readers will learn to avoid the data performance cliff, with circuits and design techniques described for novel, low power crosstalk cancellation methods that are easily combined with current ISI mitigation architectures.
Download or read book Design of Integrated Circuits for Optical Communications written by Behzad Razavi and published by John Wiley & Sons. This book was released on 2012-08-21 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only book on integrated circuits for optical communications that fully covers High-Speed IOs, PLLs, CDRs, and transceiver design including optical communication The increasing demand for high-speed transport of data has revitalized optical communications, leading to extensive work on high-speed device and circuit design. With the proliferation of the Internet and the rise in the speed of microprocessors and memories, the transport of data continues to be the bottleneck, motivating work on faster communication channels. Design of Integrated Circuits for Optical Communications, Second Edition deals with the design of high-speed integrated circuits for optical communication transceivers. Building upon a detailed understanding of optical devices, the book describes the analysis and design of critical building blocks, such as transimpedance and limiting amplifiers, laser drivers, phase-locked loops, oscillators, clock and data recovery circuits, and multiplexers. The Second Edition of this bestselling textbook has been fully updated with: A tutorial treatment of broadband circuits for both students and engineers New and unique information dealing with clock and data recovery circuits and multiplexers A chapter dedicated to burst-mode optical communications A detailed study of new circuit developments for optical transceivers An examination of recent implementations in CMOS technology This text is ideal for senior graduate students and engineers involved in high-speed circuit design for optical communications, as well as the more general field of wireline communications.
Download or read book CMOS Continuous Time Adaptive Equalizers for High Speed Serial Links written by Cecilia Gimeno Gasca and published by Springer. This book was released on 2014-09-22 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to the design of adaptive equalization solutions integrated in standard CMOS technology for high-speed serial links. Since continuous-time equalizers offer various advantages as an alternative to discrete-time equalizers at multi-gigabit rates, this book provides a detailed description of continuous-time adaptive equalizers design - both at transistor and system levels-, their main characteristics and performances. The authors begin with a complete review and analysis of the state of the art of equalizers for wireline applications, describing why they are necessary, their types, and their main applications. Next, theoretical fundamentals of continuous-time adaptive equalizers are explored. Then, new structures are proposed to implement the different building blocks of the adaptive equalizer: line equalizer, loop-filters, power comparator, etc. The authors demonstrate the design of a complete low-power, low-voltage, high-speed, continuous-time adaptive equalizer. Finally, a cost-effective CMOS receiver which includes the proposed continuous-time adaptive equalizer is designed for 1.25 Gb/s optical communications through 50-m length, 1-mm diameter plastic optical fiber (POF).
Download or read book Low Power Wireless Communication Circuits and Systems written by Kiat Seng Yeo and published by CRC Press. This book was released on 2018-05-03 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demand for extremely high-data-rate communications has urged researchers to develop new communication systems. Currently, wireless transmission with more than one Giga-bits-per-second (Gbps) data rates is becoming essential due to increased connectivity between different portable and smart devices. To realize Gbps data rates, millimeter-wave (MMW) bands around 60 GHz is attractive due to the availability of large bandwidth of 9 GHz. Recent research work in the Gbps data rates around 60 GHz band has focused on short-range indoor applications, such as uncompressed video transfer, high-speed file transfer between electronic devices, and communication to and from kiosk. Many of these applications are limited to 10 m or less, because of the huge free space path loss and oxygen absorption for 60 GHz band MMW signal. This book introduces new knowledge and novel circuit techniques to design low-power MMW circuits and systems. It also focuses on unlocking the potential applications of the 60 GHz band for high-speed outdoor applications. The innovative design application significantly improves and enables high-data-rate low-cost communication links between two access points seamlessly. The 60 GHz transceiver system-on-chip provides an alternative solution to upgrade existing networks without introducing any building renovation or external network laying works.
Download or read book High Frequency Integrated Circuits written by Sorin Voinigescu and published by Cambridge University Press. This book was released on 2013-02-28 with total page 921 pages. Available in PDF, EPUB and Kindle. Book excerpt: A transistor-level, design-intensive overview of high speed and high frequency monolithic integrated circuits for wireless and broadband systems from 2 GHz to 200 GHz, this comprehensive text covers high-speed, RF, mm-wave, and optical fibre circuits using nanoscale CMOS, SiGe BiCMOS, and III-V technologies. Step-by-step design methodologies, end-of chapter problems, and practical simulation and design projects are provided, making this an ideal resource for senior undergraduate and graduate courses in circuit design. With an emphasis on device-circuit topology interaction and optimization, it gives circuit designers and students alike an in-depth understanding of device structures and process limitations affecting circuit performance.
Download or read book Low Power Wireless Communication Circuits and Systems written by Kiat Seng Yeo and published by CRC Press. This book was released on 2018-05-03 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demand for extremely high-data-rate communications has urged researchers to develop new communication systems. Currently, wireless transmission with more than one Giga-bits-per-second (Gbps) data rates is becoming essential due to increased connectivity between different portable and smart devices. To realize Gbps data rates, millimeter-wave (MMW) bands around 60 GHz is attractive due to the availability of large bandwidth of 9 GHz. Recent research work in the Gbps data rates around 60 GHz band has focused on short-range indoor applications, such as uncompressed video transfer, high-speed file transfer between electronic devices, and communication to and from kiosk. Many of these applications are limited to 10 m or less, because of the huge free space path loss and oxygen absorption for 60 GHz band MMW signal. This book introduces new knowledge and novel circuit techniques to design low-power MMW circuits and systems. It also focuses on unlocking the potential applications of the 60 GHz band for high-speed outdoor applications. The innovative design application significantly improves and enables high-data-rate low-cost communication links between two access points seamlessly. The 60 GHz transceiver system-on-chip provides an alternative solution to upgrade existing networks without introducing any building renovation or external network laying works.
Download or read book High Speed CMOS Circuits for Optical Receivers written by Jafar Savoj and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the exponential growth of the number of Internet nodes, the volume of the data transported on the backbone has increased with the same trend. The load of the global Internet backbone will soon increase to tens of terabits per second. This indicates that the backbone bandwidth requirements will increase by a factor of 50 to 100 every seven years. Transportation of such high volumes of data requires suitable media with low loss and high bandwidth. Among the available transmission media, optical fibers achieve the best performance in terms of loss and bandwidth. High-speed data can be transported over hundreds of kilometers of single-mode fiber without significant loss in signal integrity. These fibers progressively benefit from reduction of cost and improvement of perf- mance. Meanwhile, the electronic interfaces used in an optical network are not capable of exploiting the ultimate bandwidth of the fiber, limiting the throughput of the network. Different solutions at both the system and the circuit levels have been proposed to increase the data rate of the backbone. System-level solutions are based on the utilization of wave-division multiplexing (WDM), using different colors of light to transmit s- eral sequences simultaneously. In parallel with that, a great deal of effort has been put into increasing the operating rate of the electronic transceivers using highly-developed fabrication processes and novel c- cuit techniques.
Download or read book High speed Digital Design written by Howard W. Johnson and published by . This book was released on 1993-01-01 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focused on the field of knowledge lying between digital and analog circuit theory, this new text will help engineers working with digital systems shorten their product development cycles and help fix their latest design problems. The scope of the material covered includes signal reflection, crosstalk, and noise problems which occur in high speed digital machines (above 10 megahertz). This volume will be of practical use to digital logic designers, staff and senior communications scientists, and all those interested in digital design.
Download or read book Design of Analog CMOS Integrated Circuits written by Behzad Razavi and published by . This book was released on 2001 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Terahertz CMOS Integrated Circuits for High Speed Wireless Communication written by Minoru Fujishima and published by Institution of Engineering and Technology. This book was released on 2019-06-24 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Communications technology at a frequency range into Terahertz (THz) levels has attracted attention because it promises near-fibre-optic-speed wireless links for the 5G and post-5G world. Transmitter and receiver integrated circuits based on CMOS, which has the ability to realize such circuits with low power consumption at a low cost, are expected to become increasingly widespread, with much research into the underlying electronics currently underway.
