Download or read book Integrated Electronics on Aluminum Nitride written by Reet Chaudhuri and published by Springer Nature. This book was released on 2022-12-06 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis outlines the principles, device physics, and technological applications of electronics based on the ultra-wide bandgap semiconductor aluminum nitride. It discusses the basic principles of electrostatics and transport properties of polarization-induced two-dimensional electron and hole channels in semiconductor heterostructures based on aluminum nitride. It explains the discovery of high-density two-dimensional hole gases in undoped heterojunctions, and shows how these high conductivity n- and p-type channels are used for high performance nFETs and pFETs, along with wide bandgap RF, mm-wave, and CMOS applications. The thesis goes on to discuss how the several material advantages of aluminum nitride, such as its high thermal conductivity and piezoelectric coefficient, enable not just high performance of transistors, but also monolithic integration of passive elements such as high frequency filters, enabling a new form factor for integrated RF electronics.

Download or read book III Nitride Electronic Devices written by and published by Academic Press. This book was released on 2019-10-18 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: III-Nitride Electronic Devices, Volume 102, emphasizes two major technical areas advanced by this technology: radio frequency (RF) and power electronics applications. The range of topics covered by this book provides a basic understanding of materials, devices, circuits and applications while showing the future directions of this technology. Specific chapters cover Electronic properties of III-nitride materials and basics of III-nitride HEMT, Epitaxial growth of III-nitride electronic devices, III-nitride microwave power transistors, III-nitride millimeter wave transistors, III-nitride lateral transistor power switch, III-nitride vertical devices, Physics-Based Modeling, Thermal management in III-nitride HEMT, RF/Microwave applications of III-nitride transistor/wireless power transfer, and more. - Presents a complete review of III-Nitride electronic devices, from fundamental physics, to applications in two key technical areas – RF and power electronics - Outlines fundamentals, reviews state-of-the-art circuits and applications, and introduces current and emerging technologies - Written by a panel of academic and industry experts in each field

Download or read book Molecular Beam Epitaxy written by Hajime Asahi and published by John Wiley & Sons. This book was released on 2019-02-01 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers both the fundamentals and the state-of-the-art technology used for MBE Written by expert researchers working on the frontlines of the field, this book covers fundamentals of Molecular Beam Epitaxy (MBE) technology and science, as well as state-of-the-art MBE technology for electronic and optoelectronic device applications. MBE applications to magnetic semiconductor materials are also included for future magnetic and spintronic device applications. Molecular Beam Epitaxy: Materials and Applications for Electronics and Optoelectronics is presented in five parts: Fundamentals of MBE; MBE technology for electronic devices application; MBE for optoelectronic devices; Magnetic semiconductors and spintronics devices; and Challenge of MBE to new materials and new researches. The book offers chapters covering the history of MBE; principles of MBE and fundamental mechanism of MBE growth; migration enhanced epitaxy and its application; quantum dot formation and selective area growth by MBE; MBE of III-nitride semiconductors for electronic devices; MBE for Tunnel-FETs; applications of III-V semiconductor quantum dots in optoelectronic devices; MBE of III-V and III-nitride heterostructures for optoelectronic devices with emission wavelengths from THz to ultraviolet; MBE of III-V semiconductors for mid-infrared photodetectors and solar cells; dilute magnetic semiconductor materials and ferromagnet/semiconductor heterostructures and their application to spintronic devices; applications of bismuth-containing III–V semiconductors in devices; MBE growth and device applications of Ga2O3; Heterovalent semiconductor structures and their device applications; and more. Includes chapters on the fundamentals of MBE Covers new challenging researches in MBE and new technologies Edited by two pioneers in the field of MBE with contributions from well-known MBE authors including three Al Cho MBE Award winners Part of the Materials for Electronic and Optoelectronic Applications series Molecular Beam Epitaxy: Materials and Applications for Electronics and Optoelectronics will appeal to graduate students, researchers in academia and industry, and others interested in the area of epitaxial growth.

Download or read book Handbook of GaN Semiconductor Materials and Devices written by Wengang (Wayne) Bi and published by CRC Press. This book was released on 2017-10-20 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses material growth, device fabrication, device application, and commercialization of energy-efficient white light-emitting diodes (LEDs), laser diodes, and power electronics devices. It begins with an overview on basics of semiconductor materials, physics, growth and characterization techniques, followed by detailed discussion of advantages, drawbacks, design issues, processing, applications, and key challenges for state of the art GaN-based devices. It includes state of the art material synthesis techniques with an overview on growth technologies for emerging bulk or free standing GaN and AlN substrates and their applications in electronics, detection, sensing, optoelectronics and photonics. Wengang (Wayne) Bi is Distinguished Chair Professor and Associate Dean in the College of Information and Electrical Engineering at Hebei University of Technology in Tianjin, China. Hao-chung (Henry) Kuo is Distinguished Professor and Associate Director of the Photonics Center at National Chiao-Tung University, Hsin-Tsu, Taiwan, China. Pei-Cheng Ku is an associate professor in the Department of Electrical Engineering & Computer Science at the University of Michigan, Ann Arbor, USA. Bo Shen is the Cheung Kong Professor at Peking University in China.

Download or read book Science Abstracts written by and published by . This book was released on 1995 with total page 1990 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 1860 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2002 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Wide Bandgap Based Devices written by Farid Medjdoub and published by MDPI. This book was released on 2021-05-26 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging wide bandgap (WBG) semiconductors hold the potential to advance the global industry in the same way that, more than 50 years ago, the invention of the silicon (Si) chip enabled the modern computer era. SiC- and GaN-based devices are starting to become more commercially available. Smaller, faster, and more efficient than their counterpart Si-based components, these WBG devices also offer greater expected reliability in tougher operating conditions. Furthermore, in this frame, a new class of microelectronic-grade semiconducting materials that have an even larger bandgap than the previously established wide bandgap semiconductors, such as GaN and SiC, have been created, and are thus referred to as “ultra-wide bandgap” materials. These materials, which include AlGaN, AlN, diamond, Ga2O3, and BN, offer theoretically superior properties, including a higher critical breakdown field, higher temperature operation, and potentially higher radiation tolerance. These attributes, in turn, make it possible to use revolutionary new devices for extreme environments, such as high-efficiency power transistors, because of the improved Baliga figure of merit, ultra-high voltage pulsed power switches, high-efficiency UV-LEDs, and electronics. This Special Issue aims to collect high quality research papers, short communications, and review articles that focus on wide bandgap device design, fabrication, and advanced characterization. The Special Issue will also publish selected papers from the 43rd Workshop on Compound Semiconductor Devices and Integrated Circuits, held in France (WOCSDICE 2019), which brings together scientists and engineers working in the area of III–V, and other compound semiconductor devices and integrated circuits. In particular, the following topics are addressed: – GaN- and SiC-based devices for power and optoelectronic applications – Ga2O3 substrate development, and Ga2O3 thin film growth, doping, and devices – AlN-based emerging material and devices – BN epitaxial growth, characterization, and devices

Download or read book Power GaN Devices written by Matteo Meneghini and published by Springer. This book was released on 2016-09-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.

Download or read book Polarization Effects in Semiconductors written by Debdeep Jena and published by Springer Science & Business Media. This book was released on 2008 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polarization Effects in Semiconductors: From Ab Initio Theory to Device Applications presents the latest understanding of the solid state physics, electronic implications and practical applications of the unique spontaneous or pyro-electric polarization charge of wurtzite compound semiconductors, and associated piezo-electric effects in strained thin film heterostructures. These heterostructures are used in wide band gap semiconductor based sensors, in addition to various electronic and opto-electronic semiconductor devices. The book covers the ab initio theory of polarization in cubic and hexagonal semiconductors, growth of thin film GaN, GaN/AlGaN GaAlN/ AlGaInN, and other nitrides, and SiC heterostructures. It discusses the effects of spontaneous and piezoelectric polarization on band diagrams and electronic properties of abrupt and compositionally graded heterostructures, electronic characterization of polarization-induced charge distributions by scanning-probe spectroscopies, and gauge factors and strain effects. In addition, polarization in extended defects, piezo-electric strain/charge engineering, and application to device design and processing are covered. The effects of polarization on the fundamental electron transport properties, and on the basic optical transitions are described. The crucial role of polarization in devices such as high electron mobility transistors (HEMTs) and light-emitting diodes (LEDs) is covered. The chapters are authored by professors and researchers in the fields of physics, applied physics and electrical engineering, who worked for 5 years under the "Polarization Effects in Semiconductors" DOD funded Multi Disciplinary University Research Initiative. This book will be of interest to graduate students and researchers working in the field of wide-bandgap semiconductor physics and their device applications. It will also be useful for practicing engineers in the field of wide-bandgap semiconductor device research and development.

Download or read book Handbook for III V High Electron Mobility Transistor Technologies written by D. Nirmal and published by CRC Press. This book was released on 2019-05-14 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focusses on III-V high electron mobility transistors (HEMTs) including basic physics, material used, fabrications details, modeling, simulation, and other important aspects. It initiates by describing principle of operation, material systems and material technologies followed by description of the structure, I-V characteristics, modeling of DC and RF parameters of AlGaN/GaN HEMTs. The book also provides information about source/drain engineering, gate engineering and channel engineering techniques used to improve the DC-RF and breakdown performance of HEMTs. Finally, the book also highlights the importance of metal oxide semiconductor high electron mobility transistors (MOS-HEMT). Key Features Combines III-As/P/N HEMTs with reliability and current status in single volume Includes AC/DC modelling and (sub)millimeter wave devices with reliability analysis Covers all theoretical and experimental aspects of HEMTs Discusses AlGaN/GaN transistors Presents DC, RF and breakdown characteristics of HEMTs on various material systems using graphs and plots

Download or read book Optoelectronic Devices written by M Razeghi and published by Elsevier. This book was released on 2004 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tremendous progress has been made in the last few years in the growth, doping and processing technologies of the wide bandgap semiconductors. As a result, this class of materials now holds significant promis for semiconductor electronics in a broad range of applications. The principal driver for the current revival of interest in III-V Nitrides is their potential use in high power, high temperature, high frequency and optical devices resistant to radiation damage. This book provides a wide number of optoelectronic applications of III-V nitrides and covers the entire process from growth to devices and applications making it essential reading for those working in the semiconductors or microelectronics. Broad review of optoelectronic applications of III-V nitrides

Download or read book Wide Energy Bandgap Electronic Devices written by Fan Ren and published by World Scientific. This book was released on 2003 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents state-of-the-art GaN and SiC electronic devices, as well as detailed applications of these devices to power conditioning, r. f. base station infrastructure and high temperature electronics.

Download or read book The Physics of Semiconductor Devices written by R. K. Sharma and published by Springer. This book was released on 2019-01-31 with total page 1260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book disseminates the current knowledge of semiconductor physics and its applications across the scientific community. It is based on a biennial workshop that provides the participating research groups with a stimulating platform for interaction and collaboration with colleagues from the same scientific community. The book discusses the latest developments in the field of III-nitrides; materials & devices, compound semiconductors, VLSI technology, optoelectronics, sensors, photovoltaics, crystal growth, epitaxy and characterization, graphene and other 2D materials and organic semiconductors.

Download or read book III V Nitride Semiconductors written by Edward T. Yu and published by CRC Press. This book was released on 2022-10-30 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concepts in this book will provide a comprehensive overview of the current state for a broad range of nitride semiconductor devices, as well as a detailed introduction to selected materials and processing issues of general relevance for these applications. This compilation is very timely given the level of interest and the current stage of research in nitride semiconductor materials and device applications. This volume consists of chapters written by a number of leading researchers in nitride materials and device technology addressing Ohmic and Schottky contacts, AIGalnN multiple quantum well laser diodes, nitride vertical cavity emitting lasers, and ultraviolet photodetectors. This unique volume provides a comprehensive review and introduction to application and devices based on GaN and related compounds for newcomers to the field and stimulus to further advances for experienced researchers.

Download or read book Oxide Electronics written by Asim K. Ray and published by John Wiley & Sons. This book was released on 2021-04-12 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxide Electronics Multiple disciplines converge in this insightful exploration of complex metal oxides and their functions and properties Oxide Electronics delivers a broad and comprehensive exploration of complex metal oxides designed to meet the multidisciplinary needs of electrical and electronic engineers, physicists, and material scientists. The distinguished author eschews complex mathematics whenever possible and focuses on the physical and functional properties of metal oxides in each chapter. Each of the sixteen chapters featured within the book begins with an abstract and an introduction to the topic, clear explanations are presented with graphical illustrations and relevant equations throughout the book. Numerous supporting references are included, and each chapter is self-contained, making them perfect for use both as a reference and as study material. Readers will learn how and why the field of oxide electronics is a key area of research and exploitation in materials science, electrical engineering, and semiconductor physics. The book encompasses every application area where the functional and electronic properties of various genres of oxides are exploited. Readers will also learn from topics like: Thorough discussions of High-k gate oxide for silicon heterostructure MOSFET devices and semiconductor-dielectric interfaces An exploration of printable high-mobility transparent amorphous oxide semiconductors Treatments of graphene oxide electronics, magnetic oxides, ferroelectric oxides, and materials for spin electronics Examinations of the calcium aluminate binary compound, perovoksites for photovoltaics, and oxide 2Degs Analyses of various applications for oxide electronics, including data storage, microprocessors, biomedical devices, LCDs, photovoltaic cells, TFTs, and sensors Suitable for researchers in semiconductor technology or working in materials science, electrical engineering, and physics, Oxide Electronics will also earn a place in the libraries of private industry researchers like device engineers working on electronic applications of oxide electronics. Engineers working on photovoltaics, sensors, or consumer electronics will also benefit from this book.

Download or read book High Frequency GaN Electronic Devices written by Patrick Fay and published by Springer. This book was released on 2019-08-01 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together recent research by scientists and device engineers working on both aggressively-scaled conventional transistors as well as unconventional high-frequency device concepts in the III-N material system. Device concepts for mm-wave to THz operation based on deeply-scaled HEMTs, as well as distributed device designs based on plasma-wave propagation in polarization-induced 2DEG channels, tunneling, and hot-carrier injection are discussed in detail. In addition, advances in the underlying materials science that enable these demonstrations, and advancements in metrology that permit the accurate characterization and evaluation of these emerging device concepts are also included. Targeting readers looking to push the envelope in GaN-based electronics device research, this book provides a current, comprehensive treatment of device concepts and physical phenomenology suitable for applying GaN and related materials to emerging ultra-high-frequency applications. Offers readers an integrated treatment of the state of the art in both conventional (i.e., HEMT) scaling as well as unconventional device architectures suitable for amplification and signal generation in the mm-wave and THz regime using GaN-based devices, written by authors that are active and widely-known experts in the field; Discusses both conventional scaled HEMTs (into the deep mm-wave) as well as unconventional approaches to address the mm-wave and THz regimes; Provides “vertically integrated” coverage, including materials science that enables these recent advances, as well as device physics & design, and metrology techniques; Includes fundamental physics, as well as numerical simulations and experimental realizations.