Download or read book Hazardous Chemicals in Products and Processes written by Andreas Ahrens and published by Springer Science & Business Media. This book was released on 2006 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Substitution of hazardous substances is a prioritised objective in chemical regulation and risk management. However, it is experienced as a tough task with often inconsistent results. Based on thirteen case studies, this book analyzes substitution as an innovation process and attempts to give answers to the following questions: Why and under which circumstances are companies able and willing to substitute hazardous substances? What are the main drivers and the main barriers? In which way can communication along the supply chain support environmental innovation? How can risk management appropriately deal with the lack of knowledge, with uncertainties and incomplete knowledge about the possible effects of different substances? Recommendations for action are provided for commercial and state institutions and consumers and thus for all actors engaged in the European reform of chemicals policy following the REACH system.
Download or read book Hazardous Chemicals in Products and Processes written by Andreas Ahrens and published by Springer Science & Business Media. This book was released on 2006-01-27 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Substitution of hazardous substances is a prioritised objective in chemical regulation and risk management. However, it is experienced as a tough task with often inconsistent results. Based on thirteen case studies, this book analyzes substitution as an innovation process and attempts to give answers to the following questions: Why and under which circumstances are companies able and willing to substitute hazardous substances? What are the main drivers and the main barriers? In which way can communication along the supply chain support environmental innovation? How can risk management appropriately deal with the lack of knowledge, with uncertainties and incomplete knowledge about the possible effects of different substances? Recommendations for action are provided for commercial and state institutions and consumers and thus for all actors engaged in the European reform of chemicals policy following the REACH system.
Download or read book Prudent Practices in the Laboratory written by National Research Council and published by National Academies Press. This book was released on 2011-03-25 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prudent Practices in the Laboratory-the book that has served for decades as the standard for chemical laboratory safety practice-now features updates and new topics. This revised edition has an expanded chapter on chemical management and delves into new areas, such as nanotechnology, laboratory security, and emergency planning. Developed by experts from academia and industry, with specialties in such areas as chemical sciences, pollution prevention, and laboratory safety, Prudent Practices in the Laboratory provides guidance on planning procedures for the handling, storage, and disposal of chemicals. The book offers prudent practices designed to promote safety and includes practical information on assessing hazards, managing chemicals, disposing of wastes, and more. Prudent Practices in the Laboratory will continue to serve as the leading source of chemical safety guidelines for people working with laboratory chemicals: research chemists, technicians, safety officers, educators, and students.
Download or read book Hazardous Chemicals Handbook written by P A CARSON and published by Elsevier. This book was released on 2013-10-22 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes core information for quick reference in the workplace, using tables and checklists wherever possible. Essential reading for safety officers, company managers, engineers, transport personnel, waste disposal personnel, environmental health officers, trainees on industrial training courses and engineering students. This book provides concise and clear explanation and look-up data on properties, exposure limits, flashpoints, monitoring techniques, personal protection and a host of other parameters and requirements relating to compliance with designated safe practice, control of hazards to people's health and limitation of impact on the environment. The book caters for the multitude of companies, officials and public and private employees who must comply with the regulations governing the use, storage, handling, transport and disposal of hazardous substances. Reference is made throughout to source documents and standards, and a Bibliography provides guidance to sources of wider ranging and more specialized information. Dr Phillip Carson is Safety Liaison and QA Manager at the Unilever Research Laboratory at Port Sunlight. He is a member of the Institution of Occupational Safety and Health, of the Institution of Chemical Engineers' Loss Prevention Panel and of the Chemical Industries Association's `Exposure Limits Task Force' and `Health Advisory Group'. Dr Clive Mumford is a Senior Lecturer in Chemical Engineering at the University of Aston and a consultant. He lectures on several courses of the Certificate and Diploma of the National Examining Board in Occupational Safety and Health. [Given 5 star rating] - Occupational Safety & Health, July 1994 - Loss Prevention Bulletin, April 1994 - Journal of Hazardous Materials, November 1994 - Process Safety & Environmental Prot., November 1994
Download or read book Managing Chemicals Safely written by and published by DIANE Publishing. This book was released on 1993-06 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Teaches owners and managers of small companies how to use hazardous chemicals safely.
Download or read book Substitutes for Hazardous Chemicals in the Workplace written by Gitte Goldschmidt and published by CRC Press. This book was released on 1996-02-08 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only way to completely eliminate the health effects associated with hazardous materials is to eliminate the material. How and when should dangerous chemical products be replaced with safer products? Substitutes for Hazardous Chemicals in the Workplace answers this question and others, including:
Download or read book Risk Management for Hazardous Chemicals written by Jeffrey Wayne Vincoli and published by CRC Press. This book was released on 1996-11-25 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: The key to successfully ensuring adequate protection of life, health, property, and the environment whenever and wherever hazardous chemicals are used is information. Having the right information, readily available, in easy-to-read, non-technical, language can literally save a life. It can also prevent costly and devastating environmental contamination or property loss. However, anyone who have practiced in the field of occupational or environmental safety and health has been frustrated by the lack of available information. Risk Management for Hazardous Chemicals has been compiled to provide quick and accurate reference information for those who work with chemicals. It allows them to accomplish their duties more effectively, efficiently, and with more confidence. It is intended for anyone who needs to know about methods and procedures for managing the risks associated with using hazardous chemicals, including:
Download or read book Chemical Laboratory Safety and Security written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-08-07 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of State charged the Academies with the task of producing a protocol for development of standard operating procedures (SOPs) that would serve as a complement to the Chemical Laboratory Safety and Security: A Guide to Prudent Chemical Management and be included with the other materials in the 2010 toolkit. To accomplish this task, a committee with experience and knowledge in good chemical safety and security practices in academic and industrial laboratories with awareness of international standards and regulations was formed. The hope is that this toolkit expansion product will enhance the use of the previous reference book and the accompanying toolkit, especially in developing countries where safety resources are scarce and experience of operators and end-users may be limited.
Download or read book Inherently Safer Chemical Processes written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-08-13 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inherently Safer Chemical Processes presents a holistic approach to making the development, manufacture, and use of chemicals safer. It discusses strategies for substituting more benign chemicals at the development stage, minimizing risk in the transportation of chemicals, using safer processing methods at the manufacturing stage, and decommissioning a manufacturing plant. Since the publication of the original concept book in 1996, there have been many developments on the concept of inherent safety. This new edition provides the latest knowledge so that engineers can derive maximum benefit from inherent safety.
- Author : National Research Council
- Publisher : National Academies Press
- Release : 2001-06-25
- ISBN : 030907553X
- Pages : 225 pages
Standing Operating Procedures for Developing Acute Exposure Guideline Levels for Hazardous Chemicals
Download or read book Standing Operating Procedures for Developing Acute Exposure Guideline Levels for Hazardous Chemicals written by National Research Council and published by National Academies Press. This book was released on 2001-06-25 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standing Operating Procedures for Developing Acute Exposure Guideline Levels for Hazardous Chemicals contains a detailed and comprehensive methodology for developing acute exposure guideline levels (AEGLs) for toxic substances from inhalation exposures. The book provides guidance on what documents and databases to use, toxicity endpoints that need to be evaluated, dosimetry corrections from animal to human exposures, selection of appropriate uncertainty factors to address the variability between animals and humans and within the human population, selection of modifying factors to address data deficiencies, time scaling, and quantitative cancer risk assessment. It also contains an example of a summary of a technical support document and an example of AEGL derivation. This book will be useful to persons in the derivation of levels from other exposure routesâ€"both oral and dermalâ€"as well as risk assessors in the government, academe, and private industry.
Download or read book Risk Assessment and Risk Management for the Chemical Process Industry written by Stone & Webster Engineering Corporation and published by John Wiley & Sons. This book was released on 1991-09-03 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tragic incident at Bhopal, India made it clear that safetyreviews for identification and control of accidents involving toxicchemicals must be more systematic. This guide shows how tointegrate hazard identification, risk assessment, consequenceanalysis, and risk mitigation into a formalized program forhandling hazardous chemicals. Most of the 21 contributors aresenior staff members at Stone & Webster EngineeringCorporation. They discuss how to perform and supervise safetystudies for chemical, petrochemical, petroleum refining, and otherfacilities. They discuss all aspects of detection, prevention, andmitigation of risks associated with processing, handling, andproduction of hazardous chemicals. Special attention is given tohazard identification and hazard assessment techniques ranging fromsimple screening checklists to highly structured Hazard andOperability (HAZOP) analysis. You're shown how to calculatepotential consequences of identified hazards, quantify thelikelihood of these events, and combine equipment failure rate dataand human reliability analysis with hazard assessment. You'll alsobenefit from the book's rundowns of how to * apply expert systems and artificial intelligence in riskmanagement * instill safety-oriented operating and maintenanceprocedures * train operators and emergency response personnel * conduct internal and external safety audits * perform chemical dispersion, explosion, and fire analyses * assess health effects from chemical releases * use insurance vehicles to deal with residual risk. Risk Assessment and Risk Management for the Chemical ProcessIndustry is an essential source on minimizing the dangers of toxicincidents and accidents. It is essential reading for safetyengineers, regulatory managers, environmental engineers, and otherprofessionals responsible for safety in chemical plants.
Download or read book Chemical Risk Analysis written by Bernard Martel and published by Butterworth-Heinemann. This book was released on 2000-05 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook includes the principal methodological tools and data required to comprehend, evaluate and execute analysis of chemical risk in practical working situations. A unique feature of the book, in addition to the extensive theoretical treatments of the subject, is the multitude of dangerous property tables, a remarkably extensive compilation, providing data on more than 1900 products, organic and inorganic. These tables are supplemented through the text by numerous figures and other tables, helping make this publication both comprehensive and accessible. An additional feature of this book is the description of numerous experiments conducted in the author's laboratory, designed to test the various hazard test criteria in current use. Full assessments of the results are presented and these compared with the results of other procedures in current use. This feature will provide valuable material for those engaged in research on the subject, as well as the specialist practitioner who, as the author is able to show, cannot always take the results of conventional wisdom and mandatory regulation for granted in ensuring safety. This book is intended * for safety specialists in industry who are concerned with the manipulation of chemical products * for process chemists and safety chemists who need to evaluate chemical hazards in chemical plant * for workers involved with the development of analytical procedures in industrial laboratories and in university research departments. * as an essential reference work, trainers and chemistry lecturers who wish to incorporate the subject of chemical risk in their teaching. · Numerous tables containing information on more than 1900 chemicals, organic and inorganic · Updating supplement by leading industry specialist on latest EC regulations regarding hazardous chemicals
Download or read book Chemical Hazards in Thermally Processed Foods written by Shuo Wang and published by Springer Nature. This book was released on 2019-10-11 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the types, contents, analytical methods, formation mechanisms and control strategies for hazardous substances produced during the thermal processing of foods. In each chapter, hazardous substances such as dicarbonyl compounds, acrylamide, furan, heterocyclic amines, trans-fatty acids, and advanced glycation end products (AGEs) are covered and discussed in terms of analytical methods, formation mechanisms and mitigation strategies. The content chiefly focuses on how these hazardous substances are formed during thermal processing and what can be done to mitigate or eliminate them in food products (e.g. those prepared at higher temperatures by baking, frying or roasting). The major objective of this book is to provide a timely and informative guide for researchers and graduate students in the fields of food chemistry, food ingredients, food analysis, food safety, food processing, chemical toxicology, disease prevention and health promotion.
Download or read book Niosh Pocket Guide to Chemical Hazards written by Niosh and published by www.Militarybookshop.CompanyUK. This book was released on 2012-06-01 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NIOSH Pocket Guide to Chemical Hazards presents information taken from the NIOSH/OSHA Occupational Health Guidelines for Chemical Hazards, from National Institute for Occupational Safety and Health (NIOSH) criteria documents and Current Intelligence Bulletins, and from recognized references in the fields of industrial hygiene, occupational medicine, toxicology, and analytical chemistry. The information is presented in tabular form to provide a quick, convenient source of information on general industrial hygiene practices. The information in the Pocket Guide includes chemical structures or formulas, identification codes, synonyms, exposure limits, chemical and physical properties, incompatibilities and reactivities, measurement methods, respirator selections, signs and symptoms of exposure, and procedures for emergency treatment.
Download or read book Occupational Health and Workplace Monitoring at Chemical Agent Disposal Facilities written by National Research Council and published by National Academies Press. This book was released on 2001-02-01 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: In keeping with a congressional mandate (Public Law 104-484) and the Chemical Weapons Convention, the United States is currently destroying its chemical weapons stockpile. The Army must ensure that the chemical demilitarization workforce is protected from the risks of exposure to hazardous chemicals during disposal operations and during and after facility closure. Good industrial practices developed in the chemical and nuclear energy industries and other operations that involve the processing of hazardous materials include workplace monitoring of hazardous species and a systematic occupational health program for monitoring workers' activities and health. In this report, the National Research Council Committee on Review and Evaluation of the Army Chemical Stockpile Disposal Program examines the methods and systems used at JACADS and TOCDF, the two operational facilities, to monitor the concentrations of airborne and condensed-phase chemical agents, agent breakdown products, and other substances of concern. The committee also reviews the occupational health programs at these sites, including their industrial hygiene and occupational medicine components. Finally, it evaluates the nature, quality, and utility of records of workplace chemical monitoring and occupational health programs.
Download or read book Destruction of Hazardous Chemicals in the Laboratory written by George Lunn and published by John Wiley & Sons. This book was released on 2012-05-01 with total page 795 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes practical procedures for the destruction of hazardous chemicals and biological agents in the laboratory in which they are used. The book is a continuation and expansion of “Destruction of Hazardous Chemicals in the Laboratory.” It follows the same general approach as the first and second editions but includes a number of new chapters including one on using advanced oxidation techniques as a general means of degrading chemicals. All the monographs from the second edition are incorporated in this volume and are revised and extended as necessary. A number of new monographs describing procedures for the destruction of hazardous chemicals have also been added. The destruction of many pharmaceuticals is also described in this book. This subject has become of increasing importance with recent reports of the detection of pharmaceuticals in the water supply. Finally a new addition is the chapter “General Methods for the Destruction of Hazardous Chemicals in the Laboratory.” This chapter describes recent advanced oxidation methods that should be generally applicable to all organic compounds. The methods use commonly available laboratory equipment and reagents.
Download or read book Sittig s Handbook of Toxic and Hazardous Chemicals and Carcinogens written by Richard P. Pohanish and published by William Andrew. This book was released on 2008-01-10 with total page 2888 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than a quarter century, Sittig's Handbook of Toxic and Hazardous Chemicals and Carcinogens has proven to be among the most reliable, easy-to-use and essential reference works on hazardous materials. Sittig's 5th Edition remains the lone comprehensive work providing a vast array of critical information on the 2,100 most heavily used, transported, and regulated chemical substances of both occupational and environmental concern.Information is the most vital resource anyone can have when dealing with potential hazardous substance accidents or acts of terror. Sittig's provides extensive data for each of the 2,100 chemicals in a uniform format, enabling fast and accurate decisions in any situation. The chemicals are presented alphabetically and classified as a carcinogen, hazardous substance, hazardous waste, or toxic pollutant. This new edition contains extensively expanded information in all 28 fields for each chemical (see table of contents) and has been updated to keep pace with world events. Chemicals classified as WMD have been included in the new edition as has more information frequently queried by first responders and frontline industrial safety personnel. *Includes and references European chemical identifiers and regulations.*The only single source reference that provides such in-depth information for each chemical.*The two volume set is designed for fast and accurate decision making in any situation.