Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Performability Engineering written by Krishna B. Misra and published by Springer Science & Business Media. This book was released on 2008-08-24 with total page 1331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dependability and cost effectiveness are primarily seen as instruments for conducting international trade in the free market environment. These factors cannot be considered in isolation of each other. This handbook considers all aspects of performability engineering. The book provides a holistic view of the entire life cycle of activities of the product, along with the associated cost of environmental preservation at each stage, while maximizing the performance.
Download or read book Probabilistic Risk Analysis written by Tim Bedford and published by Cambridge University Press. This book was released on 2001-04-30 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: A graduate level textbook on probabilistic risk analysis, aimed at statisticians, operations researchers and engineers.
Download or read book Risk Importance Measures in the Design and Operation of Nuclear Power Plants written by Ivan Vrbanic and published by . This book was released on 2017 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: In using risk-informed approaches for ensuring safety of operating nuclear power plants (NPPs), risk importance measures obtained from probabilistic risk assessments (PRAs) of the plants are integral elements of consideration in many cases. Obtaining these measures in appropriate forms is helpful for decision makers and can facilitate the use of risk information.
Download or read book Satisfying Safety Goals by Probabilistic Risk Assessment written by Hiromitsu Kumamoto and published by Springer Science & Business Media. This book was released on 2007-05-31 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a methodological approach to the goal-based safety design procedure that will soon be an international requirement. This is the first single volume book to describe how to satisfy safety goals by modern reliability engineering. Its focus is on the quantitative aspects of the international standards using a methodological approach. Case studies illustrate the methodologies presented.
Download or read book Guidelines for Chemical Process Quantitative Risk Analysis written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-08-27 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical process quantitative risk analysis (CPQRA) as applied to the CPI was first fully described in the first edition of this CCPS Guidelines book. This second edition is packed with information reflecting advances in this evolving methodology, and includes worked examples on a CD-ROM. CPQRA is used to identify incident scenarios and evaluate their risk by defining the probability of failure, the various consequences and the potential impact of those consequences. It is an invaluable methodology to evaluate these when qualitative analysis cannot provide adequate understanding and when more information is needed for risk management. This technique provides a means to evaluate acute hazards and alternative risk reduction strategies, and identify areas for cost-effective risk reduction. There are no simple answers when complex issues are concerned, but CPQRA2 offers a cogent, well-illustrated guide to applying these risk-analysis techniques, particularly to risk control studies. Special Details: Includes CD-ROM with example problems worked using Excel and Quattro Pro. For use with Windows 95, 98, and NT.
Download or read book Foundations of Risk Analysis written by Terje Aven and published by John Wiley & Sons. This book was released on 2004-01-09 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everyday we face decisions that carry an element of risk and uncertainty. The ability to analyse, communicate and control the level of risk entailed by these decisions remains one of the most pressing challenges to the analyst, scientist and manager. This book presents the foundational issues in risk analysis ? expressing risk, understanding what risk means, building risk models, addressing uncertainty, and applying probability models to real problems. The principal aim of the book is to give the reader the knowledge and basic thinking they require to approach risk and uncertainty to support decision making. Presents a statistical framework for dealing with risk and uncertainty. Includes detailed coverage of building and applying risk models and methods. Offers new perspectives on risk, risk assessment and the use of parametric probability models. Highlights a number of applications from business and industry. Adopts a conceptual approach based on elementary probability calculus and statistical theory. Foundations of Risk Analysis provides a framework for understanding, conducting and using risk analysis suitable for advanced undergraduates, graduates, analysts and researchers from statistics, engineering, finance, medicine and the physical sciences, as well as for managers facing decision making problems involving risk and uncertainty.
Download or read book Risk Assessment written by Marvin Rausand and published by John Wiley & Sons. This book was released on 2020-03-31 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces risk assessment with key theories, proven methods, and state-of-the-art applications Risk Assessment: Theory, Methods, and Applications remains one of the few textbooks to address current risk analysis and risk assessment with an emphasis on the possibility of sudden, major accidents across various areas of practice—from machinery and manufacturing processes to nuclear power plants and transportation systems. Updated to align with ISO 31000 and other amended standards, this all-new 2nd Edition discusses the main ideas and techniques for assessing risk today. The book begins with an introduction of risk analysis, assessment, and management, and includes a new section on the history of risk analysis. It covers hazards and threats, how to measure and evaluate risk, and risk management. It also adds new sections on risk governance and risk-informed decision making; combining accident theories and criteria for evaluating data sources; and subjective probabilities. The risk assessment process is covered, as are how to establish context; planning and preparing; and identification, analysis, and evaluation of risk. Risk Assessment also offers new coverage of safe job analysis and semi-quantitative methods, and it discusses barrier management and HRA methods for offshore application. Finally, it looks at dynamic risk analysis, security and life-cycle use of risk. Serves as a practical and modern guide to the current applications of risk analysis and assessment, supports key standards, and supplements legislation related to risk analysis Updated and revised to align with ISO 31000 Risk Management and other new standards and includes new chapters on security, dynamic risk analysis, as well as life-cycle use of risk analysis Provides in-depth coverage on hazard identification, methodologically outlining the steps for use of checklists, conducting preliminary hazard analysis, and job safety analysis Presents new coverage on the history of risk analysis, criteria for evaluating data sources, risk-informed decision making, subjective probabilities, semi-quantitative methods, and barrier management Contains more applications and examples, new and revised problems throughout, and detailed appendices that outline key terms and acronyms Supplemented with a book companion website containing Solutions to problems, presentation material and an Instructor Manual Risk Assessment: Theory, Methods, and Applications, Second Edition is ideal for courses on risk analysis/risk assessment and systems engineering at the upper-undergraduate and graduate levels. It is also an excellent reference and resource for engineers, researchers, consultants, and practitioners who carry out risk assessment techniques in their everyday work.
Download or read book Probabilistic Risk Assessment of Engineering Systems written by M. Stewart and published by Springer. This book was released on 1997-11-30 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Probabilistic risk and hazard assessments are applied to a wide range of engineering systems, mainly for regulatory reasons needed for development consent, system certification and occupational health and safety issues. The purpose of this book is to raise awareness of the limitations, uncertainties and other issues inherent in probabilistic risk analysis procedures. Probabilistic Risk Assessment of Engineering Systems describes: the importance of probabilistic risk assessment in decision making, i.e. risk management; types of risk and probabilistic risk analysis procedures; data needed for the conduct of probabilistic risk analysis; and acceptable/tolerable risk and other risk acceptance criteria. In essence, the book provides a multi-disciplinary and integrated explanation of risk assessment procedures that will enable the non-specialist reader to gain valuable insights into the development of risk analysis procedures. Practising engineers and graduate engineering students across a range of disciplines will find this book immensely useful.
Download or read book Introduction to Bayesian Estimation and Copula Models of Dependence written by Arkady Shemyakin and published by John Wiley & Sons. This book was released on 2017-03-03 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an introduction to Bayesian statistics, presents an emphasis on Bayesian methods (prior and posterior), Bayes estimation, prediction, MCMC,Bayesian regression, and Bayesian analysis of statistical modelsof dependence, and features a focus on copulas for risk management Introduction to Bayesian Estimation and Copula Models of Dependence emphasizes the applications of Bayesian analysis to copula modeling and equips readers with the tools needed to implement the procedures of Bayesian estimation in copula models of dependence. This book is structured in two parts: the first four chapters serve as a general introduction to Bayesian statistics with a clear emphasis on parametric estimation and the following four chapters stress statistical models of dependence with a focus of copulas. A review of the main concepts is discussed along with the basics of Bayesian statistics including prior information and experimental data, prior and posterior distributions, with an emphasis on Bayesian parametric estimation. The basic mathematical background of both Markov chains and Monte Carlo integration and simulation is also provided. The authors discuss statistical models of dependence with a focus on copulas and present a brief survey of pre-copula dependence models. The main definitions and notations of copula models are summarized followed by discussions of real-world cases that address particular risk management problems. In addition, this book includes: • Practical examples of copulas in use including within the Basel Accord II documents that regulate the world banking system as well as examples of Bayesian methods within current FDA recommendations • Step-by-step procedures of multivariate data analysis and copula modeling, allowing readers to gain insight for their own applied research and studies • Separate reference lists within each chapter and end-of-the-chapter exercises within Chapters 2 through 8 • A companion website containing appendices: data files and demo files in Microsoft® Office Excel®, basic code in R, and selected exercise solutions Introduction to Bayesian Estimation and Copula Models of Dependence is a reference and resource for statisticians who need to learn formal Bayesian analysis as well as professionals within analytical and risk management departments of banks and insurance companies who are involved in quantitative analysis and forecasting. This book can also be used as a textbook for upper-undergraduate and graduate-level courses in Bayesian statistics and analysis. ARKADY SHEMYAKIN, PhD, is Professor in the Department of Mathematics and Director of the Statistics Program at the University of St. Thomas. A member of the American Statistical Association and the International Society for Bayesian Analysis, Dr. Shemyakin's research interests include informationtheory, Bayesian methods of parametric estimation, and copula models in actuarial mathematics, finance, and engineering. ALEXANDER KNIAZEV, PhD, is Associate Professor and Head of the Department of Mathematics at Astrakhan State University in Russia. Dr. Kniazev's research interests include representation theory of Lie algebras and finite groups, mathematical statistics, econometrics, and financial mathematics.
Download or read book Risk Assessment Methods written by V.T. Covello and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much has already been written about risk assessment. Epidemiologists write books on how risk assessment is used to explore the factors that influence the distribution of disease in populations of people. Toxicologists write books on how risk assess ment involves exposing animals to risk agents and concluding from the results what risks people might experience if similarly exposed. Engineers write books on how risk assessment is utilized to estimate the risks of constructing a new facility such as a nuclear power plant. Statisticians write books on how risk assessment may be used to analyze mortality or accident data to determine risks. There are already many books on risk assessment-the trouble is that they all seem to be about different sUbjects! This book takes another approach. It brings together all the methods for assessing risk into a common framework, thus demonstrating how the various methods relate to one another. This produces four important benefits: • First, it provides a comprehensive reference for risk assessment. This one source offers readers concise explanations of the many methods currently available for describing and quantifying diverse types of risks. • Second, it consistently evaluates and compares available risk assessment methods and identifies their specific strengths and limitations. Understand ing the limitations of risk assessment methods is important. The field is still in its infancy, and the problems with available methods are disappoint ingly numerous. At the same time, risk assessment is being used.
Download or read book Probabilistic Safety Assessment and Management written by Cornelia Spitzer and published by Springer. This book was released on 2014-01-04 with total page 3803 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of papers presented at the PSAM 7 – ESREL ’04 conference in June 2004, reflecting a wide variety of disciplines, such as principles and theory of reliability and risk analysis, systems modelling and simulation, consequence assessment, human and organisational factors, structural reliability methods, software reliability and safety, insights and lessons from risk studies and management/decision making. This volume covers both well-established practices and open issues in these fields, identifying areas where maturity has been reached and those where more development is needed.
Download or read book The Owner s Role in Project Risk Management written by National Research Council and published by National Academies Press. This book was released on 2005-02-25 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective risk management is essential for the success of large projects built and operated by the Department of Energy (DOE), particularly for the one-of-a-kind projects that characterize much of its mission. To enhance DOE's risk management efforts, the department asked the NRC to prepare a summary of the most effective practices used by leading owner organizations. The study's primary objective was to provide DOE project managers with a basic understanding of both the project owner's risk management role and effective oversight of those risk management activities delegated to contractors.
Download or read book Nuclear Regulatory Commission Issuances written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1979 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Probabilistic Risk Assessment PRA written by U.S. Nuclear Regulatory Commission. Division of Risk Analysis and published by . This book was released on 1984 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Assessment of Power System Reliability written by Marko Čepin and published by Springer Science & Business Media. This book was released on 2011-07-29 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of power system reliability is demonstrated when our electricity supply is disrupted, whether it decreases the comfort of our free time at home or causes the shutdown of our companies and results in huge economic deficits. The objective of Assessment of Power System Reliability is to contribute to the improvement of power system reliability. It consists of six parts divided into twenty chapters. The first part introduces the important background issues that affect power system reliability. The second part presents the reliability methods that are used for analyses of technical systems and processes. The third part discusses power flow analysis methods, because the dynamic aspect of a power system is an important part of related reliability assessments. The fourth part explores various aspects of the reliability assessment of power systems and their parts. The fifth part covers optimization methods. The sixth part looks at the application of reliability and optimization methods. Assessment of Power System Reliability has been written in straightforward language that continues into the mathematical representation of the methods. Power engineers and developers will appreciate the emphasis on practical usage, while researchers and advanced students will benefit from the simple examples that can facilitate their understanding of the theory behind power system reliability and that outline the procedure for application of the presented methods.
Download or read book System Reliability Theory written by Marvin Rausand and published by John Wiley & Sons. This book was released on 2020-10-20 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook and reference for industrial statisticians and system reliability engineers System Reliability Theory: Models, Statistical Methods, and Applications, Third Edition presents an updated and revised look at system reliability theory, modeling, and analytical methods. The new edition is based on feedback to the second edition from numerous students, professors, researchers, and industries around the world. New sections and chapters are added together with new real-world industry examples, and standards and problems are revised and updated. System Reliability Theory covers a broad and deep array of system reliability topics, including: · In depth discussion of failures and failure modes · The main system reliability assessment methods · Common-cause failure modeling · Deterioration modeling · Maintenance modeling and assessment using Python code · Bayesian probability and methods · Life data analysis using R Perfect for undergraduate and graduate students taking courses in reliability engineering, this book also serves as a reference and resource for practicing statisticians and engineers. Throughout, the book has a practical focus, incorporating industry feedback and real-world industry problems and examples.
