Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Guide To Practical Human Reliability Assessment written by B. Kirwan and published by CRC Press. This book was released on 2017-12-14 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human error is here to stay. This perhaps obvious statement has a profound implication for society when faced with the types of hazardous system accidents that have occurred over the past three decades. Such accidents have been strongly influenced by human error, yet many system designs in existence or being planned and built do not take human error into consideration.; "A Guide to Practical Human Reliability Assessment" is a practical and pragmatic guide to the techniques and approaches of human reliability assessment HRA. lt offers the reader explanatory and practical methods which have been applied and have worked in high technology and high risk assessments - particularly but not exclusively to potentially hazardous industries such as exist in process control, nuclear power, chemical and petrochemical industries. A Guide to Practical Human Reliability Assessment offers the practitioner a comprehensive tool-kit of different approaches along with guidance on selecting different methods for different applications. It covers the risk assessment and the HRA process, as well as methods of task analysis, error identification, quantification, representation of errors in the risk analysis, followed by error reduction analysis, quality assurance and documentation. There are also a number of detailed case studies from nuclear, chemical, offshore, and marine HRA'S, exemplfying the image of techniques and the impact of HRA in existing and design-stage systems.

Download or read book Human Reliability Assessment Theory and Practice written by Anthony J. Spurgin and published by CRC Press. This book was released on 2009-10-08 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: A continually evolving discipline, human reliability assessment (HRA) has elements of controversy from the definition of terms to the application of appropriate methods for the representation of human failure probability. The idea that human error is a random event is falling out of favor and the concept that humans can be set up to fail or succeed

Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Elsevier. This book was released on 2005-01-25 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field

Download or read book Handbook of Human Factors and Ergonomics written by Gavriel Salvendy and published by John Wiley & Sons. This book was released on 2012-03-13 with total page 1754 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth edition of the Handbook of Human Factors and Ergonomics has been completely revised and updated. This includes all existing third edition chapters plus new chapters written to cover new areas. These include the following subjects: Managing low-back disorder risk in the workplace Online interactivity Neuroergonomics Office ergonomics Social networking HF&E in motor vehicle transportation User requirements Human factors and ergonomics in aviation Human factors in ambient intelligent environments As with the earlier editions, the main purpose of this handbook is to serve the needs of the human factors and ergonomics researchers, practitioners, and graduate students. Each chapter has a strong theory and scientific base, but is heavily focused on real world applications. As such, a significant number of case studies, examples, figures, and tables are included to aid in the understanding and application of the material covered.

Download or read book Risk Assessment written by Marvin Rausand and published by John Wiley & Sons. This book was released on 2013-06-12 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to risk assessment that utilizes key theory and state-of-the-art applications With its balanced coverage of theory and applications along with standards and regulations, Risk Assessment: Theory, Methods, and Applications serves as a comprehensive introduction to the topic. The book serves as a practical guide to current risk analysis and risk assessment, emphasizing the possibility of sudden, major accidents across various areas of practice from machinery and manufacturing processes to nuclear power plants and transportation systems. The author applies a uniform framework to the discussion of each method, setting forth clear objectives and descriptions, while also shedding light on applications, essential resources, and advantages and disadvantages. Following an introduction that provides an overview of risk assessment, the book is organized into two sections that outline key theory, methods, and applications. Introduction to Risk Assessment defines key concepts and details the steps of a thorough risk assessment along with the necessary quantitative risk measures. Chapters outline the overall risk assessment process, and a discussion of accident models and accident causation offers readers new insights into how and why accidents occur to help them make better assessments. Risk Assessment Methods and Applications carefully describes the most relevant methods for risk assessment, including preliminary hazard analysis, HAZOP, fault tree analysis, and event tree analysis. Here, each method is accompanied by a self-contained description as well as workflow diagrams and worksheets that illustrate the use of discussed techniques. Important problem areas in risk assessment, such as barriers and barrier analysis, human errors, and human reliability, are discussed along with uncertainty and sensitivity analysis. Each chapter concludes with a listing of resources for further study of the topic, and detailed appendices outline main results from probability and statistics, related formulas, and a listing of key terms used in risk assessment. A related website features problems that allow readers to test their comprehension of the presented material and supplemental slides to facilitate the learning process. Risk Assessment is an excellent book for courses on risk analysis and risk assessment at the upper-undergraduate and graduate levels. It also serves as a valuable reference for engineers, researchers, consultants, and practitioners who use risk assessment techniques in their everyday work.

Download or read book Simulator based Human Factors Studies Across 25 Years written by Ann Britt Skjerve and published by Springer Science & Business Media. This book was released on 2010-12-07 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Halden Man-Machine Laboratory (HAMMLAB) has been at the heart of human factors research at the OECD Halden Reactor Project (HRP). The HRP is sponsored by a group of national organizations, representing nuclear power plant regulators, utilities, and research institutions. The HRP is hosted by the Institute for Energy Technology (IFE) in Halden, Norway. HAMMLAB comprises three full-scale nuclear power plant control room research simulators. The simulator studies performed in HAMMLAB have traditionally been experimental in nature. In a simulator it is possible to study events as they unfold in real time, in a highly realistic operational environment under partially controlled conditions. This means that a wide range of human factors issues, which would be impossible or highly impracticable to study in real-life settings, can thus be addressed in HAMMLAB. Simulator-based Human Factors Studies Across 25 Years celebrates the twenty-fifth anniversary of HAMMLAB by reviewing the human factors studies performed in HAMMLAB across this time-span. A range of human factors issues have been addressed, including: • human-system interfaces; • alarm systems; • computerized procedures; • human-automation interaction; • staffing, teamwork and human reliability. The aim of HAMMLAB studies has always been the same: to generate knowledge for solving current and future challenges in nuclear power plant operation to contribute to safety. The outcomes of HAMMLAB studies have been used to support design and assessment of nuclear power plant control rooms.

Download or read book Risk Reliability and Safety Innovating Theory and Practice written by Lesley Walls and published by CRC Press. This book was released on 2016-11-25 with total page 4767 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe and reliable performance of many systems with which we interact daily has been achieved through the analysis and management of risk. From complex infrastructures to consumer durables, from engineering systems and technologies used in transportation, health, energy, chemical, oil, gas, aerospace, maritime, defence and other sectors, the management of risk during design, manufacture, operation and decommissioning is vital. Methods and models to support risk-informed decision-making are well established but are continually challenged by technology innovations, increasing interdependencies, and changes in societal expectations. Risk, Reliability and Safety contains papers describing innovations in theory and practice contributed to the scientific programme of the European Safety and Reliability conference (ESREL 2016), held at the University of Strathclyde in Glasgow, Scotland (25—29 September 2016). Authors include scientists, academics, practitioners, regulators and other key individuals with expertise and experience relevant to specific areas. Papers include domain specific applications as well as general modelling methods. Papers cover evaluation of contemporary solutions, exploration of future challenges, and exposition of concepts, methods and processes. Topics include human factors, occupational health and safety, dynamic and systems reliability modelling, maintenance optimisation, uncertainty analysis, resilience assessment, risk and crisis management.

Download or read book Engineering Psychology and Cognitive Ergonomics Cognition and Design written by Don Harris and published by Springer Nature. This book was released on 2020-07-10 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 17th International Conference on Engineering Psychology and Cognitive Ergonomics, EPCE 2020, held as part of the 22nd International Conference, HCI International 2020, which took place in Copenhagen, Denmark, in July 2020. The total of 1439 papers and 238 posters included in the 37 HCII 2020 proceedings volumes was carefully reviewed and selected from 6326 submissions. EPCE 2020 includes a total of 60 regular papers; they were organized in topical sections named: mental workload and performance; human physiology, human energy and cognition; cognition and design of complex and safety critical systems; human factors in human autonomy teaming and intelligent systems; cognitive psychology in aviation and automotive. As a result of the Danish Government's announcement, dated April 21, 2020, to ban all large events (above 500 participants) until September 1, 2020, the HCII 2020 conference was held virtually.

Download or read book Risk Based Technologies written by Prabhakar V. Varde and published by Springer. This book was released on 2018-12-10 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected topics in implementing a risk-based approach for complex engineering systems in general, and nuclear plants in particular. It addresses gap areas in implementing the risk-based approach to design, operation and regulation, covering materials reliability, digital system reliability, software reliability, human factor considerations, condition monitoring and prognosis, structural aspects in risk-based design as well as the application aspects like asset management for first-of-their-kind projects, strategic management and other academic aspect. Chapters are authored by renowned experts who address some of the identified challenges in implementation of risk-based approach in a clear and cogent manner, using illustrations, tables and photographs for ease of communication. This book will prove useful to researchers, professionals, and students alike.

Download or read book The Handbook of Human Machine Interaction written by Guy A. Boy and published by CRC Press. This book was released on 2017-11-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Human-Machine Interaction features 20 original chapters and a conclusion focusing on human-machine interaction (HMI) from analysis, design and evaluation perspectives. It offers a comprehensive range of principles, methods, techniques and tools to provide the reader with a clear knowledge of the current academic and industry practice and debate that define the field. The text considers physical, cognitive, social and emotional aspects and is illustrated by key application domains such as aerospace, automotive, medicine and defence. Above all, this volume is designed as a research guide that will both inform readers on the basics of human-machine interaction from academic and industrial perspectives and also provide a view ahead at the means through which human-centered designers, including engineers and human factors specialists, will attempt to design and develop human-machine systems.

Download or read book Reliability and Risk Issues in Large Scale Safety critical Digital Control Systems written by Poong-Hyun Seong and published by Springer Science & Business Media. This book was released on 2008-11-25 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Reliability and Risk Issues in Large Scale Safety-critical Digital Control Systems” provides a comprehensive coverage of reliability issues and their corresponding countermeasures in the field of large-scale digital control systems, from the hardware and software in digital systems to the human operators who supervise the overall process of large-scale systems. Unlike other books which examine theories and issues in individual fields, this book reviews important problems and countermeasures across the fields of software reliability, software verification and validation, digital systems, human factors engineering and human reliability analysis. Divided into four sections dealing with software reliability, digital system reliability, human reliability and human operators in large-scale digital systems, the book offers insights from professional researchers in each specialized field in a diverse yet unified approach.

Download or read book Nuclear Power written by Pavel Tsvetkov and published by BoD – Books on Demand. This book was released on 2010-08-17 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world of the twenty first century is an energy consuming society. Due to increasing population and living standards, each year the world requires more energy and new efficient systems for delivering it. Furthermore, the new systems must be inherently safe and environmentally benign. These realities of today's world are among the reasons that lead to serious interest in deploying nuclear power as a sustainable energy source. Today's nuclear reactors are safe and highly efficient energy systems that offer electricity and a multitude of co-generation energy products ranging from potable water to heat for industrial applications. The goal of the book is to show the current state-of-the-art in the covered technical areas as well as to demonstrate how general engineering principles and methods can be applied to nuclear power systems.

Download or read book Process Safety written by Pol Hoorelbeke and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-05-10 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author describes the history of industrial safety and the emergence of process safety as an engineering discipline in the 20th century. The book sheds light on the difference between:

Download or read book Lees Process Safety Essentials written by Sam Mannan and published by Butterworth-Heinemann. This book was released on 2013-11-12 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lees' Process Safety Essentials is a single-volume digest presenting the critical, practical content from Lees' Loss Prevention for day-to-day use and reference. It is portable, authoritative, affordable, and accessible — ideal for those on the move, students, and individuals without access to the full three volumes of Lees'. This book provides a convenient summary of the main content of Lees', primarily drawn from the hazard identification, assessment, and control content of volumes one and two. Users can access Essentials for day-to-day reference on topics including plant location and layout; human factors and human error; fire, explosion and toxic release; engineering for sustainable development; and much more. This handy volume is a valuable reference, both for students or early-career professionals who may not need the full scope of Lees', and for more experienced professionals needing quick, convenient access to information. - Boils down the essence of Lees'—the process safety encyclopedia trusted worldwide for over 30 years - Provides safety professionals with the core information they need to understand the most common safety and loss prevention challenges - Covers the latest standards and presents information, including recent incidents such as Texas City and Buncefield

Download or read book Safety and Reliability Theory and Applications written by Marko Cepin and published by CRC Press. This book was released on 2017-06-14 with total page 3668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and Reliability – Theory and Applications contains the contributions presented at the 27th European Safety and Reliability Conference (ESREL 2017, Portorož, Slovenia, June 18-22, 2017). The book covers a wide range of topics, including: • Accident and Incident modelling • Economic Analysis in Risk Management • Foundational Issues in Risk Assessment and Management • Human Factors and Human Reliability • Maintenance Modeling and Applications • Mathematical Methods in Reliability and Safety • Prognostics and System Health Management • Resilience Engineering • Risk Assessment • Risk Management • Simulation for Safety and Reliability Analysis • Structural Reliability • System Reliability, and • Uncertainty Analysis. Selected special sessions include contributions on: the Marie Skłodowska-Curie innovative training network in structural safety; risk approaches in insurance and fi nance sectors; dynamic reliability and probabilistic safety assessment; Bayesian and statistical methods, reliability data and testing; oganizational factors and safety culture; software reliability and safety; probabilistic methods applied to power systems; socio-technical-economic systems; advanced safety assessment methodologies: extended Probabilistic Safety Assessment; reliability; availability; maintainability and safety in railways: theory & practice; big data risk analysis and management, and model-based reliability and safety engineering. Safety and Reliability – Theory and Applications will be of interest to professionals and academics working in a wide range of industrial and governmental sectors including: Aeronautics and Aerospace, Automotive Engineering, Civil Engineering, Electrical and Electronic Engineering, Energy Production and Distribution, Environmental Engineering, Information Technology and Telecommunications, Critical Infrastructures, Insurance and Finance, Manufacturing, Marine Industry, Mechanical Engineering, Natural Hazards, Nuclear Engineering, Offshore Oil and Gas, Security and Protection, Transportation, and Policy Making.

Download or read book Probabilistic Safety Assessment and Management written by Cornelia Spitzer and published by Springer. This book was released on 2014-01-04 with total page 3803 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of papers presented at the PSAM 7 – ESREL ’04 conference in June 2004, reflecting a wide variety of disciplines, such as principles and theory of reliability and risk analysis, systems modelling and simulation, consequence assessment, human and organisational factors, structural reliability methods, software reliability and safety, insights and lessons from risk studies and management/decision making. This volume covers both well-established practices and open issues in these fields, identifying areas where maturity has been reached and those where more development is needed.