Download or read book Handbook of Plastic Foams written by Arthur H. Landrock and published by Elsevier. This book was released on 1995-12-31 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to be a source of practical information on all types of plastic foams (cellular plastics) in use, including the new structural plastic foams. Elastomer (rubber-like) foams are also considered. The book is intended primarily for those who require a non-theoretical, authoritative, easy-to-use handbook in the subject area. It should be of value to materials engineers, plastics fabricators, chemists, chemical engineers and students. Recognized authorities have written several chapters and parts of chapters in their fields of expertise. The book is organized in such a way that information on a desired subject can be found rapidly. An unusual feature is a comprehensive listing of all known standardization documents (test methods, practices, and specifications), including some international standards. Each document includes a brief description of its contents.
Download or read book Handbook of Polymer Foams written by David Eaves and published by iSmithers Rapra Publishing. This book was released on 2004 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook reviews the chemistry, manufacturing methods, properties and applications of the synthetic polymer foams used in most applications. In addition, a chapter is included on the fundamental principles, which apply to all polymer foams. There is also a chapter on the blowing agents used to expand polymers and a chapter is on microcellular foams - a relatively new development where applications are still being explored.
Download or read book Handbook of Polymer Foams written by David Eaves and published by Rapra Technology. This book was released on 2004-01-01 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of polymer foams is extremely widespread. Indeed, it is hard to think of any industries where polymer foams do not have a part to play. They can be found for example in sports and leisure products, in military applications, in vehicles, in aircraft, and in the home. Most people will encounter polymer foams every day in one form or another, whether it be in furniture, in packaging, in their car, in refrigerator insulation, or in some other common application. Although naturally occurring polymer foams have been known for a long time, (e.g., sponges, cork), synthetic polymer foams have only been introduced to the market over the last fifty years or so. The development of a new polymer has usually been quickly followed by its production in an expanded or foam form owing to the unique and useful properties, which can be realised in the expanded state. This handbook reviews the chemistry, manufacturing methods, properties and applications of the synthetic polymer foams used in most applications. In addition, a chapter is included on the fundamental principles, which apply to all polymer foams. There is also a chapter on the blowing agents used to expand polymers, blowing agents having undergone considerable change and development in recent years in order to meet the requirements of the Montreal Protocol in relation to the reduction and elimination of chloroflurocarbons (CFC) and other ozone depleting agents. A chapter is also included on microcellular foams - a relatively new development where applications are still being explored. Most chapters have references to facilitate further exploration of the topics. The chapters are all written by experts in the field. This book will be of interest to those just embarking upon an exploration of the subject of foams, whether in industry or academia. But this will be equally useful to those already working in the field, who need to know about different types of foam.
Download or read book Handbook of Plastic Foams written by Arthur H. Landrock and published by . This book was released on 1985 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes the state of the art of all types of cellular materials particularly those of a polymeric nature (plastics and elastomers). The report is organized in the form of a handbook and has an Introduction and sections on Types of Foams (Cellular Materials), Methods of Manufacture, Foam Properties, Solvent Cementing, and Adhesive Bonding of Foams, Methods of Making Foams Conductive, and Applications. There are two Appendices, one on Standardization Documents (Test Methods, Practices and Specifications) and the other on Definitions. A list of 57 references cited in the text is included.
Download or read book Polymer Foams Handbook written by Nigel Mills and published by Butterworth-Heinemann. This book was released on 2007-03-23 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: From crash helmets to packaging, this is the complete guide to understanding, selecting, processing and working with polymer foams.
Download or read book Handbook of Foaming and Blowing Agents written by George Wypych and published by Elsevier. This book was released on 2022-03-12 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Foaming and Blowing Agents, Second Edition includes the most current information on foaming technology, guiding users on the proper selection of formulation, which is highly dependent on the mechanisms of action of blowing agents and foaming agents, as well as dispersion and solubility. The book includes properties of 23 groups of blowing agents and the typical range of technical performance for each group, including general properties, physical-chemical properties, health and safety, environmental impact, and applications in different products and polymers. All information is illustrated by chemical reactions and diagrams. Chapters in the book look at foaming mechanisms with the use of solid blowing agents, which are decomposed to the gaseous products by application of heat, production of gaseous products by chemical reaction, and foaming by gases and evaporating liquids. - Introduces the fundamental mechanisms of action of blowing agents and foaming - Includes best practice guidance to help engineers and technicians improve the efficiency of their existing foaming processes - Enables practitioners to select blowing agents and foaming methods more effectively, thus reducing the risk of poor specification - Introduces useful analytical techniques for foaming - Discusses the environmental impact of foaming processes
Download or read book Handbook of Plastic Processes written by Charles A. Harper and published by John Wiley & Sons. This book was released on 2006-05-26 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: An outstanding and thorough presentation of the complete field of plastics processing Handbook of Plastic Processes is the only comprehensive reference covering not just one, but all major processes used to produce plastic products-helping designers and manufacturers in selecting the best process for a given product while enabling users to better understand the performance characteristics of each process. The authors, all experts in their fields, explain in clear, concise, and practical terms the advantages, uses, and limitations of each process, as well as the most modern and up-to-date technologies available in their application. Coverage includes chapters on: Injection molding Compression and transfer molding Sheet extrusion Blow molding Calendering Foam processing Reinforced plastics processing Liquid resin processing Rotational molding Thermoforming Reaction injection molding Compounding, mixing, and blending Machining and mechanical fabrication Assembly, finishing, and decorating Each chapter details a particular process, its variations, the equipment used, the range of materials utilized in the process, and its advantages and limitations. Because of its increasing impact on the industry, the editor has also added a chapter on nanotechnology in plastics processing.
Download or read book Handbook of Foamed Plastics written by Rene J. Bender and published by . This book was released on 1965 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastics Technology Handbook Fourth Edition written by Manas Chanda and published by CRC Press. This book was released on 2006-12-19 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because the field of plastics is one of the fastest changing areas today, the need arises to offer relevant, comprehensive material on polymers. An established source of information on modern plastics, the Plastics Technology Handbook continues to provide up-to-date coverage on the properties, processing methods, and applications of polymers. Retaining the easy-to-follow structure of the previous editions, this fourth edition includes new topics of interest that reflect recent developments and lead to better insights into the molecular behavior of polymers. New to the Fourth Edition Advances in supramolecular polymerization, flame retardancy, polymer-based nanomedicines, and drug delivery The new concept of oxo-biodegradable polymers Broadened discussion on plastic foams and foam extrusion processes More information on the processing and applications of industrial polymers, including the emerging field of nanoblends Developments in polymer synthesis and applications, such as polymeric sensors, hydrogels and smart polymers, hyperbranched polymers, shape memory polymers, polymeric optical fibers, scavenger resins, polymer nanocomposites, polymerization-filled composites, and wood-polymer composites A state-of-the-art account of the various available methods for plastics recycling Advances in the use of polymers in packaging, construction, the automotive and aerospace industries, agriculture, electronics and electrical technology, biomedical applications, corrosion prevention, and sports and marine applications Plastics Technology Handbook, Fourth Edition thoroughly covers traditional industrial polymers and their processing methods as well as contemporary polymeric materials, recent trends, and the latest applications.
Download or read book Brydson s Plastics Materials written by Marianne Gilbert and published by William Andrew. This book was released on 2016-09-27 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brydson's Plastics Materials, Eighth Edition, provides a comprehensive overview of the commercially available plastics materials that bridge the gap between theory and practice. The book enables scientists to understand the commercial implications of their work and provides engineers with essential theory. Since the previous edition, many developments have taken place in plastics materials, such as the growth in the commercial use of sustainable bioplastics, so this book brings the user fully up-to-date with the latest materials, references, units, and figures that have all been thoroughly updated. The book remains the authoritiative resource for engineers, suppliers, researchers, materials scientists, and academics in the field of polymers, including current best practice, processing, and material selection information and health and safety guidance, along with discussions of sustainability and the commercial importance of various plastics and additives, including nanofillers and graphene as property modifiers. With a 50 year history as the principal reference in the field of plastics material, and fully updated by an expert team of polymer scientists and engineers, this book is essential reading for researchers and practitioners in this field. - Presents a one-stop-shop for easily accessible information on plastics materials, now updated to include the latest biopolymers, high temperature engineering plastics, thermoplastic elastomers, and more - Includes thoroughly revised and reorganised material as contributed by an expert team who make the book relevant to all plastics engineers, materials scientists, and students of polymers - Includes the latest guidance on health, safety, and sustainability, including materials safety data sheets, local regulations, and a discussion of recycling issues
Download or read book Speciality Plastics Foams Urethane Flexible Rigid Pet Preform Processing Technology Handbook written by NIIR Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2005-10-01 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic technology is one of the fields where people can show their ability and performance both theoretically and practically. The Indian plastic and polymer industry has taken great strides. In the last few decades, the industry has grown to the status of a leading sector in the country with a sizable base. The material is gaining notable importance in different spheres of activity and the per capita consumption is increasing at a fast pace. Continuous advancements and developments in polymer technology, processing machineries, expertise and cost effective manufacturing is fast replacing the typical materials in different segments with plastics. Some examples of the specialty plastics are polytetra fluoroethylene (PTFE) , thermoplastic polyurethanes (TPU), polysulphones (PSO), polyester sulphone (PES), polyarylates, polyamide imide (PAI), etc. Polyurethane is polymer composed of a chain of organic units joined by carbamate (urethane) links. Polyurethane polymers are formed by combining two bi or higher functional monomers. Urethane foam is an artificial material with several different uses. The manufacturing process can produce foams of varying densities and flexibilities. This means it can serve functions as diverse as bedding, packaging and footwear. It is important to note that urethane foam is most commonly used to refer to a material made from polyurethane. Furniture, bedding, automotive interiors, energy management, footwear and insulation utilize flexible foam technology due to its wide range of density, cushioning ability and versatility of use. Appliance (refrigeration, water heaters), construction panels, roofing boardstock, and spray applied insulation utilize rigid polyurethane foam due its superior insulating and mechanical properties to reduce energy consumption and enhance structural integrity of the finished product. The versatility of the technology and processability makes rigid polyurethane foam uniquely suited for other applications, like architectural molding, energy absorbing materials in automobiles, entry doors, and even picnic coolers. Polymer Energy system is an award winning, innovative, proprietary process to convert waste plastics into renewable energy. Polymers are the most rapidly growing sector of the materials industry. Some fundamentals of the book are properties and applications of speciality plastics, thermoplastic polyurethanes, formation of urethane foams, flexible foams, variables in the preparation of prepolymers, procedures for the preparation of prepolymers, catalyzed prepolymer preparation, application of flexible foams, applications of rigid foams, one-stage injection stretch blow moulding, pet material and applications, injection and co-injection preform technologies, pet film and sheet, plastics as safe & hygienic medium for packaging food & food products. The book covers processes and other required information for the manufacturing of different specialty plastics, Foams, PET and Pre form PET etc. This is very useful book for new entrepreneurs, technocrats, existing units, institutional libraries etc. TAGS Applications of speciality plastics, Business guidance for PET Preform and Plastics industry, Business guidance to clients, Business Plan for a Startup Business, Business start-up, Flexible and Rigid Foams, Flexible Polyurethane Foam, Flexible Polyurethane Foam: Industry, Foam manufacturing process, Foam production process, Formation of urethane foams, How polyurethane foam is made, How polyurethane foam is made, How to make polyurethane foam, How to Start a Foam Production Company, How to Start a PET Preform Production Business, How to Start a Plastic Recycling Manufacturing Business, How to Start a Specialty plastic Manufacturing Business?, How to start a successful PET Preform business, How to Start Specialty plastic Processing Industry in India, Indian polyurethane foam market, Manufacturing of Flexible Foams, Manufacturing of Foams, Manufacturing of Injection and Co-Injection Preform, Manufacturing of Pet & Preform, Manufacturing of Pet Film and Sheet, Manufacturing of Plastic products, Manufacturing of Preform bottles, Manufacturing of Rigid Foams, Manufacturing of Urethane Foams, Manufacturing Polyurethane foams, Most Profitable Specialty plastic Processing Business Ideas, New business model for specialty plastics, New small scale ideas in Specialty plastic processing industry, PE foam, PET (Polyethylene Terephthalate) sheets, PET Bottle Making, PET Preform and Plastics Business, PET Preform Based Small Scale Industries Projects, PET Preform making machine factory, PET Preform Making Small Business Manufacturing, PET Preform Making, Pet preform manufacturing process, Pet preform manufacturing, PET Preform Plastic Injection Molding, PET Processing - Injection Molding Plastics Technology, Plastic Manufacturing Company - Business Plan, Plastic packaging industry, Plastic Protective Packaging, Polyethylene foam, Polyurethane Rigid Foam manufacturing process, Polyurethanes, Preform Injection Molding Production, Process technology books, Production of Polyurethane Foam, Production of rigid polyurethane foam, Profitable growth with Specialty plastics business, Profitable Small Scale PET Preform and Plastics Manufacturing, Properties of speciality plastics, PU foam manufacturing process, Setting up and opening your Specialty plastic Business, Small scale Commercial PET Preform making, Small scale PET Preform production line, Small Scale Specialty plastic Processing Projects, Speciality Plastics, Specialty plastic Based Profitable Projects, Specialty plastic Processing Industry in India, Specialty plastic Processing Projects, Specialty Plastics and Polymer Additives Businesses, Specialty plastics business, Start Your Own Pet Bottle Business, Starting a PET Preform Business, Starting a plastics product manufacturing, Start-up Business Plan for PET Preform Business, Startup ideas, Startup Project for Specialty plastic Business, Startup
Download or read book Handbook of Polymeric Foams and Foam Technology written by Daniel Klempner and published by . This book was released on 1991 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important new handbook draws on the experience of leading industrial and academic specialists to describe virtually every type of polymer foam. The book is the intended to help scientists, engineers and technicians in their efforts to develop practical solutions for industrial design and process manufacturing challenges. It fully describes all classes of polymeric foam including their chemistry, synthesis, commercial production methods, properties and applications. Fundamentals of foam formation are also carefully explained. The internationally known contributors present data and techniques relevant to the study of polymer composites and other materials, along with manufacturing techniques for foamed and porous plastics. Amply illustrated, carefully indexed, and organized by incremental headings for easy reference, the handbook is the first comprehensive reference on the subject, offering a huge store of information in one convenient resource.
Download or read book Handbook of Thermosetting Foams Aerogels and Hydrogels written by Prasanth Raghavan and published by Elsevier. This book was released on 2024-06-05 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermosetting Foams, Aerogels, and Hydrogels: From Fundamentals to Advanced Applications presents the latest on the preparation, characterization, properties and applications of thermoset foams, aerogels and hydrogels. The book begins by introducing each of these concepts and their characteristics, current applications, potential for further development, and environmental impacts. This is followed by three sections, each focusing on foams, aerogels and hydrogels developed from a specific thermosetting polymer category, covering polyurethane, epoxy resins and formaldehyde. In each section, detailed coverage includes preparation, structure, characterization, properties, processing and applications based on material, along with key challenges in design, processing, implementation and solutions.This is a valuable resource for researchers and advanced students with an interest in thermoset lightweight materials across the disciplines of polymer science, chemistry, nanotechnology, materials science and engineering. The book will also be of interest to R&D professionals, engineers and scientists working with foams, hydrogels and aerogels for a range of applications and industries. - Provides methodical coverage of polyurethane, epoxy, and formaldehyde-based foams, aerogels, and hydrogels - Explores a range of high-value applications across automotive and aerospace, defense, biomedicine, and other areas - Considers challenges in design, processing, and implementation, and environmental aspects such as biodegradability and recyclability
Download or read book SPI Plastics Engineering Handbook of the Society of the Plastics Industry Inc written by Michael L. Berins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1139 pages. Available in PDF, EPUB and Kindle. Book excerpt: I am pleased to present the Fifth Edition of the Plastics Engineering Handbook. Last published in 1976, this version of the standard industry reference on plastics processing incorporates the numerous revisions and additions necessitated by 14 years of activity in a dynamic industry. At that last printing, then-SPI President Ralph L. Harding, Jr. anticipated that plastics pro duction would top 26 billion pounds in 1976 (up from 1.25 billion in 1947, when the First Edition of this book was issued). As I write, plastics production in the United States had reached almost 60 billion pounds annually. Indeed, the story of the U.S. plastics industry always has been one of phenomenal growth and unparalleled innovation. While these factors make compilation of a book such as this difficult, they also make it necessary. Thus I acknowledge all those who worked to gather and relate the information included in this 1991 edition and thank them for the effort it took to make the Plastics Engineering Handbook a definitive source and invaluable tool for our industry. Larry L. Thomas President The Society of the Plastics Industry, Inc.
Download or read book Polymeric Foams written by Shau-Tarng Lee and published by CRC Press. This book was released on 2004-05-27 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the inaugural volume a series entitled Polymeric Foams: Technology and Applications. Generally, thermoplastic and thermoset foams have been treated as two separate practices in industry. Polymeric Foams: Mechanisms and Materials presents the basics of foaming in general build a strong foundation to those working in both thermoplastic a
Download or read book Recycling of Polyurethane Foams written by Sabu Thomas and published by William Andrew. This book was released on 2018-06-06 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycling of Polyurethane Foams introduces the main degradation/depolymerization processes and pathways of polyurethane foam materials, focusing on industrial case studies and academic reviews from recent research and development projects. The book can aid practitioners in understanding the basis of polymer degradation and its relationship with industrial processes, which can be of substantial value to industrial complexes the world over. The main pathways of polymer recycling via different routes and industrial schemes are detailed, covering all current techniques, including regrinding, rebinding, adhesive pressing and compression moulding of recovered PU materials that are then compared with depolymerization approaches. The book examines life cycle assessment and cost analysis associated with polyurethane foams waste management, showing the potential of various techniques. This book will help academics and researchers identify and improve on current depolymerization processes, and it will help industry sustainability professionals choose the appropriate approach for their own waste management systems, thus minimizing the costs and environmental impact of their PU-based end products. - Offers a comprehensive review of all polyurethane foam recycling processes, including both chemical and mechanical approaches - Assesses the potential of each recycling process - Helps industry-based practitioners decide which approach to take to minimize the cost and environmental impact of their end product - Enables academics and researchers to identify and improve upon current processes of degradation and depolymerization
Download or read book Rigid Plastics Foams written by T. H. Ferrigno and published by . This book was released on 1975 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
