Download or read book Design and Operation of Heat Exchangers and their Networks written by Wilfried Roetzel and published by Academic Press. This book was released on 2019-10-04 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Operation of heat Exchangers and Their Networks presents a comprehensive and detailed analysis on the thermal design methods for the most common types of heat exchangers, with a focus on their networks, simulation procedures for their operations, and measurement of their thermal performances. The book addresses the fundamental theories and principles of heat transfer performance of heat exchangers and their applications and then applies them to the use of modern computing technology. Topics discussed include cell methods for condensers and evaporators, dispersion models for heat exchangers, experimental methods for the evaluation of heat exchanger performance, and thermal calculation algorithms for multi-stream heat exchangers and heat exchanger networks. Includes MATLAB codes to illustrate how the technologies and methods discussed can be easily applied and developed. Analyses a range of different models, applications, and case studies in order to reveal more advanced solutions for industrial applications. Maintains a strong focus on the fundamental theories and principles of the heat transfer performance of heat exchangers and their applications for complex flow arrangement.
Download or read book Design and Operation of Heat Exchangers written by Wilfried Roetzel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Eurotherm Committee was created in 1986 from member countries of the European Community. It has the purpose of organising and coordinating scientific events such as seminars and conferences in the thermal sciences. The series of Eurotherm Seminars established by the Committee has become a popular forum for high-level scientific and technical interchange of ideas in a wide range of specialist topics. While the presentation and publication of papers at the Seminars are encouraged, the primary aim is to stimulate discussion and liaison between specialist groups. The present Chairman of Eurotherm is Professor C.J. Hoogendoorn of the Technical University, Delft (Fax [NL] 15, 783251). Information on Mure Seminars is available from the Secretary, Keith Cornwell, Heriot-Watt University, Edinburgh (Fax [UK] 31, 451, 3129). This particular Seminar No. 18 on the Design and Operation of Heat Exchangers was the first one on this topic and was held at the Universitat der Bundeswehr Hamburg (University of the Federal Armed Forces Hamburg) from February 27 to March 1 in 1991. The seminar was an international event and was attended by more than 60 scientists not only from countries of the European Community such as Belgium, France, Germany, Great Britain, and the Netherlands but also from other countries such as Canada, China, India, Israel, Romania, Soviet Union, Sweden and the United States of America.
Download or read book Compact Heat Exchangers written by J.E. Hesselgreaves and published by Elsevier. This book was released on 2001-05-08 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the ideas and industrial concepts in compact heat exchanger technology that have been developed in the last 10 years or so. Historically, the development and application of compact heat exchangers and their surfaces has taken place in a piecemeal fashion in a number of rather unrelated areas, principally those of the automotive and prime mover, aerospace, cryogenic and refrigeration sectors. Much detailed technology, familiar in one sector, progressed only slowly over the boundary into another sector. This compartmentalisation was a feature both of the user industries themselves, and also of the supplier, or manufacturing industries. These barriers are now breaking down, with valuable cross-fertilisation taking place. One of the industrial sectors that is waking up to the challenges of compact heat exchangers is that broadly defined as the process sector. If there is a bias in the book, it is towards this sector. Here, in many cases, the technical challenges are severe, since high pressures and temperatures are often involved, and working fluids can be corrosive, reactive or toxic. The opportunities, however, are correspondingly high, since compacts can offer a combination of lower capital or installed cost, lower temperature differences (and hence running costs), and lower inventory. In some cases they give the opportunity for a radical re-think of the process design, by the introduction of process intensification (PI) concepts such as combining process elements in one unit. An example of this is reaction and heat exchange, which offers, among other advantages, significantly lower by-product production.To stimulate future research, the author includes coverage of hitherto neglected approaches, such as that of the Second Law (of Thermodynamics), pioneered by Bejan and co- workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of exergy, according to interpretation.
Download or read book Heat Exchanger Design written by Arthur P. Fraas and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Second Edition of the well-received work on design, construction, and operation of heat exchangers. Demonstrates how to apply theories of fluid mechanics and heat transfer to practical problems posed by design, testing, and installation of heat exchangers. Tables and data have been brought up to date, and there is new material on problems of vibration and fouling, and on optimization of energy use in the chemical process and manufacturing industries. Covers all basic principles of heat exchanger design, and addresses many specialized situations encountered in engineering applications.
Download or read book Heat Exchanger Design Guide written by Manfred Nitsche and published by Butterworth-Heinemann. This book was released on 2015-09-28 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Exchanger Design Guide: A Practical Guide for Planning, Selecting and Designing of Shell and Tube Exchangers takes users on a step-by-step guide to the design of heat exchangers in daily practice, showing how to determine the effective driving temperature difference for heat transfer. Users will learn how to calculate heat transfer coefficients for convective heat transfer, condensing, and evaporating using simple equations. Dew and bubble points and lines are covered, with all calculations supported with examples. This practical guide is designed to help engineers solve typical problems they might encounter in their day-to-day work, and will also serve as a useful reference for students learning about the field. The book is extensively illustrated with figures in support of the text and includes calculation examples to ensure users are fully equipped to select, design, and operate heat exchangers. Covers design method and practical correlations needed to design practical heat exchangers for process application Includes geometrical calculations for the tube and shell side, also covering boiling and condensation heat transfer Explores heat transfer coefficients and temperature differences Designed to help engineers solve typical problems they might encounter in their day-to-day work, but also ideal as a useful reference for students learning about the field
Download or read book Heat Exchangers written by Sadik Kakaç and published by CRC Press. This book was released on 2002-03-14 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Researchers, practitioners, instructors, and students all welcomed the first edition of Heat Exchangers: Selection, Rating, and Thermal Design for gathering into one place the essence of the information they need-information formerly scattered throughout the literature. While retaining the basic objectives and popular features of the bestselling fi
Download or read book Fundamentals of Heat Exchanger Design written by Ramesh K. Shah and published by John Wiley & Sons. This book was released on 2003-08-11 with total page 973 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive and unique source integrates the material usually distributed among a half a dozen sources. * Presents a unified approach to modeling of new designs and develops the skills for complex engineering analysis. * Provides industrial insight to the applications of the basic theory developed.
Download or read book Heat Transfer and the Design and Operation of Heat Exchangers written by South African Institution of Mechanical Engineers and published by . This book was released on 1974 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Exchanger Design Handbook written by Kuppan Thulukkanam and published by CRC Press. This book was released on 2000-02-23 with total page 1142 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This comprehensive reference covers all the important aspects of heat exchangers (HEs)--their design and modes of operation--and practical, large-scale applications in process, power, petroleum, transport, air conditioning, refrigeration, cryogenics, heat recovery, energy, and other industries. Reflecting the author's extensive practical experienc
Download or read book Heat Exchangers written by Holger Martin and published by Routledge. This book was released on 2018-05-04 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a text/reference illustrating thermal and hydraulic design of heat exchangers. The book shows how to apply the fundamentals of thermodynamics, heat transfer, and fluid dynamics for a systematic analysis of the phenomena in heat exchangers, important to energy effective operation in process plants. Beginning with illustrative examples detailing applications of fundamentals, the text then shows the influence of flow configuration on the performance of heat exchangers. Here the equations to calculate mean temperature difference and efficiency for stirred tank, parallel, counter-and cross flow and their combinations are derived and put together in a new and very compact way. In some cases, short computer programs are given to evaluate more complicated formulas or algorithms. Chapter 3 is comprised of seven fully worked out examples showing application of the fundamentals to thermal and hydraulic design, i.e. sizing of heat exchangers. It includes problems and worked examples and is written in a self study format. The text should be useful to practicing engineers and also graduate students in chemical and mechanical engineering.
Download or read book Compact Heat Exchangers written by J.E. Hesselgreaves and published by Butterworth-Heinemann. This book was released on 2016-09-26 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Heat Exchangers: Selection, Design, and Operation, Second Edition, is fully revised to present the most recent and fundamental ideas and industrial concepts in compact heat exchanger technology. This complete reference compiles all aspects of theory, design rules, operational issues, and the most recent developments and technological advancements in compact heat exchangers. New to this edition is the inclusion of micro, sintered, and porous passage description and data, electronic cooling, and an introduction to convective heat transfer fundamentals. New revised content provides up-to-date coverage of industrially available exchangers, recent fouling theories, and reactor types, with summaries of off-design performance and system effects and installations issues in, for example, automobiles and aircraft. Hesselgreaves covers previously neglected approaches, such as the Second Law (of Thermodynamics), pioneered by Bejan and co-workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of energy, according to interpretation. Contains revised content, covering industrially available exchangers, recent fouling theories, and reactor types Includes useful comparisons throughout with conventional heat exchangers to emphasize the benefits of CPHE applications Provides a thorough system view from commissioning, operation, maintenance, and design approaches to reduce fouling and fouling factors Compiles all aspects of theory, design rules, operational issues, and the most recent developments and technological advancements in compact heat exchangers
Download or read book Heat Transfer written by Miguel Araiz and published by BoD – Books on Demand. This book was released on 2021-09-22 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal energy is present in all aspects of our lives, including when cooking, driving, or turning on the heat or air conditioning. Sometimes this thermal management is not evident, but it is essential for our comfort and lifestyle. In addition, heat transfer is vital in many industrial processes. Thermal energy analysis is a complex task that usually requires different approaches. With five sections, this book provides information on heat transfer problems and using experimental techniques and computational models to analyse them.
Download or read book Heat Exchangers written by Sadik Kakaç and published by CRC Press. This book was released on 2012-03-01 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat exchangers are essential in a wide range of engineering applications, including power plants, automobiles, airplanes, process and chemical industries, and heating, air conditioning and refrigeration systems. Revised and updated with new problem sets and examples, Heat Exchangers: Selection, Rating, and Thermal Design, Third Edition presents a systematic treatment of the various types of heat exchangers, focusing on selection, thermal-hydraulic design, and rating. Topics discussed include: Classification of heat exchangers according to different criteria Basic design methods for sizing and rating of heat exchangers Single-phase forced convection correlations in channels Pressure drop and pumping power for heat exchangers and their piping circuit Design solutions for heat exchangers subject to fouling Double-pipe heat exchanger design methods Correlations for the design of two-phase flow heat exchangers Thermal design methods and processes for shell-and-tube, compact, and gasketed-plate heat exchangers Thermal design of condensers and evaporators This third edition contains two new chapters. Micro/Nano Heat Transfer explores the thermal design fundamentals for microscale heat exchangers and the enhancement heat transfer for applications to heat exchanger design with nanofluids. It also examines single-phase forced convection correlations as well as flow friction factors for microchannel flows for heat transfer and pumping power calculations. Polymer Heat Exchangers introduces an alternative design option for applications hindered by the operating limitations of metallic heat exchangers. The appendices provide the thermophysical properties of various fluids. Each chapter contains examples illustrating thermal design methods and procedures and relevant nomenclature. End-of-chapter problems enable students to test their assimilation of the material.
Download or read book Process Heat Transfer written by Robert W. Serth and published by Academic Press. This book was released on 2014-01-27 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Heat Transfer is a reference on the design and implementation of industrial heat exchangers. It provides the background needed to understand and master the commercial software packages used by professional engineers in the design and analysis of heat exchangers. This book focuses on types of heat exchangers most widely used by industry: shell-and-tube exchangers (including condensers, reboilers and vaporizers), air-cooled heat exchangers and double-pipe (hairpin) exchangers. It provides a substantial introduction to the design of heat exchanger networks using pinch technology, the most efficient strategy used to achieve optimal recovery of heat in industrial processes. Utilizes leading commercial software. Get expert HTRI Xchanger Suite guidance, tips and tricks previously available via high cost professional training sessions. Details the development of initial configuration for a heat exchanger and how to systematically modify it to obtain an efficient final design. Abundant case studies and rules of thumb, along with copious software examples, provide a complete library of reference designs and heuristics for readers to base their own designs on.
Download or read book Advances in Heat Exchangers written by Laura Castro Gómez and published by BoD – Books on Demand. This book was released on 2019-02-20 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat exchangers are important devices for engineering, research, and industry. Because of this, any improvement helps to optimize the whole process. Opportunity areas may be found in design, materials, or working fluids. In this sense, the present book compiles some advances in the matter of design (three chapters) and working fluids (one chapter). An introductory chapter also is presented.
Download or read book Heat Transfer and the Design and Operation of Heat Exchangers written by and published by . This book was released on 1974 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plate Heat Exchangers written by Bengt Sundén and published by WIT Press. This book was released on 2007 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plate-and-frame heat exchangers (PHEs) are used in many different processes at a broad range of temperatures and with a variety of substances. Research into PHEs has increased considerably in recent years and this is a compilation of knowledge on the subject. Containing invited contributions from prominent and active investigators in the area, it should enable graduate students, researchers, and research and development engineers in industry to achieve a better understanding of transport processes. Some guidelines for design and development are also included.
