Download or read book Half metallic Alloys written by Iosif Galanakis and published by Springer. This book was released on 2010-02-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Half-metals are particular ferromagnetic materials which can be considered as hybrids between metals and semiconductors. A particular feature of these materials is that electrons at the Fermi level show complete spin polarization making them prime targets for research into suitable divices for spin electronics. This book is both an introduction and state-of-art survey of the latest advances in the understanding and applications of Heusler alloys and related compounds.
Download or read book Half metallic Materials and Their Properties written by C. Y. Fong and published by World Scientific. This book was released on 2013 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a detailed treatment of half-metallic materials and their properties from both an experimental and theoretical point of view. It discusses the methods used to understand and predict the properties of half-metals and the gamut of other materials amenable to these techniques. It also offers an expansive bibliography to facilitate further and deeper research. This book provides the precise definitions of all key terminology used in the vast and varied literature.This is the first comprehensive monograph on the subject and will serve as a starting point for graduate students and senior researchers who wish to enter the field. This book will also be an invaluable reference to those already working in the areaof half-metallic materials.
Download or read book Half metallic Alloys written by Iosif Galanakis and published by . This book was released on 2005-09-20 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Half-metals are particular ferromagnetic materials which can be considered as hybrids between metals and semiconductors. A particular feature of these materials is that electrons at the Fermi level show complete spin polarization making them prime targets for research into suitable divices for spin electronics. This book is both an introduction and state-of-art survey of the latest advances in the understanding and applications of Heusler alloys and related compounds.
Download or read book Heusler Alloys written by Claudia Felser and published by Springer. This book was released on 2015-11-12 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an overview of the physics of Heusler compounds ranging from fundamental properties of these alloys to their applications. Especially Heusler compounds as half-metallic ferromagnetic and topological insulators are important in condensed matter science due to their potential in magnetism and as materials for energy conversion. The book is written by world-leaders in this field. It offers an ideal reference to researchers at any level.
Download or read book Spintronics written by Claudia Felser and published by Springer Science & Business Media. This book was released on 2013-03-20 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spintronics is an emerging technology exploiting the spin degree of freedom and has proved to be very promising for new types of fast electronic devices. Amongst the anticipated advantages of spintronics technologies, researchers have identified the non-volatile storage of data with high density and low energy consumption as particularly relevant. This monograph examines the concept of half-metallic compounds perspectives to obtain novel solutions and discusses several oxides such as perovskites, double perovskites and CrO2 as well as Heusler compounds. Such materials can be designed and made with high spin polarization and, especially in the case of Heusler compounds, many material-related problems present in current-day 3d metal systems, can be overcome. Spintronics: From Materials to Devices provides an insight into the current research on Heusler compounds and offers a general understanding of structure–property relationships, including the influence of disorder and correlations on the electronic structure and interfaces. Spintronics devices such as magnetic tunnel junctions (MTJs) and giant magnetoresistance (GMR) devices, with current perpendicular to the plane, in which Co2 based Heusler compounds are used as new electrode materials, are also introduced. From materials design by theoretical methods and the preparation and properties of the materials to the production of thin films and devices, this monograph represents a valuable guide to both novices and experts in the fields of Chemistry, Physics, and Materials Science.
Download or read book Heusler Alloys written by Julia Coleman and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ternary Mn-based Heusler alloys often exhibit a ferromagnetic shape memory effect,which is best studied in Ni2MnGa, a prototype of Heusler alloys. Heusler Alloys: Structure, Properties and Applications opens by analyzing how by substituting nickel for iron, another Heusler alloy emerges, Fe2MnGa, with much richer structural and magnetic properties than Ni2MnGa and a large ferromagnetic shape memory performance in slightly off-stoichiometric compositions.Next, the effects of atomic site disorder on the transport, magnetic, optical, and magneto-optical properties and electronic structures of metallic Cu2MnAl, Ni2MnGa and Ni2MnIn and half-metallic Co2CrAl, Co2MnGa and Co2CrGa Heusler alloy films are been investigated and the findings are discussed.The concluding study presents first-order reversal curve diagrams of the full-Heusler alloy nanoparticles synthesized by co-precipitation method, followed by thermal annealing at 700 °C under Ar/H2 atmosphere. Interacting single domain particles were dominantly detected from analysis.
Download or read book Mechanisms of Diffusional Phase Transformations in Metals and Alloys written by Hubert I. Aaronson and published by CRC Press. This book was released on 2016-04-19 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed by the late metallurgy professor and master experimentalist Hubert I. Aaronson, this collection of lecture notes details the fundamental principles of phase transformations in metals and alloys upon which steel and other metals industries are based. Mechanisms of Diffusional Phase Transformations in Metals and Alloys is devoted to solid-s
Download or read book Magnetic Properties of Heusler Alloys written by Edward Beattie Stephenson and published by . This book was released on 1910 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Properties And Applications Of Complex Intermetallics written by Esther Belin-ferre and published by World Scientific. This book was released on 2009-08-11 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex metal alloys (CMAs) comprise a huge group of largely unknown alloys and compounds, where many phases are formed with crystal structures based on giant unit cells containing atom clusters, ranging from tens of to more than thousand atoms per unit cell. In these phases, for many phenomena, the physical length scales are substantially smaller than the unit-cell dimension. Hence, these materials offer unique combinations of properties which are mutually exclusive in conventional materials, such as metallic electric conductivity combined with low thermal conductivity, good light absorption with high-temperature stability, high metallic hardness with reduced wetting by liquids, etc.This book is the second of a series of books issued yearly as a deliverable to the European Community of the School established within the European Network of Excellence CMA. Written by reputed experts in the fields of metal physics, surface physics, surface chemistry, metallurgy, and process engineering, this book brings together expertise found inside as well as outside the network to provide a comprehensive overview of the current state of knowledge in CMAs.
Download or read book Complex Metallic Alloys written by Jean-Marie Dubois and published by John Wiley & Sons. This book was released on 2010-12-13 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering fundamental research as well as real-world applications, this first book on CMAs at an introductory level treats everything from atomistic details to surface processing. Comprehensive, self-contained chapters provide readers with the latest knowledge on the most salient features of the topic, selected in terms of their relevance to potential technological applications. Edited by one of the most distinguished authorities on quasicrystals and this most important of their subclasses, the contributions elucidate aspects of CMAs from a particular viewpoint: physical and chemical characteristics in the sub-nanometer regime, mesoscale phenomena, preparation and processing of thin films, and large-scale engineering properties. The whole is rounded off by a look at the commercial potential of CMA-based applications. For PhD students and lecturers alike.
Download or read book Alloys and Intermetallic Compounds written by Cristina Artini and published by CRC Press. This book was released on 2017-07-12 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the role of modeling in the design of alloys and intermetallic compounds. It includes an introduction to the most important and most used modeling techniques, such as CALPHAD and ab-initio methods, as well as a section devoted to the latest developments in applications of alloys. The book emphasizes the correlation between modeling and technological developments while discussing topics such as wettability of Ultra High Temperature Ceramics by metals, active brazing of diamonds to metals in cutting tools, surface issues in medicine, novel Fe-based superconductors, metallic glasses, high entropy alloys, and thermoelectric materials.
Download or read book Metallography and Microstructure in Ancient and Historic Metals written by David A. Scott and published by Getty Publications. This book was released on 1992-01-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.
Download or read book Mechanical Properties of Metals written by C. W. Lung and published by World Scientific. This book was released on 1999 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is intended to describe the basic and newly developed elements of the physics of solids and materials science on mechanical properties of metals with as much continuity as is possible. Particular emphasis has been placed in atomistic and fractal approaches and continuum theory of dislocations is also introduced. Since the book is meant for the two main topics of progress in recent years, some interesting and important topics which have not been discussed or introduced are given in detail.For a long time, pair potentials were used very expensively in simulation studies. They can reproduce usefully total energies for many systems. But when one turns to elastic properties, fracture of surfaces, and the vacancy formation energy, deficiencies and limitations begin to emerge. These limitations of the simple pair potential approximation have been addressed by the development of empirical many-body potentials which is the major theme of our book.Over a decade or more, diverse scientists have recognized that many of the structures common in their experiments have a special kind of geometrical complexity. The key to this progress is the recognition that many random structures obey a symmetry that objects look the same on many different scales of observation. The concept of fractals was introduced by Mandelbrot and applied to fractures by himself and collaborators. Their work pointed to a correlation between toughness and the fractal dimension. Our interest is the fractal aspects of fractured surfaces. We will discuss more in our book.The strain field of a dislocation has a long range part and this part can be discussed rigorously from elasticity theory. Recent progress in elastic strain fields and dislocation mobility were made by Indenbom and Lothe. The elementary essentials will be introduced in our book.
Download or read book Handbook of Spintronics written by Yongbing Xu and published by Springer. This book was released on 2015-10-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over two volumes and 1500 pages, the Handbook of Spintronics will cover all aspects of spintronics science and technology, including fundamental physics, materials properties and processing, established and emerging device technology and applications. Comprising 60 chapters from a large international team of leading researchers across academia and industry, the Handbook provides readers with an up-to-date and comprehensive review of this dynamic field of research. The opening chapters focus on the fundamental physical principles of spintronics in metals and semiconductors, including an introduction to spin quantum computing. Materials systems are then considered, with sections on metallic thin films and multilayers, magnetic tunnelling structures, hybrids, magnetic semiconductors and molecular spintronic materials. A separate section reviews the various characterisation methods appropriate to spintronics materials, including STM, spin-polarised photoemission, x-ray diffraction techniques and spin-polarised SEM. The third part of the Handbook contains chapters on the state of the art in device technology and applications, including spin valves, GMR and MTJ devices, MRAM technology, spin transistors and spin logic devices, spin torque devices, spin pumping and spin dynamics and other topics such as spin caloritronics. Each chapter considers the challenges faced by researchers in that area and contains some indications of the direction that future work in the field is likely to take. This reference work will be an essential and long-standing resource for the spintronics community.
Download or read book Functional Metal Oxides written by Satishchandra Balkrishna Ogale and published by John Wiley & Sons. This book was released on 2013-11-08 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functional oxides are used both as insulators and metallic conductors in key applications across all industrial sectors. This makes them attractive candidates in modern technology ? they make solar cells cheaper, computers more efficient and medical instrumentation more sensitive. Based on recent research, experts in the field describe novel materials, their properties and applications for energy systems, semiconductors, electronics, catalysts and thin films. This monograph is divided into 6 parts which allows the reader to find their topic of interest quickly and efficiently. * Magnetic Oxides * Dopants, Defects and Ferromagnetism in Metal Oxides * Ferroelectrics * Multiferroics * Interfaces and Magnetism * Devices and Applications This book is a valuable asset to materials scientists, solid state chemists, solid state physicists, as well as engineers in the electric and automotive industries.
Download or read book Alloys and Compounds of d Elements with Main Group Elements written by and published by Springer. This book was released on 2001-07-24 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 32 of Group III is a supplement to volume III/19 and deals with the magnetic properties of metals, alloys and metallic compounds which contain at least one transition element. The present subvolume III/32C provides comprehensive and evaluated data on magnetic properties of alloys and compounds of d-elements with main group elements published mainly in the previous decade.
Download or read book Thixoforming written by Gerhard Hirt and published by John Wiley & Sons. This book was released on 2009-02-11 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a sound technological overview, while also including the fundamental aspects, this book provides the knowledge needed to master the highly challenging process characteristics for successful application in industrial production. It summarizes the first-hand experience gained from twelve years of collaborative research covering materials science, rheology, casting and forming, control and surface technology as well as the modeling of flow behavior, tool engineering and systems engineering, and thus treats all the vital aspects of this field. For materials scientists, physicists, engineers, and those working in the metal processing industry.
