Download or read book Electronic Transitions and the High Pressure Chemistry and Physics of Solids written by H.G. Drickamer and published by Springer Science & Business Media. This book was released on 2013-03-13 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is no paucity of books on high pressure. Beginning with P. W. Bridgman's The Physics of High Pressure, books of general interest include the two-volume Physics and Chemistry of High Pressure, edited by R. S. Bradley, and the series, Advances in High Pressure Research, as well as the report on the Lake George Conference in 1960. Solid state physics is well represented by Solids Under Pressure, edited by Paul and Warschauer, by Physics of Solids at High Pressure, edited by Tomizuka and Emrick, and by Properties Physiques des Solides sous Pression, edited by Bloch, as well as by chapters in Volumes 6, 13, 17, and 19 of Solid State Physics, edited by Seitz, Turnbull, and Ehrenreich. Chemistry in gases and liquids is covered in Weale's Chemical Reactions at High Pressure, and Hamann's Physico-chemical Effects of Pressure. In addition to the coverage of techniques and calibrations in the above volumes, Modern Very High Pressure Techniques, edited by Wentorf, High Pressure Methods in Solid State Research, by C. C. Bradley, The Accurate Characterization of the High Pressure Environment, edited by E. C. Lloyd, and a chapter in Volume 11 of Solid State Physics are devoted entirely to this facet of high pressure research. It is not our plan either to supersede or extend these approaches. It is our purpose here to discuss the effect of high pressure on the electronic properties of solids.
Download or read book High Pressure Physics and Chemistry written by Rupert Stevenson Bradley and published by . This book was released on 1963 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solids Under High Pressure Shock Compression written by R.A. Graham and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1950s shock compression research contributed greatly to scientific knowledge and industrial technology. As a result, for example, our understanding of meteorite impacts has substantially improved, and shock processes have become standard industrial methods in materials synthesis and processing. Investigations of shock-compressed matter involve physics,electrical engineering, solid mechanics, metallurgy, geophysics and materials science. The description of shock-compressed matter presented here, which is derived from physical and chemical observations, differs significantly from the classical descriptions derived from strictly mechanical characteristics. This volume, with over 900 references, provides an introduction for scientists and engineers interested in the present state of shock compression science.
Download or read book High Pressure Food Science Bioscience and Chemistry written by N S Isaacs and published by Elsevier. This book was released on 1998-01-01 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of high pressures to serve scientific ends is an ever-growing area of research. With sections on chemistry, food science, biochemistry and physics, this book contains a variety of original work.
Download or read book An Introduction to High Pressure Science and Technology written by Jose Manuel Recio and published by CRC Press. This book was released on 2016-01-05 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to High-Pressure Science and Technology provides you with an understanding of the connections between the different areas involved in the multidisciplinary science of high pressure. The book reflects the deep interdisciplinary nature of the field and its close relationship with industrial applications.Thirty-nine specialists in high
Download or read book High Pressure Physics written by John Loveday and published by CRC Press. This book was released on 2012-06-06 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-pressure science has undergone a revolution in the last 15 years. The development of intense new x-ray and neutron sources, improved detectors, new instrumentation, greatly increased computation power, and advanced computational algorithms have enabled researchers to determine the behavior of matter at static pressures in excess of 400 GPa. Shock-wave techniques have allowed access to the experimental pressure-temperature range beyond 1 TPa and 10,000 K. High-Pressure Physics introduces the current state of the art in this field. Based on lectures presented by leading researchers at the 63rd Scottish Universities Summer School in Physics, the book summarizes the latest experimental and theoretical techniques. Highlighting applications in a range of physics disciplines—from novel materials synthesis to planetary interiors—this book cuts across many areas and supplies a solid grounding in high-pressure physics. Chapters cover a wide array of topics and techniques, including: High-pressure devices The design of pressure cells Electrical transport experiments The fabrication process for customizing diamond anvils Equations of state (EOS) for solids in a range of pressures and temperatures Crystallography, optical spectroscopy, and inelastic x-ray scattering (IXS) techniques Magnetism in solids The internal structure of Earth and other planets Measurement and control of temperature in high-pressure experiments Solid state chemistry and materials research at high pressure Liquids and glasses The study of hydrogen at high density A resource for graduate students and young researchers, this accessible reference provides an overview of key research areas and applications in high-pressure physics.
Download or read book High Pressure Chemistry and Physics of Polymers written by A.L. Kovarskii and published by CRC Press. This book was released on 1994-02-03 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Pressure Chemistry and Physics of Polymers is devoted to covering all areas of high-pressure polymer materials science. Topics addressed include the synthesis of polymers, changes in reactivity, structural transformations, molecular dynamics, relaxation processes, deformational properties, chemical modification, and the effect of shock waves and shear stresses. The authors' contributions reflect over 60 years of Soviet study in the field of physico-chemistry conducted at the major former Soviet Institutes of Chemical Physics, Organic Chemistry, Polymer Chemistry, and Physical Chemistry. Fundamental topics such as compressibility of polymers, polymerization under pressure, viscoelastic/deformational properties, and polymer modification are discussed with an eye toward materials development for improving physical models and methods of calculating the changing parameters of materials under pressure. The book is a valuable reference to data on mechanisms of physical and chemical processes, in addition to new experimental data for improving physical models and methods of calculating changes in material characteristics under compression loads. High-Pressure Chemistry and Physics of Polymers will be an important reference for graduate students and practicing professionals in polymer chemistry and polymeric materials.
Download or read book Ultrahigh pressure Mineralogy written by Russell Julian Hemley and published by de Gruyter. This book was released on 1998 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 37 of Reviews in Mineralogy moves from the complexity of rocks to their mineral components and finally to fundamental properties arising directly from the play of electrons and nuclei. This volume was prepared for a short course by the same t
Download or read book Aqueous Systems at Elevated Temperatures and Pressures written by Roberto Fernandez-Prini and published by Elsevier. This book was released on 2004-07-06 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Association for the Properties of Water and Steam (IAPWS) has produced this book in order to provide an accessible, up-to-date overview of important aspects of the physical chemistry of aqueous systems at high temperatures and pressures. These systems are central to many areas of scientific study and industrial application, including electric power generation, industrial steam systems, hydrothermal processing of materials, geochemistry, and environmental applications. The authors' goal is to present the material at a level that serves both the graduate student seeking to learn the state of the art, and also the industrial engineer or chemist seeking to develop additional expertise or to find the data needed to solve a specific problem. The wide range of people for whom this topic is important provides a challenge. Advanced work in this area is distributed among physical chemists, chemical engineers, geochemists, and other specialists, who may not be aware of parallel work by those outside their own specialty. The particular aspects of high-temperature aqueous physical chemistry of interest to one industry may be irrelevant to another; yet another industry might need the same basic information but in a very different form. To serve all these constituencies, the book includes several chapters that cover the foundational thermophysical properties (such as gas solubility, phase behavior, thermodynamic properties of solutes, and transport properties) that are of interest across numerous applications. The presentation of these topics is intended to be accessible to readers from a variety of backgrounds. Other chapters address fundamental areas of more specialized interest, such as critical phenomena and molecular-level solution structure. Several chapters are more application-oriented, addressing areas such as power-cycle chemistry and hydrothermal synthesis. As befits the variety of interests addressed, some chapters provide more theoretical guidance while others, such as those on acid/base equilibria and the solubilities of metal oxides and hydroxides, emphasize experimental techniques and data analysis.- Covers both the theory and applications of all Hydrothermal solutions - Provides an accessible, up-to-date overview of important aspects of the physical chemistry of aqueous systems at high temperatures and pressures- The presentation of the book is understandable to readers from a variety of backgrounds
Download or read book High Pressure Organic Synthesis written by Davor Margetic and published by de Gruyter. This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: High pressure chemistry is a widely used methodology in organic synthesis which helps to increase the rate and to improve the efficiency of chemical processes. The current publication outlines the impact of pressure on many types of chemical reactions important from synthetic point of view and gives practical considerations how to plan and perform synthetic experiments under high pressure in the lab.
Download or read book High Pressure Process Technology Fundamentals and Applications written by A. Bertucco and published by Elsevier. This book was released on 2001-10-15 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clear evidence of increasing demands in the processing industry prompted the editors and authors to publish a new book about High Pressure Process Technology: Fundamentals and Applications.This book presents the latest knowledge regarding the high pressure processing aspects combined with that about the modeling, the design and the operation of safe and reliable high pressure plants and equipment. This treatment and selection of the subjects is stimulating and unique. Consisting of nine chapters, each subdivided into several sections, the book addresses the high pressure aspects, providing well selected correlated information connected with a comprehensive overview together with a large number of references. The main body of the first eight chapters refers to subjects like high pressure in general, the thermodynamics and kinetics of the fluids involved, the design of high pressure equipment, the modeling and design of reactors, separation and fractionation units, the safety aspects, the control and economics.In the extended last chapter, examples of promising high pressure applications are explained, such as chemical and enzymatic reactions in supercritical solvents, hydrogenation under supercritical conditions, supercritical water oxidation, polymerization with metallocene catalysts, supercritical extraction, fractionation and precipitation, supercritical pharma processing, ultra-high pressure sterilization and supercritical dry-cleaning.
Download or read book Phase Transformations of Elements Under High Pressure written by E. Yu Tonkov and published by CRC Press. This book was released on 2018-10-08 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: As laboratories replace heavy hydraulic presses and bulky high-pressure chambers with miniature diamond anvils, traditional heaters with laser heating, and continue to improve methods of shock compression, there has been considerable new data obtained from the high-pressure, high-temperature modification of pure elements. The dense metallic modification of elements shows the potential for achieving superconductivity akin to theoretical predictions. Phase Transformations of Elements Under High Pressure contains the latest theoretical and experimental information on nearly 100 elements, including first-and second-phase transitions, melting lines, crystal structures of stable and metastable phases, stability of polymorphic modifications, and other useful properties and data. It emphasizes features such as changes in the liquid state, amorphization, and metallization, and provides temperature-pressure diagrams for every element. The book also describes the transitions of polymeric forms of fullerene, crystal modifications of elements stable under high pressures, and provides data that confirms their superconducting and magnetic properties. This handbook will be a lasting reference for scientists in a broad range of disciplines, including solid-state physics, chemistry, crystallography, mineralogy, and materials science.
Download or read book High Pressure in Semiconductor Physics II written by and published by Academic Press. This book was released on 1998-08-06 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its inception in 1966, the series of numbered volumes known as Semiconductors and Semimetals has distinguished itself through the careful selection of well-known authors, editors, and contributors. The "Willardson and Beer" Series, as it is widely known, has succeeded in publishing numerous landmark volumes and chapters. Not only did many of these volumes make an impact at the time of their publication, but they continue to be well-cited years after their original release. Recently, Professor Eicke R. Weber of the University of California at Berkeley joined as a co-editor of the series. Professor Weber, a well-known expert in the field of semiconductor materials, will further contribute to continuing the series' tradition of publishing timely, highly relevant, and long-impacting volumes. Some of the recent volumes, such as Hydrogen in Semiconductors, Imperfections in III/V Materials, Epitaxial Microstructures, High-Speed Heterostructure Devices, Oxygen in Silicon, and others promise indeed that this tradition will be maintained and even expanded. Reflecting the truly interdisciplinary nature of the field that the series covers, the volumes in Semiconductors and Semimetals have been and will continue to be of great interest to physicists, chemists, materials scientists, and device engineers in modern industry. Volumes 54 and 55 present contributions by leading researchers in the field of high pressure semiconductors. Edited by T. Suski and W. Paul, these volumes continue the tradition of well-known but outdated publications such as Brigman's The Physics of High Pressure (1931 and 1949) and High Pressure Physics and Chemistry edited by Bradley. Volumes 54 and 55 reflect the industrially important recent developments in research and applications of semiconductor properties and behavior under desirable risk-free conditions at high pressures. These developments include the advent of the diamond anvil cell technique and the availability of commercial piston–cylinder apparatus operating at high hydrostatic pressures. These much-needed books will be useful to both researchers and practitioners in applied physics, materials science, and engineering.
Download or read book Synchrotron Radiation Applications written by Xinyi Zhang and published by . This book was released on 2018 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The book contains the latest synchrotron-based techniques and research results. All contributors are specialists or leading scientists in their fields. The book includes new techniques and methods that will potentially get wider applications in various disciplines"--
Download or read book High Pressure Crystallography written by Andrzej Katrusiak and published by Springer Science & Business Media. This book was released on 2004-03-31 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the tremendous advances in the techniques and equipment for carrying out high-pressure crystallography, the application or exploration of the high-pressure variable in detailed structural studies remains rare. The chapters in this book provide a set of lecture notes and supplementary material for a course on high pressure crystallography. The material comprises state-of-the-art reviews of high-pressure experiments using X-ray and neutron diffraction techniques at synchrotron and neutron facilities and in the laboratory, as well as complementary experimental high-pressure techniques and theoretical methods for investigating matter at elevated pressures. The materials studies range from elemental solids and liquids to inorganic compounds, minerals, organic compounds, clathrates and pharmaceutical compounds, to large biological molecules such as proteins and viruses. The book provides a reference for workers in high-pressure science wishing to learn more about crystallography and for established crystallographers potentially interested in high pressure as a variable, as well as an introductory guide to new researchers in the field.
Download or read book Techniques in High Pressure Neutron Scattering written by Stefan Klotz and published by CRC Press. This book was released on 2012-12-04 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing on the author's practical work from the last 20 years, Techniques in High Pressure Neutron Scattering is one of the first books to gather recent methods that allow neutron scattering well beyond 10 GPa. The author shows how neutron scattering has to be adapted to the pressure range and type of measurement.Suitable for both newcomers and exp
Download or read book Effects of Explosions on Materials written by Stepan S. Batsanov and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the 1950s explosives began to be used to generate ultrahigh pressures in condensed substances in order to modify their properties and structure. Notwithstanding the short duration of an explosion, its energy proved to be high enough to perform physical-chemical transformations of substances, and the new method gained wide industrial applications. It has both advan tages and drawbacks in comparison with the traditional method of static compression. The latter method, notorious for its cumbersome and expensive machin ery, allows one to maintain high pressure as long as one pleases and to regu late the temperature of the sample arbitrarily. But, the pressure available is rather limited and for any increase of this limit one has to pay by the progres sive shrinking of the working volume of a press. The dynamic method has the advantages of low cost and practically no restrictions of magnitude of pressure and the size of a processed sample, but the temperature in a compressed body is no longer controlled by an experi mentor. Rather, it is firmly dictated by the level of loading, according to the equation of state. Hence, it is difficult to recover metastable products and impossible to prepare solids with a low concentration of defects as the dura tion of explosion is too short for their elimination.
