Download or read book Helium and Hydrogen Isotope Adsorption and Separation in Metal Organic Frameworks written by Ingrid Zaiser and published by Cuvillier Verlag. This book was released on 2016-10-31 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The separation of isotopes has always been a challenge because of their identical size, shape and thermodynamic properties. Nowadays, the extraction of deuterium is performed e.g. by the Girdler Sulfid process or cryogenic distillation, which lead to low separation factors (below 2.5) in combination with high energy costs. The standard way to produce helium-3 is to skim it as a byproduct of the radioactive tritium decay. In this thesis, two alternative approaches have been investigated for the separation of light isotopes, Quantum Sieving and Chemical Affinity Sieving . While Quantum Sieving is based on confinement in small pores, Chemical Affinity Sieving relies on strong adsorption sites. Both methods use the mass difference of the isotopes, which is related to their zero-point energy. The microporous metal-organic frameworks are excellent candidates for studying these quantum effects due to their well-defined pore structure and the possibility to introduce strong adsorption sites directly into the framework. The samples have been exposed to an isotope mixture and the adsorbed quantity of each isotope was detected by low-temperature thermal desorption spectroscopy (TDS). The ratio of the desorbed amount of the isotopes leads directly to the selectivity (separation factor). The selectivity is determined as a function of exposure time and temperature and exhibits the highest value of 25 observed for hydrogen isotopes at temperatures well above the boiling point of liquid nitrogen.
Download or read book Metal Organic Frameworks written by Victoria Samanidou and published by MDPI. This book was released on 2020-03-27 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal–organic frameworks are among the most promising novel materials. The concept of MOFs was first introduced in 1990. They were actually initially used in catalysis, gas separation, membranes, electrochemical sensors. Later on, they were introduced as SPE sorbents for PAHs (Polycyclic Aromatic Hydrocarbons) in environmental water samples, then the range expanded to the field of analytical chemistry, both in chromatographic separation and sample preparation, with great success in, e.g., SPE and SPME (Solid Phase Mico-extraction). Since then, the number of analytical applications implementing MOFs as sorbents in sorptive sample preparation approaches is increasing. Τhis is reinforced by the fact that, at least theoretically, an infinite number of structures can be designed and synthesized, thus making tuneability one of the most unique characteristics of MOF materials. Moreover, they have been designed in various shapes, such as columns, fibers, and films, so that they can meet more analytical challenges with improved analytical features.Their exceptional properties attracted the interest of analytical chemists who have taken advantage of the unique structures and properties and have already introduced them in several sample pretreatment techniques, such as solid phase extraction, dispersive SPE, magnetic solid phase extraction, solid phase microextraction, stir bar sorptive extraction, etc.
Download or read book Adsorption and Diffusion written by Hellmut G. Karge and published by Springer Science & Business Media. This book was released on 2008-06-17 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Molecular Sieves - Science and Technology" covers, in a comprehensive manner, the science and technology of zeolites and all related microporous and mesoporous materials. The contributions are grouped together topically in such a way that each volume deals with a specific sub-field. Volume 7 treats fundamentals and analyses of adsorption and diffusion in zeolites including single-file diffusion. Various methods of measuring adsorption and diffusion are described and discussed.
Download or read book Hydrogen Storage in Metal organic Frameworks written by Jesse Rowsell and published by . This book was released on 2005 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mixed Matrix Membranes written by Clara Casado-Coterillo and published by MDPI. This book was released on 2019-12-16 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixed matrix membranes (MMMs) have attracted a large amount of interest in research laboratories worldwide in recent decades, motivated by the gap between a growing interest in developing novel mixed matrix membranes by various research groups and the lack of large-scale implementation. This Special Issue contains six publications dealing with the current opportunities and challenges of mixed matrix membranes development and applications to solve environmental and health challenges of the society of 21st century.
Download or read book Hydrogen Storage Materials written by R.G. Barnes and published by Trans Tech Publications Ltd. This book was released on 1988-01-01 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Science Forum Vol. 31
Download or read book Gas Adsorption Equilibria written by Jürgen U. Keller and published by Springer Science & Business Media. This book was released on 2006-06-23 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to present for the first time experimental methods to measure equilibria states of pure and mixed gases being adsorbed on the surface of solid materials. It has been written for engineers and scientists from industry and academia who are interested in adsorption based gas separation processes and/or in using gas adsorption for characterization of the porosity of solid materials. This book is the result of a fruitful collaboration of a theoretician (JUK) and an experimentalist (RS) over more than twelve years in the field of gas adsorption systems at the Institute of Fluid- and Thermodynamics (IFT) at the University of Siegen, Siegen, Germany. This collaboration resulted in the development of several new methods to measure not only pure gas adsorption, but gas mixture or coadsorption equilibria on inert porous solids. Also several new theoretical results could be achieved leading to new types of so-called adsorption isotherms based on the concepts of molecular association and – phenomenologically speaking – on that of thermodynamic phases of fractal dimension. Naturally, results of international collaboration of the authors over the years (1980-2000) also are included.
Download or read book Industrial Gas Handbook written by Frank G. Kerry and published by CRC Press. This book was released on 2007-02-22 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing on Frank G. Kerry's more than 60 years of experience as a practicing engineer, the Industrial Gas Handbook: Gas Separation and Purification provides from-the-trenches advice that helps practicing engineers master and advance in the field. It offers detailed discussions and up-to-date approaches to process cycles for cryogenic separation of
Download or read book Compilation of Minimum and Maximum Isotope Ratios of Selected Elements in Naturally Occurring Terrestrial Materials and Reagents written by Tyler B. Coplen and published by . This book was released on 2002 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Documented variations in the isotopic compositions of some chemical elements are responsible for expanded uncertainties in the standard atomic weights published by the Commission on Atomic Weights and Isotopic Abundances of the International Union of Pure and Applied Chemistry. This report summarizes reported variations in the isotopic compositions of 20 elements that are due to physical and chemical fractionation processes (not due to radioactive decay) and their effects on the standard atomic weight uncertainties. For 11 of those elements (hydrogen, lithium, boron, carbon, nitrogen, oxygen, silicon, sulfur, chlorine, copper, and selenium), standard atomic weight uncertainties have been assigned values that are substantially larger than analytical uncertainties because of common isotope abundance variations in materials of natural terrestrial origin. For 2 elements (chromium and thallium), recently reported isotope abundance variations potentially are large enough to result in future expansion of their atomic weight uncertainties. For 7 elements (magnesium, calcium, iron, zinc, molybdenum, palladium, and tellurium), documented isotope-abundance variations in materials of natural terrestrial origin are too small to have a significant effect on their standard atomic weight uncertainties.
Download or read book Membranes For Gas Separations written by Carreon Moises A and published by World Scientific. This book was released on 2017-08-11 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims at illustrating several examples of different membrane compositions ranging from inorganic, polymeric, metallic, metal organic framework, and composite which have been successfully deployed to separate industrially relevant gas mixtures including hydrogen, nitrogen, methane, carbon dioxide, olefins/parafins among others. Each book chapter highlights some of the current and key fundamental and technological challenges for these membranes that must be overcome in order to envision its application at industrial level. Contents: Mixed Matrix Membranes for Gas Separation Applications (Maria Carreon, Ganpat Dahe, Jie Feng and Surendar R Venna)Ceramic-Supported Organic Composite Membranes for Gas Separation (Gongping Liu and Wanqin Jin)Molecular Modeling of MOF Membranes for Gas Separations (Ilknur Erucar and Seda Keskin)Membrane Processes for N2–CH4 Separation (Shiguang Li, Zhaowang Zong, Miao Yu and Moises A Carreon)Polymer Blend Membranes for Gas Separations (Charles J Holt, Juan P Vizuet, Inga H Musselman, Kenneth J Balkus Jr and John P Ferraris)Manipulating Polyimide Nanostructures via Cross-linking for Membrane Gas Separation (Lingxiang Zhu, Maryam Omidvar and Haiqing Lin)Dense Inorganic Membranes for Hydrogen Separation (Sean-Thomas B Lundin, Neil S Patki, Thomas F Fuerst, Sandrine Ricote, Colin A Wolden and J Douglas Way) Readership: Graduate students and professionals in the field of membranes, gas separations and chemical engineering. Membranes;Gas Separations;Zeolites;Polymers;MetalsKey Features: Covers diverse industrially relevant gas separationsIllustrates different membrane compositionsChapters devoted to both experimental and modelling studies
Download or read book Carbon Capture written by Jennifer Wilcox and published by Springer Science & Business Media. This book was released on 2012-03-28 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book approaches the energy science sub-field carbon capture with an interdisciplinary discussion based upon fundamental chemical concepts ranging from thermodynamics, combustion, kinetics, mass transfer, material properties, and the relationship between the chemistry and process of carbon capture technologies. Energy science itself is a broad field that spans many disciplines -- policy, mathematics, physical chemistry, chemical engineering, geology, materials science and mineralogy -- and the author has selected the material, as well as end-of-chapter problems and policy discussions, that provide the necessary tools to interested students.
Download or read book Porous Carbons written by Feiyu Kang and published by Elsevier. This book was released on 2021-11-04 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon materials form pores ranging in size and morphology, from micropores of less than 1nm, to macropores of more than 50nm, and from channel-like spaces with homogenous diameters in carbon nanotubes, to round spaces in various fullerene cages, including irregularly-shaped pores in polycrystalline carbon materials. The large quantity and rapid rate of absorption of various molecules made possible by these attributes of carbon materials are now used in the storage of foreign atoms and ions for energy storage, conversion and adsorption, and for environmental remediation. Porous Carbons: Syntheses and Applications focuses on the fabrication and application of porous carbons. It considers fabrication at three scales: micropores, mesopores, and macropores. Carbon foams, sponges, and 3D-structured carbons are detailed. The title presents applications in four key areas: energy storage, energy conversion, energy adsorption, including batteries, supercapacitors, and fuel cells and environmental remediation, emphasizing the importance of pore structures at the three scales, and the diffusion and storage of various ions and molecules. The book presents a short history of each technique and material, and assesses advantages and disadvantages. This focused book provides researchers with a comprehensive understanding of both pioneering and current synthesis techniques for porous carbons, and their modern applications. Presents modern porous carbon synthesis techniques and modern applications of porous carbons Presents current research on porous carbons in energy storage, conversion and adsorption, and in environmental remediation Provides a history and assessment of both pioneering and current cutting-edge synthesis techniques and materials Covers a significant range of precursor materials, preparation techniques, and characteristics Considers the future development of porous carbons and their various potential applications
Download or read book Green Technologies for the Environment written by Sherine O. Obare and published by ACS Symposium. This book was released on 2016-06-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book "Green Technologies for the Environment" brings together experts in the field of biotechnology, chemistry, chemical engineering, environmental engineering and toxicology from both academia and industry, to discuss green processes for the environment. The topics included finding replacements for crude oil to meet both our energy needs as well as the supply of chemicals for the production of essential products, advances in chemical processing, waste valorization, alternative solvents, and developments in homogeneous and heterogeneous catalysis as well as enzyme-based processes for chemical transformations. Advances in green chemistry concepts will further enhance the field through the design of new chemicals and solvents. In addition, obtaining a better understanding of the mechanistic pathways involved in various reactions is essential toward advances in the field. The goal of the work described in each of the chapters is to address the need for best practices for chemical processes and for the production of chemicals, while promoting sustainability.
Download or read book The Chemistry of the Actinide and Transactinide Elements 3rd ed Volumes 1 5 written by L.R. Morss and published by Springer Science & Business Media. This book was released on 2007-12-31 with total page 4059 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Chemistry of the Actinide and Transactinide Elements is a contemporary and definitive compilation of chemical properties of all of the actinide elements, especially of the technologically important elements uranium and plutonium, as well as the transactinide elements. In addition to the comprehensive treatment of the chemical properties of each element, ion, and compound from atomic number 89 (actinium) through to 109 (meitnerium), this multi-volume work has specialized and definitive chapters on electronic theory, optical and laser fluorescence spectroscopy, X-ray absorption spectroscopy, organoactinide chemistry, thermodynamics, magnetic properties, the metals, coordination chemistry, separations, and trace analysis. Several chapters deal with environmental science, safe handling, and biological interactions of the actinide elements. The Editors invited teams of authors, who are active practitioners and recognized experts in their specialty, to write each chapter and have endeavoured to provide a balanced and insightful treatment of these fascinating elements at the frontier of the periodic table. Because the field has expanded with new spectroscopic techniques and environmental focus, the work encompasses five volumes, each of which groups chapters on related topics. All chapters represent the current state of research in the chemistry of these elements and related fields.
Download or read book Chemisorption and Reactivity on Supported Clusters and Thin Films written by R.M. Lambert and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterogeneous catalysis provides the backbone of the world's chemical and oil industries. The innate complexity of practical catalytic systems suggests that useful progress should be achievable by investigating key aspects of catalysis by experimental studies on idealised model systems. Thin films and supported clusters are two promising types of model system that can be used for this purpose, since they mimic important aspects of the properties of practical dispersed catalysts. Similarly, appropriate theoretical studies of chemisorption and surface reaction clusters or extended slab systems can provide valuable information on the factors that underlie bonding and catalytic activity. This volume describes such experimental and theoretical approaches to the surface chemistry and catalytic behaviour of metals, metal oxides and metal/metal oxide systems. An introduction to the principles and main themes of heterogeneous catalysis is followed by detailed accounts of the application of modern experimental and theoretical techniques to fundamental problems. The application of advanced experimental methods is complemented by a full description of theoretical procedures, including Hartree-Fock, density functional and similar techniques. The relative merits of the various approaches are considered and directions for future progress are indicated.
Download or read book Plasma Chemistry written by Alexander Fridman and published by Cambridge University Press. This book was released on 2008-05-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a fundamental introduction to all aspects of modern plasma chemistry, this book describes mechanisms and kinetics of chemical processes in plasma, plasma statistics, thermodynamics, fluid mechanics and electrodynamics, as well as all major electric discharges applied in plasma chemistry. Fridman considers most of the major applications of plasma chemistry, from electronics to thermal coatings, from treatment of polymers to fuel conversion and hydrogen production and from plasma metallurgy to plasma medicine. It is helpful to engineers, scientists and students interested in plasma physics, plasma chemistry, plasma engineering and combustion, as well as chemical physics, lasers, energy systems and environmental control. The book contains an extensive database on plasma kinetics and thermodynamics and numerical formulas for practical calculations related to specific plasma-chemical processes and applications. Problems and concept questions are provided, helpful in courses related to plasma, lasers, combustion, chemical kinetics, statistics and thermodynamics, and high-temperature and high-energy fluid mechanics.
Download or read book Fiscal Year 1986 Department of Energy Authorization basic Research Programs written by United States. Congress. House. Committee on Science and Technology. Subcommittee on Energy Development and Applications and published by . This book was released on 1985 with total page 1160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
