Download or read book High Speed Integrated Circuit Technology Towards 100 Ghz Logic written by Mark Rodwell and published by World Scientific. This book was released on 2001-04-24 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the state of the art of very high speed digital integrated circuits. Commercial applications are in fiber optic transmission systems operating at 10, 40, and 100 Gb/s, while the military application is ADCs and DACs for microwave radar. The book contains detailed descriptions of the design, fabrication, and performance of wideband Si/SiGe-, GaAs-, and InP-based bipolar transistors. The analysis, design, and performance of high speed CMOS, silicon bipolar, and III-V digital ICs are presented in detail, with emphasis on application in optical fiber transmission and mixed signal ICs. The underlying physics and circuit design of rapid single flux quantum (RSFQ) superconducting logic circuits are reviewed, and there is extensive coverage of recent integrated circuit results in this technology.
Download or read book High speed Digital Circuits written by Masakazu Shoji and published by Prentice Hall PTR. This book was released on 1996 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital circuit technology is the future of the telecommunications, semiconductor, and network industries. It is essential for engineers involved in VLSI and integrated circuit design to become informed of this emerging technology. This book covers all facets of the technology, from basic theories of physics to a practical guide for designing and implementing digital circuits.
Download or read book Electromagnetics for High Speed Analog and Digital Communication Circuits written by Ali M. Niknejad and published by Cambridge University Press. This book was released on 2007-02-22 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern communications technology demands smaller, faster and more efficient circuits. This book reviews the fundamentals of electromagnetism in passive and active circuit elements, highlighting various effects and potential problems in designing a new circuit. The author begins with a review of the basics - the origin of resistance, capacitance, and inductance - then progresses to more advanced topics such as passive device design and layout, resonant circuits, impedance matching, high-speed switching circuits, and parasitic coupling and isolation techniques. Using examples and applications in RF and microwave systems, the author describes transmission lines, transformers, and distributed circuits. State-of-the-art developments in Si based broadband analog, RF, microwave, and mm-wave circuits are reviewed. With up-to-date results, techniques, practical examples, illustrations and worked examples, this book will be valuable to advanced undergraduate and graduate students of electrical engineering, and practitioners in the IC design industry. Further resources for this title are available at www.cambridge.org/9780521853507.
Download or read book Design of High speed Communication Circuits written by Ramesh Harjani and published by World Scientific. This book was released on 2006 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: MOS technology has rapidly become the de facto standard for mixed-signal integrated circuit design due to the high levels of integration possible as device geometries shrink to nanometer scales. The reduction in feature size means that the number of transistor and clock speeds have increased significantly. In fact, current day microprocessors contain hundreds of millions of transistors operating at multiple gigahertz. Furthermore, this reduction in feature size also has a significant impact on mixed-signal circuits. Due to the higher levels of integration, the majority of ASICs possesses some analog components. It has now become nearly mandatory to integrate both analog and digital circuits on the same substrate due to cost and power constraints. This book presents some of the newer problems and opportunities offered by the small device geometries and the high levels of integration that is now possible. The aim of this book is to summarize some of the most critical aspects of high-speed analog/RF communications circuits. Attention is focused on the impact of scaling, substrate noise, data converters, RF and wireless communication circuits and wireline communication circuits, including high-speed I/O. Contents: Achieving Analog Accuracy in Nanometer CMOS (M P Flynn et al.); Self-Induced Noise in Integrated Circuits (R Gharpurey & S Naraghi); High-Speed Oversampling Analog-to-Digital Converters (A Gharbiya et al.); Designing LC VCOs Using Capacitive Degeneration Techniques (B Jung & R Harjani); Fully Integrated Frequency Synthesizers: A Tutorial (S T Moon et al.); Recent Advances and Design Trends in CMOS Radio Frequency Integrated Circuits (D J Allstot et al.); Equalizers for High-Speed Serial Links (P K Hanumolu et al.); Low-Power, Parallel Interface with Continuous-Time Adaptive Passive Equalizer and Crosstalk Cancellation (C P Yue et al.). Readership: Technologists, scientists, and engineers in the field of high-speed communication circuits. It can also be used as a textbook for graduate and advanced undergraduate courses.
Download or read book High Performance Multi Channel High Speed I O Circuits written by Taehyoun Oh and published by Springer Science & Business Media. This book was released on 2013-09-07 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes design techniques that can be used to mitigate crosstalk in high-speed I/O circuits. The focus of the book is in developing compact and low power integrated circuits for crosstalk cancellation, inter-symbol interference (ISI) mitigation and improved bit error rates (BER) at higher speeds. This book is one of the first to discuss in detail the problem of crosstalk and ISI mitigation encountered as data rates have continued beyond 10Gb/s. Readers will learn to avoid the data performance cliff, with circuits and design techniques described for novel, low power crosstalk cancellation methods that are easily combined with current ISI mitigation architectures.
Download or read book High Speed Electronics and Optoelectronics written by Sheila Prasad and published by Cambridge University Press. This book was released on 2009-06-18 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative account of electronic and optoelectronic devices covers the fundamental principles of operation, and, uniquely, their circuit applications too.
Download or read book High Speed Devices and Circuits with THz Applications written by Jung Han Choi and published by CRC Press. This book was released on 2014-07-22 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the cutting-edge results of new device developments and circuit implementations, High-Speed Devices and Circuits with THz Applications covers the recent advancements of nano devices for terahertz (THz) applications and the latest high-speed data rate connectivity technologies from system design to integrated circuit (IC) design, providing relevant standard activities and technical specifications. Featuring the contributions of leading experts from industry and academia, this pivotal work: Discusses THz sensing and imaging devices based on nano devices and materials Describes silicon on insulator (SOI) multigate nanowire field-effect transistors (FETs) Explains the theory underpinning nanoscale nanowire metal-oxide-semiconductor field-effect transistors (MOSFETs), simulation methods, and their results Explores the physics of the silicon-germanium (SiGe) heterojunction bipolar transistor (HBT), as well as commercially available SiGe HBT devices and their applications Details aspects of THz IC design using standard silicon (Si) complementary metal-oxide-semiconductor (CMOS) devices, including experimental setups for measurements, detection methods, and more An essential text for the future of high-frequency engineering, High-Speed Devices and Circuits with THz Applications offers valuable insight into emerging technologies and product possibilities that are attractive in terms of mass production and compatibility with current manufacturing facilities.
Download or read book High Speed CMOS Circuits for Optical Receivers written by Jafar Savoj and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the exponential growth of the number of Internet nodes, the volume of the data transported on the backbone has increased with the same trend. The load of the global Internet backbone will soon increase to tens of terabits per second. This indicates that the backbone bandwidth requirements will increase by a factor of 50 to 100 every seven years. Transportation of such high volumes of data requires suitable media with low loss and high bandwidth. Among the available transmission media, optical fibers achieve the best performance in terms of loss and bandwidth. High-speed data can be transported over hundreds of kilometers of single-mode fiber without significant loss in signal integrity. These fibers progressively benefit from reduction of cost and improvement of perf- mance. Meanwhile, the electronic interfaces used in an optical network are not capable of exploiting the ultimate bandwidth of the fiber, limiting the throughput of the network. Different solutions at both the system and the circuit levels have been proposed to increase the data rate of the backbone. System-level solutions are based on the utilization of wave-division multiplexing (WDM), using different colors of light to transmit s- eral sequences simultaneously. In parallel with that, a great deal of effort has been put into increasing the operating rate of the electronic transceivers using highly-developed fabrication processes and novel c- cuit techniques.
Download or read book CMOS Analog Integrated Circuits written by Tertulien Ndjountche and published by CRC Press. This book was released on 2019-12-17 with total page 1176 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-speed, power-efficient analog integrated circuits can be used as standalone devices or to interface modern digital signal processors and micro-controllers in various applications, including multimedia, communication, instrumentation, and control systems. New architectures and low device geometry of complementary metaloxidesemiconductor (CMOS) technologies have accelerated the movement toward system on a chip design, which merges analog circuits with digital, and radio-frequency components.
Download or read book On Chip Inductance in High Speed Integrated Circuits written by Yehea I. Ismail and published by Springer Science & Business Media. This book was released on 2001-02-28 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research monograph deals with the design and analysis of integrated circuits, and describes how on-chip inductance can have a tangible effect on high speed integrated circuits. Ismail (Northwestern University) and Friedman (University of Rochester) review basic transmission line theory, methods for evaluating the transient response of linear networks, and characterization of MOS transistors. They then introduce a closed form solution for the propagation delay of a CMOS gate driving a lossy transmission line with a terminating CMOS gate. Further discussion includes waveform characterization of signals at different nodes of an RLC tree, dynamic and short-circuit power of CMOS gates driving lossless transmission lines, and the direct truncation of the transfer function (DTT) method for evaluation of the transient response in RLC circuits. c. Book News Inc.
Download or read book High Speed Digital Design written by Hanqiao Zhang and published by Elsevier. This book was released on 2015-08-17 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Speed Digital Design discusses the major factors to consider in designing a high speed digital system and how design concepts affect the functionality of the system as a whole. It will help you understand why signals act so differently on a high speed digital system, identify the various problems that may occur in the design, and research solutions to minimize their impact and address their root causes. The authors offer a strong foundation that will help you get high speed digital system designs right the first time. Taking a systems design approach, High Speed Digital Design offers a progression from fundamental to advanced concepts, starting with transmission line theory, covering core concepts as well as recent developments. It then covers the challenges of signal and power integrity, offers guidelines for channel modeling, and optimizing link circuits. Tying together concepts presented throughout the book, the authors present Intel processors and chipsets as real-world design examples. - Provides knowledge and guidance in the design of high speed digital circuits - Explores the latest developments in system design - Covers everything that encompasses a successful printed circuit board (PCB) product - Offers insight from Intel insiders about real-world high speed digital design
Download or read book Designing High speed Interconnect Circuits written by Dennis Miller and published by . This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Miller, who has dedicated over four decades to the electronics industry, has written this book for experienced engineers responsible for digital design and signal integrity who want to create digital connections that operate at microwave frequencies. Starting with a short history of digital interconnections, Miller continues with descriptions of tr
Download or read book High speed Digital Design written by Howard W. Johnson and published by . This book was released on 1993-01-01 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focused on the field of knowledge lying between digital and analog circuit theory, this new text will help engineers working with digital systems shorten their product development cycles and help fix their latest design problems. The scope of the material covered includes signal reflection, crosstalk, and noise problems which occur in high speed digital machines (above 10 megahertz). This volume will be of practical use to digital logic designers, staff and senior communications scientists, and all those interested in digital design.
Download or read book High Frequency Integrated Circuits written by Sorin Voinigescu and published by Cambridge University Press. This book was released on 2013-02-28 with total page 921 pages. Available in PDF, EPUB and Kindle. Book excerpt: A transistor-level, design-intensive overview of high speed and high frequency monolithic integrated circuits for wireless and broadband systems from 2 GHz to 200 GHz, this comprehensive text covers high-speed, RF, mm-wave, and optical fibre circuits using nanoscale CMOS, SiGe BiCMOS, and III-V technologies. Step-by-step design methodologies, end-of chapter problems, and practical simulation and design projects are provided, making this an ideal resource for senior undergraduate and graduate courses in circuit design. With an emphasis on device-circuit topology interaction and optimization, it gives circuit designers and students alike an in-depth understanding of device structures and process limitations affecting circuit performance.
Download or read book Analog Circuit Design written by Rudy J. van de Plassche and published by Springer Science & Business Media. This book was released on 2000-09-30 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Analog Circuit Design concentrates on 3 topics: High-Speed Analog-to-Digital Converters, Mixed Signal Design and PLLs and Synthesizers. The book comprises 6 papers on each topic written by internationally recognized experts. These papers have a tutorial nature aimed at improving the design of analog circuits. The book is divided into 3 parts: Part I, High-Speed Analog-to-Digital Converters, describes the latest techniques for producing analog-to-digital converters for applications in disk drives, radio circuits, XDSL and super HiFi audio conversion. Converters having resolutions between 7-bit and 12-bit using CMOS techniques are presented. A 13-bit bandpass sigma-delta modulator for IF signal conversion concludes this part. Part II, Mixed Signal Design, presents papers that detail nearly all known techniques and design issues for mixed signal circuits using CAD tools. Applications for telecom, sigma-delta converters, systems-on-a-chip and RF circuitry are described. Part III, PLLs and Synthesizers, illustrates up-to-date techniques for combination of inductors on a CMOS chip together with PLL techniques to obtain low-noise frequency synthesizers for telecom applications. Special attention is paid to fractional N synthesizers using sigma-delta algorithms. Analog Circuit Design is an essential reference source for analog design engineers and researchers wishing to keep abreast with the latest developments in the field. The tutorial nature of the contributions also makes it suitable for use in an advanced design course.
Download or read book DRAM Circuit Design written by Brent Keeth and published by John Wiley & Sons. This book was released on 2007-12-04 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern, comprehensive introduction to DRAM for students and practicing chip designers Dynamic Random Access Memory (DRAM) technology has been one of the greatestdriving forces in the advancement of solid-state technology. With its ability to produce high product volumes and low pricing, it forces solid-state memory manufacturers to work aggressively to cut costs while maintaining, if not increasing, their market share. As a result, the state of the art continues to advance owing to the tremendous pressure to get more memory chips from each silicon wafer, primarily through process scaling and clever design. From a team of engineers working in memory circuit design, DRAM Circuit Design gives students and practicing chip designers an easy-to-follow, yet thorough, introductory treatment of the subject. Focusing on the chip designer rather than the end user, this volume offers expanded, up-to-date coverage of DRAM circuit design by presenting both standard and high-speed implementations. Additionally, it explores a range of topics: the DRAM array, peripheral circuitry, global circuitry and considerations, voltage converters, synchronization in DRAMs, data path design, and power delivery. Additionally, this up-to-date and comprehensive book features topics in high-speed design and architecture and the ever-increasing speed requirements of memory circuits. The only book that covers the breadth and scope of the subject under one cover, DRAM Circuit Design is an invaluable introduction for students in courses on memory circuit design or advanced digital courses in VLSI or CMOS circuit design. It also serves as an essential, one-stop resource for academics, researchers, and practicing engineers.
Download or read book High Frequency Measurements and Noise in Electronic Circuits written by Douglas C. Smith and published by Springer Science & Business Media. This book was released on 1992-12-31 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This ready reference provides electrical engineers with practical information on accurate methods for measuring signals and noise in electronic circuits as well as methods for locating and reducing high frequency noise generated by circuits or external interference. Engineers often find that measuring and mitigating high frequency noise signals in electronic circuits can be problematic when utilizing common measurement methods. Demonstrating the innovative solutions he developed as a Distinguished Member of Technical Staff at AT&T/Bell Laboratories, solutions which earned him numerous U.S. and foreign patents, Douglas Smith has written the most definitive work on this subject. Smith explains design problems related to the new high frequency electronic standards, and then systematically provides laboratory proven methods for making accurate noise measurements, while demonstrating how these results should be interpreted. The technical background needed to conduct these experiments is provided as an aid to the novice, and as a reference for the professional. Smith also discusses theoretical concepts as they relate to practical applications. Many of the techniques Smith details in this book have been previously unpublished, and have been proven to solve problems in hours rather than in the days or weeks of effort it would take conventional techniques to yield results. Comprehensive and informative, this volume provides detailed coverage of such areas as: scope probe impedance, grounding, and effective bandwidth, differential measurement techniques, noise source location and identification, current probe characteristics, operation, and applications, characteristics of sources of interference to measurements and the minimization of their effects, minimizing coupling of external noise into the equipment under test by measurements, estimating the effect of a measurement on equipment operation, using digital scopes for single shot noise measurements, prediction of equipment electromagnetic interference (EMI) emission and susceptibility of performance, null experiments for validating measurement data, the relationship between high frequency noise and final product reliability. With governmental regulations and MIL standards now governing the emission of high frequency electronic noise and the susceptibility to pulsed EMI, the information presented in this guide is extremely pertinent. Electrical engineers will find High Frequency Measurements and Noise in Electronic Circuits an essential desktop reference for information and solutions, and engineering students will rely on it as a virtual source book for deciphering the "mysteries" unique to high frequency electronic circuits.
