Download or read book Heat Radiation from Flares written by Selma E. Guigard and published by The Branch. This book was released on 2000 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Elsevier. This book was released on 2005-01-25 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field
Download or read book Encyclopedia of Chemical Processing and Design written by John J. McKetta Jr and published by CRC Press. This book was released on 1992-08-20 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Written by engineers for engineers (with over 150 International Editorial Advisory Board members),this highly lauded resource provides up-to-the-minute information on the chemical processes, methods, practices, products, and standards in the chemical, and related, industries. "
Download or read book Fluid Mechanics Heat Transfer and Mass Transfer written by K. S. Raju and published by John Wiley & Sons. This book was released on 2011-04-20 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This broad-based book covers the three major areas of Chemical Engineering. Most of the books in the market involve one of the individual areas, namely, Fluid Mechanics, Heat Transfer or Mass Transfer, rather than all the three. This book presents this material in a single source. This avoids the user having to refer to a number of books to obtain information. Most published books covering all the three areas in a single source emphasize theory rather than practical issues. This book is written with emphasis on practice with brief theoretical concepts in the form of questions and answers, not adopting stereo-typed question-answer approach practiced in certain books in the market, bridging the two areas of theory and practice with respect to the core areas of chemical engineering. Most parts of the book are easily understandable by those who are not experts in the field. Fluid Mechanics chapters include basics on non-Newtonian systems which, for instance find importance in polymer and food processing, flow through piping, flow measurement, pumps, mixing technology and fluidization and two phase flow. For example it covers types of pumps and valves, membranes and areas of their use, different equipment commonly used in chemical industry and their merits and drawbacks. Heat Transfer chapters cover the basics involved in conduction, convection and radiation, with emphasis on insulation, heat exchangers, evaporators, condensers, reboilers and fired heaters. Design methods, performance, operational issues and maintenance problems are highlighted. Topics such as heat pipes, heat pumps, heat tracing, steam traps, refrigeration, cooling of electronic devices, NOx control find place in the book. Mass transfer chapters cover basics such as diffusion, theories, analogies, mass transfer coefficients and mass transfer with chemical reaction, equipment such as tray and packed columns, column internals including structural packings, design, operational and installation issues, drums and separators are discussed in good detail. Absorption, distillation, extraction and leaching with applications and design methods, including emerging practices involving Divided Wall and Petluk column arrangements, multicomponent separations, supercritical solvent extraction find place in the book.
Download or read book The John Zink Hamworthy Combustion Handbook written by Charles E. Baukal Jr. and published by CRC Press. This book was released on 2012-12-13 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the length of time it has been around, its importance, and vast amounts of research, combustion is still far from being completely understood. Environmental, cost, and fuel consumption issues add further complexity, particularly in the process and power generation industries. Dedicated to advancing the art and science of industrial combusti
Download or read book The John Zink Hamworthy Combustion Handbook Second Edition written by Charles E. Baukal, Jr. and published by CRC Press. This book was released on 2012-12-13 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the length of time it has been around, its importance, and vast amounts of research, combustion is still far from being completely understood. Environmental, cost, and fuel consumption issues add further complexity, particularly in the process and power generation industries. Dedicated to advancing the art and science of industrial combustion, The John Zink Hamworthy Combustion Handbook, Second Edition: Volume One – Fundamentals gives you a strong understanding of the basic concepts and theory. Under the leadership of Charles E. Baukal, Jr., top combustion engineers and technologists from John Zink Hamworthy Combustion examine the interdisciplinary fundamentals—including chemistry, fluid flow, and heat transfer—as they apply to industrial combustion. What’s New in This Edition Expanded to three volumes, with Volume One focusing on fundamentals Extensive updates and revisions throughout Updated information on HPI/CPI industries, including alternative fuels, advanced refining techniques, emissions standards, and new technologies Expanded coverage of the physical and chemical principles of combustion New practices in coal combustion, such as gasification The latest developments in cold-flow modeling, CFD-based modeling, and mathematical modeling Greater coverage of pollution emissions and NOx reduction techniques New material on combustion diagnostics, testing, and training More property data useful for the design and operation of combustion equipment Coverage of technologies such as metallurgy, refractories, blowers, and vapor control equipment Now expanded to three volumes, the second edition of the bestselling The John Zink Combustion Handbook continues to provide the comprehensive coverage, up-to-date information, and visual presentation that made the first edition an industry standard. Featuring color illustrations and photographs throughout, Volume One: Fundamentals helps you broaden your understanding of industrial combustion to better meet the challenges of this field. For the other volumes in the set, see The John Zink Hamworthy Combustion Handbook, Second Edition: Three-Volume Set.
Download or read book Solar and Stellar Flares written by Bernhard M. Haisch and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: concert at Dinkelspiel Auditorium 'An Evening of Songs and Arias' hosted by Dr Kip Cranna of San Francisco Opera, produced and directed by Elizabeth Tucker, and featuring soprano Ellie Holt Murray, mezzo-soprano Marsha Sims; tenor Richard Walker, and baritone David Taft Kekuewa, with piano accompaniment by Mark Haffner, staff coach for San Francisco Opera. Two scientific themes clearly emerged from this conference: (1) the key to progress in flare research lies in a multispectral approach with as much temporal resolution as the photon fluxes allow; and (2) the key to understanding the physics lies in a dynamic interaction between solar and stellar investigations and investigators. During the eight sessions solar and stellar topics were balanced and intermixed in 33 invited and oral presentations. We are particularly pleased that these proceedings will be the springboard to publication of solar-stellar articles in the journal Solar Physics. In addition, 115 very exciting posters were also displayed and a companion volume containing many of these is available as a publication of the Catania Astrophysical Observatory. We dedicate this book to the Solar Maximum Mission and to the Flare Star Consor tium. To all our solar-stellar friends and colleagues: 'Thank you!' BERNHARD M. HAISCH and MARCELLO RODONO 28 March. 1989 AN OVERVIEW OF SOLAR AND STELLAR FLARE RESEARCH BERNHARD M. HAlSCH Div. 91-30. Bldg. 255. Lockheed Palo Alto Research Laboratory. 3251 Hanover St .• Palo Alto. CA 94304. U.S.A.
Download or read book The John Zink Combustion Handbook written by Jr., Charles E. Baukal and published by CRC Press. This book was released on 2001-03-27 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the length of time it has been around, its importance, and vast amounts of research, combustion is still far from being completely understood. Industrial applications of combustion add environmental, cost, and fuel consumption issues to its fundamental complexity, and the process and power generation industries in particular present their o
Download or read book Ludwig s Applied Process Design for Chemical and Petrochemical Plants written by A. Kayode Coker and published by Elsevier. This book was released on 2011-08-30 with total page 1023 pages. Available in PDF, EPUB and Kindle. Book excerpt: This complete revision of Applied Process Design for Chemical and Petrochemical Plants, Volume 1 builds upon Ernest E. Ludwig's classic text to further enhance its use as a chemical engineering process design manual of methods and proven fundamentals. This new edition includes important supplemental mechanical and related data, nomographs and charts. Also included within are improved techniques and fundamental methodologies, to guide the engineer in designing process equipment and applying chemical processes to properly detailed equipment.All three volumes of Applied Process Design for Chemical and Petrochemical Plants serve the practicing engineer by providing organized design procedures, details on the equipment suitable for application selection, and charts in readily usable form. Process engineers, designers, and operators will find more chemical petrochemical plant design data in:Volume 2, Third Edition, which covers distillation and packed towers as well as material on azeotropes and ideal/non-ideal systems.Volume 3, Third Edition, which covers heat transfer, refrigeration systems, compression surge drums, and mechanical drivers.A. Kayode Coker, is Chairman of Chemical & Process Engineering Technology department at Jubail Industrial College in Saudi Arabia. He's both a chartered scientist and a chartered chemical engineer for more than 15 years. and an author of Fortran Programs for Chemical Process Design, Analysis and Simulation, Gulf Publishing Co., and Modeling of Chemical Kinetics and Reactor Design, Butterworth-Heinemann. - Provides improved design manuals for methods and proven fundamentals of process design with related data and charts - Covers a complete range of basic day-to-day petrochemical operation topics with new material on significant industry changes since 1995.
Download or read book A Thermal nonthermal Approach to Solar Flares written by Stephen G. Benka and published by . This book was released on 1991 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion and Incineration Processes written by Walter R. Niessen and published by CRC Press. This book was released on 2002-02-28 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering each aspect of an incineration facility, from contaminant receipt and storage to stack discharge and dispersion, this reference explores the operation and evaluation of incineration systems for hazardous and non-hazardous gaseous, liquid, sludge, and solid wastes. Highlighting breakthroughs in air pollution control, the book discusses adva
Download or read book Process Engineering and Design Using Visual Basic Second Edition written by Arun Datta and published by CRC Press. This book was released on 2013-09-20 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software tools are a great aid to process engineers, but too much dependence on such tools can often lead to inappropriate and suboptimal designs. Reliance on software is also a hindrance without a firm understanding of the principles underlying its operation, since users are still responsible for devising the design. In Process Engineering and Design Using Visual Basic, Arun K. Datta provides a unique and versatile suite of programs along with simultaneous development of the underlying concepts, principles, and mathematics. Each chapter details the theory and techniques that provide the basis for design and engineering software and then showcases the development and utility of programs developed using the material outlined in the chapter. This all-inclusive guide works systematically from basic mathematics to fluid mechanics, separators, overpressure protection, and glycol dehydration, providing basic design guidelines based on international codes. Worked examples demonstrate the utility of each program, while the author also explains problems and limitations associated with the simulations. After reading this book you will be able to immediately put these programs into action and have total confidence in the result, regardless of your level of experience. Companion Visual Basic and Excel files are available for download on under the "Downloads/Updates" tab on this web page.
Download or read book From Landfill Gas to Energy written by Vasudevan Rajaram and published by CRC Press. This book was released on 2011-12-15 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Converting old landfills to energy producing sites, while capturing emitted greenhouse gases, has faced numerous technical, financial and social challenges and developments lately. Also, the re-mining of landfills to recover useful land in dense urban areas and proper landfill closure has been a subject of discussion and investigation. Designed as an overview text for landfill management from cradle to grave, this volume’s content stretches from the fundamentals to the rather indepth details. By putting down their joint international experience, the authors have intended to both guide and inspire the user for his or her landfill project. Introducing the fundamental concepts of landfill gas management and its needs and importance in the present world energy scenario, this accessible reference volume presents key landfill gas management techniques at regional, national and global levels. In detail, it gives an account of the recent technologies available for landfill gas treatment and its utilization. It summarizes landfill gas prediction models developed in various parts of the world and details their adequacy in various field conditions. Covering both landfill remediation aspects and economic considerations while selecting a landfill gas to energy utilization project, the reader gets familiar with the practical aspects of converting a landfill site. Also, the challenges faced by municipalities and landfill operators in recovering landfill gas as an energy source are described, and solutions are suggested for solving them effectively. These include practical execution problems, governmental issues, and developing policies to encourage investment. The volume also includes various case studies of landfill gas-to-energy utilization projects from around the world, which can be reviewed and customized for the reader’s own application with the help of extensive reference section. Intended as an overview text for advanced students and researchers in the relevant engineering and technology fields (Environmental, Civil, Geotechnical, Chemical, Mechanical and Electrical), this book will also be particularly helpful to practitioners such as municipal managers, landfill operators, designers, solid waste management engineers, urban planners, professional consultants, scientists, non-governmental organizations and entrepreneurs.
Download or read book Industrial Combustion Pollution and Control written by Jr., Charles E. Baukal and published by CRC Press. This book was released on 2003-10-15 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference overflows with an abundance of experimental techniques, simulation strategies, and practical applications useful in the control of pollutants generated by combustion processes in the metals, minerals, chemical, petrochemical, waste, incineration, paper, glass, and foods industries. The book assists engineers as they attempt to meet e
Download or read book The Slipcover for The John Zink Hamworthy Combustion Handbook written by Charles E. Baukal Jr. and published by CRC Press. This book was released on 2018-10-03 with total page 1677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the length of time it has been around, its importance, and vast amounts of research, combustion is still far from being completely understood. Issues regarding the environment, cost, and fuel consumption add further complexity, particularly in the process and power generation industries. Dedicated to advancing the art and science of industr
Download or read book Guidelines for Siting and Layout of Facilities written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2018-04-24 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written to address many of the developments since the 1st Edition which have improved how companies survey and select new sites, evaluate acquisitions, or expand their existing facilities. This book updates the appendices containing both the recommended separation distances and the checklists to help the teams obtain the information they need when locating the facility within a community, when arranging the processes within the facility, and when arranging the equipment within the process units.
