Download or read book Two phase Pressure Drops written by Herbert Stanford Isbin and published by . This book was released on 1954 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Thermal Management of Engines written by P. A. Lakshminarayanan and published by Springer Nature. This book was released on 2022-01-01 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook deals with the vast subject of thermal management of engines and vehicles by applying the state of the art research to diesel and natural gas engines. The contributions from global experts focus on management, generation, and retention of heat in after-treatment and exhaust systems for light-off of NOx, PM, and PN catalysts during cold start and city cycles as well as operation at ultralow temperatures. This book will be of great interest to those in academia and industry involved in the design and development of advanced diesel and CNG engines satisfying the current and future emission standards.
Download or read book Modeling Engine Spray and Combustion Processes written by Gunnar Stiesch and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The utilization of mathematical models to numerically describe the performance of internal combustion engines is of great significance in the development of new and improved engines. Today, such simulation models can already be viewed as standard tools, and their importance is likely to increase further as available com puter power is expected to increase and the predictive quality of the models is constantly enhanced. This book describes and discusses the most widely used mathematical models for in-cylinder spray and combustion processes, which are the most important subprocesses affecting engine fuel consumption and pollutant emissions. The relevant thermodynamic, fluid dynamic and chemical principles are summarized, and then the application of these principles to the in-cylinder processes is ex plained. Different modeling approaches for the each subprocesses are compared and discussed with respect to the governing model assumptions and simplifica tions. Conclusions are drawn as to which model approach is appropriate for a specific type of problem in the development process of an engine. Hence, this book may serve both as a graduate level textbook for combustion engineering stu dents and as a reference for professionals employed in the field of combustion en gine modeling. The research necessary for this book was carried out during my employment as a postdoctoral scientist at the Institute of Technical Combustion (ITV) at the Uni versity of Hannover, Germany and at the Engine Research Center (ERC) at the University of Wisconsin-Madison, USA.
Download or read book Introduction to Internal Combustion Engines written by Richard Stone and published by Bloomsbury Publishing. This book was released on 2017-09-16 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its fourth edition, this textbook remains the indispensable text to guide readers through automotive or mechanical engineering, both at university and beyond. Thoroughly updated, clear, comprehensive and well-illustrated, with a wealth of worked examples and problems, its combination of theory and applied practice aids in the understanding of internal combustion engines, from thermodynamics and combustion to fluid mechanics and materials science. This textbook is aimed at third year undergraduate or postgraduate students on mechanical or automotive engineering degrees. New to this Edition: - Fully updated for changes in technology in this fast-moving area - New material on direct injection spark engines, supercharging and renewable fuels - Solutions manual online for lecturers
Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer Science & Business Media. This book was released on 2010-03-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.
Download or read book Transactions of the American Foundrymen s Society written by American Foundrymen's Society and published by . This book was released on 1998 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion and Mass Transfer written by D Brian Spalding and published by Elsevier. This book was released on 2013-10-22 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion and Mass Transfer: A Textbook with Multiple-Choice Exercises for Engineering Students is a 20-chapter lecture text that covers various aspects of combustion and mass transfer. Each of the 20 chapters is provided with a set partly analytical and multiple-choice tutorial exercises, designed to assist the student to understand the material of the lectures. The opening chapters deal with the importance of combustion and mass transfer processes. The succeeding chapters survey the concepts and principles of droplet vaporization, droplet combustion, liquid-propellant rocket, and laminar and turbulent jet. These topics are followed by discussions of laminar and turbulent diffusion flame, kinetically-influenced phenomena, chemical kinetics, and spontaneous ignition. The remaining chapters consider the basic concepts of stirred reactor, flame stabilization, laminar flame propagation, spark ignition, and coal-particle combustion. This book is intended for undergraduate mechanical engineering students.
Download or read book Droplets and Sprays written by Sergei Sazhin and published by Springer. This book was released on 2014-05-19 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a clear and systematic description of droplets and spray dynamic models, this book maximises reader insight into the underlying physics of the processes involved, outlines the development of new physical and mathematical models and broadens understanding of interactions between the complex physical processes which take place in sprays. Complementing approaches based on the direct application of computational fluid dynamics (CFD), Droplets and Sprays treats both theoretical and practical aspects of internal combustion engine process such as the direct injection of liquid fuel, subcritical heating and evaporation. Including case studies that illustrate the approaches relevance to automotive applications, it is also anticipated that the described models can find use in other areas such as in medicine and environmental science.
Download or read book Reducing Particulate Emissions in Gasoline Engines written by Thorsten Boger and published by SAE International. This book was released on 2018-11-28 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: For years, diesel engines have been the focus of particulate matter emission reductions. Now, however, modern diesel engines emit less particles than a comparable gasoline engine. This transformation necessitates an introduction of particulate reduction strategies for the gasoline-powered vehicle. Many strategies can be leveraged from diesel engines, but new combustion and engine control technologies will be needed to meet the latest gasoline regulations across the globe. Particulate reduction is a critical health concern in addition to the regulatory requirements. This is a vital issue with real-world implications. Reducing Particulate Emissions in Gasoline Engines encompasses the current strategies and technologies used to reduce particulates to meet regulatory requirements and curtail health hazards - reviewing principles and applications of these techniques. Highlights and features in the book include: Gasoline particulate filter design, function and applications Coated and uncoated three way catalyst design and integration Measurement of gasoline particulate matter emission, both laboratory and PEMS The goal is to provide a comprehensive assessment of gasoline particulate emission control to meet regulatory and health requirements - appealing to calibration, development and testing engineers alike.
Download or read book Internal Combustion Engines written by Colin R. Ferguson and published by John Wiley & Sons. This book was released on 2015-07-01 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the Second Edition in 2001, there have been considerable advances and developments in the field of internal combustion engines. These include the increased importance of biofuels, new internal combustion processes, more stringent emissions requirements and characterization, and more detailed engine performance modeling, instrumentation, and control. There have also been changes in the instructional methodologies used in the applied thermal sciences that require inclusion in a new edition. These methodologies suggest that an increased focus on applications, examples, problem-based learning, and computation will have a positive effect on learning of the material, both at the novice student, and practicing engineer level. This Third Edition mirrors its predecessor with additional tables, illustrations, photographs, examples, and problems/solutions. All of the software is ‘open source’, so that readers can see how the computations are performed. In addition to additional java applets, there is companion Matlab code, which has become a default computational tool in most mechanical engineering programs.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1972 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings written by and published by . This book was released on 1995 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Internal Combustion Engines written by Allan T. Kirkpatrick and published by John Wiley & Sons. This book was released on 2020-11-23 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive resource covering the foundational thermal-fluid sciences and engineering analysis techniques used to design and develop internal combustion engines Internal Combustion Engines: Applied Thermosciences, Fourth Edition combines foundational thermal-fluid sciences with engineering analysis techniques for modeling and predicting the performance of internal combustion engines. This new 4th edition includes brand new material on: New engine technologies and concepts Effects of engine speed on performance and emissions Fluid mechanics of intake and exhaust flow in engines Turbocharger and supercharger performance analysis Chemical kinetic modeling, reaction mechanisms, and emissions Advanced combustion processes including low temperature combustion Piston, ring and journal bearing friction analysis The 4th Edition expands on the combined analytical and numerical approaches used successfully in previous editions. Students and engineers are provided with several new tools for applying the fundamental principles of thermodynamics, fluid mechanics, and heat transfer to internal combustion engines. Each chapter includes MATLAB programs and examples showing how to perform detailed engineering computations. The chapters also have an increased number of homework problems with which the reader can gauge their progress and retention. All the software is ‘open source’ so that readers can see in detail how computational analysis and the design of engines is performed. A companion website is also provided, offering access to the MATLAB computer programs.
Download or read book Proceedings of the third International Conference on Automotive and Fuel Technology written by and published by Allied Publishers. This book was released on 2004 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Internal Combustion Engine Fundamentals written by John B. Heywood and published by McGraw-Hill Education. This book was released on 1988 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text, by a leading authority in the field, presents a fundamental and factual development of the science and engineering underlying the design of combustion engines and turbines. An extensive illustration program supports the concepts and theories discussed.
Download or read book Droplets and Sprays Simple Models of Complex Processes written by Sergei S. Sazhin and published by Springer Nature. This book was released on 2022-06-28 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book acts as a guide to simple models that describe some of the complex fluid dynamics, heat/mass transfer and combustion processes in droplets and sprays. Attention is focused mainly on the use of classical hydrodynamics, and a combination of kinetic and hydrodynamic models, to analyse the heating and evaporation of mono- and multi-component droplets. The models were developed for cases when small and large numbers of components are present in droplets. Some of these models are used for the prediction of time to puffing/micro-explosion of composite water/fuel droplets — processes that are widely used in combustion devices to stimulate disintegration of relatively large droplets into smaller ones. The predictions of numerical codes based on these models are validated against experimental results where possible. In most of the models, droplets are assumed to be spherical; some preliminary results of the generalisation of these models to the case of non-spherical droplets, approximating them as spheroids, are presented.
Download or read book Handbook of Fluid Dynamics written by Richard W. Johnson and published by CRC Press. This book was released on 2016-04-06 with total page 1544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Fluid Dynamics offers balanced coverage of the three traditional areas of fluid dynamics—theoretical, computational, and experimental—complete with valuable appendices presenting the mathematics of fluid dynamics, tables of dimensionless numbers, and tables of the properties of gases and vapors. Each chapter introduces a different fluid dynamics topic, discusses the pertinent issues, outlines proven techniques for addressing those issues, and supplies useful references for further research. Covering all major aspects of classical and modern fluid dynamics, this fully updated Second Edition: Reflects the latest fluid dynamics research and engineering applications Includes new sections on emerging fields, most notably micro- and nanofluidics Surveys the range of numerical and computational methods used in fluid dynamics analysis and design Expands the scope of a number of contemporary topics by incorporating new experimental methods, more numerical approaches, and additional areas for the application of fluid dynamics Handbook of Fluid Dynamics, Second Edition provides an indispensable resource for professionals entering the field of fluid dynamics. The book also enables experts specialized in areas outside fluid dynamics to become familiar with the field.
