Download or read book Handbook of Valves and Actuators written by Brian Nesbitt and published by Elsevier. This book was released on 2011-04-19 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industries that use pumps, seals and pipes will also use valves and actuators in their systems. This key reference provides anyone who designs, uses, specifies or maintains valves and valve systems with all of the critical design, specification, performance and operational information they need for the job in hand. Brian Nesbitt is a well-known consultant with a considerable publishing record. A lifetime of experience backs up the huge amount of practical detail in this volume. * Valves and actuators are widely used across industry and this dedicated reference provides all the information plant designers, specifiers or those involved with maintenance require* Practical approach backed up with technical detail and engineering know-how makes this the ideal single volume reference* Compares and contracts valve and actuator types to ensure the right equipment is chosen for the right application and properly maintained
Download or read book Handbook of Valves and Actuators written by Archana Sikarwar and published by . This book was released on 2015-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Valves are the components in a fluid flow or pressure system that regulate either the flow or the pressure of the fluid. They are used extensively in the process industries, especially petrochemical. Valves and actuators are widely used across industry and this dedicated reference provides all the information plant designers, specifiers or those involved with maintenance required. Industries that use pumps, seals and pipes will also use valves and actuators in their systems. This key provides anyone who designs, uses, specifies or maintains valves and valve systems with all of the critical design, specification, performance and operational information. In the presentations in their chapters, authors have written bases on their own experience as well as those of their associates. Most chapters overlap several others. If differences of opinion or technique become apparent, seeming contradictions, it is because each author has had success with his or her particular technique, not that others are wrong. It should be recognised that each author's experience may not be directed to a particular industry, perhaps omitting ideas important to other industries. An effort has been made to cross-reference chapters so that the reader may be aware of other points of view.
Download or read book Valve Handbook 3rd Edition written by Philip L. Skousen and published by McGraw Hill Professional. This book was released on 2011-04-22 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, up-to-date coverage of valves for the process industry Revised to include details on the latest technologies, Valve Handbook, Third Edition, discusses design, performance, selection, operation, and application. This updated resource features a new chapter on the green technology currently employed by the valve industry, as well as an overview of the major environmental global standards that process plants are expected to meet. The book also contains new information on: Valves used in the wastewater industry Applying emergency shutdown (ESO) valves Recent changes to shutoff classifications Valves specified for the nuclear industry The procurement process for the Nuclear Stamp (N-Stamp) The emergence of wireless technology and its application to current smart technology Characteristics of high-performance hydraulic fluid Valve Handbook, Third Edition, covers: Valve selection criteria Manual valves Check valves Pressure relief valves Control valves Manual operators and actuators Smart valves and positioners Valve and actuator sizing Green valve technology and application Common valve problems Valve purchasing issues
Download or read book Valve Handbook written by Philip Skousen and published by McGraw Hill Professional. This book was released on 2004-06-22 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The valve industry has become increasingly digitized over the past five years. This revised second edition reflects those developments by focusing on the latest processing plant applications for "smart valve" technology. * Updated information on testing agencies and the latest code changes Contents: Introduction to Valves * Valve Selection Criteria * Manual Valves * Control Valves * Manual Operators and Actuators * New Smart Valve Technology * Smart Valve and Positioners * Valve Sizing * Actuator Sizing * Common Valve Problems * Abbreviations of Related Organizations and Standards
Download or read book Valve Selection Handbook written by Peter Smith and published by Elsevier. This book was released on 2004-01-24 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Valves are the components in a fluid flow or pressure system that regulate either the flow or the pressure of the fluid. They are used extensively in the process industries, especially petrochemical. Though there are only four basic types of valves, there is an enormous number of different kinds of valves within each category, each one used for a specific purpose. No other book on the market analyzes the use, construction, and selection of valves in such a comprehensive manner. Covers new environmentally-conscious equipment and practices, the most important hot-button issue in the petrochemical industry today Details new generations of valves for offshore projects, the oil industry's fastest-growing segment Includes numerous new products that have never before been written about in the mainstream literature
Download or read book Pneumatic Handbook written by A. Barber and published by Elsevier. This book was released on 1997-12-19 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accepted as the standard reference work on modern pneumatic and compressed air engineering, the new edition of this handbook has been completely revised, extended and updated to provide essential up-to-date reference material for engineers, designers, consultants and users of fluid systems.
Download or read book Fluid Power Design Handbook written by Frank Yeaple and published by CRC Press. This book was released on 1995-10-24 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintaining and enhancing the high standards and excellent features that made the previous editions so popular, this book presents engineering and application information to incorporate, control, predict, and measure the performance of all fluid power components in hydraulic or pneumatic systems. Detailing developments in the ongoing "electronic re
Download or read book The Valve Primer written by Brent T. Stojkov and published by Industrial Press Inc.. This book was released on 1997 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for engineers, operators, and maintenance technicians in the power generation, oil, chemical, paper and other processing industries, The Valve Primer provides a basic knowledge of valve types and designs, materials used to make valves, where various designs should and should not be used, factors to consider in specifying a valve for a specific application, how to calculate flow through valves, and valve maintenance and repair. If you are involved in valve selection, specification, procurement, inspection, troubleshooting or repair, you will find a wealth of information in The Valve Primer. Presents information on a wide variety of valves and explains the operational basics of the thousands of valves that are found in power stations, refineries, plants and mills throughout the world. Includes over fifty illustrations depicting various valve types and how they operate. Contains valuable information the cannot be found in any other single source. Introduction Gate Valves Globe Valves Check Valves Butterfly Valves Ball Valves Plug Valves Diaphragm Valves Materials Sizes, Classes, and Ratings Fluid Flow Through Valves Valve Operators and Actuators Control Valves and Pressure Relief Valves Selection Maintenance and Repair Miscellaneous Topics Standards Glossary
Download or read book Valve Selection Handbook written by R. W. Zappe and published by Gulf Professional Publishing. This book was released on 1999 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This definitive guide to valve selection is the result of the author's lifelong study of the design and application of valves. It covers the fundamentals of sealing mechanisms, as well as the sealability of fluids and flow through valves. You will find a complete analysis of valve designs for various industrial flow applications. This fourth edition is thoroughly updated, with revised and expanded chapters on pressure relief valves and rupture discs. This book takes into account U.S. practices and codes as well as emerging European standards. The book is an excellent reference text for practicing engineers and students. It is also of interest to valve manufacturers and authorities who evaluate and establish standards.
Download or read book Subsea Valves and Actuators for the Oil and Gas Industry written by Karan Sotoodeh and published by Gulf Professional Publishing. This book was released on 2021-05-29 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piping and valve engineers rely on common industrial standards for selecting and maintaining valves, but these standards are not specific to the subsea oil and gas industry. Subsea Valves and Actuators for the Oil and Gas Industry delivers a needed reference to go beyond the standard to specify how to select, test, and maintain the right subsea oil and gas valve for the project. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection, helping guide the engineer to the most efficient valve. Covering subsea-specific protection, the reference also gives information on high pressure protection systems (HIPPS) and discusses corrosion management within the subsea sector, such as Hydrogen Induced Stress Cracking Corrosion (HISC). Additional benefits include understanding the concept of different safety valves in subsea, selecting different valves and actuators located on subsea structures such as Christmas trees, manifolds, and HIPPS modules, with a full detail review including sensors, logic solver, and solenoid which is designed to save cost and improve the reliability in the subsea system. Rounding out with chapters on factory acceptance testing (FAT) and High Integrity Pressure Protection Systems (HIPPS), Subsea Valves and Actuators for the Oil and Gas Industry gives subsea engineers and managers a much-needed tool to better understand today’s subsea technology. Understand practical information about all types of subsea valves and actuators with over 600 visuals and several case studies Learn and review the applicable standards and specifications from API and ISO in one convenient location Protect your assets with a high-pressure protection system (HIPPS) and subsea-specific corrosion management including Hydrogen Induced Stress Cracking Corrosion (HISC)
Download or read book The Hydraulic Handbook written by Trevor M. Hunt and published by Elsevier. This book was released on 1996 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. The first point of reference for design engineers, hydraulic technicians, chief engineers, plant engineers, and anyone concerned with the selection, installation, operation or maintenance of hydraulics equipment. The hydraulic industry has seen many changes over recent years and numerous new techniques, components and methods have been introduced. The ninth edition of the Hydraulic Handbook incorporates all these developments to provide a crucial reference manual for practical and technical guidance.
Download or read book Valves Piping and Pipelines Handbook written by T. Christopher Dickenson and published by Elsevier. This book was released on 1999 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. Over recent years, a number of significant developments in the application of valves have taken place: the increasing use of actuator devices, the introduction of more valve designs capable of reliable operation in difficult fluid handling situations; low noise technology and most importantly, the increasing attention being paid to product safety and reliability. Digital technology is making an impact on this market with manufacturers developing intelligent (smart) control valves incorporating control functions and interfaces. New metallic materials and coatings available make it possible to improve application ranges and reliability. New and improved polymers, plastic composite materials and ceramics are all playing their part. Fibre-reinforced plastic pipe systems, glass-reinforced epoxy pipe systems and the traditional low-cost polyester pipe systems have all undergone sophisticated design and manufacturing technology changes. The pote
Download or read book A Practical Guide to Piping and Valves for the Oil and Gas Industry written by Karan Sotoodeh and published by Gulf Professional Publishing. This book was released on 2021-01-12 with total page 986 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide to Piping and Valves for the Oil and Gas Industry covers how to select, test and maintain the right oil and gas valve. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection. Covering both onshore and offshore projects, the book also gives an introduction to the most common types of corrosion in the oil and gas industry, including CO2, H2S, pitting, crevice, and more. A model to evaluate CO2 corrosion rate on carbon steel piping is introduced, along with discussions on bulk piping components, including fittings, gaskets, piping and flanges. Rounding out with chapters devoted to valve preservation to protect against harmful environments and factory acceptance testing, this book gives engineers and managers a much-needed tool to better understand today’s valve technology. Presents oil and gas examples and challenges relating to valves, including many illustrations from valves in different stages of projects Helps readers understand valve materials, testing, actuation, packing and preservation, also including a new model to evaluate CO2 corrosion rates on carbon steel piping Presents structured valve selection tables in each chapter to help readers pick the right valve for the right project
Download or read book The Safety Relief Valve Handbook written by Marc Hellemans and published by Elsevier. This book was released on 2009-08-31 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Safety Valve Handbook is a professional reference for design, process, instrumentation, plant and maintenance engineers who work with fluid flow and transportation systems in the process industries, which covers the chemical, oil and gas, water, paper and pulp, food and bio products and energy sectors. It meets the need of engineers who have responsibilities for specifying, installing, inspecting or maintaining safety valves and flow control systems. It will also be an important reference for process safety and loss prevention engineers, environmental engineers, and plant and process designers who need to understand the operation of safety valves in a wider equipment or plant design context. No other publication is dedicated to safety valves or to the extensive codes and standards that govern their installation and use. A single source means users save time in searching for specific information about safety valves The Safety Valve Handbook contains all of the vital technical and standards information relating to safety valves used in the process industry for positive pressure applications. Explains technical issues of safety valve operation in detail, including identification of benefits and pitfalls of current valve technologies Enables informed and creative decision making in the selection and use of safety valves The Handbook is unique in addressing both US and European codes: - covers all devices subject to the ASME VIII and European PED (pressure equipment directive) codes; - covers the safety valve recommendations of the API (American Petroleum Institute); - covers the safety valve recommendations of the European Normalisation Committees; - covers the latest NACE and ATEX codes; - enables readers to interpret and understand codes in practice Extensive and detailed illustrations and graphics provide clear guidance and explanation of technical material, in order to help users of a wide range of experience and background (as those in this field tend to have) to understand these devices and their applications Covers calculating valves for two-phase flow according to the new Omega 9 method and highlights the safety difference between this and the traditional method Covers selection and new testing method for cryogenic applications (LNG) for which there are currently no codes available and which is a booming industry worldwide Provides full explanation of the principles of different valve types available on the market, providing a selection guide for safety of the process and economic cost Extensive glossary and terminology to aid readers’ ability to understand documentation, literature, maintenance and operating manuals Accompanying website provides an online valve selection and codes guide.
Download or read book Standard Handbook for Mechanical Engineers written by and published by . This book was released on 1923 with total page 1876 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mems Nems written by Cornelius T. Leondes and published by Springer Science & Business Media. This book was released on 2007-10-08 with total page 2142 pages. Available in PDF, EPUB and Kindle. Book excerpt: This significant and uniquely comprehensive five-volume reference is a valuable source for research workers, practitioners, computer scientists, students, and technologists. It covers all of the major topics within the subject and offers a comprehensive treatment of MEMS design, fabrication techniques, and manufacturing methods. It also includes current medical applications of MEMS technology and provides applications of MEMS to opto-electronic devices. It is clearly written, self-contained, and accessible, with helpful standard features including an introduction, summary, extensive figures and design examples with comprehensive reference lists.
Download or read book ISA Handbook of Control Valves written by James W. Hutchison and published by . This book was released on 1976 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:
