Download or read book Fibres Films Plastics and Rubbers written by W.J. Roff and published by Elsevier. This book was released on 2013-10-22 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibres, Films, Plastics and Rubbers: A Handbook of Common Polymers focuses on polymeric materials. The book first discusses a list of sections on individual polymers. Topics include olefin and vinyl-type, carbohydrate-type, synthetic condensation-type, organo-silicon, and inorganic polymers, as well as proteins. The text also looks at list of sections on specific properties and related information. The book then discusses polyethylenes, polypropylene, and polytetrafluoroethylene. The text also examines polystyrene. Concerns include the structure, chemistry, physics, fabrication, serviceability, and utilization of these materials. The text also focuses on indene and coumarone/indene resins; polyvinyl acetate and alcohol; polyvinyl formal, acetal, and butyral; and polyacrylates and polymethacrylates. The book then examines the structure, chemistry, physics, fabrication, serviceability, and utilization of polyvinyl chloride, polyvinylidene chloride, cellulose, and cellulose acetate. The book also discusses the structure, chemistry, physics, fabrication, serviceability, and utilization of cellulose nitrate, cellulose ethers, starch, and regenerated proteins. Same type of evaluation is also done to polyamides, epoxy resins, polyformaldehyde, natural rubber, and nitrile rubbers. The text is a valuable source of information for readers interested in polymeric materials.
Download or read book Handbook of Textile Fibre Structure written by Stephen Eichhorn and published by Elsevier. This book was released on 2009-10-19 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their complexity and diversity, understanding the structure of textile fibres is of key importance. This authoritative two-volume collection provides a comprehensive review of the structure of an extensive range of textile fibres.Volume 1 begins with an introductory set of chapters on fibre structure and methods to characterise fibres. The second part of the book covers the structure of manufactured polymer fibres such as polyester, polyamides, polyolefin, elastomeric and aramid fibres as well as high-modulus, high-tenacity polymer fibres. Chapters discuss fibre formation during processing and how this affects fibre structure and mechanical properties. A companion volume reviews natural, regenerated, inorganic and specialist fibres.Edited by leading authorities on the subject and with a team of international authors, the two volumes of the Handbook of textile fibre structure is an essential reference for textile technologists, fibre scientists, textile engineers and those in academia. - The first title of a authoritative two-volume collection that provides a comprehensive review of the structure of a range of textile fibres - Provides an overview of the development of fibre structure and methods to characterise fibres - Examines the structure of both traditional and new fibres and natural and manufactured fibres
Download or read book Coated and Laminated Textiles written by W Fung and published by Elsevier. This book was released on 2002-05-09 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coating and lamination offer methods of improving and modifying the physical properties and appearance of fabrics and also the development of entirely new products by combining the benefits of fabrics, polymers and films.This detailed book covers all aspects of coating and lamination within the textile industry including – compound ingredients, how to set and adhere to strictly controlled processing conditions, the accurate control of production variables, the safe handling of toxic materials and the ongoing research into future products which will facilitate recycling and disposal.This book is particularly useful in the insight it gives about the challenges and opportunities that these new treatments offer and is essential reading for technologists, chemists and production engineers working in this exciting field. - Authoritative review of the latest developments in coating and lamination processes for textiles - Focuses on the importance of setting and adhering to processing conditions - Written by the author of the well-known Textiles in automotive engineering
Download or read book Water Soluble Synthetic Polymers written by Philip Molyneux and published by CRC Press. This book was released on 2018-01-10 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although several monographs and reviews have appeared on individual polymers of this type, and their applications and other technical aspects have also been discussed, this is apparently the first book to deal with the physical chemistry of water-soluble synthetic polymers as a group. This collective survey enables their properties and behaviour to be compared, and to be correlated with their molecular structures for predictive purposes. However, this has made it necessary to critically re-appraise much of the earlier fundamental work, so that current discussion of more recent work can be put on ta proper basis. Thus, of the 1800 or so references cited, the middle two-thirds related to the twenty-year period centred on about 1968. Nevertheless, sufficient key recent references have also been included so that the existing ‘state of the art is delineated.
Download or read book Construction Materials Reference Book written by David Doran and published by Routledge. This book was released on 2013-07-24 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the definitive reference source for professionals involved in the conception, design and specification stages of a construction project. The theory and practical aspects of each material is covered, with an emphasis being placed on properties and appropriate use, enabling broader, deeper understanding of each material leading to greater confidence in their application. Containing fifty chapters written by subject specialists, Construction Materials Reference Book covers the wide range of materials that are encountered in the construction process, from traditional materials such as stone through masonry and steel to advanced plastics and composites. With increased significance being placed on broader environmental issues, issues of whole life cost and sustainability are covered, along with health and safety aspects of both use and installation.
Download or read book Fundamentals of Fiber Science written by Xiangwu Zhang and published by DEStech Publications, Inc. This book was released on 2014-01-13 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Connects fiber chemistry and structure to properties that can be designed and engineered Micro- and nanoscale, synthetic and natural polymer and non-polymer fibers explained with applications to industrial, electronic, biomedical and energy Information pertinent for fiber, textile, composite, polymer and materials specialists This volume provides the basic chemical and mathematical theory needed to understand and modify the connections among the structure, formation and properties of many different types of manmade and natural fibers. At a fundamental level it explains how polymeric and non-polymeric fibers are organized, how such fibers are formed, both synthetically and biologically, and how primary and secondary properties, from basic flow to thermal and electrical qualities, are derived from molecular and submolecular organization, thus establishing the quantitative and predictive relationships needed for fiber engineering. The book goes on to show how fiber chemistry and modes of processing for dozens of materials such as silks, ceramics, glass and carbon can be used to control functional optical, conductive, thermal and other properties. Its discussion ranges over microscale and nanoscale fibers (nanofibers), covering methods such as spinning and electrospinning, as well as biological fiber generation through self-assembly. Technologies in this text apply to the analysis and design of fibers for industrial, electronic, optical, medical and energy storage applications.
Download or read book Synthetic Polymers written by D. Feldman and published by Springer Science & Business Media. This book was released on 1996-05-31 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthetic Polymers is a comprehensive introduction to the technologies involved in the synthesis of the main classes of engineering high polymers used in such materials as plastics, fibers, rubbers, foams, adhesives and coatings. Besides the basic processes, this volume includes information on physical, chemical and mechanical characteristics - key factors with respect to obtaining the right end products. It also focuses on the main application of synthetic polymers in different engineering areas and gives data on production and consumption. Over 60 technological flowcharts are presented in a clear and concise manner, to provide the reader with essential information on relevant operations.
Download or read book Cellular Solids written by Lorna J. Gibson and published by Cambridge University Press. This book was released on 1999-07-22 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this new edition of their classic work on Cellular Solids, the authors have brought the book completely up to date, including new work on processing of metallic and ceramic foams and on the mechanical, electrical and acoustic properties of cellular solids. Data for commercially available foams are presented on material property charts; two new case studies show how the charts are used for selection of foams in engineering design. Over 150 references appearing in the literature since the publication of the first edition are cited. The text summarises current understanding of the structure and mechanical behaviour of cellular materials, and the ways in which they can be exploited in engineering design. Cellular solids include engineering honeycombs and foams (which can now be made from polymers, metals, ceramics and composites) as well as natural materials, such as wood, cork and cancellous bone.
Download or read book Special Report written by and published by . This book was released on 1985 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polyurethane written by Fahmina Zafar and published by BoD – Books on Demand. This book was released on 2012-08-29 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The enchanting and worthy world of PU beckoned to bring forth the book titled "Polyurethane". The book is divided into three sections: structures, properties and characterization of PU, applications of PU and a separate section on Biobased PU, covering the research and development in these areas. Each contributed chapter handles new and interesting topics introducing the reader to the wider known and unknown applications of PU such as PU for grouting technologies, fuel binder, extraction of metals, treatment of industry wastewater, alkanolamide PU coatings and foams, and others. The book aims to cater a larger audience comprising of readers from polymer chemistry, materials chemistry, and industrial chemistry.
Download or read book Textiles in Automotive Engineering written by W Fung and published by Elsevier. This book was released on 2000-11-28 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive treatment of both functional and decorative textiles used in the automotive industry including seat covers, headliners, airbags, seat belts and tyres. Written in a clear, concise style it explains material properties and the way in which they influence manufacturing processes as well as providing practical production details.The subject treatment cuts across the disciplines of textile chemistry, fabric and plastics technology and production engineering. Environmental effects and recycling are also covered. It is aimed at the design and process engineer in industry as well as researchers in universities and colleges. Quality engineers will also benefit from the book's sections on identifying problems and material limitations.
Download or read book Robinson Modern Dairy Technology written by R. Robinson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The dairy industry is, in many countries, a major contributor to the manufacturing capacity of the food sector, and as more components of milk are utilised in processed foods, so this importance is likely to grow. Already dairy operations range from the straightforward handling of liquid milk through to the production of highly sophisticated consumer items, and it is of note that all this activity is based on a raw material that is readily perishable at ambient temperatures. This competitive, commercial position, together with the fact that the general public has a high regard for dairy products, is an indication of the extent to which milk producers and processors have combined to ensure that retail prO(;lucts are both nutritious and hygienically acceptable. Achievement of these aims, and at reasonable cost, has depended in large measure on the advances that have been made in the handling of large volumes of milk. Thus, factories designed to handle millions of litres of milk per week are now commonplace, and it is the plant and equipment involved that provides the factual background for this two-volume book.
Download or read book Sustainable Food Waste Management written by Monika Thakur and published by Springer Nature. This book was released on 2021-01-04 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses one of the biggest challenges of the food industry, which is waste management. Food industries generate high amounts of waste, both solid and liquid, resulting from the production, processing and consumption of food. Stringent environmental legislators have made the task of waste management more challenging. Through the three sections of this book, the readers are introduced to the different types of wastes generated, utilization of waste through food processing industry and sustainable waste management technologies. The different chapters describe how the biomass and the valuable nutrients from food industry wastes could be used to develop value-added products. The book reiterates that food wastes and their by-products are an excellent source of sugars, minerals, dietary fiber, organic acids, bio active compounds such as polyphenols, carotenoids and phytochemicals etc. This book is an excellent resource for industry experts, researchers and students in the field of food science, food processing and food waste management.
Download or read book Computational Modelling and Advanced Simulations written by Justín Murín and published by Springer Science & Business Media. This book was released on 2010-12-25 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected, extended papers presented at the thematic ECCOMAS conference on Computational Modelling and Advanced Simulations (CMAS2009) held in Bratislava, Slovakia, June 30 – July 3, 2009. Modelling and simulation of engineering problems play a very important role in the classic and new composite material sciences, and in design and computational prototyping of modern and advanced technologic parts and systems. According to this, the existing numerical methods have been improved and new numerical methods have been established for modelling and simulation of more and more complex and complicated engineering problems. The present book should contribute to the effort to make modelling and simulation more effective and accurate.
Download or read book Walford s Guide to Reference Material Science technology written by Albert John Walford and published by London : Library Association. This book was released on 1980 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Library of Congress Catalog written by Library of Congress and published by . This book was released on 1970 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: A cumulative list of works represented by Library of Congress printed cards.
Download or read book Library of Congress Catalogs written by Library of Congress and published by . This book was released on 1976 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
