Download or read book ASM Specialty Handbook written by Joseph R. Davis and published by ASM International. This book was released on 1997-01-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials covered include carbon, alloy and stainless steels; alloy cast irons; high-alloy cast steels; superalloys; titanium and titanium alloys; refractory metals and alloys; nickel-chromium and nickel-thoria alloys; structural intermetallics; structural ceramics, cermets, and cemented carbides; and carbon-composites.
Download or read book Heat Resistant Polymers written by J.P. Critchley and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Definitions of what is meant by a heat-resistant polymer vary considerably. We have taken the term to mean a polymer which can be used, at least for short time periods, at temperatures from 150°C. The greatest problem which arises in writing a monograph on such materials is the tremendous amount of data that is available. More than 2000 references have been published on one heat-resistant polymer system alone over a period of little more than two years. The result is that a very high degree of selectivity must be exercised with respect to the information reproduced. We have chosen to restrict our coverage to polymers that have received at least some degree of commercial exploitation and to details of their methods of preparation, their thermal and thermo-oxidative stabilities and modes of degradation, and their properties at elevated temperatures. It must be emphasized that other properties not cited, e. g. , hydrolytic and chemical stability, and resistance to ultraviolet radiation, may be equally important in particular uses of these materials. The "older" heat-resistant polymers, e. g. , the thermosets and some of the fluorine-containing materials, are not dealt with in such depth as are the "newer" polymers with aromatic and/or heterocyclic rings in the chain. This is because books have been available for some time on the well-established commercial polymers and developments in them have not been as marked re cently as in the aromatic and heterocyclic macromolecules.
Download or read book Investigation of Feasibility of Utilizing Available Heat Resistant Materials for Hypersonic Leading Edge Applications written by Bell Aircraft Corp and published by . This book was released on 1960 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Investigation of Feasibility of Utilizing Available Heat Resistant Materials for Hypersonic Leading Edge Applications Screening test results and selection of materials by Frank M Anthony and Harry A Pearl v 6 Determination and design application of mechanical properities of bare and coated graphite by Alfred Rudnick Robert L Carlson and George K Manning written by Bell Aircraft Corporation and published by . This book was released on 1960 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Investigation of Feasibility of Utilizing Available Heat Resistant Materials for Hypersonic Leading Edge Applications Tests of molybdenum and graphite leading edge components by Frank M Anthony and Andrew L Mistretta written by Bell Aircraft Corporation and published by . This book was released on 1961 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Investigation of Feasibility of Utilizing Available Heat Resistant Materials for Hypersonic Leading Edge Applications Analytical methods and design studies by F M Anthony and others written by Bell Aircraft Corporation and published by . This book was released on 1961 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Investigation of Feasibility of Utilizing Available Heat Resistant Materials for Hypersonic Leading Edge Applications written by Bell Aircraft Corporation and published by . This book was released on 1984 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Investigation of Feasibility of Utilizing Available Heat Resistant Materials for Hypersonic Leading Edge Applications Oxidation resistance of bare and coated molybdenum alloy and graphite by Donald J Powers and others written by Bell Aircraft Corporation and published by . This book was released on 1984 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Resistant Materials for Electric and Electronic Uses written by M. Hanai and published by . This book was released on 1984 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coatings for High Temperature Structural Materials written by National Research Council and published by National Academies Press. This book was released on 1996-05-13 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assesses the state of the art of coatings materials and processes for gas-turbine blades and vanes, determines potential applications of coatings in high-temperature environments, identifies needs for improved coatings in terms of performance enhancements, design considerations, and fabrication processes, assesses durability of advanced coating systems in expected service environments, and discusses the required inspection, repair, and maintenance methods. The promising areas for research and development of materials and processes for improved coating systems and the approaches to increased coating standardization are identified, with an emphasis on materials and processes with the potential for improved performance, quality, reproducibility, or manufacturing cost reduction.
Download or read book Developments in High Temperature Corrosion and Protection of Materials written by W Gao and published by Elsevier. This book was released on 2008-04-09 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature corrosion is a phenomenon that occurs in components that operate at very high temperatures, such as gas turbines, jet engines and industrial plants. Engineers are constantly striving to understand and prevent this type of corrosion. This book examines the latest developments in the understanding of high temperature corrosion processes and protective oxide scales and coatings.Part one looks at high temperature corrosion. Chapters cover diffusion and solid state reactions, external and internal oxidation of alloys, metal dusting corrosion, tribological degradation, hot corrosion, and oxide scales on hot-rolled steel strips. Modern techniques for analysing high temperature oxidation and corrosion are also discussed. Part two discusses methods of protection using ceramics, composites, protective oxide scales and coatings. Chapters focus on layered ternary ceramics, alumina scales, Ti-Al intermetallic compounds, metal matrix composites, chemical vapour deposited silicon carbide, nanocrystalline coatings and thermal barrier coatings. Part three provides case studies illustrating some of the challenges of high temperature corrosion to industry and how they can be overcome. Case studies include the petrochemical industry, modern incinerators and oxidation processing of electronic materials.This book is a valuable reference tool for engineers who develop heat resistant materials, mechanical engineers who design and maintain high temperature equipment and plant, and research scientists and students who study high temperature corrosion and protection of materials. - Describes the latest developments in understanding high temperature corrosion - Presents the latest research by the leading innovators from around the globe - Case studies are provided to illustrate key points
Download or read book The Further Development of Heat resistant Materials for Aircraft Engines written by Franz Bollenrath and published by . This book was released on 1946 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present report deals with the problems involved in the greater utilization and development of aircraft engine materials, and specifically; piston materials, cylinder heads, exhaust valves, and exhaust gas turbine blading. The blades of the exhaust gas turbine are likely to be the highest stressed components of modern power plants from a thermal-mechanical and chemical standpoint, even though the requirements on exhaust valves of engines with gasoline injection are in general no less stringent. For the fire plate in Diesel engines the specifications for mechanical strength and design are not so stringent, and the question of heat resistance, which under these circumstances is easier obtainable, predominates.
Download or read book Heat resistant Materials written by Krishnamurti Natesan and published by ASM International(OH). This book was released on 1991 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the First International Conference on Heat-Resistant Materials, held at Lake Geneva, Wisconsin, September 1991, comprise 75 papers by researchers, designers, manufacturers, fabricators, and end-users, in sessions devoted to materials processing and fabrication, environment effects
Download or read book International Conference on Heat Resistant Materials written by and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Toxic Products from Burning of Fire resistant Materials written by Allan F. Smith and published by . This book was released on 1973 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fire and Smoke Resistant Interior Materials for Commercial Transport Aircraft written by National Research Council and published by National Academies Press. This book was released on 1996-02-19 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two principal objectives of this book were (1) to identify promising materials technologies, design issues (both overall and for individual components), and fire performance parameters (both full scale and for individual components) that, if properly optimized, would lead to improved fire and smoke resistance of materials and components used in aircraft interiors; and (2) to identify long-range research directions that hold the most promise for producing predictive modeling capability, new advanced materials, and the required product development to achieve totally fire-resistant interiors in future aircrafts. The emphasis of the study is on long-term innovation leading to impacts on fire worthiness of aircraft interiors ten to twenty years hence.
Download or read book Special issue on heat resistant materials written by and published by . This book was released on 2007 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt:
