Download or read book High Cycle Fatigue Behavior of a Nicalon tm Si N C Composite written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-09-25 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elevated temperature, high-cycle fatigue behavior of a woven SiC/Si-N-C ceramic matrix composite system was investigated at 910 C. High frequency (100 Hz) fatigue tests were conducted in air on specimens machined from the composite system, A power-law type fatigue life relationship adequately characterized the high-cycle fatigue data generated in the study. Post failure fractographic and metallographic studies were performed to document the fatigue crack initiation regions and damage mechanisms in the composite system. Fatigue cracks initiated primarily from the corners of the specimens and propagated along the 90 degree fiber tows. Verrilli, Michael J. and Kalluri, Sreeramesh and Kantzos, Peter T. Glenn Research Center NASA/TM-1999-209383, E-11810, NAS 1.15:209383
Download or read book Analysis and Performance of Fiber Composites written by Bhagwan D. Agarwal and published by Wiley-Interscience. This book was released on 1990-10-08 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having fully established themselves as workable engineering materials, composite materials are now increasingly commonplace around the world. Serves as both a text and reference guide to the behavior of composite materials in different engineering applications. Revised for this Second Edition, the text includes a general discussion of composites as material, practical aspects of design and performance, and further analysis that will be helpful to those engaged in research on composites. Each chapter closes with references for further reading and a set of problems that will be useful in developing a better understanding of the subject.
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Download or read book Fatigue under Thermal and Mechanical Loading Mechanisms Mechanics and Modelling written by J. Bressers and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium "Fatigue under Thermal and Mechanical Loading", held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies.
Download or read book Composite Materials written by Krishan K. Chawla and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the relationship between structure and properties, this is a well-balanced treatment of the mechanics and the materials science of composites, while not neglecting the importance of processing. This updated second edition contains new chapters on fatigue and creep of composites, and describes in detail how the various reinforcements, the materials in which they are embedded, and of the interfaces between them, control the properties of the composite materials at both the micro- and macro-levels. Extensive use is made of micrographs and line drawings, and examples of practical applications in various fields are given throughout the book, together with extensive references to the literature. Intended for use in graduate and upper-division undergraduate courses, this book will also prove a useful reference for practising engineers and researchers in industry and academia.
Download or read book Mechanical Properties of Ceramics written by John B. Wachtman and published by John Wiley & Sons. This book was released on 2009-08-13 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive and Self-Contained Treatment of the Theory and Practical Applications of Ceramic Materials When failure occurs in ceramic materials, it is often catastrophic, instantaneous, and total. Now in its Second Edition, this important book arms readers with a thorough and accurate understanding of the causes of these failures and how to design ceramics for failure avoidance. It systematically covers: Stress and strain Types of mechanical behavior Strength of defect-free solids Linear elastic fracture mechanics Measurements of elasticity, strength, and fracture toughness Subcritical crack propagation Toughening mechanisms in ceramics Effects of microstructure on toughness and strength Cyclic fatigue of ceramics Thermal stress and thermal shock in ceramics Fractography Dislocation and plastic deformation in ceramics Creep and superplasticity of ceramics Creep rupture at high temperatures and safe life design Hardness and wear And more While maintaining the first edition's reputation for being an indispensable professional resource, this new edition has been updated with sketches, explanations, figures, tables, summaries, and problem sets to make it more student-friendly as a textbook in undergraduate and graduate courses on the mechanical properties of ceramics.
Download or read book Metal and Ceramic Matrix Composites written by Brian Cantor and published by CRC Press. This book was released on 2003-11-01 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from leading experts in their respective fields, Metal and Ceramic Matrix Composites provides a comprehensive overview of topics on specific materials and trends. It is a subject regularly included as a final year option in materials science courses and is also of much industrial and academic interest. The book begins wit
Download or read book Metal Matrix Composites written by Nikhilesh Chawla and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few years, a significant increase in applications of MMCs has taken place, particularly in the areas of automotive, aerospace, electronics, and recreation. These include continuous fiber reinforced MMCs for cables in power transmission, high temperature superconducting wires, particulate MMCs in civilian aircraft and automotive applications, and high volume fraction, high thermal conductivity substrates for electronic packaging. Nevertheless, as with any novel material systems, there is a lack of fundamental understanding on the part of practicing engineers and designers. This book would seek to address these issues, in a thorough and cohesive manner, as well as to provide students and scientists with a basic understanding of MMCs. This book will emphasize the synergistic relationships among processing, structure, and properties of metal matrix composites.
Download or read book Metal Matrix Composites in Industry written by Alexander Evans and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal matrix composites are making tangible inroads into the "real" world of engineering. They are used in engineering components such as brake rotors, aircraft parts, combustion engines, and heat sinks for electronic systems. Yet, outside a relatively limited circle of specialists, these materials are mostly unknown. Designers do not as a rule think of using these materials, in part because access to information is difficult as these materials have not really entered engineering handbooks. Metal Matrix Composites in Industry is thus useful to engineers who wish to gain introductory knowledge of these materials and who want to know where "to find" them. Additionally, it provides researchers and academics with a survey of current industrial activity in this area of technology.
Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.
Download or read book The Handbook of Advanced Materials written by and published by John Wiley & Sons. This book was released on 2004-04-27 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to educate readers about recent advances in the area of new materials used in making products. Materials and their properties usually limit the component designer. * Presents information about all of these advanced materials that enable products to be designed in a new way * Provides a cost effective way for the design engineer to become acquainted with new materials * The material expert benefits by being aware of the latest development in all these areas so he/she can focus on further improvements
Download or read book Advanced Technology for Design and Fabrication of Composite Materials and Structures written by George C. Sih and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last decade has seen a significant growth in the processing and fabrication of advanced composite materials. This volume contains the up-to-date contributions of those with working experience in the automotive, marine, aerospace and construction field. Starting with modern technologies concerned with assessing the change in material microstructure in terms of the processing parameters, methodologies are offered to account for tradeoffs between the fundamental variables such as temperature and pressure that control the product quality. The book contains new ideas and data, not available in the open literature.
Download or read book Handbook of Carbon Graphite Diamonds and Fullerenes written by Hugh O. Pierson and published by William Andrew. This book was released on 2012-12-02 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a review of the science and technology of the element carbon and its allotropes: graphite, diamond and the fullerenes. This field has expanded greatly in the last three decades stimulated by many major discoveries such as carbon fibers, low-pressure diamond, and the fullerenes. The need for such a book has been felt for some time. These carbon materials are very different in structure and properties. Some are very old (charcoal), others brand new (the fullerenes). They have different applications and markets and are produced by different segments of the industry.Few studies are available that attempt to review the entire field of carbon as a whole discipline. Moreover these studies were written several decades ago and a generally outdated since the development of the technology is moving very rapidly and scope of applications is constantly expanding and reaching into new fields such as aerospace, automotive, semiconductors, optics, and electronics. In this book the author provides a valuable, up-to-date account of both the newer and traditional forms of carbon, both naturally occurring and man-made. This volume will be a valuable resource for both specialists in, and occasional users of carbon materials.
Download or read book Handbook of Technical Textiles written by A. Richard Horrocks and published by Woodhead Publishing. This book was released on 2015-12-01 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Handbook of Technical Textiles, Volume 1: Technical Textile Processes provides readers with a comprehensive understanding of the latest advancements in technical textiles. With revised and updated coverage, including several new chapters, this volume reviews recent developments and technologies in the field, beginning with an overview of the technical textiles industry that includes coverage of technical fibers and yarns, weaving, spinning, knitting, and nonwoven production. Subsequent sections include discussions on finishing, coating, and the coloration of technical textiles. - Provides a comprehensive handbook for all aspects of technical textiles - Presents updated, detailed coverage of processes, fabric structure, and applications - An ideal resource for those interested in high-performance textiles, textile processes, textile processing, and textile applications - Contains contributions from many of the original, recognized experts from the first edition who update their respective chapters
Download or read book Structural Composite Materials written by F. C. Campbell and published by ASM International. This book was released on 2010-01-01 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with all aspects of advanced composite materials; what they are, where they are used, how they are made, their properties, how they are designed and analyzed, and how they perform in-service. It covers both continuous and discontinuous fiber composites fabricated from polymer, metal, and ceramic matrices, with an emphasis on continuous fiber polymer matrix composites.
Download or read book Fibrous Composites in Structural Design written by Edward M. Lenoe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth Conference on Fibrous Composites in Structural Design was a successor to the First-to-Third Conferences on Fibrous Composites in Flight Vehicle Design sponsored by the Air Force (First and Second Conferences, September 1973 and May 1974) and by NASA (Third Conference, November 1975) which were aimed at focusing national attention on flight vehicle applications of a new class of fiber reinforced materials, the advanced com posites, which afforded weight savings and other advantages which had not been previously available. The Fourth Conference, held at San Diego, California, 14-17 November 1978, was the fi rst of these conferences to be jointly sponsored by the Army, Navy and Ai r Force together with NASA, as well as being the first to give attention to non-aerospace applications of fiber reinforced composites. While the design technology for aerospace applications has reached a state of relative maturity, other areas of application such as mi litary bridging, flywheel energy storage systems, ship and surface vessel components and ground vehicle components are in an early stage of development, and it was an important objective to pinpoint where careful attention to structural design was needed in such applications to achfeve maximum structural performance payoff together with a high level of reliability and attractive economics.
Download or read book Engineering Ceramics written by M. Bengisu and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: A handy reference for technicians who want to understand the nature, properties and applications, of engineering ceramics. The book meets the needs of those working in the ceramics industry, as well as of technicians and engineers involved in the application of ceramic materials.
