Download or read book High Performance Carbon Based Optoelectronic Nanodevices written by Yanjie Su and published by Springer Nature. This book was released on 2021-09-15 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the photoelectric nanodevices based on carbon nanostructures, such as carbon nanotubes, graphene and related heterojunctions. The synthesis of carbon nanostructures and device fabrication are simply given. The interface charge transfer and the performance enhancement in the photodetectors and solar cells are comprehensively introduced. Importantly, carbon allotropes behave as high-mobility conductors or bandgap-tunable semiconductors depending on the atomic arrangements, the direct motivation is to fabricate all-carbon nanodevices using these carbon nanomaterials as building blocks. The photoelectric nanodevices based on all-carbon nanostructures have increasingly attracted attention in the future. The book offers a valuable reference guide to carbon-based photoelectric devices for researchers and graduate school students in the field. It will also benefit all researchers who investigate photoelectric nanodevices and photoelectric conversion with relevant frontier theories and concepts.
Download or read book Carbon Based Electronic Devices written by Alberto Tagliaferro and published by MDPI. This book was released on 2020-02-14 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than 50 years, silicon has dominated the electronics industry. However, this growth will come to an end, due to resources limitations. Thus, research developments need to focus to alternative materials, with higher performance and better functionality. Current research achievements have indicated that carbon is one of the promising candidates for its exploitation in the electronics industry. Whereas the physical properties of graphite and diamond have been investigated for many years, the potential for electronic applications of other allotropes of carbon (fullerenes, carbon nanotubes, carbon nanofibres, carbon films, carbon balls and beads, carbon fibers, etc), has only been appreciated relatively recently. Carbon-based materials offer a number of exciting possibilities for new applications of electronic devices, due to their unique thermal and electrical properties. However, the success of carbon-based electronics depends on the rapid progress of the fabrication, doping and manipulation techniques. In this Special Issue, we focus on both insights and advancements in carbon-based electronics. We will also cover various topics ranging from synthesis, functionalisation, and characterisation of carbon-based materials, for their use in electronic devices, including advanced manufacturing techniques, such as 3D printing, ink-jet printing, spray-gun technique, etc.
Download or read book Optoelectronic Nanodevices written by Minas M. Stylianakis and published by MDPI. This book was released on 2020-04-15 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last decade, novel graphene related materials (GRMs), perovskites, as well as metal oxides and other metal nanostructures have received the interest of the scientific community. Due to their extraordinary physical, optical, thermal, and electrical properties, which are correlated with their 2D ultrathin atomic layer structure, large interlayer distance, ease of functionalization, and bandgap tunability, these nanomaterials have been applied in the development or the improvement of innovative optoelectronic applications, as well as the expansion of theoretical studies and simulations in the fast-growing fields of energy (photovoltaics, energy storage, fuel cells, hydrogen storage, catalysis, etc.), electronics, photonics, spintronics, and sensing devices. The continuous nanostructure-based applications development has provided the ability to significantly improve existing products and to explore the design of materials and devices with novel functionalities. This book demonstrates some of the most recent trends and advances in the interdisciplinary field of optoelectronics. Most articles focus on light emitting diodes (LEDs) and solar cells (SCs), including organic, inorganic, and hybrid configurations, whereas the rest address photodetectors, transistors, and other well-known dynamic optoelectronic devices. In this context, this exceptional collection of articles is directed at a broad scientific audience of chemists, materials scientists, physicists, and engineers, with the goals of highlighting the potential of innovative optoelectronic applications incorporating nanostructures and inspiring their realization.
Download or read book Carbon Nanotubes written by Ann Rose Abraham and published by CRC Press. This book was released on 2022-10-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book discusses a selection of advanced topics on carbon nanotubes—their extraordinary properties, structure, design, fabrication, development, engineering, functionalization, carbon nanotube enabled nanocomposites, characterization, and, moreover, their utility in many applications. The volume highlights the amazing potential of advanced CNT composites in automotive, aeronautics, spacecrafts, transistors replacing Si electronics, energy, purification, hydrogen storage, tissue regeneration, electrochemical supercapacitors, sensing, biomedical applications, agriculture, energy, and technical applications. The book specifically discusses the applications of carbon nanotubes for a greener environment, as well as applications for biomedical uses, in drug delivery, and in display technology. It also explores the uses of CNTs in the energy and aerospace industries, such as for solar energy conversion, as a lubricant additive for enhancing energy efficiency, and more. Other chapters explore the potential of carbon nanotubes in hydrogen storage and carbon nanotube electronics.
Download or read book Electrical and Optoelectronic Properties of the Nanodevices Composed of Two Dimensional Materials written by Cheng-Hua Liu and published by Springer. This book was released on 2018-08-22 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis focuses on the transport and magneto-transport properties of graphene p-n-p junctions, such as the pronounced quantum Hall effect, a well-defined plateau–plateau transition point, and scaling behavior. In addition, it demonstrates persistent photoconductivity (PPC) in the monolayer MoS2 devices, an effect that can be attributed to random localized potential fluctuations in the devices. Further, it studies scaling behavior at zeroth Landau level and high performance of fractional values of quantum Hall plateaus in these graphene p-n-p devices. Moreover, it demonstrates a unique and efficient means of controlling the PPC effect in monolayer MoS2. This PPC effect may offer novel functionalities for MoS2-based optoelectronic applications in the future.
Download or read book Carbon Based Nano materials Research Development and Applications in Optoelectronics written by Feihu Wang and published by . This book was released on 2012 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book One Dimensional Nanostructures written by Tianyou Zhai and published by John Wiley & Sons. This book was released on 2012-10-19 with total page 857 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the latest research breakthroughs and applications Since the discovery of carbon nanotubes in 1991, one-dimensional nanostructures have been at the forefront of nanotechnology research, promising to provide the building blocks for a new generation of nanoscale electronic and optoelectronic devices. With contributions from 68 leading international experts, this book reviews both the underlying principles as well as the latest discoveries and applications in the field, presenting the state of the technology. Readers will find expert coverage of all major classes of one-dimensional nanostructures, including carbon nanotubes, semiconductor nanowires, organic molecule nanostructures, polymer nanofibers, peptide nanostructures, and supramolecular nanostructures. Moreover, the book offers unique insights into the future of one-dimensional nanostructures, with expert forecasts of new research breakthroughs and applications. One-Dimensional Nanostructures collects and analyzes a wealth of key research findings and applications, with detailed coverage of: Synthesis Properties Energy applications Photonics and optoelectronics applications Sensing, plasmonics, electronics, and biosciences applications Practical case studies demonstrate how the latest applications work. Tables throughout the book summarize key information, and diagrams enable readers to grasp complex concepts and designs. References at the end of each chapter serve as a gateway to the literature in the field. With its clear explanations of the underlying principles of one-dimensional nanostructures, this book is ideal for students, researchers, and academics in chemistry, physics, materials science, and engineering. Moreover, One-Dimensional Nanostructures will help readers advance their own investigations in order to develop the next generation of applications.
Download or read book Metal Oxides for Optoelectronics and Optics Based Medical Applications written by Suresh Sagadevan and published by Elsevier. This book was released on 2022-07-01 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides for Optoelectronics and Optics-based Medical Applications reviews recent advances in metal oxides and their mechanisms for optoelectronic, photoluminescent and medical applications. In addition, the book examines the integration of key chemistry concepts with nanoelectronics that can improve performance in a diverse range of applications. Sections place a strong emphasis on synthesis processes that can improve the metal oxides’ physical properties and the reflected surface chemical changes that can impact their performance in various devices like light-emitting diodes, luminescence materials, solar cells, etc. Finally, the book discusses the challenges associated with the handling and maintenance of metal oxides crystalline properties. This book will be suitable for academics and those working in R&D in industry looking to learn more about cheaper and more effective methods to produce metal oxides for use in the fields of electronics, photonics, biophotonics and engineering. Reviews the latest advances in the utilization of metal oxide materials in photonics, optoelectronics and optics-based medical applications Considers the most relevant synthesis strategies for the development of high-performing metal oxide-based devices Addresses a wide range of metal oxides including photonic crystals, fibers, metastructures, glasses, and more
Download or read book Nano Optoelectronic Sensors and Devices written by Ning Xi and published by William Andrew. This book was released on 2011-10-14 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanophotonics has emerged as a major technology and applications domain, exploiting the interaction of light-emitting and light-sensing nanostructured materials. These devices are lightweight, highly efficient, low on power consumption, and are cost effective to produce. The authors of this book have been involved in pioneering work in manufacturing photonic devices from carbon nanotube (CNT) nanowires and provide a series of practical guidelines for their design and manufacture, using processes such as nano-robotic manipulation and assembly methods. They also introduce the design and operational principles of opto-electrical sensing devices at the nano scale. Thermal annealing and packaging processes are also covered, as key elements in a scalable manufacturing process. Examples of applications of different nanowire based photonic devices are presented. These include applications in the fields of electronics (e.g. FET, CNT Schotty diode) and solar energy. Discusses opto-electronic nanomaterials, characterization and properties from an engineering perspective, enabling the commercialization of key emerging technologies Provides scalable techniques for nanowire structure growth, manipulation and assembly (i.e. synthesis) Explores key application areas such as sensing, electronics and solar energy
Download or read book Carbon based Nanomaterials in Analytical Chemistry written by Carlos D Garcia and published by Royal Society of Chemistry. This book was released on 2018-09-07 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the most relevant advances for employing carbon-based nanostructured materials for analytical purposes, this book serves as a reference manual that guides readers through the possibilities and helps when selecting the most appropriate material for targeted analytical applications. It critically discusses the role these nanomaterials can play in sample preparation, separation procedures and detection limit improvements whilst also considering the future trends in this field. Useful to direct initiatives, this book fills a gap in the literature for graduate students and professional researchers discussing the advantages and limitations across analytical chemistry in industry and academia.
Download or read book Nano Optoelectronic Sensors and Devices written by Ning Xi and published by William Andrew. This book was released on 2011-11-29 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanophotonics has emerged as a major technology and applications domain, exploiting the interaction of light-emitting and light-sensing nanostructured materials. These devices are lightweight, highly efficient, low on power consumption, and are cost effective to produce. The authors of this book have been involved in pioneering work in manufacturing photonic devices from carbon nanotube (CNT) nanowires and provide a series of practical guidelines for their design and manufacture, using processes such as nano-robotic manipulation and assembly methods. They also introduce the design and operational principles of opto-electrical sensing devices at the nano scale. Thermal annealing and packaging processes are also covered, as key elements in a scalable manufacturing process. Examples of applications of different nanowire based photonic devices are presented. These include applications in the fields of electronics (e.g. FET, CNT Schotty diode) and solar energy. Discusses opto-electronic nanomaterials, characterization and properties from an engineering perspective, enabling the commercialization of key emerging technologies Provides scalable techniques for nanowire structure growth, manipulation and assembly (i.e. synthesis) Explores key application areas such as sensing, electronics and solar energy
Download or read book Carbon Based Electronics written by Ashok Srivastava and published by CRC Press. This book was released on 2015-03-19 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discovery of one-dimensional material carbon nanotubes in 1991 by the Japanese physicist Dr. Sumio Iijima has resulted in voluminous research in the field of carbon nanotubes for numerous applications, including possible replacement of silicon used in the fabrication of CMOS chips. One interesting feature of carbon nanotubes is that these can be me
Download or read book Optoelectronic Properties of Carbon based Nanostructures written by Richard Rudolph Hartmann and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene has recently become the focus of enormous attention for experimentalists and theorists alike mainly due to its unique electronic properties. However, the limited way in which one can control these properties is a major obstacle for device applications. The unifying theme of thisthesis is to propose and thoroughly justify ways to control the electronic properties of graphene and carbon nanotubes by light or static electric and magnetic fields and to harness these properties for optoelectronic applications. A linearly polarized excitation is shown to create a strongly anisotropic distribution of photoexcited carriers in graphene, where the momenta of photoexcited carriers are aligned preferentially normal to the polarization plane. This effect offers an experimental tool to generate highly directional photoexcited carriers which could assist in the investigation of "direction-dependent phenomena" in graphene-based nanostructures. The depolarization of hot photoluminescence isused to study relaxation processes in graphene, both free standing and grown on silicon carbide. This analysis is extended to include the effect of a magnetic field, thereby allowing one to obtain the momentum relaxation times of hot electrons. The analysis of momentum alignment in the highfrequency regime shows that a linearly polarized excitation allows the spatial separation of carriers belonging to different valleys. Quasi-metallic carbon nanotubes are considered for terahertz applications. They are shown to emit terahertz radiation when a potential difference is applied across their ends and their spontaneous emission spectra have a universal frequency and bias voltage dependence. It is shown that the same intrinsic curvature which opens the gap in the quasi-metallic carbon nanotube energyspectrum also allows optical transitions in the terahertz range. The exciton binding energy in narrow-gap carbon nanotubes is calculated and found to scale with the band gap and vanishes as the gap decreases, even in the case of strong electron-hole attraction. Therefore, excitonic effectsshould not dominate in narrow-gap nanotubes. Contrary to widespread belief, it is shown that full confinement is possible for zero-energy states in pristine graphene. The exact analytical solutions for the zero-energy modes confined within a smooth one-dimensional potential V = [alpha]/cosh ([beta]x) are presented. This potential provides agood fit for the potential profiles of top-gated graphene structures. It is shown that there is a threshold value of the characteristic potential strength [alpha]/[beta] for which the first mode appears, in striking contrast to the non-relativistic case. A relationship between the characteristic strength and the number of modes within the potential is found. An experimental setup is proposed for the observation of these modes. The proposed geometry could be utilized in future graphene-based devices with high on/off current ratios.
Download or read book Graphene and other Two dimensional Materials in Nanoelectronics and Optoelectronics written by Jie Sun and published by MDPI. This book was released on 2020-12-02 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene is probably the most fascinating material discovered in this century. A group of 2D materials can be called graphene derivatives, and these have attracted tremendous interest. This includes materials that are one or a few atoms thick. They have outstanding optical/electrical properties, and, most importantly, they are flat and thin—they can be processed with existing semiconductor technologies. Therefore, they have great potential in nanoelectronics and optoelectronics, playing a revolutionary role in these fields via their integration with other bulk materials. Of course, there are still challenges, such as large-scale production, as well as the mechanical transfer of these atomically thin sheets. These are the fields where scientists are now actively doing research. In this book, some leading scientists in the area share their most recent results on the material growth, device physics/processing, and system integration of 2D materials and devices. This book can serve as a starting point for young students to get familiar with the field, and should also be valuable to established device physicists and engineers who would like to explore the potential applications of 2D materials in electronics.
Download or read book Thermal Transport in Carbon Based Nanomaterials written by Gang Zhang and published by Elsevier. This book was released on 2017-06-13 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Transport in Carbon-Based Nanomaterials describes the thermal properties of various carbon nanomaterials and then examines their applications in thermal management and renewable energy. Carbon nanomaterials include: one-dimensional (1D) structures, like nanotubes; two-dimensional (2D) crystal lattice with only one-atom-thick planar sheets, like graphenes; composites based on carbon nanotube or graphene, and diamond nanowires and thin films. In the past two decades, rapid developments in the synthesis and processing of carbon-based nanomaterials have created a great desire among scientists to gain a greater understanding of thermal transport in these materials. Thermal properties in nanomaterials differ significantly from those in bulk materials because the characteristic length scales associated with the heat carriers, phonons, are comparable to the characteristic length. Carbon nanomaterials with high thermal conductivity can be applied in heat dissipation. This looks set to make a significant impact on human life and, with numerous commercial developments emerging, will become a major academic topic over the coming years. This authoritative and comprehensive book will be of great use to both the existing scientific community in this field, as well as for those who wish to enter it. Includes coverage of the most important and commonly adopted computational and experimental methods to analyze thermal properties in carbon nanomaterials Contains information about the growth of carbon nanomaterials, their thermal properties, and strategies to control thermal properties and applications, allowing readers to assess how to use each material most efficiently Offers a comprehensive overview of the theoretical background behind thermal transport in carbon nanomaterials
Download or read book Nanotechnology Research Directions for Societal Needs in 2020 written by Mihail C. Roco and published by Springer Science & Business Media. This book was released on 2011-06-17 with total page 723 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a comprehensive perspective on the global scientific, technological, and societal impact of nanotechnology since 2000, and explores the opportunities and research directions in the next decade to 2020. The vision for the future of nanotechnology presented here draws on scientific insights from U.S. experts in the field, examinations of lessons learned, and international perspectives shared by participants from 35 countries in a series of high-level workshops organized by Mike Roco of the National Science Foundation (NSF), along with a team of American co-hosts that includes Chad Mirkin, Mark Hersam, Evelyn Hu, and several other eminent U.S. scientists. The study performed in support of the U.S. National Nanotechnology Initiative (NNI) aims to redefine the R&D goals for nanoscale science and engineering integration and to establish nanotechnology as a general-purpose technology in the next decade. It intends to provide decision makers in academia, industry, and government with a nanotechnology community perspective of productive and responsible paths forward for nanotechnology R&D.
Download or read book Essentials in Nanoscience and Nanotechnology written by Narendra Kumar and published by John Wiley & Sons. This book was released on 2016-04-11 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes various aspects of nanoscience and nanotechnology. It begins with an introduction to nanoscience and nanotechnology and includes a historical prospective, nanotechnology working in nature, man -made nanomaterial and impact of nanotechnology illustrated with examples. It goes on to describes general synthetic approaches and strategies and also deals with the characterization of nanomaterial using modern tools and techniques to give basic understanding to those interested in learning this emerging area. It then deals with different kinds of nanomaterial such as inorganics, carbon based-, nanocomposites and self-assembled/supramolecular nano structures in terms of their varieties, synthesis, properties etc. In addition, it contains chapters devoted to unique properties with mathematical treatment wherever applicable and the novel applications dealing with information technology, pollution control (environment, water), energy, nanomedicine, healthcare, consumer goods etc.
