Download or read book High Frequency Continuous Time Filters in Digital CMOS Processes written by Shanthi Pavan and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is an ever increasing trend towards putting entire systems on a single chip. This means that analog circuits will have to coexist on the same substrate along with massive digital systems. Since technologies are optimized with these digital systems in mind, designers will have to make do with standard CMOS processes in the years to come. We address analog filter design from this perspective. Filters form important blocks in applications ranging from computer disc-drive chips to radio transceivers. In this book, we develop the theory and techniques necessary for the implementation of high frequency (hundreds of megahertz) programmable continuous time filters in standard CMOS processes. Since high density poly-poly capacitors are not available in these technologies, alternative capacitor structures have to be found. Met- metal capacitors have low specific capacitance. An alternative is to use the (inherently nonlinear) capacitance formed by MOSFET gates. In Chapter 2, we focus on the use of MOS capacitors as integrating elements. A physics-based model which predicts distortion accurately is presented for a two-terminal MOS structure in accumulation. Distortion in these capacitors as a function of signal swing and bias voltage is computed. Chapter 3 reviews continuous-time filter architectures in the light of bias-dependent integrating capacitors. We also discuss the merits and demerits of various CMOS transconductance elements. The problems encountered in designing high frequency programmable filters are discussed in detail.

Download or read book High Performance CMOS Continuous Time Filters written by José Silva-Martínez and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Performance CMOS Continuous-Time Filters is devoted to the design of CMOS continuous-time filters. CMOS is employed because the most complex integrated circuits have been realized with this technology for two decades. The most important advantages and drawbacks of continuous-time filters are clearly shown. The transfer function is one of the most important filter parameters but several others (like intermodulation distortion, power-supply rejection ratio, noise level and dynamic range) are fundamental in the design of high-performance systems. Special attention is paid to the practical aspects of the design, which shows the difference between an academic design and an industrial design. A clear understanding of the behavior of the circuits and techniques is preferred over complex equations or interpretation of simulated results. Step-by-step design procedures are very often used to clarify the use of the techniques and topologies. The organization of this text is hierarchical, starting with the design consideration of the basic building blocks and ending with the design of several high-performance continuous-time filters. Most of the circuits have been fabricated, theoretically analyzed and simulated, and silicon measurement results are compared with each other. High-Performance CMOS Continuous-Time Filters can be used as a text book for senior or graduate courses on this topic and can also be useful for industrial engineers as a reference book.

Download or read book Continuous Time Active Filter Design written by T. Deliyannis and published by CRC Press. This book was released on 2019-05-08 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the design of active RC filters in continuous time. Topics include: filter fundamentals active elements realization of functions using opamps LC ladder filters operational transconductance amplifier circuits (OTACs) MOSFET-C filters Continuous-Time Active Filter Design uses wave variables to enable the reader to better understand the introduction of more complex variables created through linear transformations of voltages and currents. Intended for undergraduate students in electrical engineering, Continuous-Time Active Filter Design provides chapters as self-contained units, including introductory material leading to active RC filters.

Download or read book Analog CMOS Filters for Very High Frequencies written by Bram Nauta and published by Springer Science & Business Media. This book was released on 1992-09-30 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated circuit technology is widely used for the full integration of electronic systems. In general, these systems are realized using digital techniques implemented in CMOS technology. The low power dissipation, high packing density, high noise immunity, ease of design and the relative ease of scaling are the driving forces of CMOS technology for digital applications. Parts of these systems cannot be implemented in the digital domain and will remain analog. In order to achieve complete system integration these analog functions are preferably integrated in the same CMOS technology. An important class of analog circuits that need to be integrated in CMOS are analog filters. This book deals with very high frequency (VHF) filters, which are filters with cut-off frequencies ranging from the low megahertz range to several hundreds of megahertz. Until recently the maximal cut-off frequencies of CMOS filters were limited to the low megahertz range. By applying the techniques presented in this book the limit could be pushed into the true VHF domain, and integrated VHF filters become feasible. Application of these VHF filters can be found in the field of communication, instrumentation and control systems. For example, pre and post filtering for high-speed AD and DA converters, signal reconstruction, signal decoding, etc. The general design philosophy used in this book is to allow only the absolute minimum of signal carrying nodes throughout the whole filter. This strategy starts at the filter synthesis level and is extended to the level of electronic circuitry. The result is a filter realization in which all capacitators (including parasitics) have a desired function. The advantage of this technique is that high frequency parasitic effects (parasitic poles/zeros) are minimally present. The book is a reference for engineers in research or development, and is suitable for use as a text for advanced courses on the subject. >

Download or read book Design of High Frequency Integrated Analogue Filters written by Yichuang Sun and published by IET. This book was released on 2002-04-15 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sun (communication electronics, U. of Hertfordshire, UK), this volume's editor, also contributed a chapter on the architectures and design of OTA/gm-C filters. The other papers describe on-chip automatic tuning of filters, analog adaptive filters, low voltage techniques for switched-current filters, log domain filters, the MOSFET-C technique and active filters using integrated inductors. The contributors teach electrical engineering in the US, the UK, Thailand, and Canada. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book The Design and Implementation of Low Power CMOS Radio Receivers written by Derek Shaeffer and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is hardly a profound observation to note that we remain in the midst of a wireless revolution. In 1998 alone, over 150 million cell phones were sold worldwide, representing an astonishing 50% increase over the previous year. Maintaining such a remarkable growth rate requires constant innovation to decrease cost while increasing performance and functionality. Traditionally, wireless products have depended on a mixture of semicond- tor technologies, spanning GaAs, bipolar and BiCMOS, just to name a few. A question that has been hotly debated is whether CMOS could ever be suitable for RF applications. However, given the acknowledged inferiority of CMOS transistors relative to those in other candidate technologies, it has been argued by many that “CMOS RF” is an oxymoron, an endeavor best left cloistered in the ivory towers of academia. In rebuttal, there are several compelling reasons to consider CMOS for wi- less applications. Aside from the exponential device and density improvements delivered regularly by Moore’s law, only CMOS offers a technology path for integrating RF and digital elements, potentially leading to exceptionally c- pact and low-cost devices. To enable this achievement, several thorny issues need to be resolved. Among these are the problem of poor passive com- nents, broadband noise in MOSFETs, and phase noise in oscillators made with CMOS. Beyond the component level, there is also the important question of whether there are different architectural choices that one would make if CMOS were used, given the different constraints.

Download or read book Analog Circuit Design written by Rudy J. van de Plassche and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: The realization of signal sampling and quantization at high sample rates with low power dissipation is an important goal in many applications, includ ing portable video devices such as camcorders, personal communication devices such as wireless LAN transceivers, in the read channels of magnetic storage devices using digital data detection, and many others. This paper describes architecture and circuit approaches for the design of high-speed, low-power pipeline analog-to-digital converters in CMOS. Here the term high speed is taken to imply sampling rates above 1 Mhz. In the first section the dif ferent conversion techniques applicable in this range of sample rates is dis cussed. Following that the particular problems associated with power minimization in video-rate pipeline ADCs is discussed. These include optimi zation of capacitor sizes, design of low-voltage transmission gates, and opti mization of switched capacitor gain blocks and operational amplifiers for minimum power dissipation. As an example of the application of these tech niques, the design of a power-optimized lO-bit pipeline AID converter (ADC) that achieves =1. 67 mW per MS/s of sampling rate from 1 MS/s to 20 MS/s is described. 2. Techniques for CMOS Video-Rate AID Conversion Analog-to-digital conversion techniques can be categorized in many ways. One convenient means of comparing techniques is to examine the number of "analog clock cycles" required to produce one effective output sample of the signal being quantized.

Download or read book Continuous Time Active Analog Filters written by Muzaffer Ahmad Siddiqi and published by Cambridge University Press. This book was released on 2020-03-26 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the techniques of analog filter designs and their utilization in a large number of practical applications such as audio/video signal processing, biomedical instrumentation and antialiasing/reconstruction filters. Covering high frequency filter design like active R and active C filters, the author tries to present the subject in a simpler way as a base material for analog filter designs, as well as for advanced study of continuous-time filter designs, and allied filter design areas of current-mode (CM) and switched capacitor filters. With updated basic analog filter design approaches, the book will provide a better choice to select appropriate design technique for a specific application. Focussing mainly on continuous time domain techniques, which forms the base of all other techniques, this is an essential reading for undergraduate students. Numerous solved examples, practical applications and case studies on audio/video devices, medical instrumentation, control and antialiasing/reconstruction filters will provide ample motivation to readers.

Download or read book Current Mode VLSI Analog Filters written by P.V. Ananda Mohan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current-mode design is of great interest to high-tech analog designers today, who are principally concerned with designing whole systems on a chip. This work focuses on the theory and methods of many important current-mode circuit design techniques making it a comprehensive technical overview that fills a gap in the current literature. The purpose of the book is to compile all available information in the area of OTA-C filters, current conveyor and CFOA based filters, switched-current filters, and log-domain filters into one complete reference volume. Practical applications of current-mode design techniques for realizing practical VLSI systems such as disk drive read channel ICs and video filters are covered in detail. The background required for this book is an exposure to a first course in active RC filters, digital signal processing and optionally, some knowledge of switched capacitor filters.

Download or read book Continuous Time Low Pass Filters for Integrated Wideband Radio Receivers written by Ville Saari and published by Springer Science & Business Media. This book was released on 2012-03-15 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a new filter design approach and concentrates on the circuit techniques that can be utilized when designing continuous-time low-pass filters in modern ultra-deep-submicron CMOS technologies for integrated wideband radio receivers. Coverage includes system-level issues related to the design and implementation of a complete single-chip radio receiver and related to the design and implementation of a filter circuit as a part of a complete single-chip radio receiver. Presents a new filter design approach, emphasizing low-voltage circuit solutions that can be implemented in modern, ultra-deep-submicron CMOS technologies;Includes filter circuit implementations designed as a part of a single-chip radio receiver in modern 1.2V 0.13um and 65nm CMOS;Describes design and implementation of a continuous-time low-pass filter for a multicarrier WCDMA base-station;Emphasizes system-level considerations throughout.

Download or read book Analog Circuits and Devices written by Wai-Kai Chen and published by CRC Press. This book was released on 2003-03-26 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Principles and Application in Engineering Series is a new series of convenient, economical references sharply focused on particular engineering topics and subspecialties. Each volume in this series comprises chapters carefully selected from CRC's bestselling handbooks, logically organized for optimum convenience, and thoughtfully priced to fit

Download or read book Nonlinear Dynamics Of Electronic Systems Proceedings Of The Workshop Ndes 93 written by Anthony C Davies and published by World Scientific. This book was released on 1994-05-31 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the extended versions of the papers presented at an international specialist workshop in July 1993, together with some additional contributions, all concerned with the analysis and applications of electronic circuits with chaotic behaviour, providing a topical overview of work in this rapidly developing field.

Download or read book The VLSI Handbook written by Wai-Kai Chen and published by CRC Press. This book was released on 2018-10-03 with total page 2320 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the new millenium, Wai-Kai Chen introduced a monumental reference for the design, analysis, and prediction of VLSI circuits: The VLSI Handbook. Still a valuable tool for dealing with the most dynamic field in engineering, this second edition includes 13 sections comprising nearly 100 chapters focused on the key concepts, models, and equations. Written by a stellar international panel of expert contributors, this handbook is a reliable, comprehensive resource for real answers to practical problems. It emphasizes fundamental theory underlying professional applications and also reflects key areas of industrial and research focus. WHAT'S IN THE SECOND EDITION? Sections on... Low-power electronics and design VLSI signal processing Chapters on... CMOS fabrication Content-addressable memory Compound semiconductor RF circuits High-speed circuit design principles SiGe HBT technology Bipolar junction transistor amplifiers Performance modeling and analysis using SystemC Design languages, expanded from two chapters to twelve Testing of digital systems Structured for convenient navigation and loaded with practical solutions, The VLSI Handbook, Second Edition remains the first choice for answers to the problems and challenges faced daily in engineering practice.

Download or read book Design of Very High Frequency Multirate Switched Capacitor Circuits written by Seng-Pan U and published by Springer Science & Business Media. This book was released on 2006 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Very High-Frequency Multirate Switched-Capacitor Circuits presents the theory and the corresponding CMOS implementation of the novel multirate sampled-data analog interpolation technique which has its great potential on very high-frequency analog frond-end filtering due to its inherent dual advantage of reducing the speed of data-converters and DSP core together with the specification relaxation of the post continuous-time filtering. This technique completely eliminates the traditional phenomenon of sampled-and-hold frequency-shaping at the lower input sampling rate. Also, in order to tackle physical IC imperfections at very high frequency, the state-of-the-art circuit design and layout techniques for high-speed Switched-Capacitor (SC) circuits are comprehensively discussed: -Optimum circuit architecture tradeoff analysis -Simple speed and power trade-off analysis of active elements -High-order filtering response accuracy with respect to capacitor-ratio mismatches -Time-interleaved effect with respect to gain and offset mismatch -Time-interleaved effect with respect to timing-skew and random jitter with non-uniformly holding -Stage noise analysis and allocation scheme -Substrate and supply noise reduction -Gain-and offset-compensation techniques -High-bandwidth low-power amplifier design and layout -Very low timing-skew multiphase generation Two tailor-made optimum design examples in CMOS are presented. The first one achieves a 3-stage 8-fold SC interpolating filter with 5.5MHz bandwidth and 108MHz output sampling rate for a NTSC/PAL CCIR 601 digital video at 3 V. Another is a 15-tap 57MHz SC FIR bandpass interpolating filter with 4-fold sampling rate increase to 320MHz and the first-time embedded frequency band up-translation for DDFS system at 2.5V. The corresponding chip prototype achieves so far the highest operating frequency, highest filter order and highest center frequency with highest dynamic range under the lowest supply voltage when compared to the previously reported high-frequency SC filters in CMOS.

Download or read book Modern Receiver Front Ends written by Joy Laskar and published by John Wiley & Sons. This book was released on 2004-04-09 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Architectures BABAK MATINPOUR and JOY LASKAR * Describes the actual implementation of receiver architectures from the initial design to an IC-based product * Presents many tricks-of-the-trade not usually covered in textbooks * Covers a range of practical issues including semiconductor technology selection, cost versus performance, yield, packaging, prototype development, testing, and analysis * Discusses architectures that are employed in modern broadband wireless systems

Download or read book CMOS Telecom Data Converters written by Angel Rodríguez-Vázquez and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS Telecom Data Converters compiles the latest achievements regarding the design of high-speed and high-resolution data converters in deep submicron CMOS technologies. The four types of analog-to-digital converter architectures commonly found in this arena are covered, namely sigma-delta, pipeline, folding/interpolating and flash. For all these types, latest achievements regarding the solution of critical architectural and circuital issues are presented, and illustrated through IC prototypes with measured state-of-the-art performances. Some of these prototypes are conceived to be employed at the chipset of newest generation wireline modems (ADSL and ADSL+). Others are intended for wireless transceivers. Besides analog-to-digital converters, the book also covers other functions needed for communication systems, such as digital-to-analog converters, analog filters, programmable gain amplifiers, digital filters, and line drivers.

Download or read book Integrated Video Frequency Continuous Time Filters written by Scott D. Willingham and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in the state of the art mean the signal processing ICs of ever-increasing complexity are being introduced. While the typical portion of a large IC devoted to analog circuits has diminished, the performance of those surviving analog signal processing circuits remains vital and their design challenging. Moreover, the emerging high-definition TV technology has created a new area for IC development, one with formidable signal processing requirements. The antialiasing filters needed for one proposed HDTV decoder motivated the research documented in this book. Sharply selective filters place tight constraints on the permitted excess phase shifts of their constituent circuits. Combined with stringent requirements for low distortion at video frequencies, these constraints challenge the IC filter designer. Integrated Video-Frequency Continuous-Time Filters: High-Performance Realizations in BiCMOS deals with what is arguably the mainstay of analog signal processing circuits. Prominent applications in computer disk-drive read channels, video receivers, rf circuits, and antialiasing and reconstruction in data converters testifies to their importance. Moreover, they are excellent benchmarks for more general analog signal processors. Bipolar and MOSFET transistors, freely combined at the lowest circuit levels, provide the designer with an opportunity to develop potent variations on the standard idioms. The book considers the general principles of BiCMOS circuit design, through to a demanding design problem. This case-study approach allows a concrete discussion of the justification for and practical trade-offs of each design decision. Audience: A reference work for experienced IC designers and a text for advanced IC design students.