Download or read book Handbook of sol gel science and technology 2 Characterization and properties of sol gel materials and products written by Sumio Sakka and published by Springer Science & Business Media. This book was released on 2004 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of sol gel science and technology 1 Sol gel processing written by Sumio Sakka and published by Springer Science & Business Media. This book was released on 2005 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since Dr. Disiich of Germany prepared a glass lens by the sol-gel method around 1970, sol-gel science and technology has continued to develop. Since then this field has seen remarkable technical developments as well as a broadening of the applications of sol-gel science and technology. There is a growing need for a comprehensive reference that treats both the fundamentals and the applications, and this is the aim of "Handbook of Sol-Gel Science and Technology."The primary purpose of sol-gel science and technology is to produce materials, active and non-active including optical, electronic, chemical, sensor, bio- and structural materials. This means that sol-gel science and technology is related to all kinds of manufacturing industries. Thus Volume 1, "Sol-Gel Processing," is devoted to general aspects of processing. Newly developed materials such as organic-inorganic hybrids, photonic crystals, ferroelectric coatings, photocatalysts will be covered. Topics in this volume include: Volume 2, "Characterization of Sol-Gel Materials and Products, "highlights the important fact that useful materials are only produced when characterization is tied to processing. Furthermore, characterization is essential to the understanding of nanostructured materials, and sol-gel technology is a most important technology in this new field. Since nanomaterials display their functional property based on their nano- and micro-structure, "characterization" is very important. Topics found in Volume 2 include: Sol-gel technology is a versatile technology, making it possible to produce a wide variety of materials and to provide existing substances with novel properties. This technology was applied to producingnovel materials, for example organic-inorganic hybrids, which are quite difficult to make by other fabricating techniques, and it was also applied to producing materials based on high temperature superconducting oxides. "Applications of Sol-Gel Technology," (Volume 3), will cover applications such as:
Download or read book Handbook of sol gel science and technology 3 Applications of sol gel technology written by Sumio Sakka and published by Springer Science & Business Media. This book was released on 2005 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since Dr. Disiich of Germany prepared a glass lens by the sol-gel method around 1970, sol-gel science and technology has continued to develop. Since then this field has seen remarkable technical developments as well as a broadening of the applications of sol-gel science and technology. There is a growing need for a comprehensive reference that treats both the fundamentals and the applications, and this is the aim of "Handbook of Sol-Gel Science and Technology."The primary purpose of sol-gel science and technology is to produce materials, active and non-active including optical, electronic, chemical, sensor, bio- and structural materials. This means that sol-gel science and technology is related to all kinds of manufacturing industries. Thus Volume 1, "Sol-Gel Processing," is devoted to general aspects of processing. Newly developed materials such as organic-inorganic hybrids, photonic crystals, ferroelectric coatings, photocatalysts will be covered. Topics in this volume include: Volume 2, "Characterization of Sol-Gel Materials and Products, "highlights the important fact that useful materials are only produced when characterization is tied to processing. Furthermore, characterization is essential to the understanding of nanostructured materials, and sol-gel technology is a most important technology in this new field. Since nanomaterials display their functional property based on their nano- and micro-structure, "characterization" is very important. Topics found in Volume 2 include: Sol-gel technology is a versatile technology, making it possible to produce a wide variety of materials and to provide existing substances with novel properties. This technology was applied to producingnovel materials, for example organic-inorganic hybrids, which are quite difficult to make by other fabricating techniques, and it was also applied to producing materials based on high temperature superconducting oxides. "Applications of Sol-Gel Technology," (Volume 3), will cover applications such as:
Download or read book Handbook of Sol Gel Science and Technology written by Lisa Klein and published by Springer Nature. This book was released on 2018-05-31 with total page 3755 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely updated and expanded second edition stands as a comprehensive knowledgebase on both the fundamentals and applications of this important materials processing method. The diverse, international team of contributing authors of this reference clarify in extensive detail properties and applications of sol-gel science and technology as it pertains to the production of substances, active and non-active, including optical, electronic, chemical, sensor, bio- and structural materials. Essential to a wide range of manufacturing industries, the compilation divides into the three complementary sections: Sol-Gel Processing, devoted to general aspects of processing and recently developed materials such as organic-inorganic hybrids, photonic crystals, ferroelectric coatings, and photocatalysts; Characterization of Sol-Gel Materials and Products, presenting contributions that highlight the notion that useful materials are only produced when characterization is tied to processing, such as determination of structure by NMR, in-situ characterization of the sol-gel reaction process, determination of microstructure of oxide gels, characterization of porous structure of gels by the surface measurements, and characterization of organic-inorganic hybrid; and Applications of Sol-Gel Technology, covering applications such as the sol-gel method used in processing of bulk silica glasses, bulk porous gels prepared by sol-gel method, application of sol-gel method to fabrication of glass and ceramic fibers, reflective and antireflective coating films, application of sol-gel method to formation of photocatalytic coating films, and application of sol-gel method to bioactive coating films. The comprehensive scope and integrated treatment of topics make this reference volume ideal for R&D scientists and engineers across a wide range of disciplines and professional interests.
Download or read book The Sol Gel Handbook 3 Volume Set written by David Levy and published by John Wiley & Sons. This book was released on 2015-11-02 with total page 1604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive three-volume handbook brings together a review of the current state together with the latest developments in sol-gel technology to put forward new ideas. The first volume, dedicated to synthesis and shaping, gives an in-depth overview of the wet-chemical processes that constitute the core of the sol-gel method and presents the various pathways for the successful synthesis of inorganic and hybrid organic-inorganic materials, bio- and bio-inspired materials, powders, particles and fibers as well as sol-gel derived thin films, coatings and surfaces. The second volume deals with the mechanical, optical, electrical and magnetic properties of sol-gel derived materials and the methods for their characterization such as diffraction methods and nuclear magnetic resonance, infrared and Raman spectroscopies. The third volume concentrates on the various applications in the fields of membrane science, catalysis, energy research, biomaterials science, biomedicine, photonics and electronics.
Download or read book Nanostructured Thin Films and Coatings written by Sam Zhang and published by CRC Press. This book was released on 2010-06-18 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by leading experts from around the world, the three-volume Handbook of Nanostructured Thin Films and Coatings gives scientific researchers and product engineers a resource as dynamic and flexible as the field itself. The first two volumes cover the latest research and application of the mechanical and functional properties of thin films an
Download or read book Hybrid Nanofluids for Convection Heat Transfer written by Hafiz Muhammad Ali and published by Academic Press. This book was released on 2020-05-15 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Nanofluids for Convection Heat Transfer discusses how to maximize heat transfer rates with the addition of nanoparticles into conventional heat transfer fluids. The book addresses definitions, preparation techniques, thermophysical properties and heat transfer characteristics with mathematical models, performance-affecting factors, and core applications with implementation challenges of hybrid nanofluids. The work adopts mathematical models and schematic diagrams in review of available experimental methods. It enables readers to create new techniques, resolve existing research problems, and ultimately to implement hybrid nanofluids in convection heat transfer applications. - Provides key heat transfer performance and thermophysical characteristics of hybrid nanofluids - Reviews parameter selection and property measurement techniques for thermal performance calibration - Explores the use of predictive mathematical techniques for experimental properties
Download or read book Smart Ceramics written by Ajay Kumar Mishra and published by CRC Press. This book was released on 2018-03-05 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in nanotechnology have paved the way for the development of new smart materials. The term "smart ceramics" refers to ceramic materials fabricated from ultrafine particles. They have attracted the attention of researchers and scientists thanks to their potential to manipulate the length scale in the nanorange, leading to better and some unusual material properties. Smart ceramics ensure control of particle size, surface contamination, and degree of agglomeration. They play a crucial role in challenging applications such as bone surgery (e.g., the development of substitutes for load-bearing bone parts) and in biomedical science, especially in tissue engineering, dental applications, and drug and antigen delivery using modified ceramics. Porous nanostructured ceramics have potential use in both simple and complex applications, such as bioimaging, sensors, paints and pigments, optics, and electronics, because of their surface- and size-dependent properties. For the synthesis of smart ceramics, the sol-gel route has been mainly utilized because of its ability to produce a large variety of compositions and to ensure homogeneous mixing of the constituent particles at low temperature. This book describes the innovations in technologies through the development of functionalized ceramic materials for various applications. It also describes recent and expected challenges, along with their potential solutions, in advanced techniques for the synthesis and characterization of nanostructured ceramics and their composites: bioceramics, bioactive ceramics, multifunctional nanoceramics, transparent ceramics, nanocore shells, nanowires, thin films, nanotubes, and nanorods. The applications include the environment, health care, electrochemical sensors, high-temperature superconductors, nuclear reactor fuels, electrical insulators, refractory materials, electrical transformers, and magnetic core memory. The book will benefit researchers, scientists, engineers, and technologists working in the industry and in national and international research laboratories; academics who are interested in traditional and advanced smart ceramic composites; and students pursuing their postgraduate, graduate, and undergraduate degrees in smart ceramics, nanomaterials, nanoscience, and engineering.
Download or read book Magnetic Oxides and Composites written by Rajshree B. Jotania and published by Materials Research Forum LLC. This book was released on 2018-05-10 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on the relevant basic concepts of Magnetic oxides, as well as on synthesis routes and important applications of spinel ferrites, hexaferrites and magnetic oxide nanomaterials. Keywords: Magnetic Oxides, Spinel Ferrites, Hexaferrites, Magnetoelectric Ceramic Composites, Soft Ferrites, Nano-Size Spinel Ferrites, Magnetic Nanoparticles, Device Miniaturization.
Download or read book Modern Drying Technology Volume 3 written by Evangelos Tsotsas and published by John Wiley & Sons. This book was released on 2011-08-29 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This five-volume series provides a comprehensive overview of all important aspects of modern drying technology, concentrating on the transfer of cutting-edge research results to industrial use. Volume 3 discusses how desired properties of foods, biomaterials, active pharmaceutical ingredients, and fragile aerogels can be preserved during drying, and how spray drying and spray fluidized bed processes can be used for particle formation and formulation. Methods for monitoring product quality, such as process analytical technology, and modeling tools, such as Monte Carlo simulations, discrete particle modeling and neural networks, are presented with real examples from industry and academia.
Download or read book Anti Abrasive Nanocoatings written by M Aliofkhazraei and published by Elsevier. This book was released on 2014-12-09 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the fabrication methods for anti-abrasive nanocoatings. The connections among fabrication parameters, the characteristics of nanocoatings and the resulting properties (i.e. nanohardness, toughness, wear rate, load-bearing ability, friction coefficient, and scratch resistance) are discussed. Size-affected mechanical properties of nanocoatings are examined, including their uses. Anti-abrasive nanocoatings, including metallic-, ceramic-, and polymeric-based layers, as well as different kinds of nanostructures, such as multi-layered nanocomposites and thin films, are reviewed. - Provides a comprehensive overview of the fabrication methods for anti-abrasive nanocoatings - Discusses the connections among fabrication parameters, the characteristics of nanocoatings and the resulting properties - Reviews advantages and drawbacks of fabrication methods for anti-abrasive nanocoatings and clarifies the place of these nanocoatings in the world of nanotechnology
Download or read book Handbook of sol gel science and technology 3 Applications of sol gel technology written by Sumio Sakka and published by Springer Science & Business Media. This book was released on 2005 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since Dr. Disiich of Germany prepared a glass lens by the sol-gel method around 1970, sol-gel science and technology has continued to develop. Since then this field has seen remarkable technical developments as well as a broadening of the applications of sol-gel science and technology. There is a growing need for a comprehensive reference that treats both the fundamentals and the applications, and this is the aim of "Handbook of Sol-Gel Science and Technology."The primary purpose of sol-gel science and technology is to produce materials, active and non-active including optical, electronic, chemical, sensor, bio- and structural materials. This means that sol-gel science and technology is related to all kinds of manufacturing industries. Thus Volume 1, "Sol-Gel Processing," is devoted to general aspects of processing. Newly developed materials such as organic-inorganic hybrids, photonic crystals, ferroelectric coatings, photocatalysts will be covered. Topics in this volume include: Volume 2, "Characterization of Sol-Gel Materials and Products, "highlights the important fact that useful materials are only produced when characterization is tied to processing. Furthermore, characterization is essential to the understanding of nanostructured materials, and sol-gel technology is a most important technology in this new field. Since nanomaterials display their functional property based on their nano- and micro-structure, "characterization" is very important. Topics found in Volume 2 include: Sol-gel technology is a versatile technology, making it possible to produce a wide variety of materials and to provide existing substances with novel properties. This technology was applied to producingnovel materials, for example organic-inorganic hybrids, which are quite difficult to make by other fabricating techniques, and it was also applied to producing materials based on high temperature superconducting oxides. "Applications of Sol-Gel Technology," (Volume 3), will cover applications such as:
Download or read book The Sol Gel Handbook written by David Levy and published by John Wiley & Sons. This book was released on 2015-08-28 with total page 1616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive three-volume handbook brings together a review of the current state together with the latest developments in sol-gel technology to put forward new ideas. The first volume, dedicated to synthesis and shaping, gives an in-depth overview of the wet-chemical processes that constitute the core of the sol-gel method and presents the various pathways for the successful synthesis of inorganic and hybrid organic-inorganic materials, bio- and bio-inspired materials, powders, particles and fibers as well as sol-gel derived thin films, coatings and surfaces. The second volume deals with the mechanical, optical, electrical and magnetic properties of sol-gel derived materials and the methods for their characterization such as diffraction methods and nuclear magnetic resonance, infrared and Raman spectroscopies. The third volume concentrates on the various applications in the fields of membrane science, catalysis, energy research, biomaterials science, biomedicine, photonics and electronics.
Download or read book Journal of the Australian Ceramic Society written by and published by . This book was released on 2006 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Applied Materials and Electronics Engineering II written by Brendan Gan and published by Trans Tech Publications Ltd. This book was released on 2013-04-24 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2013 2nd International Conference on Applied Materials and Electronics Engineering (AMEE 2013), April 19-20, 2013, Hong Kong
Download or read book Organic Inorganic Hybrid Materials written by Jesús-María García- Martínez and published by MDPI. This book was released on 2021-10-27 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with one of the most attractive fields in material science and technology research. In fact, the concept of organic–inorganic hybrid materials is applied to a wide variety of approaches that include materials with inorganic and/or organic nature with respect to their matrices and/or dispersed phase. The present book compiles one editorial and eleven approaches to the topic, and intends to provide a transversal idea about what the field of the so-called organic–inorganic hybrid materials means in actual scientific scenarios. In any case, the role is pointed out of the interphase between the components as the critical aspect to consider, as a way to enhance and understand these components in order to design materials with "tailor-made" organized structures considering the increasing nano-, meso-, micro- and macro-scales.
Download or read book Organic Nanostructured Thin Film Devices and Coatings for Clean Energy written by Sam Zhang and published by . This book was released on 2010 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:
