Download or read book High Performance Fillers 2006 written by Rapra Technology and published by iSmithers Rapra Publishing. This book was released on 2006 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second international conference focused on developments in High Performance Fillers from established materials to the latest innovations. There were presentations on many different types of fillers from flash calcined clays (Imerys), diatomaceous earths and perlites (World Minerals), aluminas (Sasol), natural fibres (Queens's University Belfast), titanium oxides (Oxonica), mica (Quartzwerke), wollastonite (RT Vanderbilt), pigments (Eckhart) and glass foam (Trovotech) to nanographite (State University of Michigan), POSS (Hybrid Plastics) and nanocomposites (Prof Camino, Prof Kenig, S Dunger). BASF AG and Electrolux discussed filler interactions with other compounding ingredients, whilst surface modification with silanes was presented by Dow Corning.
Download or read book High Performance Fillers 2007 written by and published by iSmithers Rapra Publishing. This book was released on 2007 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance Fillers 2005 written by and published by iSmithers Rapra Publishing. This book was released on 2005 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fillers are playing an increasingly important role in polymer applications, a trend that will increase with the rise in the cost of oil and hence polymer feedstocks. Increasingly though, fillers are seen as high performance additives, not just cost lowering diluents, and this is the focus of the conference, which has papers from both users and producers of performance enhancing fillers. Prominent among the topics covered are important growth areas such as; nanofillers, fire retardant fillers and natural fibre based composites. Papers dealing with the latest developments in additives to control the crucial area of filler to polymer adhesion are also featured prominently.
Download or read book Elastomer Based Composite Materials written by Nikolay Dishovsky and published by CRC Press. This book was released on 2018-05-15 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elastomer-Based Composite Materials: Mechanical, Dynamic, and Microwave Properties and Engineering Applications is focused on elastomer-based composite materials comprising different types of reinforcing fillers. The book provides an informative examination of the possibilities for broadening the engineering applications of elastomer composites through using various types of hybrid fillers, ferrites, and ceramics, and also examines their synthesis and characterization. It discusses new hybrid fillers that have been synthesized by different techniques, e.g. impregnation of different substrates (carbon black, conductive carbon black, activated carbons, etc.) with silica or magnetite. These new fillers have been thoroughly characterized by standard techniques and by up-to-date methods, such as energy dispersive X-ray spectroscopy in scanning transmission electron microscopy (STEM-EDX), atomic absorption spectroscopy (AAS), and inductively coupled plasma–optical emission spectroscopy (ICP-OES). The effect of those fillers upon the curing properties, mechanical and dynamic parameters, electrical conductivity, and dielectric and microwave characteristics of elastomer-based composites is discussed in detail in this volume. The book also covers the influence of various types of ceramics (SiC, B4C, and TiB2) and barium and strontium hexaferrites upon the aforementioned properties of rubber composites in conjunction with a view toward solutions for environmental problems caused by waste tires. The book shows that pyrolysis-cum-water vapor is a suitable and environmentally friendly method for the conversion of the waste green tires into useful carbon-silica hybrid fillers. The properties of elastomer-based composites comprising different types of nanostructures (fullerenes, carbon nanotubes, graphene nanoplatelets), modified activated carbons, and calcined kaolin are also discussed. Special attention is paid to composites with lower levels of zinc oxide. The volume provides an abundance of knowledge on the detailed characterization of these fillers and on the curing, mechanical, dynamic mechanical, and dielectric and microwave properties of the elastomeric composites. The book surveys the most recent research activities of the authors, which will make it a vital reference source for scientists in both the academic and industrial sectors, as well as for individuals who are interested in rubber materials. It will be very useful for students, especially PhD students, scientists, lecturers, and engineers working or doing research in the field of polymer materials science, elastomer-based composites and nanocomposites and their engineering applications in the production of microwave absorbers and electromagnetic waves shielding materials, materials for electronics devices and telecommunications.
Download or read book The Non halogenated Flame Retardant Handbook written by Alexander B. Morgan and published by John Wiley & Sons. This book was released on 2014-04-07 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: A one-stop, practical handbook containing all of the current commercial non-halogenated flame retardant technologies as well as experimental systems near commercialization In response to the emphasis on replacing halogenated flame retardants with alternate technologies, this handbook focuses on existing non-halogenated flame retardants and the experimental close-to-production systems that are available today. The Non-Halogenated Flame Retardant Handbook starts with an overview of the regulations and customer perceptions driving non-halogenated flame retardant selections over older halogenated technologies. It then moves on to cover the known major classes of non-halogenated flame retardants, before concluding with the current niche-performing technologies and untried commercial contenders of the future. The Non-Halogenated Flame Retardant Handbook: Takes a practical approach to addressing the narrow subject of non-halogenated flame retardancy—placing more emphasis on flame retardant selection for specific plastics, practical considerations in flame retardant material design, and the various technologies’ strengths and limits Focuses on the proper use of non-halogenated flame retardants, rather than the mechanics of how they work Discusses important future trends in flame retardancy Features sections written by industrial and chemical experts who know how to apply the technology to polymers for fire safety needs
Download or read book Handbook of Fillers written by George Wypych and published by Elsevier. This book was released on 2016-02-11 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Fillers, Fourth Edition, discusses the rapidly advancing field of fillers, the substances added to plastics and composites that add value by improving and modifying the properties of materials and reducing costs. This new edition is an essential reference for engineers and scientists using fillers in a range of materials, including plastics, rubber, adhesives, and paper. The book is designed to be a comprehensive reference for both experienced practitioners and those new to fields where fillers are used. It covers available fillers and their properties, their effect on filled materials, such as mechanical properties, rheology, morphology, flammability, and recycling, and their use in practical applications. In particular, this new edition provides extensive coverage of nanofillers, along with the practical information needed to deploy these new technologies in the real world. The book includes the latest advances in filler technology, with consolidated technical information from over 4,000 research papers, data from over 160 filler and equipment manufacturers, and a thorough review of the patent literature. - Provides up-to-date, applicable information on the use of fillers in plastics, rubber, adhesives, and paper - Presents comprehensive coverage on the effect of fillers on materials, including their mechanical properties, their effects on material rheology, the morphology of the filled system, material durability, and more - Includes essential guidance on the industrial scale use of fillers and their transportation, storage, processing, equipment, quality control, and health and safety considerations
Download or read book Non halogenated Flame Retardant Handbook written by Alexander B. Morgan and published by John Wiley & Sons. This book was released on 2021-11-16 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: NON-HALOGENATED FLAME RETARDANT HANDBOOK The 2nd edition of the definitive single book of information, regulations, and how to use non-halogenated flame retardant technology. This book focuses on non-halogenated flame retardants with an emphasis on practical and applied issues, and builds upon the 1st edition, but is not just a re-do/re-edit of 1st/sup edition content. While non-halogenated flame retardants have not greatly changed since the 1st edition was published in 2014, there have been enough advances and changes to merit a 2nd edition. The book includes chapters on regulation and drivers for non-halogenated flame retardants, specific chapters on each of the major classes of flame retardants, as well as some newer technologies/niche non-halogenated solutions which are either starting to enter the market (coatings / bio-derived flame retardants) or are at least being studied with enough detail to bring to the attention of the reader. As with the 1st edition, the 2nd edition still takes a practical approach to addressing the narrow subject of non-halogenated flame retardancy. It includes more emphasis on flame retardant selection for specific plastics, practical considerations in flame retardant material design, and what the strengths and limits of these various technologies are. Previous flame retardant material science books have covered non-halogenated flame retardants, but they focus more on how they work rather than how to use them. This book focuses more on the practical uses, hence the title of the book “Handbook”, which should make it of good use to industrial chemists and material scientists. Audience The primary audience is material scientists, industrial chemists, fire safety engineers who have to meet flame retardant needs to sell products. It will also be useful to academics working to develop new flame retardant solutions.
Download or read book Epoxy Composites written by Debdatta Ratna and published by iSmithers Rapra Publishing. This book was released on 2007-08 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mixed Matrix Membranes written by Clara Casado-Coterillo and published by MDPI. This book was released on 2019-12-16 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixed matrix membranes (MMMs) have attracted a large amount of interest in research laboratories worldwide in recent decades, motivated by the gap between a growing interest in developing novel mixed matrix membranes by various research groups and the lack of large-scale implementation. This Special Issue contains six publications dealing with the current opportunities and challenges of mixed matrix membranes development and applications to solve environmental and health challenges of the society of 21st century.
Download or read book Performance Optimization Techniques in Analog Mixed Signal and Radio Frequency Circuit Design written by Fakhfakh, Mourad and published by IGI Global. This book was released on 2014-10-31 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improving the performance of existing technologies has always been a focal practice in the development of computational systems. However, as circuitry is becoming more complex, conventional techniques are becoming outdated and new research methodologies are being implemented by designers. Performance Optimization Techniques in Analog, Mix-Signal, and Radio-Frequency Circuit Design features recent advances in the engineering of integrated systems with prominence placed on methods for maximizing the functionality of these systems. This book emphasizes prospective trends in the field and is an essential reference source for researchers, practitioners, engineers, and technology designers interested in emerging research and techniques in the performance optimization of different circuit designs.
Download or read book High Performance Polymers and Engineering Plastics written by Vikas Mittal and published by John Wiley & Sons. This book was released on 2011-09-09 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes advances in synthesis, processing, and technology of environmentally friendly polymers generated from renewable resources. With contents based on a wide range of functional monomers and contributions from eminent researchers, this volume demonstrates the design, synthesis, properties and applications of plant oil based polymers, presenting an elaborate review of acid mediated polymerization techniques for the generation of green polymers. Chemical engineers are provided with state-of-the-art information that acts to further progress research in this direction.
Download or read book Application of Waste Materials in Lightweight Aggregates written by Franus Małgorzata and published by Taylor & Francis. This book was released on 2023-11-27 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Application of Waste Materials in Lightweight Aggregates presents the current state of knowledge on aggregates production methods, their characteristics, current standards and legal regulations. In addition, the book briefly discusses the issue of the presence of different types of waste in the environment (including municipal, agricultural, energy and mining industries), their characteristics and uses for the production of lightweight aggregates. This book serves as a source of academic information on the course and conditions of using various waste treatment processes for academics, engineers, professionals and students interested in environmental engineering, as well as for companies dealing with recycling and disposal of waste.
Download or read book Tyretech 2000 written by and published by iSmithers Rapra Publishing. This book was released on 2000-12-31 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Nanocomposites written by Boreddy Reddy and published by BoD – Books on Demand. This book was released on 2011-04-19 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Nanocomposites - Synthesis, Characterization and Industrial Applications was conceived as a comprehensive reference volume on various aspects of functional nanocomposites for engineering technologies. The term functional nanocomposites signifies a wide area of polymer/material science and engineering, involving the design, synthesis and study of nanocomposites of increasing structural sophistication and complexity useful for a wide range of chemical, physicochemical and biological/biomedical processes. "Emerging technologies" are also broadly understood to include new technological developments, beginning at the forefront of conventional industrial practices and extending into anticipated and speculative industries of the future. The scope of the present book on nanocomposites and applications extends far beyond emerging technologies. This book presents 40 chapters organized in four parts systematically providing a wealth of new ideas in design, synthesis and study of sophisticated nanocomposite structures.
Download or read book Handbook of Microbial Nanotechnology written by Chaudhery Mustansar Hussain and published by Academic Press. This book was released on 2022-03-13 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Microbial Nanotechnology is a collection of the most recent scientific advancements in the fundamental application of microbial nanotechnology across various sectors. This comprehensive handbook highlights the vast subject areas of microbial nanotechnology and its potential applications in food, pharmacology, water, environmental remediation, etc. This book will serve as an excellent reference handbook for researchers and students in the food sciences, materials sciences, biotechnology, microbiology and in the pharmaceutical fields.Microbial nanotechnology is taking part in creating development and innovation in various sectors. Despite the participation of microbial nanotechnology in modern development, there are some hindrances. The lack of information, the possibility of adverse impacts on the environment, human health, safety and sustainability are still a challenge. This handbook addresses these challenges. - Offers up-to-date, scientific information on the integration of microbiology and nanotechnology - Explores how nanotechnology can improve the detection of trace chemical contaminants, viruses and bacteria in food and other industry applications - Provides readers with a fundamental understanding of microbial nanotechnology and its challenges - Includes real-time applications with case studies to illustrate how microbial nanotechnology influences modern sciences and technologies
Download or read book Sustainability of Concrete written by Pierre-Claude Aitcin and published by CRC Press. This book was released on 2011-02-18 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production of Portland cement is responsible for about seven percent of the world's greenhouse gas emissions. The pressure to make the production of concrete more sustainable, or "greener", is considerable and increasing. This requires a wholesale shift in processes, materials and methods in the concrete industry. Pure Portland cement will nee
Download or read book Advanced Research in Nanosciences for Water Technology written by Ram Prasad and published by Springer. This book was released on 2019-02-04 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: The establishment of clean, safe water is one of the major challenges facing societies around the globe. The continued urbanization of human populations, the increasing manipulation of natural resources, and the resulting pollution are driving remarkable burden on water resources. Increasing demands for food, energy, and natural resources are expected to continue to accelerate in the near future in response to the demands of these changing human populations. In addition, the complexity of human activities is leading to a diversity of new chemical contaminants in the environment that represent a major concern for water managers. This will create increased pressure on both water quantity and quality, making it increasingly difficult to provide a sustainable supply of water for human welfare and activities. Although protection of water resources is the best long-term solution, we will also need innovative novel approaches and technologies to water treatment to ensure an adequate superior quality resource to meet these needs. Solving tomorrow’s water issues will require unique approaches that incorporate emerging new technologies. Great advances have been made in the area of nanotechnology. Due to their unique physical and chemical properties, nanomaterials are extensively used in antibacterial medical products, membrane filters, electronics, catalysts, and biosensors. Nanoparticles can have distinctly different properties from their bulk counterparts, creating the opportunity for new materials with a diversity of applications. Recent developments related to water treatment include the potential use of carbon nanotubes, nanocompositae, nanospheres, nanofibers, and nanowires for the removal of a diversity of chemical pollutants. By exploiting the assets and structure of these new materials, such as increased surface area, high reactivity, and photocatalytic action, it will be possible to create technologies that can be very efficient at removing and degrading environmental pollutants. Understanding and using these unique properties should lead to innovative, cost-effective applications for addressing the complexities of emerging needs for water treatment and protection. Although still in the early stages, research into the application of nanotechnology shows great promise for solving some of these major global water issues. This comprehensive text describes the latest research and application methods in this rapidly advancing field.
