Download or read book High rate Characterization of 304L Stainless Steel at Elevated Temperatures written by and published by . This book was released on 2011 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Split Hopkinson Kolsky Bar written by Weinong W. Chen and published by Springer Science & Business Media. This book was released on 2010-11-11 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors systematically describe the general principles of Kolsky bars, or split Hopkinson bars, which are widely used for obtaining dynamic material properties. Modifications are introduced for obtaining reliable data. Specific experiment design guidelines are provided to subject the specimen to desired testing conditions. Detailed Kolsky-bar examples are given for different classes of materials (brittle, ductile, soft, etc) and for different loading conditions (tension, torsion, triaxial, high/low temperatures, intermediate strain rate, etc). The Kolsky bars used for dynamic structural characterization are briefly introduced. A collection of dynamic properties of various materials under various testing conditions is included which may serve as a reference database. This book assists both beginners and experienced professionals in characterizing high-rate material response with high quality and consistency. Readers who may benefit from this work include university students, instructors, R & D professionals, and scholars/engineers in solid mechanics, aerospace, civil and mechanical engineering, as well as materials science and engineering.
Download or read book Characterization of the Deformation and Annealing of 304L Stainless Steel Final Report written by and published by . This book was released on 1994 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stainless steel, type 304L, was deformed at room temperature using the two processes of semi-piercing and cold-rolling and then annealed at various temperatures and times. The three metallurgical areas of work hardening, age hardening, and anneal softening were observed and characterized using metallography techniques of macrohardness, optical and transmission electron microscopy, and X-ray diffraction.
Download or read book Advances in Experimental Impact Mechanics written by Bo Song and published by Elsevier. This book was released on 2021-08-25 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizing the latest advances in experimental impact mechanics, this book provides cutting-edge techniques and methods for designing, executing, analyzing, and interpreting the results of experiments involving the dynamic responses of materials and structures. It provides tailored guidelines and solutions for specific applications and materials, covering topics such as dynamic characterization of metallic materials, fiber-like materials, low-impedance materials, concrete and more. Damage evolution and constitutive behavior of materials under impact loading, one-dimensional strain loading, intermediate and high strain rates, and other environmental conditions are discussed, as are techniques using high temperature testing and miniature Kolsky bars. Provides cutting-edge techniques and methods for designing, executing, analyzing, and interpreting the results of experimental impact mechanics Covers experimental guidelines and solutions for an array of different materials, conditions, and applications Enables readers to quickly design and perform their own experiments and properly interpret the results Looks at application-specific post-test analysis
Download or read book Characterization of 304L Stainless Steel by Means of Minimum Input Energy on the Selective Laser Melting Platform written by Ben Brown and published by . This book was released on 2014 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Developing parameter sets for new materials on the Selective Laser Melting (SLM) platform has traditionally been done through the use of single line processing windows and a basic design of experiments (DOE) which would include varying machine parameters to maximize density. This study expands the traditional method by determining the main effects statistically for density, allowing for a more in depth analysis wherein the experimental results are statistically correlated to the variable machine parameters used. With this analysis, parameter optimization with respect to achieving near full density, while also considering build rates, can be performed. New parameters for 304L stainless steel were developed using this method on a Renishaw AM250. Single line processing windows were used to determine bounds on machine parameters. Utilizing this information, a DOE was implemented in which density samples were fabricated and the statistical main effects on density were derived. Several methods for density determination were also investigated as part of this study. In order to quantify machine parameters, a novel energy density term was formulated. Optimal parameter sets were found and energy density was reduced to increase build rate. Sensitivity of mechanical properties to the reduction was shown to be minimal over the range tested. Finally, the effect of decreased energy density on microstructure, part density, mechanical properties, and orientation sensitivity were then measured"--Abstract, page iii.
Download or read book Impact written by Werner Goldsmith and published by Courier Corporation. This book was released on 2001-11-01 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carefully organized, skillfully written text examines stereomechanical impact; vibrational aspects of impact; contact phenomena produced by the impact of elastic bodies; dynamic processes involving plastic strains; results of impact experiments and dynamic properties of materials. Well-illustrated treatment presumes some knowledge of partial differential equations, operational calculus, and elasticity. 284 illustrations.
Download or read book Dynamic High Temperature Characterization of 304L Strainless Steel for Recrystallization Investigation written by and published by . This book was released on 2015 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1975 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Impact Testing of Stainless Steel Material at Room and Elevated Temperatures written by and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Stainless steels are used for the construction of numerous spent nuclear fuel or radioactive material containers that may be subjected to high strains and moderate strain rates during accidental drop events. Mechanical characteristics of these base materials and their welds under dynamic loads in the strain rate range of concern are not well documented. However, three previous papers [1, 2, 3] reported on impact testing and analysis results performed at the Idaho National Laboratory using 304/304L and 316/316L stainless steel base material specimens that began the investigation of these characteristics. The goal of the work presented herein is to add the results of additional tensile impact testing for 304/304L and 316/316L stainless steel material specimens. Utilizing a drop-weight impact test machine and 1/4-inch to 1/2-inch thick dog-bone shaped test specimens, additional tests achieved target strain rates of 5, 10, and 22 per second at room temperature, 300, and 600 degrees Fahrenheit. Elevated true stress-strain curves for these materials at each designated strain rate and temperature are presented herein.
Download or read book Characterization of the Deformation and Annealing of 304L Stainless Steel written by William H. Smith and published by . This book was released on 1993 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Case Histories in Failure Analysis Volume 1 written by Khlefa Alarbe Esaklul and published by ASM International. This book was released on 1992-01-01 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains 115 never-before published failure analysis case studies contributed by experts from around the world. Contents: Aircraft, Electrical Equipment Fasteners, Ground Transportation, High Temperature, Miscellaneous, Non-Metallic Materials, Process Equipment, Rotating Equipment, Structures. Learn how others have solved failures in various industries such as automotive, aerospace, utilities, oil and gas, petrochemical, biomedical, ground transportation, off-highway vehicles, and more.
Download or read book ERDA Energy Research Abstracts written by United States. Energy Research and Development Administration and published by . This book was released on 1977 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1992 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization of the Deformation and Annealing of 304L Stainless Steel written by and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1989 with total page 1518 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Probabilistic Safety Analysis for Solidified High level Nuclear Waste Management Systems written by Richard A. Heckman and published by . This book was released on 1979 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
