Download or read book Reviews Of Accelerator Science And Technology Volume 7 Colliders written by Alexander Wu Chao and published by World Scientific. This book was released on 2015-02-11 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea of colliding two particle beams to fully exploit the energy of accelerated particles was first proposed by Rolf Wideröe, who in 1943 applied for a patent on the collider concept and was awarded the patent in 1953. The first three colliders — AdA in Italy, CBX in the US, and VEP-1 in the then Soviet Union — came to operation about 50 years ago in the mid-1960s. A number of other colliders followed.Over the past decades, colliders defined the energy frontier in particle physics. Different types of colliers — proton-proton, proton-antiproton, electron-positron, electron-proton, electron-ion and ion-ion colliders — have played complementary roles in fully mapping out the constituents and forces in the Standard Model (SM). We are now at a point where all predicted SM constituents of matter and forces have been found, and all the latest ones were found at colliders. Colliders also play a critical role in advancing beam physics, accelerator research and technology development. It is timely that RAST Volume 7 is dedicated to Colliders.

Download or read book Elementary Particles Accelerators and Colliders written by Ugo Amaldi and published by Springer. This book was released on 2013-03-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a historical consideration of the types and evolution of accelerators the physics of particle beams is provided in detail. Topics dealt with comprise linear and nonlinear beam dynamics, collective phenomena in beams, and interactions of beams with the surroundings. The design and principles of synchrotrons, circular and linear colliders, and of linear accelerators are discussed next. Also technological aspects of accelerators (magnets, RF cavities, cryogenics, power supply, vacuum, beam instrumentation, injection and extraction) are reviewed, as well as accelerator operation (parameter control, beam feedback system, orbit correction, luminosity optimization). After introducing the largest accelerators and colliders of their times the application of accelerators and storage rings in industry, medicine, basic science, and energy research is discussed, including also synchrotron radiation sources and spallation sources. Finally, cosmic accelerators and an outlook for the future are given.

Download or read book RF Superconductivity written by Hasan Padamsee and published by John Wiley & Sons. This book was released on 2009-03-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second book to RF Superconducting, written by one of the leading experts. The book provides fast and up-to-date access to the latest advances in the key technology for future accelerators. Experts as well as newcomers to the field will benefit from the discussion of progress in the basic science, technology as well as recent and forthcoming applications. Researchers in accelerator physics will also find much that is relevant to their discipline.

Download or read book LHC Design Report written by and published by . This book was released on 2004 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Particle Physics Reference Library written by Stephen Myers and published by Springer Nature. This book was released on 2020-01-01 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third open access volume of the handbook series deals with accelerator physics, design, technology and operations, as well as with beam optics, dynamics and diagnostics. A joint CERN-Springer initiative, the "Particle Physics Reference Library" provides revised and updated contributions based on previously published material in the well-known Landolt-Boernstein series on particle physics, accelerators and detectors (volumes 21A,B1,B2,C), which took stock of the field approximately one decade ago. Central to this new initiative is publication under full open access.

Download or read book Angiogenesis Assays written by Carolyn A. Staton and published by John Wiley & Sons. This book was released on 2007-01-11 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Angiogenesis, the development of new blood vessels from the existing vasculature, is essential for physiological growth and over 18,000 research articles have been published describing the role of angiogenesis in over 70 different diseases, including cancer, diabetic retinopathy, rheumatoid arthritis and psoriasis. One of the most important technical challenges in such studies has been finding suitable methods for assessing the effects of regulators of eh angiogenic response. While increasing numbers of angiogenesis assays are being described both in vitro and in vivo, it is often still necessary to use a combination of assays to identify the cellular and molecular events in angiogenesis and the full range of effects of a given test protein. Although the endothelial cell - its migration, proliferation, differentiation and structural rearrangement - is central to the angiogenic process, it is not the only cell type involved. the supporting cells, the extracellular matrix and the circulating blood with its cellular and humoral components also contribute. In this book, experts in the use of a diverse range of assays outline key components of these and give a critical appraisal of their strengths and weaknesses. Examples include assays for the proliferation, migration and differentiation of endothelial cells in vitro, vessel outgrowth from organ cultures, assessment of endothelial and mural cell interactions, and such in vivo assays as the chick chorioallantoic membrane, zebrafish, corneal, chamber and tumour angiogenesis models. These are followed by a critical analysis of the biological end-points currently being used in clinical trials to assess the clinical efficacy of anti-angiogenic drugs, which leads into a discussion of the direction future studies should take. This valuable book is of interest to research scientists currently working on angiogenesis in both the academic community and in the biotechnology and pharmaceutical industries. Relevant disciplines include cell and molecular biology, oncology, cardiovascular research, biotechnology, pharmacology, pathology and physiology.

Download or read book Cement Production Technology written by Anjan Kumar Chatterjee and published by CRC Press. This book was released on 2018-04-27 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is an outcome of the author’s active professional involvement in research, manufacture and consultancy in the field of cement chemistry and process engineering. This multidisciplinary title on cement production technology covers the entire process spectrum of cement production, starting from extraction and winning of natural raw materials to the finished products including the environmental impacts and research trends. The book has an overtone of practice supported by the back-up principles.

Download or read book The Epithelial to Mesenchymal Transition EMT in Cancer written by Joëlle Roche and published by MDPI. This book was released on 2018-04-09 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "The Epithelial-to-Mesenchymal Transition (EMT) in Cancer" that was published in Cancers

Download or read book Applications of Superconductivity written by H. Weinstock and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, in essence the proceedings of a NATO Advanced Study Institute with the same title, is designed to provide in-depth coverage of many, but not all, of the major current applications of superconductivity, and of many that still are being developed. It will be of value to scientists and engineers who have interests in the research and production aspects of the technology, as well as in the applications themselves. The ftrst three chapters (by Clarke, Vrba and Wikswo) are devoted to an understanding of the principles, fabrication and uses of SQUID magnetometers and gradiometers, with the greatest emphasis on biomagnetism and nondestructive evaluation (NDE). For the most part, traditional low-temperature superconductor (LTS) SQUIDs are used, but particularly for NDE, high-temperature superconductor (HTS) SQUIDs are proving useful and often more convenient. The succeeding three chapters (by Przybysz, Likharev and Chaloupka) cover broader aspects of superconducting electronics. The ftrst two of these deal primarily with digital L TS circuits, while the third discusses in great detail passive component applications using HTS materials. Currently, HTS ftlters are undergoing intense J3-site testing at cellular telephone base stations. While it is clear that HTS ftlters outperform conventional ftlters in reducing signal loss and allowing for more channels in a given bandwidth, it isn't yet certain that the cellular telephone industry sees sufficient economic beneftts to make a ftrm decision to use HTS ftlters universally in its systems. If this application is generally adapted, the market for these ftlters should be quite large.

Download or read book Luminescence Thermometry written by Miroslav Dramićanin and published by Woodhead Publishing. This book was released on 2018-04-21 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Luminescence Thermometry: Methods, Materials, and Applications presents the state-of-the art applications of luminescence thermometry, giving a detailed explanation of luminescence spectroscopic schemes for the read-out of temperature, while also describing the diverse materials that are capable of sensing temperature via luminescence. Chapters cover the fundamentals of temperature, traditional thermometers and their figures of merit, a concise description of optical thermometry methods, luminescence and instrumentation, and an explanation of the ways in which increases in temperature quench luminescence. Additional sections focus on materials utilized for luminescence thermometry and the broad range of applications for luminescence thermometry, including temperature measurement at the nanoscale and the application of multifunctional luminescent materials. - Provides an overview of luminescence thermometry applications, including high-temperature, biomedical, nanoscale and multifunctional - Delves into luminescence thermometry by materials group, including Rare-earth and transition Metal Ion Doped, Semiconductors, Quantum Dots and Organic materials - Gives a concise introduction of the latest methods of temperature measurement, including luminescence spectroscopic schemes and methods of analysis

Download or read book Handbook of Bioceramics and Biocomposites written by Iulian Vasile Antoniac and published by Springer. This book was released on 2016-05-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook describes several current trends in the development of bioceramics and biocomposites for clinical use in the repair, remodelling, and regeneration of bone tissue. Comprehensive coverage of these materials allows fundamental aspects of the science and engineering to be seen in close relation to the clinical performance of dental and orthopaedic implants. Bioceramics and biocomposites appear to be the most dynamic area of materials development for both tissue engineering and implantable medical devices. Almost all medical specialties will continue to benefit from these developments, but especially dentistry and orthopaedics. In this Handbook, leading researchers describe the use of bionanomaterials to create new functionalities when interfaced with biological molecules or structures. Also described are technologies for bioceramics and biocomposites processing in order to fabricate medical devices for clinical use. Another important section of the book is dedicated to tissue regeneration with development of new matrices. A targeted or personalized treatment device reduces drug consumption and treatment expenses, resulting in benefits to the patient and cost reductions for public health systems. This authoritative reference on the state-of-the-art in the development and use of bioceramics and biocomposites can also serve as the basis of instructional course lectures for audiences ranging from advanced undergraduate students to post-graduates in materials science and engineering and biomedical engineering.

Download or read book Stem Cells written by Ariff Bongso and published by World Scientific. This book was released on 2011 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stem cell biology has drawn tremendous interest in recent years as it promises cures for a variety of incurable diseases. This book deals with the basic and clinical aspects of stem cell research and involves work on the full spectrum of stem cells isolated today. It also covers the conversion of stem cell types into a variety of useful tissues which may be used in the future for transplantation therapy. It is thus aimed at undergraduates, postgraduates, scientists, embryologists, doctors, tissue engineers and anyone who wishes to gain some insight into stem cell biology. This book is important as it is comprehensive and covers all aspects of stem cell biology, from basic research to clinical applications. It will have 33 chapters written by renowned stem cell scientists worldwide. It will be up-to-date and all the chapters include self-explanatory figures, color photographs, graphics and tables. It will be easy to read and give the reader a complete understanding and state of the art of the exciting science and its applications.

Download or read book A Clinical Guide to the Treatment of the Human Stress Response written by George S. Jr. Everly and published by Springer Science & Business Media. This book was released on 2006-02-20 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition covers a range of new topics, including stress and the immune system, post-traumatic stress and crisis intervention, Eye Movement Desensitization and Reprocessing (EMDR), Critical Incident Stress Debriefing (CISD), Crisis Management Briefings in response to mass disasters and terrorism, Critical Incident Stress Management (CISM), spirituality and religion as stress management tools, dietary factors and stress, and updated information on psychopharmacologic intervention in the human stress response. It is a comprehensive and accessible guide for students, practitioners, and researchers in the fields of psychology, psychiatry, medicine, nursing, social work, and public health.

Download or read book Accelerator Physics Technology and Applications written by Alex Chao and published by World Scientific. This book was released on 2004 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally invented for generating the first artificial nuclear reactions, particle accelerators have undergone, during the past 80 years, a fascinating development that is an impressive example of the inventiveness and perseverance of scientists and engineers. Since the early 1980s, accelerator science and technology has been booming. Today, accelerators are the prime tool for high energy physics to probe the structure of matter to an unknown depth. They are also, as synchrotron radiation sources, the most versatile tool for characterizing materials and processes and for producing micro- and nanostructured devices. The determination of the structure of large biomolecules is presently among the best examples of the application of synchrotron radiation. Finally, accelerators have grown more and more important for medicine, which is relying on them for advanced cancer therapy and radio-surgery. And there are more applications, including the generation of neutrons for materials science, the transmutation of nuclear waste with simultaneous production of electrical power, the sterilization of medical supplies and of foodstuff, and the inspection of trucks by customs or security services. This book is meant to provide basic training in modern accelerators for students, teachers, and interested scientists and engineers working in other fields. It is a result of the 3rd International Accelerator School, held in 2002 in Singapore under the auspices of the Overseas Chinese Physics Association (OCPA). Reputable experts, including a recent prize-winner, cover the field of cyclic and linear accelerators from the basic theoretical tools to forefront developments such as the X-ray free electron laser or the latest proton therapy facilities under construction. Accelerators, the art of building them, and the science for understanding their function have become a very exciting field of research. This book conveys the excitement of the experts to the reader. The proceedings have been selected for coverage in: . OCo Index to Scientific & Technical Proceedings- (ISTP- / ISI Proceedings). OCo Index to Scientific & Technical Proceedings (ISTP CDROM version / ISI Proceedings). OCo CC Proceedings OCo Engineering & Physical Sciences."

Download or read book The Development of Colliders written by Claudio M. Pellegrini and published by Springer Science & Business Media. This book was released on 1995-01-31 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Market: Physicists, especially beam physicists and elementary particle physicists, as well as science historians and students. In the 1950s and 60s a revolution took place in our ability to handle and manipulate particle beams. This revolution cleared a path for major advances and changed forever the way matter is explored at the subnuclear level. This volume gathers together for the first time the seminal papers on the development and expansion of collider physics. Included are groundbreaking writings from Gersh Budker, Donald Kerst, Bruno Touschek, Nobel laureate Simon van der Meer, Gerry O'Neill, Ernest Courant, Keith Symon, and others. The editors, Claudio Pellegrini and Andrew Sessler, were colleagues of many of these notable contributors and witnesses to the development of virtually every machine mentioned in the book.

Download or read book Inside the Cold War written by Chris Adams and published by . This book was released on 2004-12-01 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: General Adams reflects on his experiences in the cold war, during which he served in both manned bombers and missile silos. He tells stories of famous and not-so-famous cold warriors, including some from the US Navy. Some stories are humorous; some stories are tragic. Having traveled extensively in Russia and some former Soviet Union states after retirement, General Adams tells us about his former adversaries, the Soviet cold warriors. In the process, he leaves no doubt about his respect for all who served so valiantly in the "strategic triad"-- the strategic command, the ICBM force, and the submarine Navy.

Download or read book Recent Development of Electrospinning for Drug Delivery written by Romána Zelkó and published by MDPI. This book was released on 2020-03-27 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several promising techniques have been developed to overcome the poor solubility and/or membrane permeability properties of new drug candidates, including different fiber formation methods. Electrospinning is one of the most commonly used spinning techniques for fiber formation, induced by the high voltage applied to the drug-loaded solution. With modifying the characteristics of the solution and the spinning parameters, the functionality-related properties of the formulated fibers can be finely tuned. The fiber properties (i.e., high specific surface area, porosity, and the possibility of controlling the crystalline–amorphous phase transitions of the loaded drugs) enable the improved rate and extent of solubility, causing a rapid onset of absorption. However, the enhanced molecular mobility of the amorphous drugs embedded into the fibers is also responsible for their physical–chemical instability. This Special Issue will address new developments in the area of electrospun nanofibers for drug delivery and wound healing applications, covering recent advantages and future directions in electrospun fiber formulations and scalability. Moreover, it serves to highlight and capture the contemporary progress in electrospinning techniques, with particular attention to the industrial feasibility of developing pharmaceutical dosage forms. All aspects of small molecule or biologics-loaded fibrous dosage forms, focusing on the processability, structures and functions, and stability issues, are included.