Download or read book Handbook Factory Planning and Design written by Hans-Peter Wiendahl and published by Springer. This book was released on 2015-04-20 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook introduces a methodical approach and pragmatic concept for the planning and design of changeable factories that act in strategic alliances to supply the ever-changing needs of the global market. In the first part, the change drivers of manufacturing enterprises and the resulting new challenges are considered in detail with focus on an appropriate change potential. The second part concerns the design of the production facilities and systems on the factory levels work place, section, building and site under functional, organisational, architectural and strategic aspects keeping in mind the environmental, health and safety aspects including corporate social responsibility. The third part is dedicated to the planning and design method that is based on a synergetic interaction of process and space. The accompanying project management of the planning and construction phase and the facility management for the effective utilization of the built premises close the book. The Authors Prof. em. Dr.-Ing. Dr. mult. h.c. Hans-Peter Wiendahl has been director for 23 years of the Institute of Factory planning and Logistics at the Leibniz University of Hannover in Germany. Prof. Dipl.-Ing. Architekt BDA Jürgen Reichardt is Professor at the Muenster school of architecture and partner of RMA Reichardt – Maas – Associate Architects in Essen Germany. Prof. Dr.-Ing. habil. Peter Nyhuis is Managing Director of the Institute of Factory Planning and Logistics at the Leibniz University of Hannover in Germany.
Download or read book Factory Planning Manual written by Michael Schenk and published by Springer Science & Business Media. This book was released on 2009-10-29 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: The central purpose of this book is to impart knowledge, skills and practical - plementation methods for the planning and operation of adaptable production - cilities and factories. It addresses planning methods and procedures for various types of production facility up to and including entire factories, and is aimed at practicing factory planners and students alike. The book provides facts and demonstrates practical processes using case studies for the purposes of illustration, so that ultimately skills can be acquired that make independent practical implementation and app- cation possible. It is based on up-to-the-minute practical experience and univ- sally applicable knowledge of the planning and technological design of adaptable production facilities (manufacturing and assembly) and factories. In comparison to existing, thematically-similar reference books, what is in- vative about this manual is that it provides the impulse for a more flexible pl- ning approach for the efficient design of adaptable production facilities using - sponsive, unconventional planning and organizational solutions. The book aims to provide a way of integrating systematic and situation-driven planning methods in a meaningful way. Situation-driven planning is becoming increasingly important to production facilities in these fast-moving times of change, in particular in terms of resource and energy efficiency. Existing technical and organizational course of action in terms of resources (both human and technical) need to be selected for the specific case at hand, and changes (to workshops, products, processes and equ- ment) need to be managed.
Download or read book Manufacturing Plant Layout written by Edward John Phillips and published by . This book was released on 1997 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: A step-by-step guide to planning new factories and plant rearrangements, this book describes proven analytical methods for: Calculating space requirements, Activity-pair relationships, Materials handling analysis, Generating alternative layout. This proven strategy masterfully weaves together the very best elements of layout methods for manufacturing cells, JIT, demand-flow and constraint-based flow manufacturing philosophies, in addition to traditional job shop and assembly line operations. Learn how to methodically reduce or totally rid a design of profit eroders during the plan/design of a cost efficient manufacturing layout.
Download or read book Product Design and Factory Development written by Richard Crowson and published by CRC Press. This book was released on 2006 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the latest trends and technologies that have developed over the last decade since the first, successful edition of this handbook was published, the Handbook of Manufacturing Engineering, Second Edition has expanded into four volumes. Each volume stands well on its own and combined, they provide the most comprehensive and thorough coverage available. They may be purchased individually, for the specialist in need of a focused treatment, or as a set at a substantially reduced priced and enclosed in an attractive slipcase. The volumes collectively cover product design and factory development, factory operations, including planning, parts fabrication, and automated and manual assembly processes. (Midwest).
Download or read book MANUFACTURING PLANNING AND CONTROL SYSTEMS FOR SUPPLY CHAIN MANAGEMENT written by Thomas E. Vollmann and published by McGraw Hill Professional. This book was released on 2004-08-20 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Planning and Control Systems for Supply Chain Management is both the classic field handbook for manufacturing professionals in virtually any industry and the standard preparatory text for APICS certification courses. This essential reference has been totally revised and updated to give professionals the knowledge they need.
Download or read book Fundamentals of Game Development written by Heather Chandler and published by Jones & Bartlett Learning. This book was released on 2011-08-24 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is a game? -- The game industry -- Roles on the team -- Teams -- Effective communication -- Game production overview -- Game concept -- Characters, setting, and story -- Game requirements -- Game plan -- Production cycle -- Voiceover and music -- Localization -- Testing and code releasing -- Marketing and public relations.
Download or read book Handbook of Food Factory Design written by Christopher G. J. Baker and published by Springer Science & Business Media. This book was released on 2013-08-27 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food manufacturing has evolved over the centuries from kitchen industries to modern, sophisticated production operations. A typical food factory includes the food processing and packaging lines, the buildings and exterior landscaping, and the utility-supply and waste-treatment facilities. As a single individual is unlikely to possess all the necessary skills required to facilitate the design, the task will undoubtedly be undertaken by an interdisciplinary team employing a holistic approach based on a knowledge of the natural and biological sciences, most engineering disciplines, and relevant legislation. In addition, every successful project requires a competent project manager to ensure that all tasks are completed on time and within budget. This Handbook attempts to compress comprehensive, up-to-date coverage of these areas into a single volume. It is hoped that it will prove to be of value across the food-manufacturing community. The multi-disciplinary nature of the subject matter should facilitate more informed communication between individual specialists on the team. It should also provide useful background information on food factory design for a wider range of professionals with a more peripheral interest in the subject: for example, process plant suppliers, contractors, HSE specialists, retailers, consultants, and financial institutions. Finally, it is hoped that it will also prove to be a valuable reference for students and instructors in the areas of food technology, chemical engineering, and mechanical engineering, in particular.
Download or read book Data Center Handbook written by Hwaiyu Geng and published by John Wiley & Sons. This book was released on 2014-12-01 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the fundamentals, technologies, and best practices in designing, constructing and managing mission critical, energy efficient data centers Organizations in need of high-speed connectivity and nonstop systems operations depend upon data centers for a range of deployment solutions. A data center is a facility used to house computer systems and associated components, such as telecommunications and storage systems. It generally includes multiple power sources, redundant data communications connections, environmental controls (e.g., air conditioning, fire suppression) and security devices. With contributions from an international list of experts, The Data Center Handbook instructs readers to: Prepare strategic plan that includes location plan, site selection, roadmap and capacity planning Design and build "green" data centers, with mission critical and energy-efficient infrastructure Apply best practices to reduce energy consumption and carbon emissions Apply IT technologies such as cloud and virtualization Manage data centers in order to sustain operations with minimum costs Prepare and practice disaster reovery and business continuity plan The book imparts essential knowledge needed to implement data center design and construction, apply IT technologies, and continually improve data center operations.
Download or read book Planning Production and Inventories in the Extended Enterprise written by Karl G. Kempf and published by Springer Science & Business Media. This book was released on 2011-01-12 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: In two volumes, Planning Production and Inventories in the Extended Enterprise: A State of the Art Handbook examines production planning across the extended enterprise against a backdrop of important gaps between theory and practice. The early chapters describe the multifaceted nature of production planning problems and reveal many of the core complexities. The middle chapters describe recent research on theoretical techniques to manage these complexities. Accounts of production planning system currently in use in various industries are included in the later chapters. Throughout the two volumes there are suggestions on promising directions for future work focused on closing the gaps.
Download or read book Facilities Design written by Sunderesh S. Heragu and published by CRC Press. This book was released on 2018-10-08 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in Its Fourth Edition: Your Guide to Successful Facility Design Overcome design and planning problems using the fourth edition of Facilities Design. Dedicated to the proper design, layout, and location of facilities, this definitive guide outlines the main design and operational problems that occur in manufacturing and service systems, explains the significance of facility design and planning problems, and describes how mathematical models can be used to help analyze and solve them. Combining theory with practice, this revised work presents state-of-the-art topics in materials handling, warehousing, and logistics along with real-world examples that emphasize the importance of modeling and analysis when determining a solution to complex facility design problems. What’s New in the Fourth Edition: The latest version introduces new material that includes handling equipment and systems, and presents relevant case studies in each and every chapter. It also provides access to Layout-iQ software, data files for many of the numerical examples that are contained throughout the book, and PowerPoint files for various chapters. Additionally, the author: Describes tools commonly used for presenting layout designs Presents traditional models for facility layout including the popular systematic layout planning (SLP) model in detail Provides a layout project involving the SLP model Covers group technology and cellular manufacturing at the elementary level Includes a project and case study on machine grouping and layout Considers next-generation factory layouts Discusses analytical queuing and queuing network models, and more Facilities Design, Fourth Edition explains the ins and outs of facility planning and design. A reference for both student and professional, the book addresses facilities design and layout problems in manufacturing systems and covers layout, logistics, supply chain, warehousing, and materials handling. Please visit the author’s website for ancillary materials: http://sundere.okstate.edu/downloadable-software-programs-and-data-files.
Download or read book Factory Operations written by Richard Crowson and published by CRC Press. This book was released on 2005-12-21 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume two of the second edition of the comprehensive Handbook of Manufacturing Engineering illuminates the role of the manufacturing engineer as the key component of factory operation. The focus is on the planning and instruction duties that are critical to successful operations management, which fall upon the manufacturing engineer who may be unf
Download or read book Manufacturing Engineering Handbook written by Hwaiyu Geng and published by McGraw Hill Professional. This book was released on 2004-07-13 with total page 1193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Let our teams of experts help you to stay competitive in a global marketplace. It is every company's goal to build the highest quality goods at the lowest price in the shortest time possible. With the Manufacturing Engineering Handbook you'll have access to information on conventional and modern manufacturing processes and operations management that you didn't have before. For example, if you are a manufacturing engineer responding to a request for proposal (RFP), you will find everything you need for estimating manufacturing cost, labor cost and overall production cost by turning to chapter 2, section 2.5, the manufacturing estimating section. The handbook will even outline the various manufacturing processes for you. If you are a plant engineer working in an automotive factory and find yourself in the hot working portion of the plant, you should look up section 6 on hot work and forging processing. You will find it very useful for learning the machines and processes to get the job done. Likewise, if you are a Design Engineer and need information regarding hydraulics, generators & transformers, turn to chapter 3, section 3.2.3, and you’ll find generators & transformers. Covering topics from engineering mathematics to warehouse management systems, Manufacturing Engineering Handbook is the most comprehensive single-source guide to Manufacturing Engineering ever published.
Download or read book Design of Clothing Manufacturing Processes written by Jelka Geršak and published by Elsevier. This book was released on 2013-07-31 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: The era of mass manufacturing of clothing and other textile products is coming to an end; what is emerging is a post-industrial production system that is able to achieve the goal of mass-customised, low volume production, where the conventional borders between product design, production and user are beginning to merge. To continue developing knowledge on how to design better products and services, we need to design better clothing manufacturing processes grounded in science, technology, and management to help the clothing industry to compete more effectively. Design of clothing manufacturing processes reviews key issues in the design of more rapid, integrated and flexible clothing manufacturing processes.The eight chapters of the book provide a detailed coverage of the design of clothing manufacturing processes using a systematic approach to planning, scheduling and control. The book starts with an overview of standardised clothing classification systems and terminologies for individual clothing types. Chapter 2 explores the development of standardised sizing systems. Chapter 3 reviews the key issues in the development of a garment collection. Chapters 4 to 7 discuss particular aspects of clothing production, ranging from planning and organization to monitoring and control. Finally, chapter 8 provides an overview of common quality requirements for clothing textile materials.Design of clothing manufacturing processes is intended for R&D managers, researchers, technologists and designers throughout the clothing industry, as well as academic researchers in the field of clothing design, engineering and other aspects of clothing production. Considers in detail the design of sizing and classification systems Discusses the planning required in all aspects of clothing production from design and pattern making to manufacture Overviews the management of clothing production and material quality requirements
Download or read book Site Planning and Design Handbook 2e Pb written by Thomas Russ and published by McGraw-Hill Companies. This book was released on 2023-03-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. Essential site planning and design strategies, up-to-date with the latest sustainable development techniques Discover how to incorporate sound environmental considerations into traditional site design processes. Written by a licensed landscape architect with more than 20 years of professional experience, this authoritative guide combines established approaches to site planning with sustainable practices and increased environmental sensitivity. Fully revised and updated, Site Planning and Design Handbook, Second Edition discusses the latest standards and protocols-including LEED. The book features expanded coverage of green site design topics such as water conservation, energy efficiency, green building materials, site infrastructure, and brownfield restoration. This comprehensive resource addresses the challenges associated with site planning and design and lays the groundwork for success. Site Planning and Design Handbook, Second Edition explains how to: Integrate sustainability into site design Gather site data and perform site analysis Meet community standards and expectations Plan for pedestrians, traffic, parking, and open space Use grading techniques to minimize erosion and maximize site stability Implement low-impact stormwater management and sewage disposal methods Manage brownfield redevelopment Apply landscape ecology principles to site design Preserve historic landscapes and effectively utilize vegetation
Download or read book Factory Planning and Plant Layout written by W.Grant Ireson and published by . This book was released on 1956 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Community Planning Handbook written by Nick Wates and published by Routledge. This book was released on 2010-09-23 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Growing numbers of residents are getting involved with professionals in shaping their local environment, and there is now a powerful range of methods available, from design workshops to electronic maps. The Community Planning Handbook is the essential starting point for all those involved - planners and local authorities, architects and other practitioners, community workers, students and local residents. It features an accessible how-to-do-it style, best practice information on effective methods, and international scope and relevance. Tips, checklists and sample documents help readers to get started quickly, learn from others' experience and to select the approach best suited to their situation. The glossary, bibliography and contact details provide quick access to further information and support.
Download or read book Pharmaceutical Manufacturing Handbook written by Shayne Cox Gad and published by John Wiley & Sons. This book was released on 2008-03-21 with total page 1384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook features contributions from a team of expert authors representing the many disciplines within science, engineering, and technology that are involved in pharmaceutical manufacturing. They provide the information and tools you need to design, implement, operate, and troubleshoot a pharmaceutical manufacturing system. The editor, with more than thirty years' experience working with pharmaceutical and biotechnology companies, carefully reviewed all the chapters to ensure that each one is thorough, accurate, and clear.
