Download or read book Heat Recovery Heat Pumps in Commercial Buildings written by G. H. Redden and published by . This book was released on 1987 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat Recovery with Commercial Institutional and Industrial Heat Pumps written by Vasile Minea and published by CRC Press. This book was released on 2024-06-03 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Recovery with Commercial, Institutional, and Industrial Heat Pumps presents the basic concepts and thermodynamic behavior of mechanical vapor compression and recompression. It covers both ammonia water absorption and compression/resorption heat pumps. Including theoretical and practical approaches, the book features numerous solved exercises based on real thermodynamic and climatic parameters and case studies with takeaways from on-site experiences to help the reader better identify the advantages and limitations of each heat pumping technology. The book discusses future implementations of heat recovery heat pump technologies that are among the most energy-efficient and environmentally friendly techniques. This book will interest graduate students studying HVAC, thermal systems, and heat pumps. It will also benefit professionals working with heat pumps, industrial process engineers, manufacturers, and research and design personnel.

Download or read book Heat Pumps for Sustainable Heating and Cooling written by Y. H. Venus Lun and published by Springer Nature. This book was released on 2019-11-13 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the significance of using sustainable energy to prevent the deterioration of our planet using heat pumps. Energy sustainability can be achieved through improved energy efficiency. In this regard, heat pumps offer an energy-efficient alternative for heating and cooling. To drive the adoption of heat pumps as a key component of sustainable buildings, the authors focus on examining sustainable practices in heat pump operations and innovative system design. In view of the growing desire to use sustainable energy to meet heating and cooling demands and improve indoor air quality, this book offers a valuable reference guide to the available options in HVAC (heating, ventilation, and air-conditioning) system design. To begin with, the authors define sustainable energy and discuss the trend of “thinking green” in building design. They then discuss sustainable practices and heat pump applications in mapping out HVAC systems. In turn, they examine the use of green operations to promote sustainable practices and, in order to highlight the importance of innovative design, discuss the configuration options and precision control aspects. In closing, the authors illustrate innovative sustainable design on the basis of several energy-efficient cases. The book’s main goal is to drive the adoption of sustainable energy solutions. Heat pumps, it argues, represent the most efficient system for meeting commercial/recreational/residential heating and cooling demands. The book not only examines industrial practices in heat pump application, but also discusses advanced heat pump technologies and innovative heat pump designs.

Download or read book Heating and Cooling with Ground Source Heat Pumps in Cold and Moderate Climates written by Vasile Minea and published by CRC Press. This book was released on 2022-04-19 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heating and Cooling with Ground-Source Heat Pumps in Cold and Moderate Climates: Design Principles, Potential Applications and Case Studies focuses on applications and cases studies of ground-source heat pumps in moderate and cold climates. It details technical aspects (such as materials, thermal fluid carriers and pumping, and drilling/trenching technologies), as well as the most common and uncommon application fields for basic system configurations. The principles of system integrations and applications in moderate and cold climates (such as hybrid, solar-assisted, thermo-syphon, foundation, mines, snow melting, district heating and cooling ground-source heat pump systems, etc.) are also presented, each followed by case studies. Based on the author's more than 30 years of technical experience Discusses ground-source heat pump technologies that can be successfully applied in moderate and cold climates Presents several case studies, including successful energy results, as well as the main lessons learned This work is aimed at designers of HVAC systems, as well as geological, mechanical, and chemical engineers implementing environmentally-friendly heating and cooling technologies for buildings.

Download or read book Commercial Earth Energy Systems written by CANMET Energy Technology Centre (Canada) and published by . This book was released on 2002 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: An earth energy system (EES) is a type of heat pump system that uses the ground or groundwater as a source of energy. This guide provides information needed to understand, plan, oversee, design, build, and manage an EES for heating & cooling applications in commercial & institutional buildings. Chapter 1 provides an introduction to EESs, what they are, where they make the most sense, how they work, and their economics as compared to other heating, ventilating, & air conditioning systems. Chapter 2 describes the different configurations or types of EESs and factors to be considered when selecting an EES. It also introduces the energy efficiency descriptors for heat pumps used in EESs and discusses the importance of energy efficiency in other aspects of buildings. Chapter 3 provides a brief overview of an EES design. Chapter 4 examines other important matters unique to EESs, such as environmental & legal considerations and planning, installation, & maintenance issues. Chapter 5 contains a detailed examination of topics pertaining to heat pump performance & efficiency. Chapter 6 discusses the evaluation & calculation of building loads & energy use. Chapter 7 explains the requirements for sizing heat pumps and ground heat exchangers, and includes sample calculations. Chapter 8 outlines factors to consider in the analysis of an EES investment and includes an economic & financial calculation example. The final chapter addresses practical issues that should be considered in EES design & installation. It also provides a sample performance specification and a list of important information to obtain from suppliers & contractors. Appendices include EES case studies and a glossary.

Download or read book Heat Pumps for Buildings written by A. F. C. Sherratt and published by . This book was released on 1984 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applications of Heat Pumps to Buildings written by A. F. C. Sherratt and published by . This book was released on 1987 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat Recovery and Heat Pumps in Buildings written by Gavin Hamilton and published by . This book was released on 1983-01-01 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat Pumps written by R. D. Heap and published by Spon Press. This book was released on 1983 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technical Options for Energy Conservation in Buildings written by National Conference of States on Building Codes and Standards and published by . This book was released on 1973 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heating and Cooling with Ground Source Heat Pumps in Cold and Moderate Climates written by Vasile Minea and published by CRC Press. This book was released on 2022-04-19 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heating and Cooling with Ground-Source Heat Pumps in Cold and Moderate Climates: Fundamentals and Basic Concepts covers fundamentals and design principles of vertical and horizontal indirect and direct expansion closed-loop, as well as ground and surface-water ground-source heat pump systems. It explains the thermodynamic aspects of mechanical and thermochemical compression cycles of geothermal heat pumps, and describes the energetic, economic, and environmental aspects associated with the use of ground-source heat pump systems for heating and cooling residential and commercial/institutional buildings in moderate and cold climates. Based on the author's more than 30 years of technical experience Focuses on ground-source heat pump technologies that can be successfully applied in moderate and cold climates Discusses technical aspects as well as the most common and uncommon application fields of basic system configurations This work is aimed at designers of HVAC systems, as well as geological, mechanical, and chemical engineers implementing environmentally-friendly heating and cooling technologies for buildings.

Download or read book Heating and Cooling with Ground Source Heat Pumps in Moderate and Cold Climates Two Volume Set written by Vasile Minea and published by CRC Press. This book was released on 2022-07-30 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heating and Cooling with Ground-Source Heat Pumps in Moderate and Cold Climates, Two-Volume Set focuses on the use of very low-temperature geothermal energy for heating and cooling residential, institutional, and industrial buildings, and aims to increase the design community’s awareness and knowledge of the benefits, design, and installation requirements of commercial/institutional building ground-source heat pumps (GSHP). This set helps readers assess applicability, select a GSHP system type, and estimate building thermal load to ensure proper size for ground-source subsystems, appropriate brine and groundwater flow rates, and apt design of building closed-loops with distributed or central geothermal heat pumps. The first volume addresses fundamentals and design principles of vertical and horizontal indirect and direct expansion closed-loop, as well as ground- and surface-water ground-source heat pump systems. It explains the thermodynamic aspects of mechanical and thermochemical compression cycles of geothermal heat pumps, as well as the energetic, economic, and environmental aspects associated with the use of ground-source heat pump systems for heating and cooling residential and commercial/institutional buildings in moderate and cold climates. The second volume focuses on applications and cases studies of ground-source heat pumps in moderate and cold climates. It details technical aspects, as well as the most common and uncommon application fields of basic system configurations. The principles of system integrations and applications in moderate and cold climates are also presented, each followed by case studies. This comprehensive work is aimed at designers of HVAC systems, as well as geological, mechanical, and chemical engineers implementing environmentally-friendly heating and cooling technologies for buildings.

Download or read book Design and Installation of Ground Source Heat Pump Systems for Commercial and Residential Buildings written by and published by . This book was released on 2016 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technical Options for Energy Conservation in Buildings written by Institute for Applied Technology (U.S.). Building Environment Division and published by . This book was released on 1973 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Commercial Energy Auditing Reference Handbook written by Steve Doty and published by The Fairmont Press, Inc.. This book was released on 2011 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Updated and expanded, this edition includes new material on early replacement business justification, lease arrangements and effect on ECM project interest, coordinating upstream/downstream set points, semiconductor fab multi-stage HVAC air tempering, commissioning, HVAC overlapping heating and cooling, and much more. The book begins with the premise that when commercial facilities are subdivided into categories based on business type, many useful patterns can be identified that become generally applicable to the performance of an effective energy audit. The author discusses procedures and guidelines for a wide range of business and building types, such as schools and colleges, restaurants and fast food, hospitals and medical facilities, grocery stores, laboratories, lodging, apartment and office buildings, retail, public safety, data centers, churches and religious facilities, libraries, laundries, and warehouses. He also covers all focal areas of the building energy audit and assessment, including building envelope, lighting, HVAC, controls, heat recovery, thermal storage, electrical systems, and utilities." -- Publisher.

Download or read book Heat Exchanger Design Handbook Second Edition written by Kuppan Thulukkanam and published by CRC Press. This book was released on 2013-05-20 with total page 1275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely revised and updated to reflect current advances in heat exchanger technology, Heat Exchanger Design Handbook, Second Edition includes enhanced figures and thermal effectiveness charts, tables, new chapter, and additional topics––all while keeping the qualities that made the first edition a centerpiece of information for practicing engineers, research, engineers, academicians, designers, and manufacturers involved in heat exchange between two or more fluids. See What’s New in the Second Edition: Updated information on pressure vessel codes, manufacturer’s association standards A new chapter on heat exchanger installation, operation, and maintenance practices Classification chapter now includes coverage of scrapped surface-, graphite-, coil wound-, microscale-, and printed circuit heat exchangers Thorough revision of fabrication of shell and tube heat exchangers, heat transfer augmentation methods, fouling control concepts and inclusion of recent advances in PHEs New topics like EMbaffle®, Helixchanger®, and Twistedtube® heat exchanger, feedwater heater, steam surface condenser, rotary regenerators for HVAC applications, CAB brazing and cupro-braze radiators Without proper heat exchanger design, efficiency of cooling/heating system of plants and machineries, industrial processes and energy system can be compromised, and energy wasted. This thoroughly revised handbook offers comprehensive coverage of single-phase heat exchangers—selection, thermal design, mechanical design, corrosion and fouling, FIV, material selection and their fabrication issues, fabrication of heat exchangers, operation, and maintenance of heat exchangers —all in one volume.

Download or read book Geothermal Heating and Cooling written by Stephen P. Kavanaugh and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal Heating and Cooling is a complete revision of Ground-Source Heat Pumps: Design of Geothermal Systems for Commercial and Institutional Buildings, which is recognized as the primary reference for nonresidential ground-source heat pump (GSHP) installations. This new work takes advantage of the many lessons learned since the time of the original publication, when GSHPs were primarily residential applications. Many improvements have evolved, and performance data, both positive and negative, is now available to guide the development of best practices. This essential guide for HVAC design engineers, design-build contractors, GSHP subcontractors, and energy/construction managers also provides building owners and architects with insights into characteristics of quality engineering firms and the information that should be provided by design firms competing for GSHP projects.This revision draws on new ASHRAE and industry research in critical areas, as well as measured data from long-term installations and optimized installation practices used by high-production GSHP contractors. Nearly all chapters and appendices were completely rewritten, and they include coverage of closed-loop ground (ground-coupled), groundwater, and surface-water systems plus GSHP equipment and piping. Additional information on site characterization has been added, including a new hydrogeological chapter. Another new chapter contains results of recent field studies, energy and demand characteristics, and updated information to optimize GSHP system cost. While other publications deal primarily with ground-coupled heat pumps, this text includes detailed coverage of groundwater, surface-water, and GSHP costs.Tables, graphs, and equations are provided in both Inch-Pound (I-P) and International System (SI) units. As a bonus, supplemental Microsoft® Excel® macro-enabled spreadsheets for a variety of GSHP calculations accompany the text.