Download or read book HDPE Production via Gas Phase Process Cost Analysis HDPE E14A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of High Density Polyethylene (HDPE) bimodal production from polymer grade (PG) ethylene and 1-butene using a gas-phase process. The process examined is similar to LyondellBasell Spherilene process. This report was developed based essentially on the following reference(s): Keywords: Ethene, PE, Fluidized Bed, Butylene
Download or read book HDPE Production via Gas Phase Process Cost Analysis HDPE E12A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of High Density Polyethylene (HDPE) bimodal production from polymer grade (PG) ethylene and 1-butene using a gas phase process. The process examined is similar to Univation UNIPOL process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) Keywords: Ethene, PE, Butylene, Copolymer
Download or read book HDPE Production via Gas Phase Process Cost Analysis HDPE E32A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of High Density Polyethylene (HDPE) production from polymer grade (PG) ethylene using a gas phase process. The process examined is similar to LyondellBasell Spherilene process. This report was developed based essentially on the following reference(s): Keywords: Ethene, PE, Gas Reactor, Homopolymer
Download or read book HDPE Production via Gas Phase Process Cost Analysis HDPE E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of High Density Polyethylene (HDPE) bimodal production from polymer grade (PG) ethylene and 1-hexene using a gas-phase process. The process examined is similar to LyondellBasell Spherilene process. This report was developed based essentially on the following reference(s): (1) LyondellBasell, "Licensed Polyolefin Technologies and Services - Spherilene" (2) "Polyethylene," Ullmann's Encyclopedia of Industrial Chemistry, 2011 Keywords: Ethene, Bimodal, Fluidized Bed
Download or read book HDPE Production via Gas Phase Process Cost Analysis HDPE E33A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of High Density Polyethylene (HDPE) production from polymer grade (PG) ethylene using a gas phase process. The process examined is similar to Univation UNIPOL and INEOS Innovene G processes. This report was developed based essentially on the following reference(s): Keywords: Ethene, PE, Gas Reactor, Homopolymer
Download or read book HDPE Production via Slurry Loop Process Cost Analysis HDPE E13A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of High Density Polyethylene (HDPE) bimodal production from polymer grade (PG) ethylene and 1-butene using a slurry loop process. The process examined is similar to Borealis BORSTAR process. This process is based on a dual reactor system (slurry and gas phase reactors) to produce HDPE bimodal polymer. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) Keywords: Ethene, PE, Butylene, Loop Reactor, Slurry Reactor, Gas Reactor, Copolymer
Download or read book HDPE Production via Slurry Loop Process Cost Analysis HDPE E22A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of High Density Polyethylene (HDPE) bimodal production from polymer grade (PG) ethylene and 1-hexene using a slurry loop process. The process described is similar to Chevron Phillips’ MarTECH Advanced Dual Loop (ADL) technology and INEOS Innovene S processes. In this study, the polymerization reaction yielding bimodal HDPE is carried out in a dual loop reactor. This report was developed based essentially on the following reference(s): (1) US Patent 9340629, issued to Chevron in 2016 (2) US Patent 7629421, issued to Chevron in 2009 Keywords: Ethene, PE, Loop Reactor, Slurry Reactor, Copolymer
Download or read book HDPE Production via Slurry Loop Process Cost Analysis HDPE E31A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Homopolymer High Density Polyethylene (HDPE) production starting from polymer grade (PG) ethylene using a slurry loop process. The process described is a slurry loop reactor process, similar to Chevron Phillips MarTECH and INEOS Innovene S. In this study, it is considered a single loop reactor polymerization for production of homopolymer HDPE. This report was developed based essentially on the following reference(s): US Patent 20140256889A1, issued to Chevron Phillips Chemical Company Keywords: Ethene, PE, Loop Reactor, Slurry Reactor, Homopolymer
Download or read book HDPE Production via Slurry Process Cost Analysis HDPE E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of High Density Polyethylene (HDPE) bimodal production from polymer grade (PG) ethylene and 1-butene using a slurry process. The process examined is similar to LyondellBasell Hostalen process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): LyondellBasell, "Licensed Polyolefin Technologies and Services - Hostalen" Keywords: Ethene, Bimodal, Multimodal, CSTR, Advanced Cascade Process, ACP, Butylene
Download or read book LLDPE Production via Gas Phase Process Cost Analysis LLDPE E31A written by Intratec and published by Intratec Solutions. This book was released on 2016-03-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Low Density Polyethylene (LLDPE) production from polymer grade (PG) ethylene and 1-butene using a gas phase process. The process examined is similar to Univation UNIPOL and INEOS Innovene G processes. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): (1) US Patent 8957167, issued to Univation in 2015; (2) US Patent 20030171512, issued to Univation in 2003 Keywords: Ethene, PE, Gas Reactor, Copolymer
Download or read book LLDPE Production via Gas Phase Process Cost Analysis LLDPE E22A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Low Density Polyethylene (LLDPE) production from polymer grade (PG) ethylene and 1-hexene using a gas phase process. The process examined is similar to Univation UNIPOL and INEOS Innovene G processes. This report was developed based essentially on the following reference(s): (1) US Patent 8957167, issued to Univation in 2015 (2) US Patent 20030171512, issued to Univation in 2003 Keywords: Ethene, PE, Gas Reactor, Copolymer
Download or read book Because He Said So written by Talin Aintablian and published by . This book was released on 2014-09-16 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many people still struggle with believing and trusting in God completely without a trace of doubt. They are oblivious to how to use the tools given to them as believers. In Because He Said So, author Talin Aintablian explains in practical ways how to have faith and confidence in God to the fullest, while challenging the reader to put faith to work step-by-step in order to see the desired results. With humor and sarcasm, she shares her innermost feelings on issues that anyone faces every day within families, churches, and relationships. Stories of her personal encounters with the spirit world will have you at the edge of your seat as she elaborates in specific detail the problems she faced for most of her young life. Talin learned the long hard way of how to be a strong individual in a crazy world, and believe in God's Word for what it is just Because He Said So.
Download or read book HDPE Production via Slurry Loop Process Cost Analysis HDPE E31A written by Intratec and published by Intratec Solutions. This book was released on 2016-03-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Homopolymer High Density Polyethylene (HDPE) production starting from polymer grade (PG) ethylene using a slurry loop process. The process described is a slurry loop reactor process, similar to Chevron Phillips CPChem and INEOS Innovene S. In this study, it is considered a single loop reactor polymerization for production of homopolymer HDPE. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): US Patent 20140256889A1, issued to Chevron Phillips Chemical Company Keywords: Ethene, PE, Loop Reactor, Slurry Reactor, Homopolymer
Download or read book USMLE Step 1 Qbook written by Michael Manley and published by Kaplan. This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Features: *Hundreds of exam-style questions in USMLE vignette format *Comprehensive and detailed explanations of the correct and incorrect answer choices *Coverage of the most exam-relevant subjects to help students prepare efficiently *Test-taking and study strategies guides with expert perspectives on how to prepare for the exams
Download or read book Coal Ash Utilization written by S. Torrey and published by William Andrew. This book was released on 1978 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete Pressure Pipe 3rd Ed M9 written by AWWA Staff and published by American Water Works Association. This book was released on 2011-01-12 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides supplemental information to assist engineers and designers in achieving optimum field performance of concrete pressure pipelines. Information and guidelines are provided covering hydraulics, surge pressure, external loads, bedding, and backfilling; designing reinforced concrete pressure pipe, fittings and appurtenances, thrust restraints, pipe on piers, and subaqueous installations; design considerations for corrosive environments; transportation of pipe; trench and tunnel installation; and other pertinent subjects.
Download or read book Awwa C304 14 r19 Design of Prestressed Concrete Cylinder Pipe written by AWWA and published by . This book was released on 2020-03 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard defines the methods to be used in the structural design of buried prestressed concrete cylinder pipe (PCCP) under internal pressure. These methods are provided for the design of pipe subjected to the effects of working, transient, and field-test load and internal pressure combinations. The design procedures of this standard are applicable to lined-cylinder pipe (LCP) having inside diameters of 16 in. through 60 in. (410 mm through 1,520 mm) and to embedded-cylinder pipe (ECP) having inside diameters of 24 in. (610 mm) and larger.