Download or read book Heat Transfer and Flow Friction Performance of Three Compact Plate fin Heat Exchange Surfaces written by Stanford University. Department of Mechanical Engineering and published by . This book was released on 1949 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Heat Transfer and Flow Friction Performance of Three Compact Plate fin Heat Exchanger Surfaces written by William Morrow Kays and published by . This book was released on 1949 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat Transfer and Flow Friction Characteristics of Several Plate fin Type Compact Heat Exchanger Surfaces written by Paul F. Pucci and published by . This book was released on 1967 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental results for the convective heat transfer and flow friction characteristics of plate-fin type heat transfer surfaces are presented for five surfaces. Four surfaces had a sinusoidal fin geometry. Two of these were fabricated of stainless steel, two of nickel. One of the nickel surfaces had perforated nickel fins. The fifth surface was fabricated of stainless steel and had a triangular fin geometry. The heat transfer data were obtained by the single-blow transient testing technique and by the cyclic testing technique. The two techniques compliment each other in extending the range of testing capability.

Download or read book Heat Transfer Enhancement in Plate and Fin Extended Surfaces written by Sujoy Kumar Saha and published by Springer. This book was released on 2019-06-24 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief deals with heat transfer and friction in plate and fin extended heat transfer enhancement surfaces. It examines Offset-Strip Fin (OSF), Enhancement Principle, Analytically Based Models for j and f vs. Re, Transition from Laminar to Turbulent Region, Correlations for j and f vs. Re, Use of OSF with Liquids, Effect of Percent Fin Offset, Effect of Burred Edges, Louver fin, heat transfer and friction correlations, flow structure in the louver fin array, analytical model for heat transfer and friction, convex louver fin, wavy fin, 3D corrugated fin, perforated fin, pin fins and wire mesh, types of vortex generators, metal foam fin, plain fin, packings, numerical simulation of various types of fins.

Download or read book Heat Transfer and Flow Friction Characteristics of Several Plate fin Type Compact Heat Exchanger Surfaces written by and published by . This book was released on 1967 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental results for the convective heat transfer and flow friction characteristics of plate-fin type heat transfer surfaces are presented for five surfaces. Four surfaces had a sinusoidal fin geometry. Two of these were fabricated of stainless steel, two of nickel. One of the nickel surfaces had perforated nickel fins. The fifth surface was fabricated of stainless steel and had a triangular fin geometry. The heat transfer data were obtained by the single-blow transient testing technique and by the cyclic testing technique. The two techniques compliment each other in extending the range of testing capability. (Author).

Download or read book Experimental Determination of Heat Transfer and Flow Friction Characteristics for Several Plate Fin Type Compact Heat Exchanger Surfaces written by Stuart Franklin Ball and published by . This book was released on 1966 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Investigation of the Effect of Fin Spacing on the Performance of Louvered Plate fin Heat Exchanger Surfaces written by Stanford University. Department of Mechanical Engineering and published by . This book was released on 1948 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat Exchanger Design Handbook Vol 1 Heat exchanger theory Vol 2 Fluid mechanics and heat transfer Vol 3 Thermal and hydraulic design of heat exchangers Vol 4 Mechanical design of heat exchangers Vol 5 Physical properties written by Ernst U. Schlünder and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat Transfer and Flow Friction Characteristics of Three Double and Triple Sandwich High Performance Heat Transfer Surfaces written by Stanford University. Department of Mechanical Engineering and published by . This book was released on 1953 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Performance of Finned circular tube Heat Exchanger Surfaces written by Stanford University. Department of Mechanical Engineering and published by . This book was released on 1951 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Turbulent Heat Transfer and Flow Friction Characteristics of Plain Plate Fin Heat Exchanger Surfaces written by Stanford University. Department of Mechanical Engineering and published by . This book was released on 1959 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recent Advances in Analysis of Heat Transfer for Fin Type Surfaces written by Bengt Sundén and published by Witpress. This book was released on 2000 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Descripción del editor: "This volume is concerned with the heat transfer from extended surfaces, such as fins attached to a primary transfer surface. These are used extensively within heat exchanges and on heat transfer equipment to ensure that a specified rate of heat transfer is achieved between a heat source and sink. All of the chapters come from invited contributors and follow a unified outline and presentation.Contents: Overview of Extended Surface Heat Transfer ââ,¬â€œ Fins; Coupled Forced Convection, Conduction and Thermal Radiation of a Rectangular Fin in a Confined Space; Mechanistic Investigation of the Performance of a Triangular Fin; Conjugate Free and Mixed Convection Heat Transfer from a Vertical Fin Embedded in a Porous Medium; About Fin Performance and Optimization; Two-Dimensional Effects in Extended Surface Assessment; Steady-State Heat Transfer and Performance Assessment; Multi-Louvred Fin Surfaces; Methodology for the Design of Multi-Stream Plate-Fin Heat Exchangers; Incorporation of a Consideration of Operability into the Design of Multi-Stream Heat Exchangers." (WIT Press).

Download or read book A Study of the Heat Transfer and Friction Power Characteristics of High Rating Heat Transfer Surfaces written by William Morrow Kays and published by . This book was released on 1951 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Basic Heat Flow Friction Characteristics of Plain Plate fin Heat Exchanger Surfaces written by Stanford University. Department of Mechanical Engineering and published by . This book was released on 1949 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Compact Heat Exchangers written by J.E. Hesselgreaves and published by Elsevier. This book was released on 2001-05-08 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the ideas and industrial concepts in compact heat exchanger technology that have been developed in the last 10 years or so. Historically, the development and application of compact heat exchangers and their surfaces has taken place in a piecemeal fashion in a number of rather unrelated areas, principally those of the automotive and prime mover, aerospace, cryogenic and refrigeration sectors. Much detailed technology, familiar in one sector, progressed only slowly over the boundary into another sector. This compartmentalisation was a feature both of the user industries themselves, and also of the supplier, or manufacturing industries. These barriers are now breaking down, with valuable cross-fertilisation taking place. One of the industrial sectors that is waking up to the challenges of compact heat exchangers is that broadly defined as the process sector. If there is a bias in the book, it is towards this sector. Here, in many cases, the technical challenges are severe, since high pressures and temperatures are often involved, and working fluids can be corrosive, reactive or toxic. The opportunities, however, are correspondingly high, since compacts can offer a combination of lower capital or installed cost, lower temperature differences (and hence running costs), and lower inventory. In some cases they give the opportunity for a radical re-think of the process design, by the introduction of process intensification (PI) concepts such as combining process elements in one unit. An example of this is reaction and heat exchange, which offers, among other advantages, significantly lower by-product production.To stimulate future research, the author includes coverage of hitherto neglected approaches, such as that of the Second Law (of Thermodynamics), pioneered by Bejan and co- workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of exergy, according to interpretation.

Download or read book Heat Transfer and Pressure Loss Performance of Griscom Russell Special Small K fin Helically Finned Tubes written by Theodore C. Carnavos and published by . This book was released on 1958 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fin Shape Thermal Optimization Using Bejan s Constuctal Theory written by Giulio Lorenzini and published by Morgan & Claypool Publishers. This book was released on 2011-01-02 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains research results obtained by applying Bejan's Constructal Theory to the study and therefore the optimization of fins, focusing on T-shaped and Y-shaped ones. Heat transfer from finned surfaces is an example of combined heat transfer natural or forced convection on the external parts of the fin, and conducting along the fin. Fin's heat exchange is rather complex, because of variation of both temperature along the fin and convective heat transfer coefficient. Furthermore possible presence of more fins invested by the same fluid flow has to be considered. Classical fin theory tried to reduce the coupled heat transfer problem to a one-dimensional problem by defining an average temperature of the fin and writing equations using this parameter. However, it was shown that this approach cannot be used because of the effects of two-dimensional heat transfer, especially in the presence of short fins. CFD codes offer the possibility to consider bi-dimensional (and more generally, three-dimensional) effects and then a more real approach to the physic phenomena of finned surface's heat exchange. A commercial CFD code was used to analyse the case of heat exchange in presence of T-shaped fins, following an approach suggested by Bejan's Constructal Theory. The comparative results showed a significant agreement with previous research taken as a reference, and this result allows for the application of this approach to a wider range of systems. T-shaped optimized fin geometry is the starting point for further research. Starting from the optimal results (T-shape optimized fins), we show the trend of the assessment parameter (the dimensionless conductance) in function of the angle α between the two horizontal arms of the fin. A value for α, 90°