Download or read book Advances in Construction and Demolition Waste Recycling written by F. Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2020-02-10 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Construction and Demolition Waste Recycling: Management, Processing and Environmental Assessment is divided over three parts. Part One focuses on the management of construction and demolition waste, including estimation of quantities and the use of BIM and GIS tools. Part Two reviews the processing of recycled aggregates, along with the performance of concrete mixtures using different types of recycled aggregates. Part Three looks at the environmental assessment of non-hazardous waste. This book will be a standard reference for civil engineers, structural engineers, architects and academic researchers working in the field of construction and demolition waste. - Summarizes key recent research in recycling and reusing concrete and demolition waste to reduce environmental impacts - Considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, and the types and optimal location of waste recycling plants - Reviews key steps in handling construction and demolition waste

Download or read book Handling and Recycling Building and Construction Waste written by Catarina Thormark and published by Nordic Council of Ministers. This book was released on 2002 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Construction Demolition and Disaster Waste Management written by Erik K. Lauritzen and published by CRC Press. This book was released on 2018-09-03 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction and Demolition Waste (CDW), from the construction, maintenance, renovation and demolition of buildings and structures, represents a large proportion of the waste in industrialized societies. Compared to other forms, such as household waste, more than 90% of CDW can be used as a resource and a substitute for construction materials, especially for primary, natural raw materials. Reuse, recovery and recycling depends on the quality and market for the materials, and the environmental impact of the processes for conversion of CDW from old structures to its use in new structures. However, the utilization today of CDW products as secondary resources is marginal. Most CDW is deposited or used as fill material, and the opportunities of high quality recycling are generally neglected. This book presents the opportunities for the sustainable and resource efficient utilisation of CDW, focusing on recycling of concrete and masonry as the major forms of CDW. The recycling of gypsum, timber, mineral wool, asphalt and other types are also described. Its aim is to present a chain of value and material streams in the transformation of obsolete buildings and structures into new buildings and structures. It takes a holistic view, focusing on the lifecycle economy (the circular economy) and integrated management aspects of various scenarios ranging from high industrial urban renewal to debris removal and management after disasters and conflicts. It is based on the author ́s 35 years of research and development combined with practical international experience within the demolition and recycling area. It addresses students, architects, civil engineers, building owners, public authorities and others working in urban planning, demolition and resource management in the building and construction sector and in the reconstruction of damaged buildings after disasters and wars.

Download or read book Handbook of Recycled Concrete and Demolition Waste written by F. Pacheco-Torgal and published by Elsevier. This book was released on 2013-09-30 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: The civil engineering sector accounts for a significant percentage of global material and energy consumption and is a major contributor of waste material. The ability to recycle and reuse concrete and demolition waste is critical to reducing environmental impacts in meeting national, regional and global environmental targets. Handbook of recycled concrete and demolition waste summarises key recent research in achieving these goals.Part one considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, the types and optimal location of waste recycling plants and the economics of managing construction and demolition waste. Part two reviews key steps in handling construction and demolition waste. It begins with a comparison between conventional demolition and construction techniques before going on to discuss the preparation, refinement and quality control of concrete aggregates produced from waste. It concludes by assessing the mechanical properties, strength and durability of concrete made using recycled aggregates. Part three includes examples of the use of recycled aggregates in applications such as roads, pavements, high-performance concrete and alkali-activated or geopolymer cements. Finally, the book discusses environmental and safety issues such as the removal of gypsum, asbestos and alkali-silica reaction (ASR) concrete, as well as life-cycle analysis of concrete with recycled aggregates.Handbook of recycled concrete and demolition waste is a standard reference for all those involved in the civil engineering sector, as well as academic researchers in the field. - Summarises key recent research in recycling and reusing concrete and demolition waste to reduce environmental impacts and meet national, regional and global environmental targets - Considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, the types and optimal location of waste recycling plants - Reviews key steps in handling construction and demolition waste

Download or read book Building from Waste written by Dirk E. Hebel and published by Birkhäuser. This book was released on 2014-09-25 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: ”Reduce, Reuse, Recycle, and Recover“ is the sustainable guideline that has replaced the ”Take, Make, Waste“ attitude of the industrial age. Based on their background at the ETH Zurich and the Future Cities Laboratory in Singapore, the authors provide both a conceptual and practical look into materials and products which use waste as a renewable resource. This book introduces an inventory of current projects and building elements, ranging from marketed products, among them façade panels made of straw and self-healing concrete, to advanced research and development like newspaper, wood or jeans denim used as isolating fibres. Going beyond the mere recycling aspect of reused materials, it looks into innovative concepts of how materials usually regarded as waste can be processed into new construction elements. The products are organized along the manufacturing processes: densified, reconfigured, transformed, designed and cultivated materials. A product directory presents all materials and projects in this book according to their functional uses in construction: load-bearing, self-supporting, insulating, waterproofing and finishing products.

Download or read book Designing Sustainable Technologies Products and Policies written by Enrico Benetto and published by Springer. This book was released on 2018-07-03 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book provides insight into the implementation of Life Cycle approaches along the entire business value chain, supporting environmental, social and economic sustainability related to the development of industrial technologies, products, services and policies; and the development and management of smart agricultural systems, smart mobility systems, urban infrastructures and energy for the built environment. The book is based on papers presented at the 8th International Life Cycle Management Conference that took place from September 3-6, 2017 in Luxembourg, and which was organized by the Luxembourg Institute of Science and Technology (LIST) and the University of Luxembourg in the framework of the LCM Conference Series.

Download or read book Solid Waste Landfilling written by Raffaello Cossu and published by Elsevier. This book was released on 2018-11-29 with total page 1192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid Waste Landfilling: Concepts, Processes, Technology provides information on technologies that promote stabilization and minimize environmental impacts in landfills. As the main challenges in waste management are the reduction and proper treatment of waste and the appropriate use of waste streams, the book satisfies the needs of a modern landfill, covering waste pre-treatment, in situ treatment, long-term behavior, closure, aftercare, environmental impact and sustainability. It is written for practitioners who need specific information on landfill construction and operation, but is also ideal for those concerned about the possible return of these sites to landscapes and their subsequent uses for future generations. - Includes input by international contributors from a vast number of disciplines - Provides worldwide approaches and technologies - Showcases the interdisciplinary nature of the topic - Focuses on sustainability, covering the lifecycle of landfills under the concept of minimizing environmental impact - Presents knowledge of the legal framework and economic aspects of landfilling

Download or read book Waste written by Trevor Letcher and published by Academic Press. This book was released on 2011-01-20 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste: A Handbook for Management gives the broadest, most complete coverage of waste in our society. The book examines a wide range of waste streams, including: - Household waste (compostable material, paper, glass, textiles, household chemicals, plastic, water, and e-waste) - Industrial waste (metals, building materials, tires, medical, batteries, hazardous mining, and nuclear) - Societal waste (ocean, military, and space) - The future of landfills and incinerators Covering all the issues related to waste in one volume helps lead to comparisons, synergistic solutions, and a more informed society. In addition, the book offers the best ways of managing waste problems through recycling, incineration, landfill and other processes. - Co-author Daniel Vallero interviewed on NBC's Today show for a segment on recycling - Scientific and non-biased overviews will assist scientists, technicians, engineers, and government leaders - Covers all main types of waste, including household, industrial, and societal - Strong focus on management and recycling provides solutions

Download or read book Circular Economy in the Construction Industry written by Sadhan Kumar Ghosh and published by CRC Press. This book was released on 2021-12-22 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circular Economy in the Construction Industry is an invaluable resource for researchers, policymakers, implementers and PhD and Masters-level students in universities analyzing the present status of Construction and Demolition Wastes (C&DW) management, materials development utilizing slag, fly ash, HDPE fibre, geo-wastes, and other wastes, green concrete, soil stabilization, resource circulation in construction sectors, success in experimentation & commercial production, future needs, and future research areas. While huge C&DW is wasted by dumping, there is potential of recycling preventing greenhouse gas (GHG) emissions and environmental pollution as well as creating business opportunities. Circularity of resources in the construction industry can contribute to a more secure, sustainable, and economically sound future through proper policy instruments, management systems, and recycling by selecting the following: Supply chain sustainability and collection of C&D Wastes, Appropriate separation and recycling technology, Enforcement of policy instruments, Productivity, quality control of recycled products and intended end use, Economic feasibility as business case, commercialization, generating employment. This book addresses most of the above issues in a lucid manner by experts in the field from different countries, which are helpful for the related stakeholders, edited by experts in the field.

Download or read book Sustainable Construction written by Charles J. Kibert and published by University of Florida, Center for Construction & Environment. This book was released on 1994 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Waste To Profit W t P written by Linda Zikhona Linganiso and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of a circular economy in the construction sector captures global material flow through product design, inverse logistics, innovation and collaborations. The circulation of the economy takes into consideration global population influence, which affects the economy through a variety of construction product flows in particular. The increase in consumers means increasing product and services which participate in different waste streams. The emerging sustainable development in the construction industry requires the recycling of waste materials to reduce the negative environmental impact of construction activities. Accumulation and management of construction wastes is also becoming a major environmental and economical concern in many developing countries. Huge volumes of waste generated end up piled on landfill sites or illegally dumped, posing serious health and ecological problems. In the construction industry, recycling of waste concrete, masonry, cement, gypsum, to mention but a few, has become an important aspect due to the continued increase of construction wastes and depletion of natural aggregates. Why not establish a business system that is specifically designed to do much more value addition to the construction wastes and develop products which are not only in demand locally but internationally, to encourage exports for maximum financial gain. This book aims to analyze the current business model in the construction sector and the current legislation concerning waste management. It also highlights efforts required in order to refine the recycling methods in favor of a circular economy in the constuction industry. In support of a transition to a low carbon economy, different types of materials which can be produced from the construction wastes are indicated including processes which are used to obtain the final products. The market demand including penetration of the resulting products are given extensively. Policies and regulations to govern these undertakings are highlighted also. The municipalities will learn to redirect the local construction industries on how to avoid dumping at landfill sites as the space has currently become an issue. Researchers globally will learn how to go up through the Technology Readiness Levels (TRL) from basic research through prototype development and finally up to commercialization in projects related to the construction.

Download or read book Handbook of Environment and Waste Management written by Yung-Tse Hung and published by World Scientific. This book was released on 2012 with total page 1256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a compilation of topics that are at the forefront of many technical advances and practices in air and water control. These include air pollution control, water pollution control, water treatment, wastewater treatment, industrial waste treatment and small scale wastewater treatment.

Download or read book How Buildings Learn written by Stewart Brand and published by Penguin. This book was released on 1995-10-01 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: A captivating exploration of the ever-evolving world of architecture and the untold stories buildings tell. When a building is finished being built, that isn’t the end of its story. More than any other human artifacts, buildings improve with time—if they’re allowed to. Buildings adapt by being constantly refined and reshaped by their occupants, and in that way, architects can become artists of time rather than simply artists of space. From the connected farmhouses of New England to I.M. Pei’s Media Lab, from the evolution of bungalows to the invention of Santa Fe Style, from Low Road military surplus buildings to a High Road English classic like Chatsworth—this is a far-ranging survey of unexplored essential territory. Discover how structures become living organisms, shaped by the people who inhabit them, and learn how architects can harness the power of time to create enduring works of art through the interconnected worlds of design, function, and human ingenuity.

Download or read book Sustainable Industrial Design and Waste Management written by Salah El Haggar and published by Academic Press. This book was released on 2010-07-28 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Industrial Design and Waste Management was inspired by the need to have a text that enveloped awareness and solutions to the ongoing issues and concerns of waste generated from industry. The development of science and technology has increased human capacity to extract resources from nature and it is only recently that industries are being held accountable for the detrimental effects the waste they produce has on the environment. Increased governmental research, regulation and corporate accountability are digging up issues pertaining to pollution control and waste treatment and environmental protection. The traditional approach for clinical waste, agricultural waste, industrial waste, and municipal waste are depleting our natural resources. The main objective of this book is to conserve the natural resources by approaching 100 % full utilization of all types of wastes by cradle – to - cradle concepts, using Industrial Ecology methodology documented with case studies. Sustainable development and environmental protection cannot be achieved without establishing the concept of industrial ecology. The main tools necessary for establishing Industrial Ecology and sustainable development will be covered in the book. The concept of "industrial ecology will help the industrial system to be managed and operated more or less like a natural ecosystem hence causing as less damage as possible to the surrounding environment. - Numerous case studies allow the reader to adapt concepts according to personal interest/field - Reveals innovative technologies for the conservation of natural resources - The only book which provides an integrated approach for sustainable development including tools, methodology, and indicators for sustainable development

Download or read book Recycling Construction Demolition Waste A LEED Based Toolkit GreenSource written by Greg Winkler and published by McGraw Hill Professional. This book was released on 2010-08-02 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Reference on Construction Waste Recycling This GreenSource guide offers comprehensive information on how to recycle as much as 95 percent of new construction and demolition waste, reuse existing materials, and comply with U.S. Green Building Council (USGBC) LEED waste management guidelines. Recycling Construction & Demolition Waste provides the strategies and tools you need to develop and implement a successful jobsite waste management plan. This practical resource also covers other programs that promote sustainable construction, such as the International Code Council's ICC-ES program, the National Association of Homebuilders (NAHB) Green Building Program, the Green Building Initiative Green Globes Program, BREEAM, and more. FIND OUT HOW TO: Manage construction and demolition waste on the jobsite Set up an efficient jobsite recycling center Recycle new construction waste Conduct an on-site audit to assess demolition waste Reuse existing materials, including asphalt, brick, concrete, insulation, structural steel, wood, glass, and more Develop a comprehensive waste management plan Comply with LEED standards to earn waste management credits Get details on other green certification and code programs Document waste management compliance Include appropriate specifications in construction documents Market your jobsite recycling program

Download or read book Construction and Demolition Waste Management in Australia written by Salman Shooshtarian and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Due to the increase in construction activities worldwide and in Australia, the generation rate of construction and demolition (C&D) waste has significantly grown in recent years. In Australia, construction projects (i.e. housing, buildings and transport infrastructure) are being delivered at an unprecedented rate. Between 2009 and 2019, the annual average growth rate in this industry was 3.33%. The industry is identified as the fourth largest contributor to Australia's growth domestic product (GDP). Unsurprisingly, this quantity of construction brings about a considerable quantity of waste. In 2019, the construction industry generated 27 million tons (or megatonnes) of waste from construction and demolition activities in Australia. Given the size of the construction market and waste generated in this industry, any change will create huge impacts. The adequate management of such a quantity has now become a priority for policymakers around the world. A holistic national approach is required to handle the growing issue of C&D waste management in Australia. Therefore, this book identifies discrepancies and inconsistencies related to C&D waste management in different Australian jurisdictions. The included chapters discuss regulations governing the C&D waste stream, discrepancies in defining waste, Australia's place in the worldwide C&D waste market, opportunities for reducing C&D waste, and the perception among C&D waste stakeholders on relevant issues and proposed reforms, among other topics. Overall, the book contributes to the Australian understanding of effective management of C&D waste by providing a clear picture of C&D waste state of play. The book can benefit policymakers and whoever is interested in C&D waste to better plan for innovative and efficient C&D waste resulting in the further diversion of C&D waste from landfills"--

Download or read book Management Recycling and Reuse of Waste Composites written by Vannessa Goodship and published by Elsevier. This book was released on 2009-12-18 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative reference work provides a comprehensive review of the management, recycling and reuse of waste composites. These are issues which are of increasing importance due to the growing use of composites in many industries, increasingly strict legislation and concerns about disposal of composites by landfill or incineration.Part one discusses the management of waste composites and includes an introduction to composites recycling and a chapter on EU legislation for recycling waste composites. Part two reviews thermal technologies for recycling waste composites with chapters on pyrolysis, catalytic transformation, thermal treatments for energy recovery and fluidized bed pyrolysis. Part three covers mechanical methods of recycling waste composites. This section includes chapters on additives for recycled plastic composites, improving mechanical recycling and the quality and durability of mechanically recycled composites. Parts four discusses improving sustainable manufacture of composites, with chapters on environmentally-friendly filament winding of FRP composites, process monitoring and new developments in producing more functional and sustainable composites. Part five gives a review of case studies including end-of-life wind turbine blades, aerospace composites, marine composites, composites in construction and the recycling of concrete.With its distinguished editor and international team of contributors, Management, recycling and reuse of waste composites is a standard reference for anyone involved in the disposal or recycling of waste composites. - Reviews the increasingly important issues of recycling and reuse as a result of the increased use of composites - Discusses the management of waste composites and EU legislation with regards to recycling - Examines methods for recycling, including thermal technologies and mechanical methods