Download or read book High Density EMI Filter Design in High Power Three phase Motor Drive Systems written by Jing Xue (Researcher in electrical engineering) and published by . This book was released on 2014 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: High density EMI filter is important in the application of more-electric-aircraft (MEA). In this work, the author is focusing on several major aspects of EMI filter design that would influence the power density. In Chapter 1, the feature of EMI study and conventional design methods are reviewed. The interaction between the common-mode (CM) and differential-mode (DM) noise is one key factor introducing unnecessary weight to EMI filter design. In Chapter 2, the author explains the origin of the mixed-mode (MM) noise on the output side of three-phase motor drives. Experimental results have verified the existence of the MM noise in three-phase motor drives and its impact on power density. In Chapter 3, the noise mode transformation (NMT) in three-phase motor drives due to system impedance unbalance is discussed. Simulation and experimental results show that the NMT will cause EMI filter overdesign if not considered during the design stage. In Chapter 4 the author discusses the possibility of adding a CM inductor at the motor front and chassis end to reduce CM EMI filter weight. Experimental results show that the motor-end filter is effective in attenuating low frequency noise and has the benefit of being light weight comparing with the traditional three-phase CM choke. Cooling of the filter is of great importance in high power systems. In Chapter 5, a practical liquid-cooling design procedure for EMI filters in high power motor drives has been discussed. Potting and thermal modeling are analyzed. Thermal test results verify the effectiveness of the procedure. In Chapter 6, the author models the impedance impact of potting material and cooling cases on both CM and DM inductors. Experimental results match well with the developed models. In Chapter 7, a comprehensive design procedure for high density EMI filter in high power motor drives has been proposed, based on the knowledge of previous chapters. As the verification of the procedure, a high density EMI filter is designed and tested in a 100 kW three-phase motor drive system for MEA application. Conclusion and future work are summarized in Chapter 8.

Download or read book Design of Three phase AC Power Electronics Converters written by Fei "Fred" Wang and published by John Wiley & Sons. This book was released on 2023-11-08 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: DESIGN OF THREE-PHASE AC POWER ELECTRONICS CONVERTERS Comprehensive resource on design of power electronics converters for three-phase AC applications Design of Three-phase AC Power Electronics Converters contains a systematic discussion of the three-phase AC converter design considering various electrical, thermal, and mechanical subsystems and functions. Focusing on establishing converter components and subsystems models needed for the design, the text demonstrates example designs for these subsystems and for the whole three-phase AC converters considering interactions among subsystems. The design methods apply to different applications and topologies. The text presents the basics of the three-phase AC converter, its design, and the goal and organization of the book, focusing on the characteristics and models important to the converter design for components commonly used in three-phase AC converters. The authors present the design of subsystems, including passive rectifiers, inverters and active rectifiers, electromagnetic interference (EMI) filters, thermal management system, control and auxiliaries, mechanical system, and application considerations, and discuss design optimization, which presents methodology to achieve optimal design results for three-phase AC converters. Specific sample topics covered in Design of Three-phase AC Power Electronics Converters include: Models and characteristics for devices most commonly used in three-phase converters, including conventional Si devices, and emerging SiC and GaN devices Models and selection of various capacitors; characteristics and design of magnetics using different types of magnetic cores, with a focus on inductors Optimal three-phase AC converter design including design and selection of devices, AC line inductors, DC bus capacitors, EMI filters, heatsinks, and control. The design considers both steady-state and transient conditions Load and source impact converter design, such as motors and grid condition impacts For researchers and graduate students in power electronics, along with practicing engineers working in the area of three-phase AC converters, Design of Three-phase AC Power Electronics Converters serves as an essential resource for the subject and may be used as a textbook or industry reference.

Download or read book High Frequency Conducted Emission in AC Motor Drives Fed By Frequency Converters written by Jaroslaw Luszcz and published by John Wiley & Sons. This book was released on 2018-07-11 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a concise and thorough reference for designing electrical and electronic systems that employ adjustable speed drives Electrical and electronic systems that employ adjustable speed drives are being increasingly used in present-day automation applications. They are considered by many application engineers as one of the most interfering components, especially in a contemporarily faced industrial environment. This book fills the gap between the high-level academic knowledge in the electromagnetic compatibility (EMC) field and the recommended practical rules for assuring electromagnetic compatibility margin. It focuses on finding and formulating the issues that often occur with the generation and propagation of conducted emission in AC motor drives fed by frequency converters, rather than proposing specific solutions for dealing with them. It also features explanations of selected academic backgrounds of EMC and presents practical case studies. The book starts with an introduction to conducted emission in adjustable speed drives. It then goes on to offer in-depth chapters covering conducted emission origins in switch-mode power converters; conducted emission generation by frequency converter in adjustable speed drives (ASD); propagation of motor side originated conducted emission towards the power grid; modeling of conducted emission in ASD; broadband behavior of ASD components; and impact of a motor feeding cable on CM currents generated in ASD. In addition, this resource: Presents state-of-the-art analysis of undesirable high frequency phenomena accompanying AC motor speed control Discusses the fundamentals of phenomena of electromagnetic interference (EMI) generation in switch mode static converters Provides methodology of modeling-conducted EMI generation and propagation in ASD High Frequency Conducted Emission in AC Motor Drives Fed By Frequency Converters: Sources and Propagation Paths will appeal to scholars and a wide range of professionals who are involved in the stages of development, design, and application of adjustable speed drives in accordance with ever-increasing EMC requirements.

Download or read book Applications of Power Electronics written by Frede Blaabjerg and published by MDPI. This book was released on 2019-06-24 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power electronics technology is still an emerging technology, and it has found its way into many applications, from renewable energy generation (i.e., wind power and solar power) to electrical vehicles (EVs), biomedical devices, and small appliances, such as laptop chargers. In the near future, electrical energy will be provided and handled by power electronics and consumed through power electronics; this not only will intensify the role of power electronics technology in power conversion processes, but also implies that power systems are undergoing a paradigm shift, from centralized distribution to distributed generation. Today, more than 1000 GW of renewable energy generation sources (photovoltaic (PV) and wind) have been installed, all of which are handled by power electronics technology. The main aim of this book is to highlight and address recent breakthroughs in the range of emerging applications in power electronics and in harmonic and electromagnetic interference (EMI) issues at device and system levels as discussed in ‎robust and reliable power electronics technologies, including fault prognosis and diagnosis technique stability of grid-connected converters and ‎smart control of power electronics in devices, microgrids, and at system levels.

Download or read book EMI Filter Design written by Richard Lee Ozenbaugh and published by CRC Press. This book was released on 2000-11-09 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering simple methods of measuring AC and DC power lines, this highly popular, revised and expanded reference describes the selection of cores, capacitors, mechanical shapes, and styles for the timeliest design, construction, and testing of filters. It presents analyses of matrices of various filter types based on close approximations, observation, and trial and error. Supplying simple parameters and techniques for creating manufacturable, repeatable products, the second edition provides insights into the cause and elimination of common mode noise in lines and equipment, explores new data on spike, pulse, trapezoid, and quasisquare waves, and reviews the latest high-current filters.

Download or read book Proceedings of the 8th International Conference on Sciences of Electronics Technologies of Information and Telecommunications SETIT 18 Vol 2 written by Med Salim Bouhlel and published by Springer. This book was released on 2019-08-01 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume book presents an unusually diverse selection of research papers, covering all major topics in the fields of information and communication technologies and related sciences. It provides a wide-angle snapshot of current themes in information and power engineering, pursuing a cross-disciplinary approach to do so. The book gathers revised contributions that were presented at the 2018 International Conference: Sciences of Electronics, Technologies of Information and Telecommunication (SETIT'18), held on 20–22 December 2018 in Hammamet, Tunisia. This eighth installment of the event attracted a wealth of submissions, and the papers presented here were selected by a committee of experts and underwent additional, painstaking revision. Topics covered include: · Information Processing · Human-Machine Interaction · Computer Science · Telecommunications and Networks · Signal Processing · Electronics · Image and Video This broad-scoped approach is becoming increasingly popular in scientific publishing. Its aim is to encourage scholars and professionals to overcome disciplinary barriers, as demanded by current trends in the industry and in the consumer market, which are rapidly leading toward a convergence of data-driven applications, computation, telecommunication, and energy awareness. Given its coverage, the book will benefit graduate students, researchers and practitioners who need to keep up with the latest technological advances.

Download or read book Power Electronics in Renewable Energy Systems and Smart Grid written by Bimal K. Bose and published by John Wiley & Sons. This book was released on 2019-06-27 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: The comprehensive and authoritative guide to power electronics in renewable energy systems Power electronics plays a significant role in modern industrial automation and high- efficiency energy systems. With contributions from an international group of noted experts, Power Electronics in Renewable Energy Systems and Smart Grid: Technology and Applications offers a comprehensive review of the technology and applications of power electronics in renewable energy systems and smart grids. The authors cover information on a variety of energy systems including wind, solar, ocean, and geothermal energy systems as well as fuel cell systems and bulk energy storage systems. They also examine smart grid elements, modeling, simulation, control, and AI applications. The book's twelve chapters offer an application-oriented and tutorial viewpoint and also contain technology status review. In addition, the book contains illustrative examples of applications and discussions of future perspectives. This important resource: Includes descriptions of power semiconductor devices, two level and multilevel converters, HVDC systems, FACTS, and more Offers discussions on various energy systems such as wind, solar, ocean, and geothermal energy systems, and also fuel cell systems and bulk energy storage systems Explores smart grid elements, modeling, simulation, control, and AI applications Contains state-of-the-art technologies and future perspectives Provides the expertise of international authorities in the field Written for graduate students, professors in power electronics, and industry engineers, Power Electronics in Renewable Energy Systems and Smart Grid: Technology and Applications offers an up-to-date guide to technology and applications of a wide-range of power electronics in energy systems and smart grids.

Download or read book High Frequency Magnetic Components written by Marian K. Kazimierczuk and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you are looking for a complete study of the fundamental concepts in magnetic theory, read this book. No other textbook covers magnetic components of inductors and transformers for high-frequency applications in detail. This unique text examines design techniques of the major types of inductors and transformers used for a wide variety of high-frequency applications including switching-mode power supplies (SMPS) and resonant circuits. It describes skin effect and proximity effect in detail to provide you with a sound understanding of high-frequency phenomena. As well as this, you will discover thorough coverage on: integrated inductors and the self-capacitance of inductors and transformers, with expressions for self-capacitances in magnetic components; criteria for selecting the core material, as well as core shape and size, and an evaluation of soft ferromagnetic materials used for magnetic cores; winding resistance at high frequencies; expressions for winding and core power losses when non-sinusoidal inductor or transformer current waveforms contain harmonics. Case studies, practical design examples and procedures (using the area product method and the geometry coefficient method) are expertly combined with concept-orientated explanations and student-friendly analysis. Supplied at the end of each chapter are summaries of the key concepts, review questions, and problems, the answers to which are available in a separate solutions manual. Such features make this a fantastic textbook for graduates, senior level undergraduates and professors in the area of power electronics in addition to electrical and computer engineering. This is also an inimitable reference guide for design engineers of power electronics circuits, high-frequency transformers and inductors in areas such as (SMPS) and RF power amplifiers and circuits.

Download or read book Modular Multilevel Converters written by Sixing Du and published by John Wiley & Sons. This book was released on 2018-02-22 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: An invaluable academic reference for the area of high-power converters, covering all the latest developments in the field High-power multilevel converters are well known in industry and academia as one of the preferred choices for efficient power conversion. Over the past decade, several power converters have been developed and commercialized in the form of standard and customized products that power a wide range of industrial applications. Currently, the modular multilevel converter is a fast-growing technology and has received wide acceptance from both industry and academia. Providing adequate technical background for graduate- and undergraduate-level teaching, this book includes a comprehensive analysis of the conventional and advanced modular multilevel converters employed in motor drives, HVDC systems, and power quality improvement. Modular Multilevel Converters: Analysis, Control, and Applications provides an overview of high-power converters, reference frame theory, classical control methods, pulse width modulation schemes, advanced model predictive control methods, modeling of ac drives, advanced drive control schemes, modeling and control of HVDC systems, active and reactive power control, power quality problems, reactive power, harmonics and unbalance compensation, modeling and control of static synchronous compensators (STATCOM) and unified power quality compensators. Furthermore, this book: Explores technical challenges, modeling, and control of various modular multilevel converters in a wide range of applications such as transformer and transformerless motor drives, high voltage direct current transmission systems, and power quality improvement Reflects the latest developments in high-power converters in medium-voltage motor drive systems Offers design guidance with tables, charts graphs, and MATLAB simulations Modular Multilevel Converters: Analysis, Control, and Applications is a valuable reference book for academic researchers, practicing engineers, and other professionals in the field of high power converters. It also serves well as a textbook for graduate-level students.

Download or read book Autonomous Control of Unmanned Aerial Vehicles written by Victor Becerra and published by MDPI. This book was released on 2019-06-24 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unmanned aerial vehicles (UAVs) are being increasingly used in different applications in both military and civilian domains. These applications include surveillance, reconnaissance, remote sensing, target acquisition, border patrol, infrastructure monitoring, aerial imaging, industrial inspection, and emergency medical aid. Vehicles that can be considered autonomous must be able to make decisions and react to events without direct intervention by humans. Although some UAVs are able to perform increasingly complex autonomous manoeuvres, most UAVs are not fully autonomous; instead, they are mostly operated remotely by humans. To make UAVs fully autonomous, many technological and algorithmic developments are still required. For instance, UAVs will need to improve their sensing of obstacles and subsequent avoidance. This becomes particularly important as autonomous UAVs start to operate in civilian airspaces that are occupied by other aircraft. The aim of this volume is to bring together the work of leading researchers and practitioners in the field of unmanned aerial vehicles with a common interest in their autonomy. The contributions that are part of this volume present key challenges associated with the autonomous control of unmanned aerial vehicles, and propose solution methodologies to address such challenges, analyse the proposed methodologies, and evaluate their performance.

Download or read book High Performance Control of AC Drives with Matlab Simulink Models written by Haitham Abu-Rub and published by John Wiley & Sons. This book was released on 2012-04-13 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to understanding AC machines with exhaustive simulation models to practice design and control Nearly seventy percent of the electricity generated worldwide is used by electrical motors. Worldwide, huge research efforts are being made to develop commercially viable three- and multi-phase motor drive systems that are economically and technically feasible. Focusing on the most popular AC machines used in industry – induction machine and permanent magnet synchronous machine – this book illustrates advanced control techniques and topologies in practice and recently deployed. Examples are drawn from important techniques including Vector Control, Direct Torque Control, Nonlinear Control, Predictive Control, multi-phase drives and multilevel inverters. Key features include: systematic coverage of the advanced concepts of AC motor drives with and without output filter; discussion on the modelling, analysis and control of three- and multi-phase AC machine drives, including the recently developed multi-phase-phase drive system and double fed induction machine; description of model predictive control applied to power converters and AC drives, illustrated together with their simulation models; end-of-chapter questions, with answers and PowerPoint slides available on the companion website www.wiley.com/go/aburub_control This book integrates a diverse range of topics into one useful volume, including most the latest developments. It provides an effective guideline for students and professionals on many vital electric drives aspects. It is an advanced textbook for final year undergraduate and graduate students, and researchers in power electronics, electric drives and motor control. It is also a handy tool for specialists and practicing engineers wanting to develop and verify their own algorithms and techniques.

Download or read book Multiphysics Simulation by Design for Electrical Machines Power Electronics and Drives written by Marius Rosu and published by John Wiley & Sons. This book was released on 2017-12-18 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents applied theory and advanced simulation techniques for electric machines and drives This book combines the knowledge of experts from both academia and the software industry to present theories of multiphysics simulation by design for electrical machines, power electronics, and drives. The comprehensive design approach described within supports new applications required by technologies sustaining high drive efficiency. The highlighted framework considers the electric machine at the heart of the entire electric drive. The book also emphasizes the simulation by design concept—a concept that frames the entire highlighted design methodology, which is described and illustrated by various advanced simulation technologies. Multiphysics Simulation by Design for Electrical Machines, Power Electronics and Drives begins with the basics of electrical machine design and manufacturing tolerances. It also discusses fundamental aspects of the state of the art design process and includes examples from industrial practice. It explains FEM-based analysis techniques for electrical machine design—providing details on how it can be employed in ANSYS Maxwell software. In addition, the book covers advanced magnetic material modeling capabilities employed in numerical computation; thermal analysis; automated optimization for electric machines; and power electronics and drive systems. This valuable resource: Delivers the multi-physics know-how based on practical electric machine design methodologies Provides an extensive overview of electric machine design optimization and its integration with power electronics and drives Incorporates case studies from industrial practice and research and development projects Multiphysics Simulation by Design for Electrical Machines, Power Electronics and Drives is an incredibly helpful book for design engineers, application and system engineers, and technical professionals. It will also benefit graduate engineering students with a strong interest in electric machines and drives.

Download or read book High Performance Control of AC Drives with Matlab Simulink written by Haitham Abu-Rub and published by John Wiley & Sons. This book was released on 2021-04-06 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Performance Control of AC Drives with Matlab®/Simulink Explore this indispensable update to a popular graduate text on electric drive techniques and the latest converters used in industry The Second Edition of High Performance Control of AC Drives with Matlab®/Simulink delivers an updated and thorough overview of topics central to the understanding of AC motor drive systems. The book includes new material on medium voltage drives, covering state-of-the-art technologies and challenges in the industrial drive system, as well as their components, and control, current source inverter-based drives, PWM techniques for multilevel inverters, and low switching frequency modulation for voltage source inverters. This book covers three-phase and multiphase (more than three-phase) motor drives including their control and practical problems faced in the field (e.g., adding LC filters in the output of a feeding converter), are considered. The new edition contains links to Matlab®/Simulink models and PowerPoint slides ideal for teaching and understanding the material contained within the book. Readers will also benefit from the inclusion of: A thorough introduction to high performance drives, including the challenges and requirements for electric drives and medium voltage industrial applications An exploration of mathematical and simulation models of AC machines, including DC motors and squirrel cage induction motors A treatment of pulse width modulation of power electronic DC-AC converter, including the classification of PWM schemes for voltage source and current source inverters Examinations of harmonic injection PWM and field-oriented control of AC machines Voltage source and current source inverter-fed drives and their control Modelling and control of multiphase motor drive system Supported with a companion website hosting online resources. Perfect for senior undergraduate, MSc and PhD students in power electronics and electric drives, High Performance Control of AC Drives with Matlab®/Simulink will also earn a place in the libraries of researchers working in the field of AC motor drives and power electronics engineers in industry.

Download or read book Energy Efficiency in Motor Driven Systems written by Francesco Parasiliti and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports the state of the art of energy-efficient electrical motor driven system technologies, which can be used now and in the near future to achieve significant and cost-effective energy savings. It includes the recent developments in advanced electrical motor end-use devices (pumps, fans and compressors) by some of the largest manufacturers. Policies and programs to promote the large scale penetration of energy-efficient technologies and the market transformation are featured in the book, describing the experiences carried out in different parts of the world. This extensive coverage includes contributions from relevant institutions in the Europe, North America, Latin America, Africa, Asia, Australia and New Zealand.

Download or read book Power Electronics Design written by Keith H. Sueker and published by Elsevier. This book was released on 2005-08-09 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wealth of practical design information ... the next-best-thing to having a mentor with a quarter-century of experience!

Download or read book Wide Bandgap Semiconductor Power Devices written by B. Jayant Baliga and published by Woodhead Publishing. This book was released on 2018-10-17 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wide Bandgap Semiconductor Power Devices: Materials, Physics, Design and Applications provides readers with a single resource on why these devices are superior to existing silicon devices. The book lays the groundwork for an understanding of an array of applications and anticipated benefits in energy savings. Authored by the Founder of the Power Semiconductor Research Center at North Carolina State University (and creator of the IGBT device), Dr. B. Jayant Baliga is one of the highest regarded experts in the field. He thus leads this team who comprehensively review the materials, device physics, design considerations and relevant applications discussed. - Comprehensively covers power electronic devices, including materials (both gallium nitride and silicon carbide), physics, design considerations, and the most promising applications - Addresses the key challenges towards the realization of wide bandgap power electronic devices, including materials defects, performance and reliability - Provides the benefits of wide bandgap semiconductors, including opportunities for cost reduction and social impact

Download or read book Introduction to Modern Power Electronics written by Andrzej M. Trzynadlowski and published by John Wiley & Sons. This book was released on 2015-10-19 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of the basic principles and methods of electric power conversion and the latest developments in the field This book constitutes a comprehensive overview of the modern power electronics. Various semiconductor power switches are described, complementary components and systems are presented, and power electronic converters that process power for a variety of applications are explained in detail. This third edition updates all chapters, including new concepts in modern power electronics. New to this edition is extended coverage of matrix converters, multilevel inverters, and applications of the Z-source in cascaded power converters. The book is accompanied by a website hosting an instructor’s manual, a PowerPoint presentation, and a set of PSpice files for simulation of a variety of power electronic converters. Introduction to Modern Power Electronics, Third Edition: Discusses power conversion types: ac-to-dc, ac-to-ac, dc-to-dc, and dc-to-ac Reviews advanced control methods used in today’s power electronic converters Includes an extensive body of examples, exercises, computer assignments, and simulations Introduction to Modern Power Electronics, Third Edition is written for undergraduate and graduate engineering students interested in modern power electronics and renewable energy systems. The book can also serve as a reference tool for practicing electrical and industrial engineers.