Download or read book Sterilisation of Biomaterials and Medical Devices written by Sophie Lerouge and published by Elsevier. This book was released on 2012-09-27 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effective sterilisation of any material or device to be implanted in or used in close contact with the human body is essential for the elimination of harmful agents such as bacteria. Sterilisation of biomaterials and medical devices reviews established and commonly used technologies alongside new and emerging processes.Following an introduction to the key concepts and challenges involved in sterilisation, the sterilisation of biomaterials and medical devices using steam and dry heat, ionising radiation and ethylene oxide is reviewed. A range of non-traditional sterilisation techniques, such as hydrogen peroxide gas plasma, ozone and steam formaldehyde, is then discussed together with research in sterilisation and decontamination of surfaces by plasma discharges. Sterilisation techniques for polymers, drug-device products and tissue allografts are then reviewed, together with antimicrobial coatings for 'self-sterilisation' and the challenge presented by prions and endotoxins in the sterilisation of reusable medical devices. The book concludes with a discussion of future trends in the sterilisation of biomaterials and medical devices.With its distinguished editors and expert team of international contributors, Sterilisation of biomaterials and medical devices is an essential reference for all materials scientists, engineers and researchers within the medical devices industry. It also provides a thorough overview for academics and clinicians working in this area. - Reviews established and commonly used technologies alongside new and emerging processes - Introduces and reviews the key concepts and challenges involved in sterilisation - Discusses future trends in the sterilisation of biomaterials and medical devices

Download or read book Practical Healthcare Epidemiology written by Ebbing Lautenbach and published by Cambridge University Press. This book was released on 2018-04-19 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: A clear, hands-on outline of best practices for infection prevention that directly improve patient outcomes across the healthcare continuum.

Download or read book A Practical Guide to Decontamination in Healthcare written by Gerald E. McDonnell and published by John Wiley & Sons. This book was released on 2012-05-17 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prevention is the first line of defence in the fight against infection. As antibiotics and other antimicrobials encounter increasing reports of microbial resistance, the field of decontamination science is undergoing a major revival. A Practical Guide to Decontamination in Healthcare is a comprehensive training manual, providing practical guidance on all aspects of decontamination including: microbiology and infection control; regulations and standards; containment, transportation, handling, cleaning, disinfection and sterilization of patient used devices; surgical instrumentation; endoscopes; and quality management systems. Written by highly experienced professionals, A Practical Guide to Decontaminationin Healthcare comprises a systematic review of decontamination methods, with uses and advantages outlined for each. Up-to-date regulations, standards and guidelines are incorporated throughout, to better equip healthcare professionals with the information they need to meet the technical and operational challenges of medical decontamination. A Practical Guide to Decontaminationin Healthcare is an important new volume on state-of-the-art decontamination processes and a key reference source for all healthcare professionals working in infectious diseases, infection control/prevention and decontamination services.

Download or read book Sterility Sterilisation and Sterility Assurance for Pharmaceuticals written by Tim Sandle and published by Elsevier. This book was released on 2013-10-31 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure to adequately control any microbial challenge associated within process or product by robust sterilisation will result in a contaminated marketed product, with potential harm to the patient. Sterilisation is therefore of great importance to healthcare and the manufacturers of medical devices and pharmaceuticals. Sterility, sterilisation and sterility assurance for pharmaceuticals examines different means of rendering a product sterile by providing an overview of sterilisation methods including heat, radiation and filtration. The book outlines and discusses sterilisation technology and the biopharmaceutical manufacturing process, including aseptic filling, as well as aspects of the design of containers and packaging, as well as addressing the cleanroom environments in which products are prepared. Consisting of 18 chapters, the book comprehensively covers sterility, sterilisation and microorganisms; pyrogenicity and bacterial endotoxins; regulatory requirements and good manufacturing practices; and gamma radiation. Later chapters discuss e-beam; dry heat sterilisation; steam sterilisation; sterilisation by gas; vapour sterilisation; and sterile filtration, before final chapters analyse depyrogenation; cleanrooms; aseptic processing; media simulation; biological indicators; sterility testing; auditing; and new sterilisation techniques. - Covers the main sterilisation methods of physical removal, physical alteration and inactivation - Includes discussion of medical devices, aseptically filled products and terminally sterilised products - Describes bacterial, pyrogenic, and endotoxin risks to devices and products

Download or read book Healthcare Sterilisation written by Wayne J Rogers and published by Smithers Rapra. This book was released on 2013-12-30 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ways of sterilisation begin as far back as biblical and roman times, from early beginnings to standardization. Sterilisation evolution has gone through a series of trials and wizardry before it achieved the status of science. And even with a scientific approach, some of its modalities frequently has been referred to as an art (an imaginary focus), while most have achieved a certain scientific standardization. This book provides a drawbridge between history, terminology, environmental and fundamentals of sterilisation that beginners to sterilisation should recognize, but continues with advancements, which supervisors and managers should know and apply. So while providing historical and current sterilisation information, the book also provides interfacial areas with design practices, development, environmental control, material compatibility, microbiology, packaging, process selection, statistics, technical information and validation. This book consists of two volumes (Healthcare Sterilisation, Introduction and Standard Practices: Volume 1, and Healthcare Sterilisation, Challenging Practices: Volume 2). Volume 1 provides an introduction, and an overview of sterilisation on early and classical sterilisation principles such as absolutism and overkill, and steadfast and standard methods. It will help answer some healthcare sterilisation queries such as: what are the origins and evolution of sterilisation? How does environmental control and microbiology affect sterilisation? What are some of the classical as well as standard sterilisation methods? What are the most consistent and reliable sterilisation methods? Is sterilisation in your future? An ounce of prevention is worth a pound of cure. Without sterilisation, infectious disease and contamination would run rampant. Consequently, sterilisation has tremendous value and disease control, and this book provides a three dimensional view of it.

Download or read book Central Service Technical Manual written by IAHCSMM and published by . This book was released on 2016-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Childfree and Sterilized written by Annily Campbell and published by A&C Black. This book was released on 1999-01-01 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the relatively new social and medical phenomenon of women in the developed countries of the world choosing to remain childfree and electing for sterilization rather than continuing with other forms of contraception. Twenty-three voluntarily childfree, sterilized women, aged 22 to 51 years, tell their stories, revealing the struggles they faced in being women without children in a society which expects women to be mothers. They describe the many barriers encountered on the way to being sterilized, including prejudice from those around them as well as hostility and refusal from the medical profession. The women recall how their reasons and decisions were ignored or pathologized by doctors who held unquestioned assumptions about how women should be. Feminist and sociological perspectives are employed to highlight that voluntarily childfree women are perceived as abnormal, not "real" women, and are often the target of negative and critical comment.

Download or read book Sterilisation of Polymer Healthcare Products written by Wayne J. Rogers and published by iSmithers Rapra Publishing. This book was released on 2005 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sterilisation has always been challenging but sterilisation of healthcare products and polymers, especially together is an even greater challenge - how do you sterilise without adversely affecting the end use or the end user? This book discusses all the sterilisation methods used for polymeric healthcare products both traditional and new.

Download or read book Sterilization Technology for the Health Care Facility written by Marimargaret Reichert and published by Jones & Bartlett Learning. This book was released on 1997 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Second Edition is a comprehensive resource on sterilization and disinfection of reusable instruments and medical devices

Download or read book Sterilization of Medical Supplies by Steam written by Jan Huys and published by . This book was released on 2010 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Block s Disinfection Sterilization and Preservation written by Gerald McDonnell and published by Lippincott Williams & Wilkins. This book was released on 2020-06-26 with total page 2941 pages. Available in PDF, EPUB and Kindle. Book excerpt: With more international contributors than ever before, Block’s Disinfection, Sterilization, and Preservation, 6th Edition, is the first new edition in nearly 20 years of the definitive technical manual for anyone involved in physical and chemical disinfection and sterilization methods. The book focuses on disease prevention—rather than eradication—and has been thoroughly updated with new information based on recent advances in the field and understanding of the risks, the technologies available, and the regulatory environments.

Download or read book ANSI AAMI St79 Comprehensive Guide to Steam Sterilization and Sterility Assurance in Health Care Facilities written by Aami and published by Association for the Advancement of Medical Instrumentation (AAMI). This book was released on 2013-10-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The AAMI recommended practice, Comprehensive guide to steam sterilization and sterility assurance in health care facilities, is a breakthrough standard in terms of its scope. AAMI has updated ST79 with the release of ST79:2010/A4:2013. Of particular importance, A4:2013 provides four new figures demonstrating the wrapping of items for steam sterilization and adds an annex focused on Moisture assessment. As of Oct. 25, 2013, purchasers of ST79 will receive ANSI/AAMI ST79:2010 and A1:2010 and A2:2011 and A3:2012 and A4:2014 as a single consolidated document. Among other changes from the 2006 edition of ST79, this revised and expanded second edition of ST79 includes guidance on the use and application of Class 6 emulating indicators, a chemical monitoring device fairly new to the United States. Because ST79 essentially consolidates five AAMI steam sterilization standards (whose content was reviewed and updated to reflect current good practice prior to being incorporated into ST79), it truly is a comprehensive guideline for all steam sterilization activities in healthcare facilities, regardless of the size of the sterilizer or the size of the facility, and provides a resource for all healthcare personnel who use steam for sterilization.

Download or read book Global Gidelines for the Pevention of Surgical Site Infection written by World Health Organization and published by . This book was released on 2017-01-27 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surgical site infections are caused by bacteria that get in through incisions made during surgery. They threaten the lives of millions of patients each year and contribute to the spread of antibiotic resistance. In low- and middle-income countries, 11% of patients who undergo surgery are infected in the process. In Africa, up to 20% of women who have a caesarean section contract a wound infection, compromising their own health and their ability to care for their babies. But surgical site infections are not just a problem for poor countries. In the United States, they contribute to patients spending more than 400 000 extra days in hospital at a cost of an additional US $10 billion per year. No international evidence-based guidelines had previously been available before WHO launched its global guidelines on the prevention of surgical site infection on 3 November 2016, and there are inconsistencies in the interpretation of evidence and recommendations in existing national guidelines. These new WHO guidelines are valid for any country and suitable to local adaptations, and take account of the strength of available scientific evidence, the cost and resource implications, and patient values and preferences.

Download or read book Radiation Sterilization for Health Care Products written by Barry P. Fairand and published by CRC Press. This book was released on 2001-09-26 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on how the radiation process works and how it is applied in sterilizing medical devices and healthcare products, this book provides the latest developments in radiation technology in the form of e-beams, gamma rays, and x-rays. It covers the design and operation of irradiators as well as factors that affect cost and efficiency. It offers readers practical insights on this critical step in healthcare product manufacturing, its current uses, and its related cost concerns. Bringing all the information into one source, Radiation Sterilization for Health Care Products is a uniquely comprehensive resource.

Download or read book Ambulatory and Inpatient Procedures in the United States written by and published by . This book was released on 1998 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Patient Safety and Quality written by Ronda Hughes and published by Department of Health and Human Services. This book was released on 2008 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Nurses play a vital role in improving the safety and quality of patient car -- not only in the hospital or ambulatory treatment facility, but also of community-based care and the care performed by family members. Nurses need know what proven techniques and interventions they can use to enhance patient outcomes. To address this need, the Agency for Healthcare Research and Quality (AHRQ), with additional funding from the Robert Wood Johnson Foundation, has prepared this comprehensive, 1,400-page, handbook for nurses on patient safety and quality -- Patient Safety and Quality: An Evidence-Based Handbook for Nurses. (AHRQ Publication No. 08-0043)." - online AHRQ blurb, http://www.ahrq.gov/qual/nurseshdbk/

Download or read book Antisepsis Disinfection and Sterilization written by Gerald E. McDonnell and published by John Wiley & Sons. This book was released on 2020-07-10 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Antisepsis, Disinfection, and Sterilization: Types, Action, and Resistance, by Gerald E. McDonnell, is a detailed and accessible presentation of the current methods of microbial control. Each major category, such as physical disinfection methods, is given a chapter, in which theory, spectrum of activity, advantages, disadvantages, and modes of action of the methods are thoroughly and clearly presented. Sufficient background on the life cycles and general anatomy of microorganisms is provided so that the reader who is new to microbiology will better appreciate how physical and chemical biocides work their magic on microbes. Other topics in the book include: Evaluating the efficacy of chemical antiseptics and disinfectants, and of physical methods of microbial control and sterilization. Understanding how to choose the proper biocidal product and process for specific applications. Classic physical and chemical disinfection methods, such as heat, cold, non-ionizing radiation, acids, oxidizing agents, and metals. Newer chemical disinfectants, including, isothiazolones, micro-and nano-particles, and bacteriophages as control agents. Antisepsis of skin and wounds and the biocides that can be used as antiseptics. Classic methods of physical sterilization, such as, moist heat and dry heat sterilization, ionizing radiation, and filtration, along with newer methods, including, the use of plasma or pulsed light. Chemical sterilization methods that use ethylene oxide, formaldehyde, or a variety of other oxidizing agents. A detailed look at the modes of action of biocides in controlling microbial growth and disrupting microbial physiology. Mechanisms that microorganisms use to resist the effects of biocides. The second edition of Antisepsis, Disinfection, and Sterilization: Types, Action, and Resistance is well suited as a textbook and is outstanding as a reference book for facilities managers and application engineers in manufacturing plants, hospitals, and food production facilities. It is also essential for public health officials, healthcare professionals, and infection control practitioners.