Download or read book High Performance Fillers 2007 written by and published by iSmithers Rapra Publishing. This book was released on 2007 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance Fillers 2005 written by and published by iSmithers Rapra Publishing. This book was released on 2005 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fillers are playing an increasingly important role in polymer applications, a trend that will increase with the rise in the cost of oil and hence polymer feedstocks. Increasingly though, fillers are seen as high performance additives, not just cost lowering diluents, and this is the focus of the conference, which has papers from both users and producers of performance enhancing fillers. Prominent among the topics covered are important growth areas such as; nanofillers, fire retardant fillers and natural fibre based composites. Papers dealing with the latest developments in additives to control the crucial area of filler to polymer adhesion are also featured prominently.
Download or read book High Performance Fillers 2006 written by Rapra Technology and published by iSmithers Rapra Publishing. This book was released on 2006 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second international conference focused on developments in High Performance Fillers from established materials to the latest innovations. There were presentations on many different types of fillers from flash calcined clays (Imerys), diatomaceous earths and perlites (World Minerals), aluminas (Sasol), natural fibres (Queens's University Belfast), titanium oxides (Oxonica), mica (Quartzwerke), wollastonite (RT Vanderbilt), pigments (Eckhart) and glass foam (Trovotech) to nanographite (State University of Michigan), POSS (Hybrid Plastics) and nanocomposites (Prof Camino, Prof Kenig, S Dunger). BASF AG and Electrolux discussed filler interactions with other compounding ingredients, whilst surface modification with silanes was presented by Dow Corning.
Download or read book Elastomer Based Composite Materials written by Nikolay Dishovsky and published by CRC Press. This book was released on 2018-05-15 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elastomer-Based Composite Materials: Mechanical, Dynamic, and Microwave Properties and Engineering Applications is focused on elastomer-based composite materials comprising different types of reinforcing fillers. The book provides an informative examination of the possibilities for broadening the engineering applications of elastomer composites through using various types of hybrid fillers, ferrites, and ceramics, and also examines their synthesis and characterization. It discusses new hybrid fillers that have been synthesized by different techniques, e.g. impregnation of different substrates (carbon black, conductive carbon black, activated carbons, etc.) with silica or magnetite. These new fillers have been thoroughly characterized by standard techniques and by up-to-date methods, such as energy dispersive X-ray spectroscopy in scanning transmission electron microscopy (STEM-EDX), atomic absorption spectroscopy (AAS), and inductively coupled plasma–optical emission spectroscopy (ICP-OES). The effect of those fillers upon the curing properties, mechanical and dynamic parameters, electrical conductivity, and dielectric and microwave characteristics of elastomer-based composites is discussed in detail in this volume. The book also covers the influence of various types of ceramics (SiC, B4C, and TiB2) and barium and strontium hexaferrites upon the aforementioned properties of rubber composites in conjunction with a view toward solutions for environmental problems caused by waste tires. The book shows that pyrolysis-cum-water vapor is a suitable and environmentally friendly method for the conversion of the waste green tires into useful carbon-silica hybrid fillers. The properties of elastomer-based composites comprising different types of nanostructures (fullerenes, carbon nanotubes, graphene nanoplatelets), modified activated carbons, and calcined kaolin are also discussed. Special attention is paid to composites with lower levels of zinc oxide. The volume provides an abundance of knowledge on the detailed characterization of these fillers and on the curing, mechanical, dynamic mechanical, and dielectric and microwave properties of the elastomeric composites. The book surveys the most recent research activities of the authors, which will make it a vital reference source for scientists in both the academic and industrial sectors, as well as for individuals who are interested in rubber materials. It will be very useful for students, especially PhD students, scientists, lecturers, and engineers working or doing research in the field of polymer materials science, elastomer-based composites and nanocomposites and their engineering applications in the production of microwave absorbers and electromagnetic waves shielding materials, materials for electronics devices and telecommunications.
Download or read book Handbook of Industrial Polyethylene and Technology written by Mark A. Spalding and published by John Wiley & Sons. This book was released on 2017-10-12 with total page 1382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides an exhaustive description of polyethylene. The 50+ chapters are written by some of the most experienced and prominent authors in the field, providing a truly unique view of polyethylene. The book starts with a historical discussion on how low density polyethylene was discovered and how it provided unique opportunities in the early days. New catalysts are presented and show how they created an expansion in available products including linear low density polyethylene, high density polyethylene, copolymers, and polyethylene produced from metallocene catalysts. With these different catalysts systems a wide range of structures are possible with an equally wide range of physical properties. Numerous types of additives are presented that include additives for the protection of the resin from the environment and processing, fillers, processing aids, anti-fogging agents, pigments, and flame retardants. Common processing methods including extrusion, blown film, cast film, injection molding, and thermoforming are presented along with some of the more specialized processing techniques such as rotational molding, fiber processing, pipe extrusion, reactive extrusion, wire and cable, and foaming processes. The business of polyethylene including markets, world capacity, and future prospects are detailed. This handbook provides the most current and complete technology assessments and business practices for polyethylene resins.
Download or read book Fillers for Polymer Applications written by Roger Rothon and published by Springer. This book was released on 2017-03-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides an introduction to and reference information about the science behind the production and use of particulate fillers in polymer applications. Fillers play an important role and are used with practically all types of polymers: thermoplastics, thermosets, elastomers.Readers will find an introduction to the topic of particulate fillers for polymer applications and their importance. The first chapters describe the use and characteristics of fillers in different polymer types, such as thermoplastics, thermosets and elastomers. The following chapters compile and summarize comprehensive information about different filler materials which find application nowadays, including mineral fillers (for example feldspars, wollastonites, and many more) and inorganic fillers (barium sulphate, or clays), bio-fillers, recycled and sustainable fillers, and fillers for specific applications (for example flame-retardant fillers, fillers for electrically conductive applications, or thermally conductive additives).Offering key information, compiled by a mixed team of authors from academia and industry, this handbook will appeal to researchers and professionals working on and with particulate polymer fillers alike.
Download or read book Polypropylene Handbook written by József Karger-Kocsis and published by Springer. This book was released on 2019-03-18 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book extensively reviews Polypropylene (PP), the second most widely produced thermoplastic material, having been produced for over 60 years. Its synthesis, processing and application are still accompanied by vigorous R&D developments because the properties of PP are at the borderline between those of commodity and engineering thermoplastics. Readers are introduced to various tacticities and polymorphs of PP, and their effects on structural properties. Further, the book addresses the control of optical properties using nucleants, provides strategies for overcoming the limited cold/impact resistance of PP, examines in detail the effects of recycling, and presents guidelines for the property modification of PPs through foaming, filling and reinforcing with respect to target applications. Special attention is paid to descriptions and models of properties as a function of morphological variables. Last but not least, the book suggests potential practical applications of PP-based systems, especially in the packaging, appliances, building/construction, textile and automotive sectors. Each chapter, written by internationally respected scientists, reflects the current state-of-art in the respective field and offers a vital source of information for students, researchers and engineers interested in the morphology, properties, testing and modeling of PP and PP-based systems. The content is indispensable to the appropriate application of PPs and related composites.
Download or read book Natural Rubber Materials written by Sabu Thomas and published by Royal Society of Chemistry. This book was released on 2013-12-05 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive two volume set covering the synthesis, characterization and applications of natural rubber based blends, interpenetrating polymer networks, composites and nanocomposites.
Download or read book Advances in Nanocomposites written by Boreddy Reddy and published by BoD – Books on Demand. This book was released on 2011-04-19 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Nanocomposites - Synthesis, Characterization and Industrial Applications was conceived as a comprehensive reference volume on various aspects of functional nanocomposites for engineering technologies. The term functional nanocomposites signifies a wide area of polymer/material science and engineering, involving the design, synthesis and study of nanocomposites of increasing structural sophistication and complexity useful for a wide range of chemical, physicochemical and biological/biomedical processes. "Emerging technologies" are also broadly understood to include new technological developments, beginning at the forefront of conventional industrial practices and extending into anticipated and speculative industries of the future. The scope of the present book on nanocomposites and applications extends far beyond emerging technologies. This book presents 40 chapters organized in four parts systematically providing a wealth of new ideas in design, synthesis and study of sophisticated nanocomposite structures.
Download or read book Sustainable Fillers Plasticizers for Polymer Composites written by Indran Suyambulingam and published by Elsevier. This book was released on 2024-11-13 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Fillers/Plasticizers for Polymer Composites: Promising Resources presents a comprehensive review on the application and use of bio-fillers and bio-plasticizers for the fabrication of biopolymer-based composites. The book looks first at the historical aspects, and then goes on to discuss current trends and recent developments. Emphasis is placed on the future potential of these resources to expand their usage in a broad range of different applications. The book will be a valuable reference resource for both academic and industrial researchers working in materials science, polymer chemistry and engineering, and the manufacturing of polymer composite materials. - Covers recent developments in eco-friendly biofillers/ bioplasticizers and biopolymer-based composites - Explains the life cycle assessment of filler-based composites, the recycling process and utilization of industrial waste-based fillers, and other socioeconomic aspects - Provides a review of the processing techniques for filler-based composites and their effect on the properties of polymer composites - Discusses the market scenario and future challenges and opportunities for these materials
Download or read book Advanced Materials Engineering and Technology II written by Mohd Mustafa Al Bakri Abdullah and published by Trans Tech Publications Ltd. This book was released on 2013-12-05 with total page 1158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2013 International Conference on Advanced Materials Engineering and Technology (ICAMET 2013), November 28-29, 2013, Bandung, Indonesia
Download or read book Membrane Technologies for Biorefining written by Alberto Figoli and published by Woodhead Publishing. This book was released on 2016-02-19 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membrane Technologies for Biorefining highlights the best practices needed for the efficient and environmentally-compatible separation techniques that are fundamental to the conversion of biomass to fuels and chemicals for use as alternatives to petroleum refining. Membrane technologies are increasingly of interest in biorefineries due to their modest energy consumption, low chemical requirements, and excellent separation efficiency. The book provides researchers in academia and industry with an authoritative overview of the different types of membranes and highlights the ways in which they can be applied in biorefineries for the production of chemicals and biofuels. Topics have been selected to highlight both the variety of raw materials treated in biorefineries and the range of biofuel and chemical end-products. - Presents the first book to focus specifically on membrane technologies in biorefineries - Provides a comprehensive overview of the different types of membranes and highlight ways in which they can be applied in biorefineries for the production of chemicals and biofuels - Topics selected highlight both the variety of raw materials treated using membranes in biorefineries and the range of biofuel and chemical end-products
Download or read book Engineering of High Performance Textiles written by Menghe Miao and published by Woodhead Publishing. This book was released on 2017-09-07 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering of High-Performance Textiles discusses the fiber-to-fabric engineering of various textile products. Each chapter focuses on practical guidelines and approaches for common issues in textile research and development. The book discusses high-performance fibers and yarns before presenting the engineering fabrics and architectures needed for particular properties required of high-performance textiles. Properties covered include moisture absorption, pilling resistant knitwear, fire retardant fabrics, camouflage fabrics, insect repellent fabrics, filtration, and many more. Coordinated by two highly distinguished editors, this book is a practical resource for all those engaged in textile research, development and production, for both traditional and new-generation textile products, and for academics involved in research into textile science and technology. - Offers a range of perspectives on high-performance textiles from an international team of authors with diverse expertise in academic research, textile development and manufacture - Provides systematic and comprehensive coverage of the topic from fabric construction, through product development, to the range of current and potential applications that exploit high-performance textile technology - Led by two high-profile editors with many years' experience in engineering high-performance textiles
Download or read book Regional Conference on Science Technology and Social Sciences RCSTSS 2014 written by Nor Azizah Yacob and published by Springer. This book was released on 2016-03-24 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected science and technology papers that were presented at the 2014 Regional Conference of Sciences, Technology and Social Sciences (RCSTSS 2014). The bi-annual Conference is organized by Universiti Teknologi MARA Pahang, Malaysia. The papers address a broad range of topics including architecture, life sciences, robotics, sustainable development, engineering, food science and mathematics. The book serves as a platform for disseminating research findings, as a catalyst to inspire positive innovations in the development of the region. The carefully-reviewed papers in this volume present research by academicians of local, regional and global prominence. Out of more than 200 manuscripts presented at the conference by researchers from local and foreign universities and institutions of higher learning, 64 papers were chosen for inclusion in this publication. The papers are organized in more than a dozen broad categories, spanning the range of scientific research: • Engineering• Robotics• Mathematics & Statistics• Computer & Information Technology• Forestry• Plantation & Agrotechnology• Sports Science & Recreation• Health & Medicine• Biology• Physics• Food Science• Environment Science & Management• Sustainable Development• Architecture The book provides a significant point of reference for academics, researchers and students in many fields who need deeper research.
Download or read book Additives for Polyolefins written by Michael Tolinski and published by William Andrew. This book was released on 2015-03-17 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additives for Polyolefins is a unique quick-reference resource for those who create or use polyethylene and polypropylene compounds—the most commercially important family of plastic materials, making up close to half of the volume all plastics produced and used. These polymers would be useless without various additives. The book focuses on polyolefin additives that are currently important in the plastics industry, alongside new additives of increasing interest, such as nanofillers and environmentally sustainable materials. As much as possible, each chapter emphasises the performance of the additives in the polymer, and the value each relevant additive brings to polypropylene or polyethylene. Where possible, similar additives are compared by capability and relative cost. In this new edition, product tables have been updated with the most current product and company names, new case studies have been added, the role of nanofillers is discussed in greater detail, and the book concludes with a discussion on blending and handling additives, along with an entirely new chapter on how engineers can approach the issue of sustainability when choosing an additive. - Assesses capabilities and costs of a range of additives to enable engineers and scientists to make the correct selection for their property requirements - Provides concise, practical information about the purpose and use of specific additives, fillers, and reinforcements – demystifying the world of additives by providing clear, engineering explanations, and including real-world application case stories - Updated to include additional material on nanofillers, blending and handling, and sustainability
Download or read book Ultra High Performance Concrete written by Caijun Shi and published by CRC Press. This book was released on 2024-02-23 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra-high performance concrete (UHPC) is an advanced cement-based composite material with compressive strength of over 120 MPa, high toughness, and superior durability. Since its development in the early 1990s, UHPC has attracted great interest worldwide due to its advantages. This book covers material selection and mixture design methods for developing UHPC, as well as the performance of UHPC, including fresh and hardened properties, setting and hardening, dimensional stability, static and dynamic properties, durability, long-term properties, and self-healing properties. A range of potential applications and case studies are presented to illustrate how UHPC meets requirements for lightweight, high-rise, large-span, heavy-load bearing, fast-construction, and highly durable structures in civil and construction engineering. Also introduced is a typical new concrete, seawater sea-sand UHPC, which avoids the use of freshwater and river sand in marine construction. The first book to fully cover the design, performance, and applications of UHPC, this is ideal for concrete technologists, designers, contractors, and researchers.
Download or read book High Performance Apparel written by John McLoughlin and published by Woodhead Publishing. This book was released on 2017-09-18 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Performance Apparel: Materials, Development, and Applications covers the materials and techniques used in creating high-performance apparel, the technical aspects of developing high-performance garments, and an array of applications for high-performance clothing and wearable technology. Part One covers fabric construction for high-performance garments, from fiber types and spinning methods, to weaving, knitting, finishing, and joining techniques. Development of high-performance apparel is covered in Part Two, with particular emphasis on design and product development for function and wearer comfort. Part Three covers a range of applications and wearable technology that make use of high-performance apparel, including chapters on sportswear, protective clothing, and medical, military, and intelligent textiles. The book provides an excellent resource for all those engaged in garment development and production, and for academics engaged in research into apparel technology and textile science. - Offers a range of perspectives on high-performance apparel from an international team of authors with diverse expertise - Provides systematic and comprehensive coverage of the topic from fabric construction, through apparel design and development, to the range of current and potential applications - Presents an excellent resource for all those engaged in garment development and production, and for academics engaged in research
