Download or read book IIW Guidelines on Weld Quality in Relationship to Fatigue Strength written by Bertil Jonsson and published by Springer. This book was released on 2016-04-13 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents guidelines on quantitative and qualitative measures of the geometric features and imperfections of welds to ensure that it meets the fatigue strength requirements laid out in the recommendations of the IIW (International Institute of Welding). Welds that satisfy these quality criteria can be assessed in accordance with existing IIW recommendations based on nominal stress, structural stress, notch stress or linear fracture mechanics. Further, the book defines more restrictive acceptance criteria based on weld geometry features and imperfections with increased fatigue strength. Fatigue strength for these welds is defined as S-N curves expressed in terms of nominal applied stress or hot spot stress. Where appropriate, reference is made to existing quality systems for welds.In addition to the acceptance criteria and fatigue assessment curves, the book also provides guidance on their inspection and quality control. The successful implementation of these methods depends on adequate training for operators and inspectors alike. As such, the publication of the present IIW Recommendations is intended to encourage the production of appropriate training aids and guidelines for educating, training and certifying operators and inspectors.
Download or read book IIW Recommendations On Methods for Improving the Fatigue Strength of Welded Joints written by P J Haagensen and published by Woodhead Publishing. This book was released on 2013-01-25 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: The weld toe is a primary source of fatigue cracking because of the severity of the stress concentration it produces. Weld toe improvement can increase the fatigue strength of new structures significantly. It can also be used to repair or upgrade existing structures. However, in practice there have been wide variations in the actual improvements in fatigue strength achieved. Based on an extensive testing programme organised by the IIW, this report reviews the main methods for weld toe improvement to increase fatigue strength: burr grinding, TIG dressing and hammer and needle peening. The report provides specifications for the practical use of each method, including equipment, weld preparation and operation. It also offers guidance on inspection, quality control and training as well as assessments of fatigue strength and thickness effects possible with each technique. IIW recommendations on methods for improving the fatigue strength of welded joints will allow a more consistent use of these methods and more predictable increases in fatigue strength. Provides specifications for the practical use of each weld toe method, including equipment, weld preparation and operation Offers guidance on inspection, quality control and training, as well as assessments of fatigue strength and thickness effects possible with each technique This report will allow a more consistent use of these methods and more predictable increases in fatigue strength
Download or read book IIW Recommendations for the HFMI Treatment written by Gary B. Marquis and published by Springer. This book was released on 2016-09-29 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book of recommendations presents an overview of High Frequency Mechanical Impact (HFMI) techniques existing today in the market and their proper procedures, quality assurance measures and documentation. Due to differences in HFMI tools and the wide variety of potential applications, certain details of proper treatments and quantitative quality control measures are presented generally. An example of procedure specification as a quality assurance measure is given in the Appendix. Moreover, the book presents procedures for the fatigue life assessment of HFMI-improved welded joints based on nominal stress, structural hot spot stress and effective notch stress. It also considers the extra benefit that has been experimentally observed for HFMI-treated high-strength steels. The recommendations offer proposals on the effect of loading conditions like high mean stress fatigue cycles, variable amplitude loading and large amplitude/low cycle fatigue cycles. Special considerations for low stress concentration welded joints are also given. In order to demonstrate the use of the guideline, the book provides several fatigue assessment examples.
Download or read book Recommendations for Fatigue Design of Welded Joints and Components written by A. F. Hobbacher and published by Springer. This book was released on 2015-12-23 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a basis for the design and analysis of welded components that are subjected to fluctuating forces, to avoid failure by fatigue. It is also a valuable resource for those on boards or commissions who are establishing fatigue design codes. For maximum benefit, readers should already have a working knowledge of the basics of fatigue and fracture mechanics. The purpose of designing a structure taking into consideration the limit state for fatigue damage is to ensure that the performance is satisfactory during the design life and that the survival probability is acceptable. The latter is achieved by the use of appropriate partial safety factors. This document has been prepared as the result of an initiative by Commissions XIII and XV of the International Institute of Welding (IIW).
Download or read book Fatigue Design ESIS 16 written by J. Solin and published by Wiley-Blackwell. This book was released on 1993-03-02 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of research in fatigue design, prediction, and assessment Fatigue Design is a collection of research presented at the 1993 International Symposium on Fatigue Design. Detailing the latest findings and most current research, this book features papers on a variety of pertinent topics, including the quantification of service load for fatigue life predictions, identification of stress states and failure modes, assessment of residual life in damaged components, and more. Special attention is paid to the need for simple and reliable prediction tools to help better ensure adequate strength at the design stage.
Download or read book Fatigue Life Analyses of Welded Structures written by Tom Lassen and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Avoiding or controlling fatigue damage is a major issue in the design and inspection of welded structures subjected to dynamic loading. Life predictions are usually used for safe life analysis, i.e. for verifying that it is very unlikely that fatigue damage will occur during the target service life of a structure. Damage tolerance analysis is used for predicting the behavior of a fatigue crack and for planning of in-service scheduled inspections. It should be a high probability that any cracks appearing are detected and repaired before they become critical. In both safe life analysis and the damage tolerance analysis there may be large uncertainties involved that have to be treated in a logical and consistent manner by stochastic modeling. This book focuses on fatigue life predictions and damage tolerance analysis of welded joints and is divided into three parts. The first part outlines the common practice used for safe life and damage tolerance analysis with reference to rules and regulations. The second part emphasises stochastic modeling and decision-making under uncertainty, while the final part is devoted to recent advances within fatigue research on welded joints. Industrial examples that are included are mainly dealing with offshore steel structures. Spreadsheets which accompany the book give the reader the possibility for hands-on experience of fatigue life predictions, crack growth analysis and inspection planning. As such, these different areas will be of use to engineers and researchers.
Download or read book IIW Recommendations for the Fatigue Assessment of Welded Structures By Notch Stress Analysis written by W Fricke and published by Woodhead Publishing. This book was released on 2012-10-22 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: The notch stress approach for fatigue assessment of welded joints is based on the highest elastic stress at the weld toe or root. In order to avoid arbitrary or infinite stress results, a rounded shape with a reference radius instead of the actual sharp toe or root is usually assumed. IIW recommendations for the fatigue assessment of welded structures by notch stress analysis reviews different proposals for reference radii together with associated S-N curves. Detailed recommendations are given for the numerical analysis of notch stress by the finite or boundary element method. Several aspects are discussed, such as the structural weakening by keyhole-shaped notches and the consideration of multiaxial stress states. Appropriate S-N curves are presented for the assessment of the fatigue strength of different materials. Finally, four examples illustrate the application of the approach as well as the variety of structures which can be analysed and the range of results that can be obtained from different models. Provides detailed recommendations for the number analysis of notch stress by the finite or boundary element method Discusses structural weakening by keyhole-shaped notches and the consideration of multiaxial stress states Provides four comprehensive examples, illustrating the variety of structures which can be analysed and the range of results that can be obtained from different models
Download or read book Proceedings of 1st International Conference on Structural Damage Modelling and Assessment written by Magd Abdel Wahab and published by Springer Nature. This book was released on 2020-12-12 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of Structural Damage Modelling and Assessment (SDMA 2020) presented online on 4–5 August 2020. It discusses the recent advances in fields related to damage modelling, damage detection and assessment, non-destructive testing and evaluation, structure integrity and structural health monitoring. The conference covers all research topics and applications relevant to structural damage modelling and assessment using theoretical, numerical and experimental techniques. This book is useful to scientists and engineers in academia and industry who are interested in the field of structural damage and integrity.
Download or read book Structural Hot Spot Stress Approach to Fatigue Analysis of Welded Components written by Erkki Niemi and published by Springer. This book was released on 2017-08-28 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides background and guidance on the use of the structural hot-spot stress approach to fatigue analysis. The book also offers Design S-N curves for use with the structural hot-spot stress for a range of weld details, and presents parametric formulas for calculating stress increases due to misalignment and structural discontinuities. Highlighting the extension to structures fabricated from plates and non-tubular sections. The structural hot-spot stress approach focuses on cases of potential fatigue cracking from the weld toe and it has been in use for many years in tubular joints. Following an explanation of the structural hot-spot stress, its definition and its relevance to fatigue, the book describes methods for its determination. It considers stress determination from both finite element analysis and strain gauge measurements, and emphasizes the use of finite element stress analysis, providing guidance on the choice of element type and size for use with either solid or shell elements. Lastly, it illustrates the use of the recommendations in four case studies involving the fatigue assessment of welded structures using the structural hot-spot stress
Download or read book Fracture and Fatigue of Welded Joints and Structures written by K Macdonald and published by Elsevier. This book was released on 2011-04-19 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The failure of any welded joint is at best inconvenient and at worst can lead to catastrophic accidents. Fracture and fatigue of welded joints and structures analyses the processes and causes of fracture and fatigue, focusing on how the failure of welded joints and structures can be predicted and minimised in the design process.Part one concentrates on analysing fracture of welded joints and structures, with chapters on constraint-based fracture mechanics for predicting joint failure, fracture assessment methods and the use of fracture mechanics in the fatigue analysis of welded joints. In part two, the emphasis shifts to fatigue, and chapters focus on a variety of aspects of fatigue analysis including assessment of local stresses in welded joints, fatigue design rules for welded structures, k-nodes for offshore structures and modelling residual stresses in predicting the service life of structures.With its distinguished editor and international team of contributors, Fracture and fatigue of welded joints and structures is an essential reference for mechanical, structural and welding engineers, as well as those in the academic sector with a research interest in the field. - Analyses the processes and causes of fracture and fatigue, focusing predicting and minimising the failure of welded joints in the design process - Assesses the fracture of welded joints and structure featuring constraint-based fracture mechanics for predicting joint failure - Explores specific considerations in fatigue analysis including the assessment of local stresses in welded joints and fatigue design rules for welded structures
Download or read book Ships and Offshore Structures XIX written by Carlos Guedes Soares and published by CRC Press. This book was released on 2015-09-03 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume work presents the proceedings from the 19th International Ship and Offshore Structures Congress held in Cascais, Portugal on 7th to 10th September 2015. The International Ship and Offshore Structures Congress (ISSC) is a forum for the exchange of information by experts undertaking and applying marine structural research.The aim of
Download or read book Design of Machine Elements written by Mr. V. Venkatrami Reddy and published by RK Publication. This book was released on 2024-08-16 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Machine Elements is focused on the principles and applications of designing various mechanical components essential to machine construction. This fundamental concepts of stress analysis, material selection, and safety factors, with chapters dedicated to specific elements such as shafts, bearings, gears, springs, and fasteners. It integrates theoretical insights with practical design examples, ensuring students and engineers understand both analytical and computational methods for safe and efficient designs. Ideal for engineering students and professionals, it provides tools to navigate complex mechanical design challenges across industries.
Download or read book Marine Structural Design written by Yong Bai and published by Elsevier. This book was released on 2003-08-05 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new reference describes the applications of modern structural engineering to marine structures. It will provide an invaluable resource to practicing marine and offshore engineers working in oil and gas as well as those studying marine structural design. The coverage of fatigue and fracture criteria forms a basis for limit-state design and re-assessment of existing structures and assists with determining material and inspection requirements. Describing applications of risk assessment to marine and offshore industries, this is a practical and useful book to help engineers conduct structural design.*Presents modern structural design principles helping the engineer understand how to conduct structural design by analysis*Offers practical and usable theory for industrial applications of structural reliability theory
Download or read book Maritime Technology and Engineering III written by Carlos Guedes Soares and published by CRC Press. This book was released on 2016-12-01 with total page 1226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maritime Technology and Engineering 3 is a collection of papers presented at the 3rd International Conference on Maritime Technology and Engineering (MARTECH 2016, Lisbon, Portugal, 4-6 July 2016). The MARTECH Conferences series evolved from biannual national conferences in Portugal, thus reflecting the internationalization of the maritime sector. The keynote lectures and the papers, making up nearly 150 contributions, came from an international group of authors focused on different subjects in a variety of fields: Maritime Transportation, Energy Efficiency, Ships in Ports, Ship Hydrodynamics, Ship Structures, Ship Design, Ship Machinery, Shipyard Technology, afety & Reliability, Fisheries, Oil & Gas, Marine Environment, Renewable Energy and Coastal Structures. This book will appeal to academics, engineers and professionals interested or involved in these fields.
Download or read book Tree Biotechnology written by Kishan Gopal Ramawat and published by CRC Press. This book was released on 2014-04-01 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Forest trees cover 30% of the earth's land surface, providing renewable fuel, wood, timber, shelter, fruits, leaves, bark, roots, and are source of medicinal products in addition to benefits such as carbon sequestration, water shed protection, and habitat for 1/3 of terrestrial species. However, the genetic analysis and breeding of trees has lagged behind that of crop plants. Therefore, systematic conservation, sustainable improvement and pragmatic utilization of trees are global priorities. This book provides comprehensive and up to date information about tree characterization, biological understanding, and improvement through biotechnological and molecular tools.
Download or read book Quality Assurance of Welded Construction written by N T Burgess and published by CRC Press. This book was released on 1989-04-10 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first edition of this book was published, most developments in welding construction have been within the quality assurance element of the process rather than in welding technology itself.The continuous pressures from worldwide clients seeking better reliability from welded structures has focused much attention on to quality.The quality ch
Download or read book Structural Durability Methods and Concepts written by Ruediger Heim and published by Springer Nature. This book was released on 2020-05-29 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides methods and concepts which enable engineers to design mass and cost efficient products. Therefore, the book introduces background and motivation related to sustainability and lightweight design by looking into those aspects from a durability and quality point of view. Hence this book gives a "top-down" approach: What does an engineer has to do for providing a mass and cost efficient solution? A central part of that approach is the "stress-strength interference model" and how to deal with "stresses" (caused by operational loads) as well as with the "strength" of components (provided by material, design and manufacturing process). The basic concepts of material fatigue are introduced, but the focus of the volume is to develop an understanding of the content and sequence of engineering tasks to be performed which help to build reliable products. This book is therefore aimed specifically at students of mechanical engineering and mechatronics and at engineers in professional practice.
