Download or read book Solving ODEs with MATLAB written by Lawrence F. Shampine and published by Cambridge University Press. This book was released on 2003-04-28 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise text, first published in 2003, is for a one-semester course for upper-level undergraduates and beginning graduate students in engineering, science, and mathematics, and can also serve as a quick reference for professionals. The major topics in ordinary differential equations, initial value problems, boundary value problems, and delay differential equations, are usually taught in three separate semester-long courses. This single book provides a sound treatment of all three in fewer than 300 pages. Each chapter begins with a discussion of the 'facts of life' for the problem, mainly by means of examples. Numerical methods for the problem are then developed, but only those methods most widely used. The treatment of each method is brief and technical issues are minimized, but all the issues important in practice and for understanding the codes are discussed. The last part of each chapter is a tutorial that shows how to solve problems by means of small, but realistic, examples.

Download or read book Computational Overview of Fluid Structure Interaction written by Khaled Ghaedi and published by BoD – Books on Demand. This book was released on 2021-07-28 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid-Structure Interaction (FSI), also known as engineering fluid mechanics, deals with mutual interaction between fluid and structural components. Fluid flow depending on the structural shape, motion, surface, and structural roughness, acts as mechanical forces on the structure. FSI can be seen everywhere in medicine, engineering, aerospace, the sciences, and even our daily life. This book provides the basic concept of fluid flow behavior in interaction with structures, which is crucial for almost all engineering disciplines. Along with the fundamental principles, the book covers a variety of FSI problems ranging from fundamentals of fluid mechanics to plasma physics, wind turbines and their turbulence, heat transfer, magnetohydrodynamics, and dam-reservoir systems.

Download or read book Convective Heat Transfer written by I. Pop and published by Elsevier. This book was released on 2001-02-23 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in studying the phenomena of convective heat and mass transfer between an ambient fluid and a body which is immersed in it stems both from fundamental considerations, such as the development of better insights into the nature of the underlying physical processes which take place, and from practical considerations, such as the fact that these idealised configurations serve as a launching pad formodelling the analogous transfer processes in more realistic physical systems. Such idealised geometries also provide a test ground for checking the validity of theoreticalanalyses. Consequently, an immense research effort has been expended in exploring and understanding the convective heat and mass transfer processes between a fluid and submerged objects of various shapes. Among several geometries which have received considerable attention are plates, circular and elliptical cylinders, and spheres, although much information is also available for some other bodies, such ascorrugated surfaces or bodies of relatively complicated shapes. The book is a unified progress report which captures the spirit of the work in progress in boundary-layer heat transfer research and also identifies potential difficulties and areas for further study. In addition, this work provides new material on convective heat and mass transfer, as well as a fresh look at basic methods in heat transfer. Extensive references are included in order to stimulate further studies of the problems considered. A state-of-the-art picture of boundary-layer heat transfer today is presented by listing and commenting also upon the most recent successful efforts and identifying the needs for further research.

Download or read book Microcontinuum Field Theories written by A. Cemal Eringen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microcontinuum field theories extend classical field theories to microscopic spaces and short time scales. This volume is concerned with the kinematics of microcontinua. It begins with a discussion of strain, stress tensors, balance laws, and constitutive equations, and then discusses applications of the fundamental ideas to the theory of elasticity. The ideas developed here are important in modeling the fluid or elastic properties of porous media, polymers, liquid crystals, slurries, and composite materials.

Download or read book Symmetry and Fluid Mechanics written by Rahmat Ellahi and published by MDPI. This book was released on 2020-03-25 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1980s, attention has increased in the research of fluid mechanics due to its wide application in industry and phycology. Major advances have occurred in the modeling of key topics such Newtonian and non-Newtonian fluids, nanoparticles, thermal management, and physiological fluid phenomena in biological systems, which have been published in this Special Issue on symmetry and fluid mechanics for Symmetry. Although, this book is not a formal textbook, it will be useful for university teachers, research students, and industrial researchers and for overcoming the difficulties that occur when considering the nonlinear governing equations. For such types of equations, obtaining an analytic or even a numerical solution is often more difficult. This book addresses this challenging job by outlining the latest techniques. In addition, the findings of the simulation are logically realistic and meet the standard of sufficient scientific value.

Download or read book Micropolar Fluids written by Grzegorz Lukaszewicz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micropolar fluids are fluids with microstructure. They belong to a class of fluids with nonsymmetric stress tensor that we shall call polar fluids, and include, as a special case, the well-established Navier-Stokes model of classical fluids that we shall call ordinary fluids. Physically, micropolar fluids may represent fluids consisting of rigid, randomly oriented (or spherical) particles suspended in a viscous medium, where the deformation of fluid particles is ignored. The model of micropolar fluids introduced in [65] by C. A. Eringen is worth studying as a very well balanced one. First, it is a well-founded and significant generalization of the classical Navier-Stokes model, covering, both in theory and applications, many more phenomena than the classical one. Moreover, it is elegant and not too complicated, in other words, man ageable to both mathematicians who study its theory and physicists and engineers who apply it. The main aim of this book is to present the theory of micropolar fluids, in particular its mathematical theory, to a wide range of readers. The book also presents two applications of micropolar fluids, one in the theory of lubrication and the other in the theory of porous media, as well as several exact solutions of particular problems and a numerical method. We took pains to make the presentation both clear and uniform.

Download or read book Fluid Mechanics and Fluid Power Vol 1 written by Suvanjan Bhattacharyya and published by Springer Nature. This book was released on 2023-05-10 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the 48th National Conference on Fluid Mechanics and Fluid Power (FMFP 2021) held at BITS Pilani in December 2021. It covers the topics such as fluid mechanics, measurement techniques in fluid flows, computational fluid dynamics, instability, transition and turbulence, fluid‐structure interaction, multiphase flows, micro- and nanoscale transport, bio-fluid mechanics, aerodynamics, turbomachinery, propulsion and power. The book will be useful for researchers and professionals interested in the broad field of mechanics.

Download or read book Fluid Flow Heat and Mass Transfer at Bodies of Different Shapes written by Kuppalapalle Vajravelu and published by Academic Press. This book was released on 2015-09-08 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of the equations governing the problems related to science and engineering are nonlinear in nature. As a result, they are inherently difficult to solve. Analytical solutions are available only for some special cases. For other cases, one has no easy means but to solve the problem must depend on numerical solutions. Fluid Flow, Heat and Mass Transfer at Bodies of Different Shapes: Numerical Solutions presents the current theoretical developments of boundary layer theory, a branch of transport phenomena. Also, the book addresses the theoretical developments in the area and presents a number of physical problems that have been solved by analytical or numerical method. It is focused particularly on fluid flow problems governed by nonlinear differential equations. The book is intended for researchers in applied mathematics, physics, mechanics and engineering. - Addresses basic concepts to understand the theoretical framework for the method - Provides examples of nonlinear problems that have been solved through the use of numerical method - Focuses on fluid flow problems governed by nonlinear equations

Download or read book Nanofluid Applications for Advanced Thermal Solutions written by Shriram S. Sonawane and published by Elsevier. This book was released on 2023-06-28 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofluid Applications for Advanced Thermal Solutions covers heat transfer applications of nanofluids in a variety of fields and the main techniques used in nanofluid flow and heat transfer analysis. The book features an introduction to heat transfer, nanofluid conduction, convection and nanofluid boiling and provides a thorough understanding of a variety of applications, including the energy storage component of solar PVT systems. It covers fundamental topics such as the analysis and measurement of thermophysical properties, convection, and heat transfer equipment performance, and provides a rigorous framework to assist readers in developing new nanofluid-based devices. Finally, the book explores convective instabilities, nanofluids in porous media, and entropy generation in nanofluids. This will be a valuable resource for upper undergraduate, postgraduate, and doctoral students and researchers in the fields of nanotechnology and nanofluids looking at heat transfer processes in chemical engineering and the petroleum industry. - Provides a comprehensive overview of the heat transfer application of nanofluids in a variety of fields - Features numerical and experimental investigations of hybrid and mono nanoparticles based nanofluids - Explores comparative performance investigations of various nanofluids for absorption/regeneration and metal extraction/stripping operations - Provides case examples of operation and scale-up challenges for nanofluid applications in the industrial process

Download or read book Flow and Transport in Subsurface Environment written by Natarajan Narayanan and published by Springer. This book was released on 2018-04-26 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of contributions from experts working on flow and transport in porous media around the globe. The book includes chapters authored by engineers, scientists, and mathematicians on single and multiphase flow and transport in homogeneous as well as heterogeneous porous media. Addressing various experimental, analytical, and modeling aspects of transport in sub-surface domains, the book offers a valuable resource for graduate students, researchers, and professionals alike.

Download or read book Convection in Porous Media written by Donald A. Nield and published by Springer. This book was released on 2017-03-15 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition of a widely admired text provides a user-friendly introduction to the field that requires only routine mathematics. The book starts with the elements of fluid mechanics and heat transfer, and covers a wide range of applications from fibrous insulation and catalytic reactors to geological strata, nuclear waste disposal, geothermal reservoirs, and the storage of heat-generating materials. As the standard reference in the field, this book will be essential to researchers and practicing engineers, while remaining an accessible introduction for graduate students and others entering the field. The new edition features 2700 new references covering a number of rapidly expanding fields, including the heat transfer properties of nanofluids and applications involving local thermal non-equilibrium and microfluidic effects.

Download or read book Impending Inquisitions in Humanities and Sciences written by Mohan Varkolu and published by CRC Press. This book was released on 2024-07-22 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: In an era of increasing specialization, the need for cross-disciplinary dialogue demands an integrated approach that transcends the artificial boundaries between disciplines. "Impending Inquisitions in Humanities and Sciences" presents a groundbreaking tapestry of cutting-edge research across the spectrum of humanities and sciences. This volume presents a meticulously curated selection of research papers presented at the conference, a forum where scholars from diverse fields – English, Mathematics, Physics, and Chemistry – converged to engage in rigorous dialogue and push the boundaries of knowledge. From the nuanced interpretations of literary texts to the elegant formulations of mathematical models, from the awe-inspiring revelations of physics to the meticulous experiments of chemistry, each contribution challenges assumptions and provokes fresh perspectives. This collection serves as a valuable resource for scholars, students, and academic fraternity with an insatiable curiosity about the world around us.

Download or read book International Journal of Engineering Research in Africa Vol 29 written by Akii Okonigbon Akaehomen Ibhadode and published by Trans Tech Publications Ltd. This book was released on 2017-03-10 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 29th volume of the International Journal of Engineering Research in Africa presents the articles which describe the results of engineering research and solutions in the fields of structural materials, building materials and construction technologies, applied dynamics of fluid and flow, chemical engineering, and engineering management of modern production. The articles will be useful for professionals concerned with mechanical engineering, materials science, chemical engineering, engineering management and for students and academic teachers of the related specialties.

Download or read book Keller Box Method and Its Application written by Kuppalapalle Vajravelu and published by Walter de Gruyter GmbH & Co KG. This book was released on 2014-08-19 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of the problems arising in science and engineering are nonlinear. They are inherently difficult to solve. Traditional analytical approximations are valid only for weakly nonlinear problems, and often break down for problems with strong nonlinearity. This book presents the current theoretical developments and applications of the Keller-box method to nonlinear problems. The first half of the book addresses basic concepts to understand the theoretical framework for the method. In the second half of the book, the authors give a number of examples of coupled nonlinear problems that have been solved by means of the Keller-box method. The particular area of focus is on fluid flow problems governed by nonlinear equation.

Download or read book Intelligent Systems Modeling and Simulation II written by Samsul Ariffin Abdul Karim and published by Springer Nature. This book was released on 2022-10-12 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops a new system of modeling and simulations based on intelligence system. As we are directly moving from Third Industrial Revolution (IR3.0) to Fourth Industrial Revolution (IR4.0), there are many emergence techniques and algorithm that appear in many sciences and engineering branches. Nowadays, most industries are using IR4.0 in their product development as well as to refine their products. These include simulation on oil rig drilling, big data analytics on consumer analytics, fastest algorithm for large-scale numerical simulations and many more. These will save millions of dollar in the operating costs. Without any doubt, mathematics, statistics and computing are well blended to form an intelligent system for simulation and modeling. Motivated by this rapid development, in this book, a total of 41 chapters are contributed by the respective experts. The main scope of the book is to develop a new system of modeling and simulations based on machine learning, neural networks, efficient numerical algorithm and statistical methods. This book is highly suitable for postgraduate students, researchers as well as scientists that have interest in intelligent numerical modeling and simulations.

Download or read book Journal of National Academy of Mathematics India written by and published by . This book was released on 1985 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineering Fluid Flows and Heat Transfer Analysis written by Houssem Laidoudi and published by Trans Tech Publications Ltd. This book was released on 2020-03-02 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer reviewed papers only