Download or read book High Efficiency Air Filters EPA HEPA and ULPA Aerosol Production Measuring Equipment Particle Counting Statistics written by British Standards Institute Staff and published by . This book was released on 1910-01-31 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Air filters, Air cleaning equipment, Filters, Efficiency, Air-conditioning systems, Ventilation, Clean rooms, Aerosols, Dispersions (chemical), Performance testing, Particle size measurement, Measuring instruments, Test equipment, Physical property measurement, Classification systems, Specimen preparation, Error correction, Calibration, Maintenance, Inspection, Accuracy, Pressure testing, Humidity measurement, Statistical methods of analysis
Download or read book High Efficiency Air Filters HEPA and ULPA Aerosol Production Measuring Equipment Particle Counting Statistics written by British Standards Institute Staff and published by . This book was released on 1998-11 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Air filters, Air cleaning equipment, Filters, Efficiency, Air-conditioning systems, Ventilation, Clean rooms, Aerosols, Dispersions (chemical), Performance testing, Particle size measurement, Measuring instruments, Test equipment, Density, Melting point, Viscosity, Boiling point, Vapour pressure, Refractive index, Condensation, Physical property measurement, Classification systems, Specimen preparation, Error correction, Calibration, Maintenance, Inspection, Accuracy, Pressure testing, Humidity measurement, Statistical methods of analysis, Bibliography
Download or read book Handbook of Filter Media written by Derek B. Purchas and published by Elsevier. This book was released on 2002-10-28 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Filter Media -- Textiles -- Filter Papers and Filter Sheets -- Media for air and gas filters -- Screens and Meshes -- Porous Sheets and Tubes (excluding Membranes) -- Membranes -- Cartridges and Special Fabrications -- Loose Powders, granules and fibres -- Testing filter media.
Download or read book Pharmaceutical Isolators written by Brian Midcalf and published by Pharmaceutical Press. This book was released on 2004 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work considers the basic concepts, definitions, and standards necessary in the design, construction, commissioning, maintenance, and use of pharmaceutical isolators.
Download or read book Air Conditioning Energy Consumption and Environmental Quality written by Matheos Santamouris and published by EOLSS Publications. This book was released on 2009 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Air Conditioning - Energy Consumption and Environmental Quality theme is the component of Encyclopedia of Energy Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The book on Air Conditioning - Energy Consumption and Environmental Quality in the Encyclopedia of Energy Sciences, Engineering and Technology Resources considers the following topics on Systems and Equipment for Space Heating, Ventilation Systems, Air conditioning and Refrigeration and Cryogenic Systems. This volume is aimed at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.
Download or read book Good Quality Practice GQP in Pharmaceutical Manufacturing A Handbook written by Jordi Botet and published by Bentham Science Publishers. This book was released on 2015-09-28 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pharmaceutical manufacturing can be viewed as a supply chain which spans from the production and purchase of the starting and packaging materials through the manufacture of dosage forms until the safe reception of the finished product by the patient. The entire chain comprises of several processes: auditing, materials purchase (procurement), production, storage, distribution, quality control, and quality assurance. The quality standard for pharmaceutical production is ‘current good manufacturing practice (CGMP)’‘, which is applied within the frame of a pharmaceutical quality system (PQS). This implementation, however, requires a scientific approach and has to take into account several elements such as risk assessment, life cycle, patient protection, among other factors. Hence, pharmaceutical manufacturing is a complex subject in terms of regulation, given the technical and managerial requirements. This comprehensive handbook describes CGMP for new professionals who want to understand and apply the elements which build up pharmaceutical quality assurance. The book gives details about basic quality control requirements (such as risk management, quality hazards and management systems, documentation, clean environments, personnel training) and gives guidelines on regulatory aspects. This is an ideal handbook for undergraduates studying pharmaceutical or industrial manufacturing and supply chains as well for entrepreneurs and quality control professionals seeking to learn about CGMP standards and implementing quality assurance systems in the pharmaceutical sector.
Download or read book Handbook of Nonwovens written by S. J. Russell and published by Woodhead Publishing. This book was released on 2022-05-31 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Nonwovens, Second Edition updates and expands its popular interdisciplinary treatment of the properties, processing, and applications of nonwovens. Initial chapters review the development of the industry and the different classes of nonwoven material. The book then discusses methods of manufacture such as dry-laid, wet-laid, and polymer-laid web formation. Other techniques analyzed include mechanical, thermal, and chemical bonding, as well as chemical and mechanical finishing systems. The book concludes by assessing the characterization, testing, and modeling of nonwoven materials.Covering an unmatched range of materials with a variety of compositions and manufacturing routes, this remains the indispensable reference to nonwovens for designers, engineers, materials scientists, and researchers, particularly those interested in the manufacturing of automotive, aerospace, and medical products. Nonwovens are a unique class of textile material formed from fibers that are bonded together through various means to form a coherent structure. The range of properties they can embody make them an important part of a range of innovative products and solutions, which continues to attract interest from industry as well as academia. - Describes in detail the manufacturing processes of a range of nonwoven materials - Provides detailed coverage of the mechanical and thermal properties of non-woven fabrics - Includes extensive updates throughout on the characterization and testing of nonwovens - Explains how to model nonwoven structures
Download or read book Handbook of Nonwoven Filter Media written by Irwin M. Hutten and published by Elsevier. This book was released on 2007-03-23 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface; Introduction; Processes for Forming Nonwoven Filter Media; Raw Materials for Nonwoven Filter Media; Types of Filters Using Nonwovens; Applications for Nonwoven Filters; Test Methods for Nonwoven Filter Media; Standards for Nonwoven Media; Glossary; Index; Appendix.
Download or read book Hygiene in Food Processing written by H.L.M. Lelieveld and published by Elsevier. This book was released on 2014-02-14 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: The hygienic processing of food concerns both potential hazards in food products and the regulation, design, and management of food processing facilities. This second edition of Hygiene in Food Processing gives a revised overview of the practices for safe processing and incorporates additional chapters concerning pest control, microbiological environmental sampling, and the economics of food plants. Part one addresses microbial risks in foods and the corresponding regulation in the European Union. Part two discusses the hygienic design of food factory infrastructure, encompassing the design and materials for the factory itself, as well as food processing equipment. This edition includes a new chapter on the control of compressed gases used to pneumatically operate equipment. Part three focuses on cleaning and disinfection practices in food processing. The chapter on cleaning in place also considers more cost-effective systems, and complements the additional chapter on maintenance of equipment. These chapters also explore issues such as the hygiene of workers, potential infection by foreign bodies, and pest control. Further, the chapter on microbiological sampling explains how to calculate the risk of contamination depending on the product's environment. This essential second edition is useful to professionals responsible for hygiene in the food industry. It provides a comprehensive, yet concise and practical reference source for food plant managers, suppliers of food processing equipment, building contractors, and food inspectors looking for an authoritative introduction to hygiene regulation, hygienic design, and sanitation. - Provides a revised overview of the practices for safe processing - Incorporates additional chapters concerning pest control, microbiological environmental sampling, and the economics of food plants - This essential second edition is useful for professionals responsible for hygiene in the food industry
Download or read book Sterility Sterilisation and Sterility Assurance for Pharmaceuticals written by Tim Sandle and published by Elsevier. This book was released on 2013-10-31 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure to adequately control any microbial challenge associated within process or product by robust sterilisation will result in a contaminated marketed product, with potential harm to the patient. Sterilisation is therefore of great importance to healthcare and the manufacturers of medical devices and pharmaceuticals. Sterility, sterilisation and sterility assurance for pharmaceuticals examines different means of rendering a product sterile by providing an overview of sterilisation methods including heat, radiation and filtration. The book outlines and discusses sterilisation technology and the biopharmaceutical manufacturing process, including aseptic filling, as well as aspects of the design of containers and packaging, as well as addressing the cleanroom environments in which products are prepared. Consisting of 18 chapters, the book comprehensively covers sterility, sterilisation and microorganisms; pyrogenicity and bacterial endotoxins; regulatory requirements and good manufacturing practices; and gamma radiation. Later chapters discuss e-beam; dry heat sterilisation; steam sterilisation; sterilisation by gas; vapour sterilisation; and sterile filtration, before final chapters analyse depyrogenation; cleanrooms; aseptic processing; media simulation; biological indicators; sterility testing; auditing; and new sterilisation techniques. - Covers the main sterilisation methods of physical removal, physical alteration and inactivation - Includes discussion of medical devices, aseptically filled products and terminally sterilised products - Describes bacterial, pyrogenic, and endotoxin risks to devices and products
Download or read book Perry s Chemical Engineers Handbook 9th Edition written by Don W. Green and published by McGraw Hill Professional. This book was released on 2018-07-13 with total page 2274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-Date Coverage of All Chemical Engineering Topics―from the Fundamentals to the State of the Art Now in its 85th Anniversary Edition, this industry-standard resource has equipped generations of engineers and chemists with vital information, data, and insights. Thoroughly revised to reflect the latest technological advances and processes, Perry's Chemical Engineers' Handbook, Ninth Edition, provides unsurpassed coverage of every aspect of chemical engineering. You will get comprehensive details on chemical processes, reactor modeling, biological processes, biochemical and membrane separation, process and chemical plant safety, and much more. This fully updated edition covers: Unit Conversion Factors and Symbols • Physical and Chemical Data including Prediction and Correlation of Physical Properties • Mathematics including Differential and Integral Calculus, Statistics , Optimization • Thermodynamics • Heat and Mass Transfer • Fluid and Particle Dynamics *Reaction Kinetics • Process Control and Instrumentation• Process Economics • Transport and Storage of Fluids • Heat Transfer Operations and Equipment • Psychrometry, Evaporative Cooling, and Solids Drying • Distillation • Gas Absorption and Gas-Liquid System Design • Liquid-Liquid Extraction Operations and Equipment • Adsorption and Ion Exchange • Gas-Solid Operations and Equipment • Liquid-Solid Operations and Equipment • Solid-Solid Operations and Equipment •Chemical Reactors • Bio-based Reactions and Processing • Waste Management including Air ,Wastewater and Solid Waste Management* Process Safety including Inherently Safer Design • Energy Resources, Conversion and Utilization* Materials of Construction
Download or read book Fundamentals of Air Cleaning Technology and Its Application in Cleanrooms written by Zhonglin Xu and published by Springer Science & Business Media. This book was released on 2013-10-10 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Air Cleaning Technology and Its Application in Cleanrooms sets up the theoretical framework for cleanrooms. New ideas and methods are presented, which include the characteristic index of cleanrooms, uniform and non-uniform distribution characteristics, the minimum sampling volume, a new concept of outdoor air conditioning and the fundamentals of leakage-preventing layers. Written by an author who can look back on major scientific achievements and 50 years of experience in this field, this book offers a concise and accessible introduction to the fundamentals of air cleaning technology and its application. The work is intended for researchers, college teachers, graduates, designers, technicians and corporate R&D personnel in the field of HVAC and air cleaning technology. Zhonglin Xu is a senior research fellow at China Academy of Building Research.
Download or read book Annual Book of ASTM Standards written by ASTM International and published by . This book was released on 2004 with total page 1106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Planning Designing Health Care Facilities in Developing Countries written by Shashikant Sharma and published by CRC Press. This book was released on 2024-07-16 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building a clinically integrated workplace with a high level of clinical competence requires careful considerations of Hospital Planning. For greenfield or brownfield hospital projects, clinicians and C-Suite executives need to acquire capabilities to address the planning needs of any organization. This book aims to provide both theoretical and practical inputs for the Planning & Designing of Health Care Facilities in Developing Countries. It clearly indicates the steps to be followed, facts to be weighed, and components to be considered to arrive at a correct planning solution. With health reform looming and the revenue base shifting rapidly, we need to integrate patient safety concerns in the design process. Key Features • Liberal use of tables and figures to support conclusions, illustrate concepts, and display quantitative information, making it easier for readers to understand and refer to large quantities of data • Integrates the international norms for planning and designing health care facilities into the developing country setting • Handbook and ready reckoner for C-Suite executives, hospital engineers, project consultants, and hospital administration students
Download or read book Energy Research Abstracts written by and published by . This book was released on 1990 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Products and Services Catalogue written by and published by . This book was released on 2000 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Air Filters for Use at Nuclear Facilities written by P. Linder and published by . This book was released on 1970 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
