Download or read book Porous Materials written by Juan Carlos Moreno-Piraján and published by Springer Nature. This book was released on 2021-03-10 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written in honor of Prof. Francisco Rodriguez-Reinoso, who has made significant contributions in the area of porous materials such as active carbons and graphenes. It details the preparation of porous materials, including carbonaceous, zeolitic, and siliceous materials, MOFs, aerogels, and xerogels, describing the characterization techniques and the interpretation of the results, and highlighting common errors that can occur during the process. This book subsequently presents the use of modeling based on thermodynamics to describe the materials. Lastly, it illustrates a number of current environmental protection applications in the context of both water and air.
Download or read book Heat of Wetting of Porous Solids in Relation to Their Surface Area written by Balwant Rai Puri and published by . This book was released on 1957 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization of Porous Solids VII written by Philip Llewellyn and published by Elsevier. This book was released on 2006-08-07 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 7th International Symposium on the Characterization of Porous Solids (COPS-VII) was held in the Congress Centre in Aix-en-Provence between the 25th-28th May 2005. The symposium covered recent results of fundamental and applied research on the characterization of porous solids. Papers relating to characterization methods such as gas adsorption and liquid porosimetry, X-ray techniques and microscopic measurements as well as the corresponding molecular modelling methods were given. These characterization methods were shown to be applied to all types of porous solids such as clays, carbons, ordered mesoporous materials, porous glasses, oxides, zeolites and metal organic frameworks. * 36 oral presentations and 166 posters and around 230 guests from 27 countries. * A large part of this symposium was devoted to the use computational methods to characterise porous solids
Download or read book Handbook of Thermal Analysis and Calorimetry written by Michael E. Brown and published by Elsevier. This book was released on 2003-12-08 with total page 943 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume of a four volume set intended to describe the techniques and applications of thermoanalytical and calorimetric methods. The general techniques and methodology are covered extensively in Volume 1, along with the fundamental physicochemical background needed. Consequently the subsequent volumes dwell on the applications of these powerful and versatile methods, while assuming a familiarity with the techniques.Volume 2 covers major areas of inorganic materials and some related general topics, e.g., catalysis, geochemistry, and the preservation of art. The chapters are written by established practitioners in the field with the intent of presenting a sampling of the how thermoanalytical and calorimetric methods have contributed to progress in their respective areas. The chapters are not intended as exhaustive reviews of the topics, but rather, to illustrate to the readers what has been achieved and to encourage them to consider extending these applications further into their domains of interest.- Provides an appreciation for how thermal methods can be applied to inorganic materials and processes.- Provides an insight into the versatility of thermal methods.- Shares the experiences of experts in a variety of different fields.- A valuable reference source covering a huge area of materials coverage.
Download or read book Characterisation of Porous Solids written by Sidney John Gregg and published by . This book was released on 1979 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adsorption by Powders and Porous Solids written by Jean Rouquerol and published by Academic Press. This book was released on 2013-09-06 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The declared objective of this book is to provide an introductory review of the various theoretical and practical aspects of adsorption by powders and porous solids with particular reference to materials of technological importance. The primary aim is to meet the needs of students and non-specialists who are new to surface science or who wish to use the advanced techniques now available for the determination of surface area, pore size and surface characterization. In addition, a critical account is given of recent work on the adsorptive properties of activated carbons, oxides, clays and zeolites. - Provides a comprehensive treatment of adsorption at both the gas/solid interface and the liquid/solid interface - Includes chapters dealing with experimental methodology and the interpretation of adsorption data obtained with porous oxides, carbons and zeolites - Techniques capture the importance of heterogeneous catalysis, chemical engineering and the production of pigments, cements, agrochemicals, and pharmaceuticals
Download or read book Surface Chemistry written by J. J. Bikerman and published by Elsevier. This book was released on 2013-09-03 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Chemistry Theory and Applications focuses on liquid-gas, liquid-liquid, solid-gas, solid-liquid, and solid-solid surfaces. The book first offers information on liquid-gas surfaces, including surface tension, measurement of surface tension, rate of capillarity rise, capillary attraction, bubble pressure and pore size, and surface tension and temperature. The text then ponders on liquid-liquid and solid-gas surfaces. Discussions focus on surface energy of solids, surface roughness and cleanness, adsorption of gases and vapors, adsorption hysteresis, interfacial tension, and interfacial tension in multicomponent systems. The manuscript takes a look at solid-liquid surfaces, as well as stagnant layers at solid-liquid interfaces, heat transfer, surface roughness or electrodes, adsorption of liquids heat of wetting, and thin metal films condensed from vapor. The text also examines solid-liquid-gas and solid-liquid-liquid surfaces and electric surface phenomena. The book is a vital source of information for readers interested in surface chemistry.
Download or read book Characterization of Porous Solids and Powders Surface Area Pore Size and Density written by S. Lowell and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth of interest in newly developed porous materials has prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. One might consider this new book as the 4th edition of "Powder Surface Area and Porosity" (Lowell & Shields), but for this new edition we set out to incorporate recent developments in the understanding of fluids in many types of porous materials, not just powders. Based on this, we felt that it would be prudent to change the title to "Characterization of Porous Solids and Powders: Surface Area, Porosity and Density". This book gives a unique overview of principles associated with the characterization of solids with regard to their surface area, pore size, pore volume and density. It covers methods based on gas adsorption (both physi and chemisorption), mercury porosimetry and pycnometry. Not only are the theoretical and experimental basics of these techniques presented in detail but also, in light of the tremendous progress made in recent years in materials science and nanotechnology, the most recent developments are described. In particular, the application of classical theories and methods for pore size analysis are contrasted with the most advanced microscopic theories based on statistical mechanics (e.g. Density Functional Theory and Molecular Simulation). The characterization of heterogeneous catalysts is more prominent than in earlier editions; the sections on mercury porosimetry and particularly chemisorption have been updated and greatly expanded.
Download or read book Research Bulletin written by Panjab University and published by . This book was released on 1955 with total page 1766 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Surface and Colloid Science written by P. Somasundaran and published by CRC Press. This book was released on 2006 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Test Operation of a Pneumatic Vibrating blade Planer written by A. G. Sharkey and published by . This book was released on 1966 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Calorimetric Methods for the Characterization of Porous Materials written by Juan Carlos Moreno-Piraján and published by Elsevier. This book was released on 2024-04-01 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Calorimetric Methods for the Characterization of Porous Materials presents calorimetric methods used in the characterization of porous materials using chemical thermodynamics. Among these materials, catalysts, supports and adsorbents (such as Activated Carbon, Metal-Organic-Frameworks, SBA-15, Zeolites, Graphene, Graphite, Carbon Foams) are presented. In addition, the use of calorimetry in the study of catalytic reactions in different phases is explored—applicable to air and wastewater treatment, clean and renewable energies, green chemistry, as well as energy production and storage (Carbon dioxide, methane and hydrogen at high pressure). Chapters summarize basic concepts of thermodynamics and kinetics alongside experimental techniques such as thermal analysis and calorimetry. In addition, information is given about different calorimetric methods that can be used in studies aimed at characterizing the physicochemical properties of adsorbents, supports and solid catalysts, as well as the processes related to the adsorption-desorption phenomena of the reactants and/or products of catalytic reactions. - Addresses the problems involved with the chemical thermodynamics of porous materials, with a significant practical element explaining experimental parameters and how to perform calculations - Presents, in detail, the main instrumental calorimetric methods, including those that must be carefully considered to avoid experimental errors - Demonstrates, step-by-step, how to perform calculations using data obtained from instrumentation to achieve reliable results - Provides novel explanations on how to use calorimetry in catalyst characterization - Allows readers to broaden the spectrum of the application of calorimetry in the study of materials
Download or read book Surfaces and Coatings Related to Paper and Wood written by R. H. Marchessault and published by Syracuse University Press. This book was released on 1967-02 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Transport Processes written by A.S. Mujumdar and published by Elsevier. This book was released on 2013-10-22 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject matter covered in this volume covers a wide scope. It contains critical reviews in many frontier areas of interest to engineers and applied scientists. Multiphase transport ranging from floc breakage to flow through multiphase media is discussed. Difficult problems of bubble growth and devolatilisation from polymeric melts are treated. The question of solid-liquid phase change with flow is considered and the emerging quantitation of web drying technology through mathematical modeling is covered. Transport phenomena in high-tech materials ranging from zeolite catalysts to liquid crystalline materials are covered and formidable problems of transport of gases in porous media, which have implications in many different technologies, are also addressed. Finally, applications of newer techniques in numerical computation of transport processes are highlighted. These authorative, evaluative and timely reviews of topics of current and potential interest will serve the needs of practising engineers as well as academic and industrial researchers.
Download or read book Carbon Based Nanomaterials for Advanced Thermal and Electrochemical Energy Storage and Conversion written by Rajib Paul and published by Elsevier. This book was released on 2019-07-20 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Based Nanomaterials for Advanced Thermal and Electrochemical Energy Storage and Conversion presents a comprehensive overview of recent theoretical and experimental developments and prospects on carbon-based nanomaterials for thermal, solar and electrochemical energy conversion, along with their storage applications for both laboratory and industrial perspectives. Large growth in human populations has led to seminal growth in global energy consumption, hence fossil fuel usage has increased, as have unwanted greenhouse gases, including carbon dioxide, which results in critical environmental concerns. This book discusses this growing problem, aligning carbon nanomaterials as a solution because of their structural diversity and electronic, thermal and mechanical properties. - Provides an overview on state-of-the-art carbon nanomaterials and key requirements for applications of carbon materials towards efficient energy storage and conversion - Presents an updated and comprehensive review of recent work and the theoretical aspects on electrochemistry - Includes discussions on the industrial production of carbon-based materials for energy applications, along with insights from industrial experts
Download or read book Characterization of Porous Solids VI written by and published by Elsevier. This book was released on 2002-11-14 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 99 of the papers that were presented at the 6th in the series of Symposia on Characterization of Porous Solids held in Alicante, Spain, May 2002. Written by leading international specialists in the subject, the contributions represent an up-to-date and authoritative account of recent developments around the world in the major methods used to characterize porous solids. The book is a useful work of reference for anyone interested in characterizing porous solids, such as MCM-41 mesoporous materials, pillared clays, etc. Papers on pore structure determination using gas adsorption feature strongly, together with papers on small angle scattering methods, mercury porosimetry, microcalorimetry, scanning probe microscopies, and image analysis.
