Download or read book Heat Transfer in Multi Phase Materials written by Andreas Öchsner and published by Springer Science & Business Media. This book was released on 2011-07-18 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a profound understanding, which physical processes and mechanisms cause the heat transfer in composite and cellular materials. It shows models for all important classes of composite materials and introduces into the latest advances. In three parts, the book covers Composite Materials (Part A), Porous and Cellular Materials (Part B) and the appearance of a conjoint solid phase and fluid aggregate (Part C).
Download or read book Fundamentals of Multiphase Heat Transfer and Flow written by Amir Faghri and published by Springer Nature. This book was released on 2019-09-13 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents a modern treatment of fundamentals of heat and mass transfer in the context of all types of multiphase flows with possibility of phase-changes among solid, liquid and vapor. It serves equally as a textbook for undergraduate senior and graduate students in a wide variety of engineering disciplines including mechanical engineering, chemical engineering, material science and engineering, nuclear engineering, biomedical engineering, and environmental engineering. Multiphase Heat Transfer and Flow can also be used to teach contemporary and novel applications of heat and mass transfer. Concepts are reinforced with numerous examples and end-of-chapter problems. A solutions manual and PowerPoint presentation are available to instructors. While the book is designed for students, it is also very useful for practicing engineers working in technical areas related to both macro- and micro-scale systems that emphasize multiphase, multicomponent, and non-conventional geometries with coupled heat and mass transfer and phase change, with the possibility of full numerical simulation.
Download or read book Transport Phenomena in Multiphase Systems written by Amir Faghri and published by Academic Press. This book was released on 2006 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering students in a wide variety of engineering disciplines from mechanical and chemical to biomedical and materials engineering must master the principles of transport phenomena as an essential tool in analyzing and designing any system or systems wherein momentum, heat and mass are transferred. This textbook was developed to address that need, with a clear presentation of the fundamentals, ample problem sets to reinforce that knowledge, and tangible examples of how this knowledge is put to use in engineering design. Professional engineers, too, will find this book invaluable as reference for everything from heat exchanger design to chemical processing system design and more. * Develops an understanding of the thermal and physical behavior of multiphase systems with phase change, including microscale and porosity, for practical applications in heat transfer, bioengineering, materials science, nuclear engineering, environmental engineering, process engineering, biotechnology and nanotechnology * Brings all three forms of phase change, i.e., liquid vapor, solid liquid and solid vapor, into one volume and describes them from one perspective in the context of fundamental treatment * Presents the generalized integral and differential transport phenomena equations for multi-component multiphase systems in local instance as well as averaging formulations. The molecular approach is also discussed with the connection between microscopic and molecular approaches * Presents basic principles of analyzing transport phenomena in multiphase systems with emphasis on melting, solidification, sublimation, vapor deposition, condensation, evaporation, boiling and two-phase flow heat transfer at the micro and macro levels * Solid/liquid/vapor interfacial phenomena, including the concepts of surface tension, wetting phenomena, disjoining pressure, contact angle, thin films and capillary phenomena, including interfacial balances for mass, species, momentum, and energy for multi-component and multiphase interfaces are discussed * Ample examples and end-of-chapter problems, with Solutions Manual and PowerPoint presentation available to the instructors
Download or read book Materials for Advanced Heat Transfer Systems written by S. J. Vijay and published by Woodhead Publishing. This book was released on 2022-11-26 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Advanced Heat Transfer Systems presents the latest research and technologies developed for high-performance materials in heat transfer and cooling. The book compiles sought after research academics and industry experts need to adopt to solve common problems in critical areas of heat transfer and cooling to help advance the field further. A variety of methodologies are included to synthesize the material used, along with the correct procedures to follow to ensure appropriate and effective use. Various case studies are presented to help the reader further understand the benefits and challenges of the materials discussed. Researchers, academics, students and engineers working on heat transfer systems will benefit from this interdisciplinary and applications-focused reference and be guided through various methodologies to make informed decisions based on the latest research and technologies available. Presents current and futuristic materials that are being synthesized or used for improving heat transfer mechanisms of a system Applies the technologies, models and methods to a variety of applications, including power generation, aerospace, electronics and automobiles Includes recent case studies which exemplify the concepts and technologies analyzed
Download or read book Modeling Multiphase Materials Processes written by Manabu Iguchi and published by Springer Science & Business Media. This book was released on 2010-11-10 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling Multiphase Materials Processes: Gas-Liquid Systems describes the methodology and application of physical and mathematical modeling to multi-phase flow phenomena in materials processing. The book focuses on systems involving gas-liquid interaction, the most prevalent in current metallurgical processes. The performance characteristics of these processes are largely dependent on transport phenomena. This volume covers the inherent characteristics that complicate the modeling of transport phenomena in such systems, including complex multiphase structure, intense turbulence, opacity of fluid, high temperature, coupled heat and mass transfer, chemical reactions in some cases, and poor wettability of the reactor walls. Also discussed are: solutions based on experimental and numerical modeling of bubbling jet systems, recent advances in the modeling of nanoscale multi-phase phenomena and multiphase flows in micro-scale and nano-scale channels and reactors. Modeling Multiphase Materials Processes: Gas-Liquid Systems will prove a valuable reference for researchers and engineers working in mathematical modeling and materials processing.
Download or read book Advances in Multiphase Flow and Heat Transfer written by Lixin Cheng and published by Bentham Science Publishers. This book was released on 2010-04-21 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Multiphase flow and heat transfer have found a wide range of applications in several engineering and science fields such as mechanical engineering, chemical and petrochemical engineering, nuclear engineering, energy engineering, material engineering, ocea"
Download or read book Advanced Heat and Mass Transfer written by Amir Faghri and published by Global Digital Press. This book was released on 2010 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt: All relevant advanced heat and mass transfer topics in heat conduction, convection, radiation, and multi-phase transport phenomena, are covered in a single textbook, and are explained from a fundamental point of view.
Download or read book Multiphase Flow Dynamics 5 written by Nikolay Ivanov Kolev and published by Springer Science & Business Media. This book was released on 2011-10-18 with total page 839 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present Volume 5 of the successful book package "Multiphase Flow Dynamics" is devoted to nuclear thermal hydraulics which is a substantial part of nuclear reactor safety. It provides knowledge and mathematical tools for adequate description of the process of transferring the fission heat released in materials due to nuclear reactions into its environment. It step by step introduces into the heat release inside the fuel, temperature fields in the fuels, the "simple" boiling flow in a pipe described using ideas of different complexity like equilibrium, non equilibrium, homogeneity, non homogeneity. Then the "simple" three-fluid boiling flow in a pipe is described by gradually involving the mechanisms like entrainment and deposition, dynamic fragmentation, collisions, coalescence, turbulence. All heat transfer mechanisms are introduced gradually discussing their uncertainty. Different techniques are introduced like boundary layer treatments or integral methods. Comparisons with experimental data at each step demonstrate the success of the different ideas and models. After an introduction of the design of the reactor pressure vessels for pressurized and boiling water reactors the accuracy of the modern methods is demonstrated using large number of experimental data sets for steady and transient flows in heated bundles. Starting with single pipe boiling going through boiling in the rod bundles the analysis of complete vessel including the reactor is finally demonstrated. Then a powerful method for nonlinear stability analysis of flow boiling and condensation is introduced. Models are presented and their accuracies are investigated for describing critical multiphase flow at different level of complexity. Basics of designing of steam generators, moisture separators and emergency condensers are presented. Methods for analyzing a complex pipe network flows with components like pumps, valves etc. are also presented. Methods for analysis of important aspects of the severe accidents like melt-water interactions, external cooling and cooling of layers of molten nuclear reactor material are presented. Valuable sets of thermo-physical and transport properties for severe accident analysis are presented for the following materials: uranium dioxide, zirconium dioxide, stainless steel, zirconium, aluminum, aluminum oxide, silicon dioxide, iron oxide, molybdenum, boron oxide, reactor corium, sodium, lead, bismuth, and lead-bismuth eutectic alloy. The emphasis is on the complete and consistent thermo dynamical sets of analytical approximations appropriate for computational analysis. Therefore the book presents a complete coverage of the modern Nuclear Thermal Hydrodynamics. This present second edition includes various updates, extensions, improvements and corrections. This present second edition includes various updates, extensions, improvements and corrections.
Download or read book Advances in Multiphase Flow and Heat Transfer written by Lixin Cheng and published by . This book was released on 2012 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiphase Flow and Heat Transfer in Materials Processing written by Michael M. Chen and published by . This book was released on 1994 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Multiphase Flow and Heat Transfer written by Lixin Cheng and published by Bentham Science Publishers. This book was released on 2009-12-17 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Multiphase flow and heat transfer have found a wide range of applications in several engineering and science fields such as mechanical engineering, chemical and petrochemical engineering, nuclear engineering, energy engineering, material engineering, ocea"
Download or read book Heat Transfer in Single and Multiphase Systems written by Greg F. Naterer and published by CRC Press. This book was released on 2002-08-29 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensively revised and thoroughly updated, this popular text de-emphasizes high level mathematics in favor of effective, accurate modeling. Real-world examples amplify the theory and show how to use derived equations to model physical problems. Exercises that parallel the examples build readers' confidence and prepare them to confront the more com
Download or read book Boiling Heat Transfer written by Richard T. Lahey and published by . This book was released on 1992 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers the modern developments in boiling heat transfer and two-phase flow, and is intended to provide industrial, government and academic researchers with state-of-the-art research findings in the area of multiphase flow and heat transfer technology. Special attention is given to technology transfer, indicating how recent significant results may be used for practical applications. The chapters give detailed technical material that will be useful to engineers and scientists who work in the field of multiphase flow and heat transfer. The authors of all chapters are members of the CMR at Rensselaer, a research centre specializing in the state-of-the-art in multiphase science.
Download or read book Multiphase Flow Dynamics 1 written by Nikolay Ivanov Kolev and published by Springer Science & Business Media. This book was released on 2005-12-05 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-phase flows are part of our natural environment such as tornadoes, typhoons, air and water pollution and volcanic activities as well as part of industrial technology such as power plants, combustion engines, propulsion systems, or chemical and biological industry. The industrial use of multi-phase systems requires analytical and numerical strategies for predicting their behavior. In its third extended edition this monograph contains theory, methods and practical experience for describing complex transient multi-phase processes in arbitrary geometrical configurations, providing a systematic presentation of the theory and practice of numerical multi-phase fluid dynamics. In the present first volume the fundamentals of multiphase dynamics are provided. This third edition includes various updates, extensions and improvements in all book chapters.
Download or read book Proceedings of the ASME Summer Heat Transfer Conference 2009 Combustion fire and reacting flow Heat transfer in multiphase systems Heat transfer in transport phenomena in manufacturing and materials processing Heat and mass transfer in biotechnology Low temperature heat transfer Environmental heat transfer Heat transfer education Visualization of heat transfer written by and published by . This book was released on 2009 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of 104 full-length, peer-reviewed technical papers. It covers such topics as: Combustion, Fire and Reacting Flow; Heat Transfer in Multiphase Systems; Heat Transfer in Transport Phenomena in Manufacturing and Materials Processing; Heat and Mass Transfer in Biotechnology; Heat Transfer Education; and, Visualization of Heat Transfer.
Download or read book Multiphase Polymer Systems written by Andreea Irina Barzic and published by CRC Press. This book was released on 2016-09-19 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase morphology in multicomponent polymer-based systems represents the main physical characteristic that allows for control of the material design and implicitly the development of new plastics. Emphasizing properties of these promising new materials in both solution and solid phase, this book describes the preparation, processing, properties, and practical implications of advanced multiphase systems from macro to nanoscales. It covers a wide range of systems including copolymers, polymer blends, polymer composites, gels, interpenetrating polymers, and layered polymer/metal structures, describing aspects of polymer science, engineering, and technology. The book analyzes experimental and theoretical aspects regarding the thermal and electrical transport phenomena and magnetic properties of crucial importance in advanced technologies. It reviews the most recent advances concerning morphological, rheological, interfacial, physical, fire-resistant, thermophysical, and biomedical properties of multiphase polymer systems. Concomitantly the book deals with basic investigation techniques that are sensitive in elucidating the features of each phase. It also discusses the latest research trends that offer new solutions for advanced bio- and nanotechnologies. Introduces an overview of recent studies in the area of multiphase polymer systems, their micro- and nanostructural evolutions in advanced technologies, and provides future outlooks, new challenges and opportunities. Discusses multicomponent structures that offer enhanced physical, mechanical, thermal, electrical, magnetic, and optical properties adapted to current requirements of modern technologies. Covers a wide range of materials, such as composites, blends, alloys, gels and interpenetrating polymer networks. Presents new strategies for controlling the micro- and nanomorphology and the mechanical properties of multiphase polymeric materials. Describes different applications of multiphase polymeric materials in various fields, including automotive, aeronautics and space industry, displays, and medicine.
Download or read book Handbook of Multiphase Polymer Systems written by Abderrahim Boudenne and published by John Wiley & Sons. This book was released on 2011-06-09 with total page 1322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase polymeric systems include a wide range of materials such as composites, blends, alloys, gels, and interpenetrating polymer networks (IPNs). A one-stop reference on multiphase polymer systems, this book fully covers the preparation, properties, and applications of advanced multiphase systems from macro to nano scales. Edited by well-respected academics in the field of multiphase polymer systems, the book includes contributions from leading international experts. An essential resource for plastic and rubber technologists, filler specialists and researchers in fields studying thermal and electrical properties.
