Download or read book Fatigue of Materials at Very High Numbers of Loading Cycles written by Hans-Jürgen Christ and published by Springer Spektrum. This book was released on 2018-12-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents the final reports of the scientific projects funded within the DFG-SPP1466 and, hence, provides the reader with the possibility to familiarize with the leading edge of VHCF research. It draws a balance on the existing knowledge and its enhancement by the joint research action of the priority program. Three different material classes are dealt with: structural metallic materials, long-fiber-reinforced polymers and materials used in micro-electro-mechanical systems. The project topics address the development of suitable experimental techniques for high-frequency testing and damage monitoring, the characterization of damage mechanisms and damage evolution, the development of mechanism-based models and the transfer of the obtained knowledge and understanding into engineering regulations and applications.
Download or read book Multiaxial Fatigue written by Darrell Socie and published by SAE International. This book was released on 1999-12-15 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practicing engineers, researchers, and students with a working knowledge of the fatigue design process and models under multiaxial states of stress and strain. Readers are introduced to the important considerations of multiaxial fatigue that differentiate it from uniaxial fatigue.
Download or read book High Cycle Metal Fatigue written by Ky Dang Van and published by Springer. This book was released on 2014-05-04 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the high-cycle fatigue behaviour of metal components, thus covering essential needs of current industrial design. The new developments included in the book rely on the use of the mesoscopic scale approach in metal fatigue and allow the specific handling of such difficult fatigue problems as multiaxial, non-proportional loading conditions.
Download or read book Ultra low Cycle Fatigue Failure of Metal Structures under Strong Earthquakes written by Liang-Jiu Jia and published by Springer. This book was released on 2018-11-02 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents experimental results and theoretical advances in the field of ultra-low-cycle fatigue failure of metal structures under strong earthquakes, where the dominant failure mechanism is ductile fracture. Studies on ultra-low-cycle fatigue failure of metal materials and structures have caught the interest of engineers and researchers from various disciplines, such as material, civil and mechanical engineering. Pursuing a holistic approach, the book establishes a fundamental framework for this topic, while also highlighting the importance of theoretical analysis and experimental results in the fracture evaluation of metal structures under seismic loading. Accordingly, it offers a valuable resource for undergraduate and graduate students interested in ultra-low-cycle fatigue, researchers investigating steel and aluminum structures, and structural engineers working on applications related to cyclic large plastic loading conditions.
Download or read book High Cycle Fatigue written by Theodore Nicholas and published by Elsevier. This book was released on 2006-07-07 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr Theodore Nicholas ran the High Cycle Fatigue Program for the US Air Force between 1995 and 2003 at Wright-Patterson Air Force Base, and is one of the world's leading authorities on the subject, having authored over 250 papers in leading archival journals and books. Bringing his plethora of expertise to this book, Dr Nicholas discusses the subject of high cycle fatigue (HCF) from an engineering viewpoint in response to a series of HCF failures in the USAF and the concurrent realization that HCF failures in general were taking place universally in both civilian and military engines. Topic covered include: - Constant life diagrams - Fatigue limits under combined LCF and HCF - Notch fatigue under HCF conditions - Foreign object damage (FOD) - Brings years of the Author's US Air Force experience in high cycle fatigue together in one text - Discusses HCF in the context of recent international military and civilian engine failures
Download or read book Introduction to Unified Mechanics Theory with Applications written by Cemal Basaran and published by Springer Nature. This book was released on 2021-02-02 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text describes the mathematical formulation and proof of the unified mechanics theory (UMT) which is based on the unification of Newton’s laws and the laws of thermodynamics. It also presents formulations and experimental verifications of the theory for thermal, mechanical, electrical, corrosion, chemical and fatigue loads, and it discusses why the original universal laws of motion proposed by Isaac Newton in 1687 are incomplete. The author provides concrete examples, such as how Newton’s second law, F = ma, gives the initial acceleration of a soccer ball kicked by a player, but does not tell us how and when the ball would come to a stop. Over the course of Introduction to Unified Mechanics Theory, Dr. Basaran illustrates that Newtonian mechanics does not account for the thermodynamic changes happening in a system over its usable lifetime. And in this context, this book explains how to design a system to perform its intended functions safely over its usable life time and predicts the expected lifetime of the system without using empirical models, a process currently done using Newtonian mechanics and empirical degradation/failure/fatigue models which are curve-fit to test data. Written as a textbook suitable for upper-level undergraduate mechanics courses, as well as first year graduate level courses, this book is the result of over 25 years of scientific activity with the contribution of dozens of scientists from around the world including USA, Russia, Ukraine, Belarus, Spain, China, India and U.K.
Download or read book Fatigue and Corrosion in Metals written by Pietro Paolo Milella and published by Springer Nature. This book was released on with total page 965 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue and Durability of Metals at High Temperatures written by S. S. Manson and published by ASM International. This book was released on 2009 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: From concept to application, this book describes the method of strain-range partitioning for analyzing time-dependent fatigue. Creep (time-dependent) deformation is first introduced for monotonic and cyclic loading. Multiple chapters then discuss strain-range partitioning in details for multi-axial loading conditions and how different loading permutations can lead to different micro-mechanistic effects. Notably, the total-strain method of strain-range partitioning (SRP) is described, which is a methodology that sees use in several industries. Examples from aerospace illustrate applications, and methods for predicting time-dependent metal fatigue are critiqued.
Download or read book Low Cycle Fatigue and Elasto Plastic Behaviour of Materials written by P.D. Portella and published by Elsevier. This book was released on 1998-09-30 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 4th International Conference on Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials was held from 7-11 September 1998 in Garmisch-Partenkirchen, Germany. In response to a call for papers, nearly 200 extended abstracts from 32 countries were submitted to the organizing committee. These papers were presented at the conference as invited lectures or short contributions and as oral or poster presentation. All the papers were presented in poster form in extended poster sessions–a peculiarity of the LCF Conferences which allows an intense, thorough discussion of all contributions. Each chapter provides a comprehensive overview of a materials class or a given subject. Many contributions could have been included in two or even three chapters and so, in order to give a better overview of the content, the reader will find a subject index, a material index and an author index in the back of the book.
Download or read book Metal Fatigue Effects of Small Defects and Nonmetallic Inclusions written by Yukitaka Murakami and published by Elsevier. This book was released on 2002-04-29 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal fatigue is an essential consideration for engineers and researchers who are looking at factors that cause metals to fail through stress, corrosion, etc. This is an English translation of a book originally published in Japan in 1993, with an additional two chapters on the fatigue failure of steels and the effect of surface roughness on fatigue strength. The methodology is based on important and reliable results and may be usefully applied to other fatigue problems not directly treated in this book.
Download or read book Alloy Steel written by Eduardo Valencia Morales and published by BoD – Books on Demand. This book was released on 2011-12-22 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sections in this book are devoted to new approaches and usages of stainless steels, the influence of the environments on the behavior of certain classes of steels, new structural concepts to understand some fatigue processes, new insight on strengthening mechanisms, and toughness in microalloyed steels. The kinetics during tempering in low-alloy steels is also discussed through a new set-up that uses a modified Avrami formalism.
Download or read book Gigacycle Fatigue in Mechanical Practice written by Claude Bathias and published by CRC Press. This book was released on 2004-09-13 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by pioneers in the study and analysis of very high cycle fatigue this text brings together the most recent findings on gigacycle fatigue phenomena, focusing on improving the reliability and performance of key engine and machine components. This reference reflects the explosion of new concepts, testing methods, and data on very high cycle fa
Download or read book Elements of Metallurgy and Engineering Alloys written by Flake C. Campbell and published by ASM International. This book was released on 2008-01-01 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical reference provides thorough and systematic coverage on both basic metallurgy and the practical engineering aspects of metallic material selection and application.
Download or read book Fatigue of Structures and Materials written by J. Schijve and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.
Download or read book Handbook of Mechanics of Materials written by Siegfried Schmauder and published by Springer. This book was released on 2019-05-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive reference for the studies of mechanical properties of materials over multiple length and time scales. The topics include nanomechanics, micromechanics, continuum mechanics, mechanical property measurements, and materials design. The handbook employs a consistent and systematic approach offering readers a user friendly reference ideal for frequent consultation. It is appropriate for an audience at of graduate students, faculties, researchers, and professionals in the fields of Materials Science, Mechanical Engineering, Civil Engineering, Engineering Mechanics, and Aerospace Engineering.
Download or read book Fundamentals of Metal Fatigue Analysis written by Julie A. Bannantine and published by Pearson. This book was released on 1990 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to present current methods and techniques of fatigue analysis, with a focus on developing basic skills for selecting appropriate analytical techniques. Contains numerous worked examples, chapter summaries, and problems. (vs. Fuchs/Stevens).
Download or read book Cyclic Plasticity and Low Cycle Fatigue Life of Metals written by Jaroslav Polák and published by . This book was released on 1991 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt:
