Download or read book Handbook of MTBE and Other Gasoline Oxygenates written by Halim Hamid and published by CRC Press. This book was released on 2004-03-11 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook presents the outlook for future production and consumption of MTBE and other oxygenates worldwide and studies new catalytic systems and modern methods for the synthesis and commercial production of methyl tertiary-butyl ether (MTBE) and related ethers. The scope of this sophisticated guide extends from process chemistry fundamentals a

Download or read book Handbook of MTBE and Other Gasoline Oxygenates written by Halim Hamid and published by CRC Press. This book was released on 2004-03-11 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook presents the outlook for future production and consumption of MTBE and other oxygenates worldwide and studies new catalytic systems and modern methods for the synthesis and commercial production of methyl tertiary-butyl ether (MTBE) and related ethers. The scope of this sophisticated guide extends from process chemistry fundamentals a

Download or read book Fuel Oxygenates written by Damià Barceló and published by Springer Science & Business Media. This book was released on 2007-08-03 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals mainly with the problems associated with the contamination of groundwater by MTBE and TBA, but ETBE is also considered. The book, written by recognized specialists in the field, is organized in sections covering state-of-the-art analytical methods, including specific isotopic analysis, occurrence in the environment, transport and degradation processes, treatment technologies and human health risks.

Download or read book Catalytic Naphtha Reforming Revised and Expanded written by George J. Antos and published by CRC Press. This book was released on 2004-02-23 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic Naphtha Reforming, Second Edition presents modern, crystal-clear explanations of every aspect of this critical process for generating high-octane reformate products for gasoline blending and production of benzene, toluene, and xylene (BTX) aromatics. The book details the chemistry of naphtha reforming, the preparation and characterization

Download or read book Chemical Reaction Engineering and Reactor Technology written by Tapio O. Salmi and published by CRC Press. This book was released on 2011-07-01 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The role of the chemical reactor is crucial for the industrial conversion of raw materials into products and numerous factors must be considered when selecting an appropriate and efficient chemical reactor. Chemical Reaction Engineering and Reactor Technology defines the qualitative aspects that affect the selection of an industrial chemical reactor and couples various reactor models to case-specific kinetic expressions for chemical processes. Offering a systematic development of the chemical reaction engineering concept, this volume explores: Essential stoichiometric, kinetic, and thermodynamic terms needed in the analysis of chemical reactors Homogeneous and heterogeneous reactors Residence time distributions and non-ideal flow conditions in industrial reactors Solutions of algebraic and ordinary differential equation systems Gas- and liquid-phase diffusion coefficients and gas-film coefficients Correlations for gas-liquid systems Solubilities of gases in liquids Guidelines for laboratory reactors and the estimation of kinetic parameters The authors pay special attention to the exact formulations and derivations of mass energy balances and their numerical solutions. Richly illustrated and containing exercises and solutions covering a number of processes, from oil refining to the development of specialty and fine chemicals, the text provides a clear understanding of chemical reactor analysis and design.

Download or read book Alcoholic Fuels written by Shelley Minteer and published by CRC Press. This book was released on 2016-04-19 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientists and engineers have made significant advances over the last two decades to achieve feasible, cost-efficient processes for the large-scale production of alternative, environmentally friendly sources of energy. Alcoholic Fuels describes the latest methods for producing fuels containing varying percentages of alcohol alongside the var

Download or read book Interfacial Properties of Petroleum Products written by Lilianna Z. Pillon and published by CRC Press. This book was released on 2007-11-28 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: With mounting pressure to extract petroleum from oil sands and other unconventional sources, oil refineries must adapt their processing methods to handle increasingly heavy crude oils. Unlike traditional crude oils, the properties of heavier crude oils include higher viscosity, metal, salt, and acid content. This causes their interfacial properties

Download or read book The Chemistry and Technology of Petroleum written by James G. Speight and published by CRC Press. This book was released on 2006-10-31 with total page 982 pages. Available in PDF, EPUB and Kindle. Book excerpt: Refineries must not only adapt to evolving environmental regulations for cleaner product specifications and processing, but also find ways to meet the increasing demand for petroleum products,particularly for liquid fuels and petrochemical feedstocks. The Chemistry and Technology of Petroleum, Fourth Edition offers a 21st century perspective

Download or read book Process Chemistry of Petroleum Macromolecules written by Irwin A. Wiehe and published by CRC Press. This book was released on 2008-06-20 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although there is a shortage of light petroleum, there is plenty of heavy petroleum rich in macromolecules available, creating an increasing interest for processes that can convert heavy oils to light oils. Process Chemistry of Petroleum Macromolecules provides the scientific basis for such processes, presenting methods to determine improvement potential. Topics include characterization, thermal kinetics, phase behavior, and separation. Revealing that the science of petroleum macromolecules is simpler and more exciting than imagined, it also discusses macromolecules that self-associate, liquid crystalline phases, reactions triggered by phase separation, and both dispersed and dissolved solutes.

Download or read book Industrial Chemical Cresols and Downstream Derivatives written by Asim Kumar Mukhopadhyay and published by CRC Press. This book was released on 2004-12-20 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Meeting the need for a comprehensive source addressing every aspect of cresol production, analysis, and impact, this detailed reference offers the most up-to-date account of cresols and their downstream derivatives, written by an internationally renowned consultant in the fine chemicals industry. This guide provides a comprehensive and in-depth dis

Download or read book Chemical Process Performance Evaluation written by Ali Cinar and published by CRC Press. This book was released on 2007-01-11 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest advances in process monitoring, data analysis, and control systems are increasingly useful for maintaining the safety, flexibility, and environmental compliance of industrial manufacturing operations. Focusing on continuous, multivariate processes, Chemical Process Performance Evaluation introduces statistical methods and modeling te

Download or read book Automotive Fuels Reference Book written by Paul Richards and published by SAE International. This book was released on 2014-03-05 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first two editions of this title, published by SAE International in 1990 and 1995, have been best-selling definitive references for those needing technical information about automotive fuels. This long-awaited new edition has been thoroughly revised and updated, yet retains the original fundamental fuels information that readers find so useful. This book is written for those with an interest in or a need to understand automotive fuels. Because automotive fuels can no longer be developed in isolation from the engines that will convert the fuel into the power necessary to drive our automobiles, knowledge of automotive fuels will also be essential to those working with automotive engines. Small quantities of fuel additives increasingly play an important role in bridging the gap that often exists between fuel that can easily be produced and fuel that is needed by the ever-more sophisticated automotive engine. This book pulls together in a single, extensively referenced volume, the three different but related topics of automotive fuels, fuel additives, and engines, and shows how all three areas work together. It includes a brief history of automotive fuels development, followed by chapters on automotive fuels manufacture from crude oil and other fossil sources. One chapter is dedicated to the manufacture of automotive fuels and fuel blending components from renewable sources. The safe handling, transport, and storage of fuels, from all sources, are covered. New combustion systems to achieve reduced emissions and increased efficiency are discussed, and the way in which the fuels’ physical and chemical characteristics affect these combustion processes and the emissions produced are included. There is also discussion on engine fuel system development and how these different systems affect the corresponding fuel requirements. Because the book is for a global market, fuel system technologies that only exist in the legacy fleet in some markets are included. The way in which fuel requirements are developed and specified is discussed. This covers test methods from simple laboratory bench tests, through engine testing, and long-term test procedures.

Download or read book Lubricant Additives written by Leslie R. Rudnick and published by CRC Press. This book was released on 2009-04-20 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cost, environmental, and performance issues coupled with legislative changes, new engine oil requirements, and technology development for exploration of space and the oceans are changing the lubrication additive market. Reflecting how the need for new applications drives the development of new lubricant additives, Lubricant Additives: Chemistry and Applications, Second Edition presents methods to: Improve the performance, efficiency, and stability of lubricants Protect metal surfaces from wear Select lubricant additives for the food processing industry Select the most appropriate ashless additives Avoid microbial degradation of lubricants Lower toxicity And describes: Standard lubricant testing methods and product specifications Mechanisms and benefits of specific types of lubricant additives Recent industry trends Up-to-Date Coverage of Lubricant Additive Chemistry and Technology Addressing new trends in various industrial sectors and improvements in technology, this second edition provides detailed reviews of additives used in lubricant formulations, their chemistry, mechanisms of action, and trends for major areas of application. It explores the design of cost-effective, environmentally friendly lubricant technologies and lubricants for automotive, industrial, manufacturing, aerospace, and food-processing applications. An extensive list of online industry resources is available for download at crcpress.com.

Download or read book Transport Phenomena Fundamentals Second Edition written by Joel L. Plawsky and published by CRC Press. This book was released on 2009-09-24 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the practice of chemical engineering has broadened to encompass problems in a range of disciplines, including biology, biochemistry, and nanotechnology, one of the curriculum’s foundations is built upon the subject of transport phenomena. Transport Phenomena Fundamentals, Second Edition provides a unified treatment of heat, mass, and momentum transport based on a balance equation approach. Designed for a two-term course Used in a two-term transport phenomena sequence at Rensselaer Polytechnic Institute, this text streamlines the approach to how the subject is taught. The first part of the book takes students through the balance equation in the context of diffusive transport, be it momentum, energy, mass, or charge. Each chapter adds a term to the balance equation, highlighting the effects of that addition on the physical behavior of the system and the underlying mathematical description. The second half of the book builds upon the balance equation description of diffusive transport by introducing convective transport terms, focusing on partial rather than ordinary differential equations. The Navier–Stokes and convective transport equations are derived from balance equations in both macroscopic and microscopic forms. Includes examples and problems drawn from Comsol® software The second edition of this text is now enhanced by the use of finite element methods in the form of examples and extended homework problems. A series of example modules are associated with each chapter of the text. Some of the modules are used to produce examples in the text, and some are discussed in the homework at the end of each chapter. All of the modules are located online at an accompanying website which is designed to be a living component of the course. (available on the download tab)

Download or read book Alternative Fuels for Transportation written by A S Ramadhas and published by CRC Press. This book was released on 2016-04-19 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring how to counteract the world's energy insecurity and environmental pollution, this volume covers the production methods, properties, storage, engine tests, system modification, transportation and distribution, economics, safety aspects, applications, and material compatibility of alternative fuels. The esteemed editor highlights the importance of moving toward alternative fuels and the problems and environmental impact of depending on petroleum products. Each self-contained chapter focuses on a particular fuel source, including vegetable oils, biodiesel, methanol, ethanol, dimethyl ether, liquefied petroleum gas, natural gas, hydrogen, electric, fuel cells, and fuel from nonfood crops.

Download or read book Catalysis of Organic Reactions written by Michael L. Prunier and published by CRC Press. This book was released on 2008-12-24 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: Apply an Omnibus of Knowledge from Leaders in the Field The unexpected diversity of topics presented at previous gatherings forced organizers of 2008’s 22nd Conference on Catalysis of Organic Reactions to expand its format to reflect the remarkable current degree of specialization in the field. Catalysis of Organic Reactions contains a compilation of papers presented at the event, and subsequently, few books will be able to match the breadth and depth of its content. Featuring papers by respected scientists from academia, industry, and the governmental research-and-development sector, it covers various aspects of the production, sale, and use of catalysts for practical purposes. Articles concentrate on the general area of catalyzed synthesis, emphasizing the production of organic chemicals. With a focus on application rather than theory, the dominant theme is the traditionally practiced area of heterogeneous catalysis. Topics include: Hydrogenation and hydrogenolysis C-C coupling Amination and oxidation (including the precious metal, supported base metal, and sponge metal, Raney process, and homogeneous catalyst types) End uses of products, including industrial petrochemicals, fine chemicals, and pharma intermediates Those working with applied catalysis will benefit greatly from this consolidation of insights and reviews of the latest developments in the field. Each of the papers presented were edited by ORCS members, drawn from both academia and industry, and peer-reviewed by experts in related fields of study.

Download or read book Asphaltenes written by Jorge Ancheyta and published by CRC Press. This book was released on 2010-03-25 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the upgrading of heavy petroleum, asphaltene is the most problematic impurity since it is the main cause of catalyst deactivation and sediments formation. Exploring many aspects related to asphaltenes composition and conversion, Asphaltenes: Chemical Transformation during Hydroprocessing of Heavy Oils highlights the various changes that thes