Download or read book Analysis of Turbulent Boundary Layers written by Tuncer Cebeci and published by Elsevier. This book was released on 2012-12-02 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of Turbulent Boundary Layers focuses on turbulent flows meeting the requirements for the boundary-layer or thin-shear-layer approximations. Its approach is devising relatively fundamental, and often subtle, empirical engineering correlations, which are then introduced into various forms of describing equations for final solution. After introducing the topic on turbulence, the book examines the conservation equations for compressible turbulent flows, boundary-layer equations, and general behavior of turbulent boundary layers. The latter chapters describe the CS method for calculating two-dimensional and axisymmetric laminar and turbulent boundary layers. This book will be useful to readers who have advanced knowledge in fluid mechanics, especially to engineers who study the important problems of design.

Download or read book Boundary Layer Theory written by Hermann Schlichting (Deceased) and published by Springer. This book was released on 2016-10-04 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the near-legendary textbook by Schlichting and revised by Gersten presents a comprehensive overview of boundary-layer theory and its application to all areas of fluid mechanics, with particular emphasis on the flow past bodies (e.g. aircraft aerodynamics). The new edition features an updated reference list and over 100 additional changes throughout the book, reflecting the latest advances on the subject.

Download or read book Physical and Computational Aspects of Convective Heat Transfer written by T. Cebeci and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is concerned with the transport of thermal energy in flows of practical significance. The temperature distributions which result from convective heat transfer, in contrast to those associated with radiation heat transfer and conduction in solids, are related to velocity characteristics and we have included sufficient information of momentum transfer to make the book self-contained. This is readily achieved because of the close relation ship between the equations which represent conservation of momentum and energy: it is very desirable since convective heat transfer involves flows with large temperature differences, where the equations are coupled through an equation of state, as well as flows with small temperature differences where the energy equation is dependent on the momentum equation but the momentum equation is assumed independent of the energy equation. The equations which represent the conservation of scalar properties, including thermal energy, species concentration and particle number density can be identical in form and solutions obtained in terms of one dependent variable can represent those of another. Thus, although the discussion and arguments of this book are expressed in terms of heat transfer, they are relevant to problems of mass and particle transport. Care is required, however, in making use of these analogies since, for example, identical boundary conditions are not usually achieved in practice and mass transfer can involve more than one dependent variable.

Download or read book Introduction to Convective Heat Transfer written by Nevzat Onur and published by John Wiley & Sons. This book was released on 2023-04-18 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: INTRODUCTION TO CONVECTIVE HEAT TRANSFER A highly practical intro to solving real-world convective heat transfer problems with MATLAB® and MAPLE In Introduction to Convective Heat Transfer, accomplished professor and mechanical engineer Nevzat Onur delivers an insightful exploration of the physical mechanisms of convective heat transfer and an accessible treatment of how to build mathematical models of these physical processes. Providing a new perspective on convective heat transfer, the book is comprised of twelve chapters, all of which contain numerous practical examples. The book emphasizes foundational concepts and is integrated with explanations of computational programs like MATLAB® and MAPLE to offer students a practical outlet for the concepts discussed within. The focus throughout is on practical, physical analysis rather than mathematical detail, which helps students learn to use the provided computational tools quickly and accurately. In addition to a solutions manual for instructors and the aforementioned MAPLE and MATLAB® files, Introduction to Convective Heat Transfer includes: A thorough introduction to the foundations of convective heat transfer, including coordinate systems, and continuum and thermodynamic equilibrium concepts Practical explorations of the fundamental equations of laminar convective heat transfer, including integral formulation and differential formulation Comprehensive discussions of the equations of incompressible external laminar boundary layers, including laminar flow forced convection and the thermal boundary layer concept In-depth examinations of dimensional analysis, including the dimensions of physical quantities, dimensional homogeneity, and dimensionless numbers Ideal for first-year graduates in mechanical, aerospace, and chemical engineering, Introduction to Convective Heat Transfer is also an indispensable resource for practicing engineers in academia and industry in the mechanical, aerospace, and chemical engineering fields.

Download or read book Convective Heat Transfer Third Edition written by Sadik Kakac and published by CRC Press. This book was released on 2013-12-17 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended for readers who have taken a basic heat transfer course and have a basic knowledge of thermodynamics, heat transfer, fluid mechanics, and differential equations, Convective Heat Transfer, Third Edition provides an overview of phenomenological convective heat transfer. This book combines applications of engineering with the basic concepts of convection. It offers a clear and balanced presentation of essential topics using both traditional and numerical methods. The text addresses emerging science and technology matters, and highlights biomedical applications and energy technologies. What’s New in the Third Edition: Includes updated chapters and two new chapters on heat transfer in microchannels and heat transfer with nanofluids Expands problem sets and introduces new correlations and solved examples Provides more coverage of numerical/computer methods The third edition details the new research areas of heat transfer in microchannels and the enhancement of convective heat transfer with nanofluids. The text includes the physical mechanisms of convective heat transfer phenomena, exact or approximate solution methods, and solutions under various conditions, as well as the derivation of the basic equations of convective heat transfer and their solutions. A complete solutions manual and figure slides are also available for adopting professors. Convective Heat Transfer, Third Edition is an ideal reference for advanced research or coursework in heat transfer, and as a textbook for senior/graduate students majoring in mechanical engineering and relevant engineering courses.

Download or read book The Atmospheric Boundary Layer for Engineers written by R. S. Azad and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: While I was participating in the IUTAM Symposium on Structure of Turbulence and Drag Reduction in Zurich, Switzerland, in 1989, I was approached by Prof. Dr. Themistocles Dracos to give a course oflectures on the Atmospheric Boundary Layer during my sabbatical leave at Eidgenossische Technische Hochschule (ETH) Zurich - Hoenggerberg in 1991. His reason for the suggestion was the growing interest in the environment and its dynamics created by flow in the Atmospheric Boundary Layer. I have been teaching boundary layer to undergraduate and graduate students for more than twenty five years, so I agreed to give a series of lectures on boundary layer of the atmosphere. From the start I thought very seriously about the problem and consulted all the published works in English on the Atmospheric Boundary Layer (ABL). First consider the topography of the Earth which has oceans calm and turbulent, mountain ranges of height up to 9 km, lands of variable height with forests, food growing vegetable and deserts. The shape of the Earth is nearly spherical except at the north and south poles. Sun supplies the energy to drive circulation of air around the Earth's atmosphere which for all practical purposes occupies the region up to about 10 to 11 km. This brief scenerio of Earth's topography reveals the complexity of flow very close to the Earth's surface that is hardly flat except at the oceans' surface which consists of about 70% of the total Earth's surface.

Download or read book A Review of High speed Convective Heat transfer Computation Methods written by Michael E. Tauber and published by . This book was released on 1989 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Convective Heat Transfer Second Edition written by Sadik Kakaç and published by CRC Press. This book was released on 1994-12-16 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Convective Heat Transfer presents an effective approach to teaching convective heat transfer. The authors systematically develop the topics and present them from basic principles. They emphasize physical insight, problem-solving, and the derivation of basic equations. To help students master the subject matter, they discuss the implementations of the basic equations and the workings of examples in detail. The material also includes carefully prepared problems at the end of each chapter. In this Second Edition, topics have been carefully chosen and the entire book has been reorganized for the best presentation of the subject matter. New property tables are included, and the authors dedicate an entire chapter to empirical correlations for a wide range of applications of single-phase convection. The book is excellent for helping students quickly develop a solid understanding of convective heat transfer.

Download or read book Modeling and Simulation of Turbulent Flows written by Roland Schiestel and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title provides the fundamental bases for developing turbulence models on rational grounds. The main different methods of approach are considered, ranging from statistical modelling at various degrees of complexity to numerical simulations of turbulence. Each of these various methods has its own specific performances and limitations, which appear to be complementary rather than competitive. After a discussion of the basic concepts, mathematical tools and methods for closure, the book considers second order closure models. Emphasis is placed upon this approach because it embodies potentials for clarifying numerous problems in turbulent shear flows. Simpler, generally older models are then presented as simplified versions of the more general second order models. The influence of extra physical parameters is also considered. Finally, the book concludes by examining large Eddy numerical simulations methods. Given the book’s comprehensive coverage, those involved in the theoretical or practical study of turbulence problems in fluids will find this a useful and informative read.

Download or read book Analytical Numerical and Experimental Results on Turbulent Boundary Layers written by David L. Whitfield and published by . This book was released on 1976 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes the results of analytical, numerical, and experimental investigations of incompressible and compressible boundary layers. The subjects considered are (1) Laminar and/or turbulent numerical boundary-layer calculations in which the Reynolds stress is related to the turbulent kinetic energy; (2) an analytical investigation of turbulence near a wall which is not founded on classical mixing-length theory; (3) analytical solutions for relating velocity and temperature throughout turbulent boundary layers for nonunity Prandtl numbers; (4) a description of the data reduction of pitot pressure measurements utilizing these analytical results, and (5) the application of the numerical and analytical results to the analysis of turbulent boundary-layer measurements made in the Propulsion Wind Tunnel Facility (PWT).

Download or read book Numerical Solution of the Equations for Compressible Laminar Transitional and Turbulent Boundary Layers and Comparisons with Experimental Data written by Julius E. Harris and published by . This book was released on 1971 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: A numerical method for solving the equations for laminar, transitional, and turbulent compressible boundary layers for either planar or axisymmetric flows is presented. The fully developed turbulent region is treated by replacing the Reynolds stress terms with an eddy viscosity model. The mean properties of the transitional boundary layer are calculated by multiplying the eddy viscosity by an intermittency function based on the statistical production and growth of the turbulent spots. A specifiable turbulent Prandtl number relates the turbulent flux of heat to the eddy viscosity. A three-point implicit finite-difference scheme is used to solve the system of equations. The momentum and energy equations are solved simultaneously without iteration. Numerous test cases are compared with experimental data for supersonic and hypersonic flows; these cases include flows with both favorable and mildly unfavorable pressure gradient histories, mass flux at the wall, and traverse curvature.

Download or read book Conjugate Problems in Convective Heat Transfer written by Abram S. Dorfman and published by CRC Press. This book was released on 2009-08-26 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Illustrates Calculations Using Machine and Technological Processes The conjugate heat transfer (CHT) problem addresses the thermal interaction between a body and fluid flowing over or through it. This is an essential consideration in nature and different areas of engineering, including mechanics, aerospace, nuclear engineering, biology, and meteorology. Advanced conjugate modeling of the heat transfer process is now used extensively in a wide range of applications. Conjugate Problems in Convective Heat Transfer addresses the latest theory, methods, and applications associated with both analytical and numerical methods of solution CHT problems and their exact and approximate solutions. It demonstrates how the true value of a CHT solution is derived by applying these solutions to contemporary engineering design analysis. Assembling cutting-edge information on modern modeling from more than 200 publications, this book presents more than 100 example applications in thermal treatment materials, machinery operation, and technological processes. Creating a practical review of current CHT development, the author includes methods associated with estimating heat transfer, particularly that from arbitrary non-isothermal surfaces in both laminar and turbulent flows. Harnesses the Modeling Power of CHT Unique in its consistent compilation and application of current knowledge, this book presents advanced CHT analysis as a powerful tool for modeling various device operations and technological processes, from relatively simple procedures to complex multistage, nonlinear processes.

Download or read book Classical and Modern Engineering Methods in Fluid Flow and Heat Transfer written by Abram Dorfman and published by Momentum Press. This book was released on 2012-02-26 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents contemporary theoretical methods in fluid flow and heat transfer, emphasizing principles of investigation and modeling of natural phenomena and engineering processes. It is organized into four parts and 12 chapters presenting classical and modern methods. Following the classical methods in Part 1, Part 2 offers in-depth coverage of analytical conjugate methods in convective heat transfer and peristaltic flow. Part 3 explains recent developments in numerical methods including new approaches for simulation of turbulence by direct solution of Navier-Stokes equations. Part 4 provides a wealth of applications in industrial systems, technology processes, biology, and medicine. More than a hundred examples show the applicability of the methods in such areas as nuclear reactors, aerospace, crystal growth, turbine blades, electronics packaging, optical fiber coating, wire casting, blood flow, urinary problems, and food processing. Intended for practicing engineers and students, the book balances strong formulation of problems with detailed explanations of definitions and terminology. Author comments give attention to special terms like singularity, order of magnitude, flow stability, and nonisothermicity characteristics. More than 400 exercises and questions are offered, many of which divide derivations between you and the author. For these exercises, the author describes the solution method and the results in the text, but you are directed to complete specific portions of the solutions. You then have a choice to accept the results or to further explore the underlying problem. Extensive references are provided for further study.

Download or read book Boundary Layer Theory written by Herrmann Schlichting and published by Springer Science & Business Media. This book was released on 2003-05-20 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new edition of the almost legendary textbook by Schlichting completely revised by Klaus Gersten is now available. This book presents a comprehensive overview of boundary-layer theory and its application to all areas of fluid mechanics, with emphasis on the flow past bodies (e.g. aircraft aerodynamics). It contains the latest knowledge of the subject based on a thorough review of the literature over the past 15 years. Yet again, it will be an indispensable source of inexhaustible information for students of fluid mechanics and engineers alike.

Download or read book NASA Technical Report written by and published by . This book was released on 1971 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applications of Mathematical Heat Transfer and Fluid Flow Models in Engineering and Medicine written by Abram S. Dorfman and published by John Wiley & Sons. This book was released on 2017-02-06 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of mathematical heat transfer and fluid flow models in engineering and medicine Abram S. Dorfman, University of Michigan, USA Engineering and medical applications of cutting-edge heat and flow models This book presents innovative efficient methods in fluid flow and heat transfer developed and widely used over the last fifty years. The analysis is focused on mathematical models which are an essential part of any research effort as they demonstrate the validity of the results obtained. The universality of mathematics allows consideration of engineering and biological problems from one point of view using similar models. In this book, the current situation of applications of modern mathematical models is outlined in three parts. Part I offers in depth coverage of the applications of contemporary conjugate heat transfer models in various industrial and technological processes, from aerospace and nuclear reactors to drying and food processing. In Part II the theory and application of two recently developed models in fluid flow are considered: the similar conjugate model for simulation of biological systems, including flows in human organs, and applications of the latest developments in turbulence simulation by direct solution of Navier-Stokes equations, including flows around aircraft. Part III proposes fundamentals of laminar and turbulent flows and applied mathematics methods. The discussion is complimented by 365 examples selected from a list of 448 cited papers, 239 exercises and 136 commentaries. Key features: Peristaltic flows in normal and pathologic human organs. Modeling flows around aircraft at high Reynolds numbers. Special mathematical exercises allow the reader to complete expressions derivation following directions from the text. Procedure for preliminary choice between conjugate and common simple methods for particular problem solutions. Criterions of conjugation, definition of semi-conjugate solutions. This book is an ideal reference for graduate and post-graduate students and engineers.

Download or read book Analysis of Turbulent Flows with Computer Programs written by Tuncer Cebeci and published by Elsevier. This book was released on 2004-04-20 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling and Computation of Turbulent Flows has been written by one of the most prolific authors in the field of CFD. Professor of aerodynamics at SUPAERO and director of DMAE at ONERA, the author calls on both his academic and industrial experience when presenting this work. The field of CFD is strongly represented by the following corporate companies; Boeing; Airbus; Thales; United Technologies and General Electric, government bodies and academic institutions also have a strong interest in this exciting field. Each chapter has also been specifically constructed to constitute as an advanced textbook for PhD candidates working in the field of CFD, making this book essential reading for researchers, practitioners in industry and MSc and MEng students.* A broad overview of the development and application of Computational Fluid Dynamics (CFD), with real applications to industry* A Free CD-Rom which contains computer program's suitable for solving non-linear equations which arise in modeling turbulent flows* Professor Cebeci has published over 200 technical papers and 14 books, a world authority in the field of CFD