Download or read book Heat Transfer in Fluidized Beds written by O. Molerus and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a much needed and thorough treatment of the heat transfer in agitated disperse systems. It gives predictive equations for the heat transfer in moving beds, bubbling and circulating fluidized beds, pneumatic transport in vertical tubes and particulate fluidized beds. Owing to the many different modes of activation of heat transfer, the basic approach of the book is to provide experimental evidence of the relevance of particle motion to the proximity of solid surfaces for the heat transfer observed. This has been achieved by the evaluation of experiments obtained with a newly developed pulsed light method using luminous particles. Heat Transfer in Fluidized Beds will be of great use to students and researchers involved in heat transfer and thermodynamics.
Download or read book Fluidized Bed Combustion of a Single Carbon Particle written by Wolter Prins and published by . This book was released on 1987 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluidization Engineering written by D. Kunii and published by Elsevier. This book was released on 2013-10-22 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluidization Engineering, Second Edition, expands on its original scope to encompass these new areas and introduces reactor models specifically for these contacting regimes. Completely revised and updated, it is essentially a new book. Its aim is to distill from the thousands of studies those particular developments that are pertinent for the engineer concerned with predictive methods, for the designer, and for the user and potential user of fluidized beds. - Covers the recent advances in the field of fluidization. - Presents the studies of developments necessary to the engineers, designers, and users of fluidized beds.
Download or read book Direct Contact Heat Transfer written by Frank Kreith and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: to increase the use of direct contact processes, the National Science Foundation sup ported a workshop on direct contact heat transfer at the Solar Energy Research Insti tute in the summer of 1985. We served as organizers for this workshop, which em phasized an area of thermal engineering that, in our opinion, has great promise for the future, but has not yet reached the point of wide-spread commercial application. Hence, a summary of the state of knowledge at this point is timely. The workshop had a dual objective: 1. To summarize the current state of knowledge in such a form that industrial practi tioners can make use of the available information. 2. To indicate the research and development needed to advance the state-of-the-art, indicating not only what kind of research is needed, but also the industrial poten tial that could be realized if the information to be obtained through the proposed research activities were available.
Download or read book Surface renewal Models for Heat Transfer Between Walls and Fluidized Beds written by R. D. Patel and published by . This book was released on 1967 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat And Mass Transfer In Fixed And Fluidized Beds written by W. P. M. van Swaaij and published by CRC Press. This book was released on 1986-06-01 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Circulating Fluidized Bed Boilers written by Prabir Basu and published by Springer. This book was released on 2015-04-07 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: · Explains operation and scientific fundamentals of circulating fluidized bed (CFB) boilers · Outlines practical issues in industrial use · Teaches how to optimize design for maximum reliability and efficiency · Discusses operating and maintenance issues and how to troubleshoot them This book provides practicing engineers and students with insight into the design and operation of circulating fluidized bed (CFB) boilers through a combination of theoretical concepts and practical experience. An emphasis on combustion, hydrodynamics, heat transfer, and material issues illustrates these concepts with numerous examples from actual operating plants. The relevance of design and feed-stock parameters to the operation of a CFB boiler are also examined, along with their impacts on designs of mechanical components, including cyclones, air distributor grids, and solid recycle systems. This versatile resource explains how fluidized bed equipment works and how the basic principles of thermodynamics and fluid mechanics influence design, while providing insight into planning new projects, troubleshooting existing equipment, and appreciating the capabilities and limitations of the process. From hydrodynamics to construction and maintenance, the author covers all of the essential information needed to understand, design, operate, and maintain a complete fluidized bed system. It is a must for clean coal technology as well as for biomass power generation.
Download or read book VDI Heat Atlas written by VDI Gesellschaft and published by Springer Science & Business Media. This book was released on 2010-07-21 with total page 1608 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than 50 years, the Springer VDI Heat Atlas has been an indispensable working means for engineers dealing with questions of heat transfer. Featuring 50% more content, this new edition covers most fields of heat transfer in industrial and engineering applications. It presents the interrelationships between basic scientific methods, experimental techniques, model-based analysis and their transfer to technical applications.
Download or read book Fluidized Bed Reactors Processes and Operating Conditions written by John G. Yates and published by Springer. This book was released on 2016-09-27 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fluidized-bed reactor is the centerpiece of industrial fluidization processes. This book focuses on the design and operation of fluidized beds in many different industrial processes, emphasizing the rationale for choosing fluidized beds for each particular process. The book starts with a brief history of fluidization from its inception in the 1940’s. The authors present both the fluid dynamics of gas-solid fluidized beds and the extensive experimental studies of operating systems and they set them in the context of operating processes that use fluid-bed reactors. Chemical engineering students and postdocs as well as practicing engineers will find great interest in this book.
Download or read book Heat Transfer Exercises written by and published by Bookboon. This book was released on with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of Fluidization to Food Processing written by Peter G. Smith and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluidization is a technique that enables solid particles to take on some of the properties of a fluid. Despite being very widely used within the food processing industry, understanding of this important technique is often limited. Applications of Fluidization to Food Processing sets out the established theory of fluidization and relates this to food processing applications, particularly in: • Drying • Freezing • Mixing • Granulation • Fermentation This important and thorough book, written by Peter Smith, who has many years’ experience teaching and researching in food processing, is an essential tool and reference for food scientists and technologists, and engineers working within the food industry. Libraries, and research and development groups within all universities and research establishments where food science, food studies, food technology, physics and engineering are studied and taught should have copies of this useful book.
Download or read book Fluidized Bed Technologies for Near Zero Emission Combustion and Gasification written by Fabrizio Scala and published by Elsevier. This book was released on 2013-09-30 with total page 1091 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluidized bed (FB) combustion and gasification are advanced techniques for fuel flexible, high efficiency and low emission conversion. Fuels are combusted or gasified as a fluidized bed suspended by jets with sorbents that remove harmful emissions such as SOx. CO2 capture can also be incorporated. Fluidized bed technologies for near-zero emission combustion and gasification provides an overview of established FB technologies while also detailing recent developments in the field.Part one, an introductory section, reviews fluidization science and FB technologies and includes chapters on particle characterization and behaviour, properties of stationary and circulating fluidized beds, heat and mass transfer and attrition in FB combustion and gasification systems. Part two expands on this introduction to explore the fundamentals of FB combustion and gasification including the conversion of solid, liquid and gaseous fuels, pollutant emission and reactor design and scale up. Part three highlights recent advances in a variety of FB combustion and gasification technologies before part four moves on to focus on emerging CO2 capture technologies. Finally, part five explores other applications of FB technology including (FB) petroleum refining and chemical production.Fluidized bed technologies for near-zero emission combustion and gasification is a technical resource for power plant operators, industrial engineers working with fluidized bed combustion and gasification systems and researchers, scientists and academics in the field. - Examines the fundamentals of fluidized bed (FB) technologies, including the conversion of solid, liquid and gaseous fuels - Explores recent advances in a variety of technologies such as pressurized FB combustion, and the measurement, monitoring and control of FB combustion and gasification - Discusses emerging technologies and examines applications of FB in other processes
Download or read book Circulating Fluidized Beds written by J.R. Grace and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the late 1970s there has been an explosion of industrial and academic interest in circulating fluidized beds. In part, the attention has arisen due to the environmental advantages associated with CFB (circulating . fluidized bed) combustion systems, the incorporation of riser reactors employing cir culating fluidized bed technology in petroleum refineries for fluid catalytic cracking and, to a lesser extent, the successes of CFB technology for calcina tion reactions and Fischer-Tropsch synthesis. In part, it was also the case that too much attention had been devoted to bubbling fluidized beds and it was time to move on to more complex and more advantageous regime,S of operation. Since 1980 a number of CFB processes have been commercialized. There have been five successful International Circulating Fluidized Bed Confer ences beginning in 1985, the most recent taking place in Beijing in May 1996. In addition, we have witnessed a host of other papers on CFB funda mentals and applications in journals and other archival publications. There have also been several review papers and books on specific CFB topics. However, there has been no comprehensive book reviewing the field and attempting to provide an overview of both fundamentals and applications. The purpose of this book is to fill this vacuum.
Download or read book Heat and Mass Transfer written by Hans Dieter Baehr and published by Springer Science & Business Media. This book was released on 2006-08-02 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a solid foundation in the principles of heat and mass transfer and shows how to solve problems by applying modern methods. The basic theory is developed systematically, exploring in detail the solution methods to all important problems. The revised second edition incorporates state-of-the-art findings on heat and mass transfer correlations. The book will be useful not only to upper- and graduate-level students, but also to practicing scientists and engineers. Many worked-out examples and numerous exercises with their solutions will facilitate learning and understanding, and an appendix includes data on key properties of important substances.
Download or read book Theory and Calculation of Heat Transfer in Furnaces written by Yanguo Zhang and published by Elsevier. This book was released on 2016-04-13 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory and Calculation of Heat Transfer in Furnaces covers the heat transfer process in furnaces, how it is related to energy exchange, the characteristics of efficiency, and the cleaning of combustion, providing readers with a comprehensive understanding of the simultaneous physical and chemical processes that occur in boiler combustion, flow, heat transfer, and mass transfer. - Covers all the typical boilers with most fuels, as well as the effects of ash deposition and slagging on heat transfer - Combines mature and advanced technologies that are easy to understand and apply - Describes basic theory with real design that is based on meaningful experimental data
Download or read book Heat Exchange of Tubular Surfaces in a Bubbling Fluidized Bed written by Oleksandr Redko and published by Academic Press. This book was released on 2023-08-12 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Exchange of Tubular Surfaces in a Bubbling Boiling Bed bridges the gap surrounding the study of a boiling bed of large particles with smooth and ribbed pipes, as well as pipe bundles. The book's authors combine results from experimental studies with their varied practical experience in fields of boiling bed applications across various disciplines such as chemical, pharmacological, metallurgical and power engineering industries. This book provides readers with a deep practical understanding of how to calculate the heat engineering parameters of ribbed pipe bundles in a boiling bed, along with the hydrodynamics of the boiling bed.Researchers and experts involved in the design, development and operation of boiling bed apparatus will follow step-by-step methods and procedures to gain knowledge of the hydrodynamic and heat exchange elements of the boiling bed which can be applied to their own settings. The effect of gas velocity, size and properties of the dispersed material, the geometric characteristics of the pipe bundle is also presented, alongside data on the effect of high temperature and high pressure of gas in a dispersed system on heat exchange intensity. - Covers the design of apparatus and devices with a boiling bed in various industries - Includes criteria equations for calculating heat exchange, as well as data for the calculation of furnace devices - Presents the structure analysis of the boiling bed with submerged pipe bundles and the calculation of the hydrodynamic resistance of the boiling bed
Download or read book Essentials of Fluidization Technology written by John R. Grace and published by John Wiley & Sons. This book was released on 2020-06-15 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise and clear treatment of the fundamentals of fluidization, with a view to its applications in the process and energy industries.
